The 3459 Hard Shell Ear Covering is an accessory for Danmar protective helmets. The coverings are made of an inner layer of soft ventilated foam and an outer covering of tough polycarbonate plastic. The coverings attach to hard shell helmets and extend down over the ear area. They can be ordered with a new helmet or added to a previously purchased helmet.
The 3460 Soft Foam Ear Covering is an accessory for the 9820 Soft Shell Helmet. The coverings are made of soft ventilated 0.5-inch thick foam that extends over the ear openings on a soft shell helmet.
The 3462 Extra Llong Face Guard Modification is an accessory for Danmar protective helmets (see separate entries). This guard is a full 1-inch longer than the standard guard, and also has larger eye and mouth openings. The guard is made of clear plastic with foam padding under the chin and around the sides of the face.
The 3464 Rear Foam Extension is an accessory for Danmar protective helmets designed to provide additional head protection and ventilation. The extension attaches to the rear of the helmet, and is made of vinyl coated shock absorbing foam. DIMENSIONS: Purchaser specifies how far down the foam area should be extended. Available lengths are 0.5, 0.75, 1, 1.25, 1.5, 2 and 3 inches. Other lengths are available upon request.
The 3465 Rear Hard Shell Extension is an accessory for protective helmets designed to provide additional ventilated coverage by extending the foam liner and polyethylene shell. SIZES: Length shell should be extended is specified by the buyer.
The 3468 Foam Visor is an accessory for protective helmets. This padded visor attaches to the front of the helmet and extends out approximately 3 inches. The visor is made of closed cell foam with vinyl coatingand retains compression resistance.
The 3469 Quick Release Buckle Chin Strap Top of Helmet is an accessory for protective helmets to be used in place of a regular chin strap when frequent attempts to remove the helmet occur. To release the strap, both sides of the buckle need to be squeezed simultaneously. Two styles are available: an under the chin side opening or top of helmet opening.
The 7637 Cush-in-Pads are helmet accessories made of lightweight, medical grade foam pads that allow for more individualized sizing of helmets. The material absorbs perspiration and may therefore provide a cooler environment within the helmet. These oval shaped pads with adhesive backing are easily positioned, fully washable and dry quickly. Sold in sets of 4. SIZES: Small and Large.
The 9817 Halo Helmet is a protective helmet designed for wear by individuals who have balance disabilities, head/skull injuries, or seizures who do not need full head coverage. A band of 5/8-inch foam surrounds the head at the forehead level. It extends down to the temporal area on each side of the head and to the occipital area at the back. The top has adjustable crisscross straps to help stabilize the helmet on the head. An adjustable chin strap is included. OPTIONS: 7640 Velcro Chin Strap, 34
The 9820 Soft Shell Helmet is a protective helmet made of 1/2-inch shock absorbent, lightweight vinyl coated foam. The helmet has a woven chin strap with adjustable buckle and snap fastener. This helmet is washable. OPTIONS: 3460 Soft Foam Ear Coverings, 3466 Reinforced Liner, 3467 Reinforced Seams, 3469-U Quick Release Buckle Chin Strap Under Chin, 3470 Eyeglass Relief Area, 3472 Custom Strapping System, 3469 Quick Release Buckle Chin Strap Top of Helmet, and 3468 Foam Visor. SIZES: Infant, Ext
The 9821 Hard Shell Helmet is a protective helmet made of polyethylene with a shock absorbent 1/2-inch vinyl coated foam liner. The woven chin strap has an adjustable buckle and snap fastener. Both the liner and shell are ventilated, and the shell is washable. SIZES: Extra-Extra Small, Extra Small, Small, Medium, Large, Extra Large, and Extra-Extra Large. COLOR: Pink, casa tan, royal blue, and black. These custom colors are available for an additional $26: light almond, baby blue, bright blue, f
The 9822 Hard Shell Helmet with Face Guard is a protective helmet designed to provide all-over head coverage. The face guard is made of Lexan polycarbonate plastic and has an eye level opening for unobstructed vision, and a mouth opening. Both openings provide ventilation. The face guard has a foam liner for comfort, and the entire face guard will pivot onto the top of the helmet. The helmet and face guard are washable. OPTIONS: Various faceguard options, modifications and optional addons are av
The 9820 Chin Guard is a helmet accessory made of 1/2-inch shock absorbent, vinyl coated foam. The guard has small openings for ventilation and a chin strap with nylon buckles. This washable accessory attaches to all Danmar soft or hard shell helmets (see separate entries). SIZES: Small or Large. COLOR: Standard colors are pink, royal blue, and casa tan. These custom colors are available for an additional $26: forest green, bright blue, black, baby blue, light almond, silver/gray, maroon, orange
The 9824 Hard Shell Helmet with Face Bar is a protective helmet designed for use when direct, face forward impact is probable. The helmet is made of polyethylene and the face bar of clear, Lexan polycarbonate plastic. This washable helmet has a woven chin strap with adjustable buckle and snap fastener. OPTIONS: 3459 Hard Shell Ear Coverings, 3460 Soft Foam Ear Coverings, 3465 Rear Hard Shell Extension, 3466 Reinforced Liner, 3467 Reinforced Seams, 3469-U Quick Release Buckle Chin Strap Under Chi
The 9825 Deluxe Hard Shell Helmet is a protective helmet made of polyethylene with a vinyl coated 1/2-inch thick foam liner. The helmet has a hard visor with a decorative chrome strip on it. The woven chin strap has a soft plastic chin cup. SIZES: XXSmall, XSmall, Small, Medium, Large, and XLarge. WEIGHT: 18 ounces. COLOR: Black, casa tan, pink and royal blue are standard. Custom colors are available for an additional charge. MODIFICATIONS AND OPTIONAL ADDONS: 3459 Hard Shell Ear Coverings, 3465
The 9836 Newborn Cap is a protective helmet for infants. The cap is made from soft, 0.375-inch shock absorbent, ventilated foam that can be trimmed in front or back. The non-fabricoated foam edge revealed from cutting is still waterproof and can be cleaned. DIMENSIONS: 12 x 13 inches with 1/4 inch foam, 12 x 13 inches with 3/8 inch foam, and 15 x 16 inches with 3/8 inch foam. COLORS: Pink or baby blue. SIZES: Small, medium or large
The Adapta Helmet is a protective helmet designed to provide head protection for adolescents and adults with balance or mobility disabilities or seizures. This helmet features a molded polyethylene shell with a thick foam inner lining. It has air vents to keep the head cool. The Adapta Helmet fits head circumferences that measure from 16 to 26 inches. OPTIONS: Replacement chin strap. DIMENSIONS: Measures 6 inches from top to ear hole.
