care-electronics-inc
Results: 6
Wandercare Monitoring System (Model 100T)
The WanderCARE Monitoring System, model 100T, is a portable wandering patient system designed to alert caregivers when an individual leaves a designated area. The WanderCARE transmitter, coded to provide a personal identifier for the wearer, can be worn on the individual's wrist, ankle, or belt or carried in a special fanny pack. The device reports to the control station approximately every 10 seconds, providing information on the wearer's activity level and location on a 32-character backlit l
Deluxe Occupancy Control
The Deluxe Occupancy Control is a wandering patient system designed for use by individuals who are at risk for falls when leaving a bed, chair, or wheelchair without assistance. The system utilizes a control unit and a pressure-sensitive chair pad or bed pad to monitor when the individual rises without assistance, causing an alarm to sound. Features include five alarm sounds, adjustable alarm delay, automatic alarm reset, nurse-call interface, and system status light. POWER: Uses batteries; the
Pull-For-Help Emergency Caller
The Pull-for-Help Emergency Caller is an emergency alert system designed for use by seniors and individuals with disabilities. The system comprises a waterproof cordless pull-for-help transmitter that can be worn around the neck or carried in a pocket and a portable base unit. This system sends a personalized, pre-recorded emergency voice message of up to 20 seconds to four different numbers. The system dials each number up to three times until the message is delivered. When the message is deliv
Patientcare Wanderer Monitoring System
The PatientCARE Wanderer Monitoring System is a wandering patient system designed for institutional use. The system consists of door monitoring receivers capable of monitoring up to 50 individuals with wrist-worn transmitters, each with a unique digital code. When an individual wearing a transmitter approaches a monitored door, the system is alerted and waits for the door to be opened. When the door is opened and the individual is within a pre-set range, an audible alarm sounds and the transmit
Patientcare 16 & Patientcare 64 Wireless System
The PatientCARE 16 and the PatientCARE 64 Wireless System is a wandering patient system designed for institutional use. This system enables wireless monitoring of nurse call buttons, pendants, and other alarms from a central unit. The system uses 900 megaHertz (MHz) to supervise all transmissions within a facility, providing mobile monitoring.
Care Wet-Sense Incontinence Monitoring System
The CARE WET-SENSE Incontinence Monitoring System is an incontinence alarm designed for use in long-term care settings. The system includes a control unit which is mounted on or near the bed and a thin, flexible sensor which is taped to the porous side of a bed pad or other absorbent item. The sensor is a flexible electronic circuit that is connected to the control unit by a cord. When moisture is absorbed by the bed pad, the sensor detects it, causing a bright red light to flash on the control