scooterville-discount-mobility
Results: 35
Sentra Plus
Sentra Plus is an adult manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish. SEAT: 16- or 18-inch width. Backrest with carry pocket. Dual axle provides transition of seat to hemi-level. UPHOLSTERY: Double-embossed black vinyl upholstery. ARMRESTS: Padded armrests with choice of removeable or removeable/adjustable-height full- or desk-length arms. CASTERS: Fron
Astaire Plus
The Astaire Plus is a lighweight adult wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish and dual axle that allows transition of seat to hemi-level. SEAT: 16-, 18-, 20-, or 22-inch width. UPHOLSTERY: Heavy-gauge flame-retardant black nylon upholstery. ARMRESTS: Removeable arm with padded nylon armrest. Removeable arm comes in a choice of desk- or full-arm styles, a
Comet Series 300
The Comet 300 Series are transport wheelchairs designed to transport individuals with mobility or cognitive disabilities who are unable to maneuver a wheelchair independently. FRAME: Steel folding frame in blue, red, or silver, depending on model. SEAT: The seat width is available in 17 inches (models 301, 317, 327), 17.5 inches (model 338), 18 inches (model 339), and 19 inches (models 309, 319, 329, 339). The seat depth is 16 inches. The distance from the seat to floor is 18 inches (model 330),
Shuttle
The Shuttle is a medium to large all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 46 x 24 inches with a 4.5-inch ground clearance and a turning radius of 36 inches. The base has an open ended design with ample foot space and a continuous heavy steel frame. The body is available in gray or mauve and features full fenders. This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the
Sidekick
The Sidekick is a small to medium all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 41 x 22 inches with a 3.5-inch ground clearance and a turning radius of 31 inches. The body is available in champagne or gray and features a covered battery area.This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the controls. Custom controls are available. RWD: Sealed transaxle rear wheel driv
Micro Scooter Lift (Model Al010)
The Micro Scooter Lift, model AL010, is a hitch-mounted scooter carrier designed for use by individuals with mobility disabilities or spinal cord injury. This carrier is designed for lightweight micro or travel type three-wheel scooters. This compact carrier with a motorized lift can be mounted on a Class I, II, or III trailer hitch. The carrier folds manuallly and has a "hold down foot" feature for securing the scooter. POWER: Uses a battery and a supplied electrical harness with full-length le
Universal Inside-Out Lift (Model Al065)
The Universal Inside-out Lift, model AL065, is a wheelchair or scooter van loader designed for use by individuals with mobility disabilities or spinal cord injury. This Class II or III hybrid mounts outside the vehicleand puts the scooter or chair inside, using a boom with a range of 100 degrees. The loader features weather resistant construction and a selection of docking devices for every scooter or chair. POWER: Uses battery and supplied electrical harness with full-length leads that attach
Excel K3 Lightweight Wheelchair
The Excel K3 Lightweight Wheelchair is a lightweight manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Carbon steel frame with triple chrome plating. SEAT: 16 or 18 inches wide. UPHOLSTERY: Black nylon upholstery. ARMRESTS: Removable, padded, nylon upholstered armrests in a choice of desk length (for a 16- and 18-inch wide chair) or full length (18-inch chair only). CASTERS: Front casters. WHEELS: Rear wheels with composite handrims. FOOTRESTS: Swing-away detac
Zip'r3 Travel Scooter
The Zip'r3 Travel Scooter is a portable scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 36.4 x 19.5 inches. The ground clearance is 2.1 inches and the turning radius is 30 inches. Anti-tip wheel is included. This scooter disassembles into four pieces for travel. CONTROLS: Large control panel. SEAT: Foldable, height-adjustable swivel chair with metal frame and foam padding. ARMRESTS: Included. WHEELS: One 2 x 7.5 inch solid front tire and two 2.5 x 7.5 inch solid
Covered Outside Lift (Model Al3000)
The Covered Outside Lift, model AL3000, is a hitch-mounted scooter or powered wheelchair carrier designed for use by individuals who use wheelchairs. The plastic watertight cover keeps power chairs and scooters safe while the spring-assisted operation makes the cover easier to open and close. The carrier can be mounted on a class II or III trailer hitch and includes an integrated license plate mount. OPTIONS: Swing-away option. CAPACITY: 350 pounds. WARRANTY: Three-year transferable warranty.
