invacare-canada
Results: 21
Forfar Flyer.
Child transporter can be used in institutions or at home. The transporter looks like a stretcher with a mesh fabric covering. The cart includes leg extensions to provide two heights: 12 inches or 34 inches from the floor. At the lower level the child can propell the cart along the floor. Two detachable side rails and a detachable head rail. Four 5 inch swivel casters. Chrome palted steel frame. Overall length 42.25 inches, overall width 22 inches. Weight: high position 34. 5 pounds, low position
Horizon Recliner (Models Hr300 & Hr400)
Reclining geriatric chair. The top of the back folds to the rear to facilitate attendant transfers, or the extension can be removed to convert the chair to a standard height back. Padded seat and back with vinyl upholstery. Adjustable headrest and removeable head wings. Adjustable seat depth: 14 to 19 inches. Overall width with casters 25 inches. Adjustable calf pad can be reversed to use as a knee pad. Adjustable height, flip back armsrests. Seat width 18 inches. Seat height 21 inches. Recline
Quad-Link Retractable Mount.
The Tarsys Quad-Link Retractable Mount is a joystick holder designed to provide wheelchair users with broader access to tables and desks. This link system allows the user to independently retract and move the joystick nine inches back from its normal driving system. It is also designed to maintain correct joystick orientation to allow the user to maneuver the wheelchair with the joystick in a fully retracted position. The link system is adjustable in order to accomodate the strength and ability
Tilt, The
Reclining wheelchair conversion transforms a normal reclining wheelchair frame into an orientation in space wheelchair frame. Maintains a fixed hip position. Seat width adjusts 14 to 18 inches. Seat depth adjusts 19 to 23 inches. Standard front rigging includes footrests only, does not include elevating legrest pads. Includes mounting hardware, one allen key, four wheelchair telescope tube spacers, and instructions included. Available in five models: tilt with no arms, full length arms, desk arm
Base Mate Modular Adaptive Seating System
Geriatric chair on wheeled based for persons ranging from 4 feet 2 inches to 6 feet 4 inches in height. Anterior wedged seat, seat depth adjustable 15 inches to 21 3/4 inches in 3/4 inches increments, lower back section is 11 1/2 inches high. Upper back section comes in three sizes. Quick release side support panels, angle adjusters to adjust seat to back angle, quick-release contoured headrest, and safety belt. Four casters, two with locks.
Chair Mate Adaptive Seating System
Seating system with ABS plastic solid base. Covered in vinyl upholstered foam. Drop hooks allow 9 different positions. As its highest, seat is level with seat rail and has 2 inches of tri-density foam. At its lowest, seat is 3 inches below seat rail. Terry cloth cover available. Lowest back height from seat 16 inches, the highest back height 4 inches above the push handles of standard adult wheelchair. Flat lateral supports adjustable both vertically and horizontally. Lateral supports available
Gc Recliners
Reclining geriatric chair. Tubular steel frame, chrome plated. Gray rubber 5 inch swivel casters with nylon hubs. Five position reclining back (maximum 70 degrees from the upright position) with easy access lock/release mechanism on the rear of the push bar. Adjustable wheelchair tray with raised rim. Height adjustable, padded, flip-back footrest. Options: fixed or adjustable height arms, elevating legrests, swingaway headrest.
Cpsc Foam In Place Seating Kit (Model Fp O1)
Casting frame and kit, model FP 01, allow custom molding of seat and/or back cushions on site. Foam is 2 part liquid Sunmate in soft, medium, or firm density. Casted cushions can be finished by trimming to fit and installing in modular plastic shells with lycra cover. Or cushions can be sent back to CPSC for vinyl covering and installation in shell. Shells available in 12, 14, 16, and 18 inch widths, any seat depth or back height. Full insert shell available with 90, 105, 120, 135 degree seat to
Cpsc Standard Back (Models Sb-01 Thru Sb-06)
Seating insert. The standard back has integral waist bolsters that contribute to central positioning of the lower spine. Chest bolsters may be added easily without modifying the upholstery.
Cpsc Wheelchair Trays (Models Lt 01, Lt 03, Lt 11, & Lt 13)
Wheelchair lapboards, ABS plastic. Safety rim around the perimeter keeps articles from sliding off. Inside edge may be modified as required. The tray attaches to any size wheelchair with brackets.
Cpsc Corner Seat & Cpsc Corner Seat With Tray (Models Cs-01 To Cs-03 & Ct-01 To Ct-03)
Corner Seat supports young children in a good seated position and helps them gain independent sitting. The seat is available in three height sizes: small (6 1/2 inches), medium (8 1/2 inches), large (11 inches) and comes with built in pommel and adjustable back support. Padding, seatbelts and/or chestbelts may be easily be added. Available with adjustable tray.
Cpsc Side Laying Positioners (Models Sl 01 & Sl 02)
Cpsc side lying positioners allow persons to lie on their left or right side. Soft, flexible foam, slightly troughed to help hold a person in place. Covered with durable Naugahyde. The deep trough positioner has the bottom sloped at 35 degrees to hold a person in place without use of belts or other restraints. The shallow trough positioner has the bottom sloped at 10 degrees with belts for firm support.
Cpsc Therapy Shapes: Ramps (Models Tr-01 To Tr-03) & Cylinders (Models Tc-01 To Tc-03)
Cpsc therapy shapes have been designed to allow optimum positioning. Firm but flexible foam, covered with Naugahyde. Wedges or ramps: 24 by 24 by 6 inches high, 24 by 24 by 8 inches high, or 24 by 24 by 10 inches high. Cylinders: 8 inches diameter by 36 inches long, 10 inches diameter by 52 inches long, or 12 inches by 52 inches long.
Cpsc Transfer Seat (Models Ts-02, Ts-04, & Ts-06)
Wheelchair insert with integral pelvic bolsters and tapered side sections for pelvic centralization. Seat has 7 slope and a flat front profile. Unit clips directly over the wheelchair seat frame tubes, it seats the persons lower than normal for easier transfers, while still providing appropriate positioning.
Cpsc Standard Pommel Seat (Models Sp-01 Thru Sp-06)
Wheelchair seat insert with integral pelvic bolsters and tapered side sections for pelvic centralization. Has a 15 degree wedged seat, a thigh shelf and an integral abduction pommel to provide good positioning and weight distribution. Standard cushion is removable and vinyl covered. Options include polyfoam or viscofoam cushion, lateral padding, reinforced side panels. 7 sizes: 11 inches wide by 13 inches deep, 12 by 14 inches, 13 by 17 1/2 inches, 14 by 18 inches, 15 by 20 1/ 2 inches, 16 by 20
Laurentian Wheelchair
Manual drive wheelchair, folding. Chrome plated steel frame. Available with swinging detachable footrests and fixed or detachable arms. Seat width 16 or 18 inches, seat height 19 5/8 inches. 8 inch molded front caster with sealed doubled ball bearings. Padded upholstery with reinforced upper back area. Versa Rim 24 inch rear wheels with nonsmoking gray rubber tires and sealed wheel bearings. Wheel locks. Space saver detachable arm available to reduce overall width of chair by 1 1/2 inches. Weigh
Laurentian Lightweight Wheelchairs
Lightweight manual drive wheelchair, folding. Lightweight steel and alloy frame, stainless steel rear wheels, 7/8 inch axle mounted through the backpost and pneumatic rear tires. Other features same as standard Laurentian wheelchair. Weight 33 to 36 pounds.
Mooney Rehabilitation Base (Model M128)
Wheelchair base for adding seating system. Chrome plated tubular steel frame with 12 inch spoked rear wheels, 8 inch casters at front, breaking and wheel lock folding system and backpost with push handles. Attendant propelled only.
Self Propelled Stretcher With Side Rails
Self propelled stretcher. Chrome plated tubular steel frame with 24 inch front drive wheels with hand rims and 8 inch rear casters. Foam pad upholstered in naugahyde vinyl. Rubber bumpers at each corner. Available with side rails. Height adjustable from 26 to 30 inches. Overall length 60 inches. Width 29 inches.
Bariatric Large-Base Quad Cane
The Bariatric Large Base-Quad Cane is a height- adjustable quad cane designed for use by individuals with balance and walking disabilities. Made of steel, this cane features a twist locking ring to provide additional security during height adjustment. Other features include a large-base footprint for maximum stability and walking assistance, large height adjustment ranges, and a PVC contoured hand grip. DIMENSIONS: Height adjustment ranges: (minimum) 4 to 11 inches, and (maximum) to 6 to 5
Bariatric Crutch Hand Grips-Solid
The Bariatric Crutch Hand Grips-Solid are crutch hand grips designed for use by individuals with lower extremity or walking disabilities. These handgrips are used on the manufacturer's model 8130 crutches and are replacement grips for these crutches. The contoured grips are designed to limit rotation and keep the user's hands comfortable. CAPACITY: 1,000 pounds. COLOR: Solid grey.