Buzzaround Lite 3-Wheel Scooter (Model Gb-103)
The Buzzaround Lite 3-wheel Scooter, model GB-103, is a lightweight, portable scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 37 X 21.25 inches. The turning radius is 31 inches and the ground clearance is 2 inches. The frame has rear suspension and disassembles into 4 pieces for transport. This scooter is available in blue or red. CONTROLS: 45-amp programmable controls. SEAT: 360 degree swivel seat with fold-down backrest. UPHOLSTERY: Black viny
Buzzaround Lite 4-Wheel Scooter (Model Gb-105)
The Buzzaround Lite 4 -wheel scooter, model GB-105, is a lightweight, portable scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): 37 x 21.25 inches. The turning radius is 41.75 inches and the ground clearance is 2 inches. The frame disassembles into 4 parts for transport. The scooter comes with three sets of interchangeable shroud panels in vermillion red, arctic blue, and sahara. CONTROLS: 45 amp programmable drive. RWD: 24-volt direct current s
Companion Ii 4-Wheel Scooter (Model Gc-421)
The Companion 4-Wheel Scooter, model GC-421, is a compact, 4-wheeled scooter designed for use indoors and outdoors by individuals with mobility disabilities. The scooter comes standard with a front basket, headlight, tail light. FRAME(LxW): 49.5 x 23.75 inches. The turning radius is 58.5 inches and the ground clearance is 4 inches. This scooter disassembles for transport and has a carpeted floor mat and expanded foot and leg room. The body is available in vermillion red, Arctic blue, or Sahara.
Pioneer 2Dlx Twin Front Wheel Compact Scooter (Model S246)
The Pioneer 2 DLX S246 Twin Front Wheel Scooter is designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include front basket, front bumper, and multi-function display console. FRAME (HxLxW): 34 x 42 x 23 inches. The ground clearance is 2 inches and the turning radius is 41 inches. This scooter disassembles for storage or transport. Color choices are blue and red. CONTROLS: Dynamic Rhino 70A controller with adjustable tiller and thumb lever handle bar s
Compact Transporter 700 (Model 700, 700E, 700W, & 700We)
The Compact Transporter 700 is a lightweight, attendant-driven transport wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 28.5 x 37 or 39 x 20.75 inches. The chrome plated frame folds; the folded dimensions (LxW) are 23.5 x 10 inches. Anti-tippers and an anti-folding device are optional. SEAT (LxWxH): 16 x 17 or 19 x 19 inches. A folding 16.75-inch high back is standard. A seatbelt is optional. UPHOLSTERY: Bl
Large Glove Box
The Large Glove Box is an under seat caddy for a wheelchair or scooter designed for use by individuals with mobility disabilities. Made of water-resistant nylon, this caddy attaches under the seats of most scooters and motorized wheelchairs with the included hook-and-loop straps. DIMENSIONS: 12 x 5 x 9 inches.
Diestco Fabric Oxygen Tank Holder (Models B6211 & 6311)
The Diestco Fabric Oxygen Tank Holder is a oxygen cylinder carrying case designed for use by individuals with mobility and respiratory disabilities. Made of water-resistant nylon, this case attaches to wheelchairs and scooters with hook-and-loop straps. Model B6211 is designed for use on scooters with captain-style seats or powered wheelchairs without push handles. Model B6311 is designed for manual and transport wheelchairs with push handles.
Diestco Standard Armrest Saddle Bag (Model B2111)
The Diestco Standard Armrest Saddle Bag, model B2111, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch can be mounted on the inside or outside of an armrest on a scooter or wheelchair. This pouch has one flap-covered main compartment and two small outside pockets for a cell phone or glasses. DIMENSIONS(WxLxD): 10 x 8 x 3 inches.
Diestco Down-In-Front Wheelchair Bag
The Diestco Down-in-Front Wheelchair bag is an under seat pocket desighed for use on manual wheelchairs without armrests. Made of water-resistant nylpn, this single-pocket bag attaches to the lower front frame of the wheelchair behind the user's legs with buckle-closure straps. DIMENSIONS(WxLxD): 11 x 6 x 3 inches.
Diestco Standard Walker Bag
The Diestco Standard Walker Bag is a carrying bag for walker designed for use by individuals with walking or balance disabilities. Made of water-resistant nylon, this bag attaches to the side of the walker using four attachment straps. This bag has a flap cover with hook-and-loop closure.
Diestco Deluxe Walker Bag
The Diestco Deluxe Walker Bag is a carrying bag for walker designed for use by individuals with walking or balance disabilities. Made of water-resistant nylon, this bag attaches to the side of the walker using four attachment straps. This bag has a side pocket with hook-and-loop closure, a front zipper pocket, front and side mesh pockets, and a back pocket. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.
Diestco Armrest Front Bag
The Diestco Armrest Front Bag is a caddy for a scooter or powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This large basketball-shaped and sized bag mounts to the end of armrests with the included straps and is detachable when not in use. Made of water-resistant nylon, this bag has a lightweight aluminum frame to retain the shape and a zippered top cover. DIMENSIONS: 7 inches high x 12 inches in diameter.
Diestco Basket Liner
The Diestco Basket Liner is a liner for scooter baskets designed for use by individuals with mobility or lower extremity disabilities. Made of water-resistant nylon, this liner has a zippered top. DIMENSIONS(WxLxD): 13 x 10 x 7 inches.
Diestco Deluxe Armrest Saddle Bag (Model B2121)
The Diestco Deluxe Armrest Saddle Bag, model B2121, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch can be mounted on the inside or outside of an armrest on a scooter or wheelchair. This pouch has one flap-covered main compartment, side pockets, a zippered interior pocket, and two small outside pockets for a cell phone or glasses. DIMENSIONS(WxLxD): 10 x 8 x 3 inch
Diestco Deluxe Scooter Tiller Bag
The Diestco Deluxe Scooter Tiller Bag is a scooter fron pouch designed for use by individuals with lower extremity or mobility disabilities. Made of watter-resistant nylon, this bag has a front zippered pocket, a front mesh pocket, a side pocket, and an inside pocket. It attaches to the handlebars and can be mounted in front or behind the tiller. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.
Diestco Deluxe Seatback Bag
The Diestco Deluxe Seatback Wheelchair Bag is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has several pockets, including a back mesh pocket, a zippered back pocket, side pockets, and
Diestco Extra Large Armrest Saddle Bag (Model 2131)
The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a front zippered pocket, mesh pockets in front and on the sides, an inside pocket, side loops, and a secret pocket. DIMENSIONS(WxLxD): 12 x 16 x 2 inches.
Diestco Fabric Cane And Crutch Holders (Models B6213 & B6313)
The Diestco Fabric Cane and Crutch Holders are cane or crutch holders for wheelchairs or scooters side pouch designed for use by individuals with mobility, walking, or lower extremity disabilities. Made of water-resistant nylon, this carrier is shaped similarly to a golf bag and is available with a mounting system for use on captain-style scooter seats or wheelchairs without push handles (model B6213) or on wheelchairs with push handles (model 6313).
Diestco Large Armrest Saddle Bag (Model B2125)
The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a variety of pockets and compartments. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.
Diestco Large Front Walker Bag (Model 5412)
The Diestco Large Front Walker Bag, model 5412, is a carrying bag for walker designed for use by individuals with walking or balance disabilities. Made of water-resistant nylon, this bag attaches to the front of the walker using straps. This bag has a large pocket in back and two front mesh pockets. DIMENSIONS(WxLxD): 17 x 12 x 2 inches.
Diestco Mid-Range Seatback Bag (Model B1117)
The Diestco Deluxe Seatback Wheelchair Bag, model B1117, is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has several pockets, including a back mesh pocket, a zippered back pocket, and
Diestco Monster Seatback Bag (Model B1113)
The Diestco Monster Seatback Bag, model B1113, is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has a lightweight aluminum frame to keep it open. DIMENSIONS(WxLxD): 13 x 18 x 10 inches.
Power Chair Joystick Cover (Model V2200)
The Power Chair Joystick Cover, model V2200, is a powered wheelchair control cover designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. Made of urethane covered water-resistant nylon with a transparent plastic panel over the joystick, this cover fits around the controller to protect it from dirt and moisture while still allowing use. DIMENSIONS (HxWxD): 14 x 5 x 4 inches.
Winnie Lite Supreme Aluminum Rollator
The Winnie Lite Supreme Aluminum Rollator is a three-wheeled rollator designed for use by individuals with walking or balance disabilities. This folding rollator has height adjustable handles with adjustable loop lock brakes, a carry pouch, and lightweight solid wheels. OPTIONS: Carrying basket. DIMENSIONS(HxWxD): 30 x 24 x 24 inches. The handle height adjusts from 32 to 39 inches to accommodate users 5 feet, four inches tall to six feet tall. The casters are 7.5 inches in diameter. WEIGHT: 11 p
Rear View Mirror For Scooter
The Rear View Mirror for Scooter is designed to create greater visibility for scooter users without requiring that the rider turn his/her head or body. This adjustable unit mounts to the end of the scooter handlebar and has a plastic base and a glass mirror. DIMENSIONS: The mirror is 3.5 inches in diameter. WEIGHT: 1 pound.