The Boomerang Helmet is a protective helmet designed to provide head protection for infants and toddlers with balance or mobility disabilities. The helmet features an extended coverage EPS foam liner with Tight-Fit Microshell, PinchGuard buckle, a foam visor, eight air vents and colorful graphics. SIZES: Fits head circumferences ranging from 18.5 inches to 19.75 inches when measured around the head 1 inch above the eyebrows. WEIGHT: 9 ounces. COLOR: Blue Trucks, Red Elephant Baseball, or Pink Ra
Designed to protect the eyes of the visually impaired student during training activities performed under black light, a form of ultraviolet light. It provides almost total blockage of ultraviolet light, while permitting visible light to pass through. This allows special fluorescent materials to retain their "glowing" appearance. It is sized for a child and made of white cotton, trimmed in blue with adjustable headband. Ninety-eight percent of the ultraviolet light is blocked by the visor shield
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Cosmetically acceptable helmet which can be worn under a cap, wig, or other inconspicuous headwear by individuals who are seizure-prone. Describes development and fabrication of a lightweight, well fitting, well ventilated, easy to clean and cosmetically acceptable (inconspicuous) helmet for persons who are prone to have seizures or to fall. Discusses tests of materials, and vacuum-form construction of the helmet on a plaster cast of the client's head,
The Gripper Prehensor is a helmet with reacher designed for individuals with severe physical disabilities. The grip unit is mounted to the top of a lightweight bicycle helmet which virtually eliminates any wearer fatique. The device enables users to pick up parts at their workstation when activated by a capability switch.
Protective helmet with face guard allows unrestricted body movement for individuals with severe seizure activity. Hard outer shell encompasses 1/2 inch shock absorbent foam liner. Woven chin strap and buckle fastener. Plasticized in sturdy hand washable vinyl. Face guard made of polycarbonate has lifetime warranty against breakage. To size measure head circumference at eyebrow. Extra small 19 to 19.5 inches, small 21 to 22 inches, medium 22 to 23 inches, large 23 to 24 inches, extra large 25 to
An activity helmet, models 2230, 2231, 2232, and 2233, is a protective light weight helmet for children and adults who have equilibrium or coordination problems. It is made of lightweight, protective materials and can help reduce the risk of injury during play or therapy session. Adjustable chin strap and velcro backed pads allow adjustable sizing. SIZES: Child and Adult small, medium and large. GUARANTEE: One full year from purchase date.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: High impact lightweight face protection mask intended to protect the faces of epileptic and cerebral palsy patients during seizures. Mask is made of fiberglass resin which is mixed with white pigment. Resin is vacuum molded and cured for 6 to 8 hours at room temperature. Excess material is trimmed with saw. Eye and mouth openings are cut out and then sanded. SKILLS REQUIRED: Plastics. TITLE: Lightweight Face Mask JOURNAL: NASA Tech Briefs REF: Summer 1
The Playmaker Gamebreaker is a protective helmet designed for use by individuals with balance disabilities, hemophilia, seizures, and autism and others who are at risk of head, skull injuries. Designed to provide protection to the back and sides of the head, this helmet features a hook and loop chin strap combined with adjustable laces in the back to provide a custom fit for each individual. The helmet is made of closed EVA rubber foam. Lycra surrounds the outer shell, allowing air to flow throu
The Playmaker Guardian is a protective helmet designed for use by individuals with balance disabilities, hemophilia, seizures, and autism and others who are at risk of head or skull injuries. This helmet is designed to provide protection to the back and sides of the head for individuals in danger of head injury. Features include an adjustable chin strap to provide a custom fit, and a web shell that allows for ventilation of the head to assist in cooling. This washable helmet is made of closed EV
The ProtectaCap is a protective helmet designed for infants, children, youth, and adults. The cap may be used post-surgery, for therapeutic activities, hydrocephalus, microcephalus, seizures, shunts, neonatal or geriatric care, and water therapy, ProtectaCap provides maximum head coverage, along with maximum hearing and ventilation. This custom-fitting protective headgear is made from impact-absorbant Ensolite foam, features a soft cotton-knit chin strap with a velcro closure, and is covered in
The ProtectaCap Plus is a rigid protective helmet designed for infants, children, youth, and adults. Designed to bridge the gap between soft and hard helmets, this cap may be used post-surgery, for therapeutic activities, hydrocephalus, microcephalus, seizures, shunts, neonatal or geriatric care, and water therapy, ProtectaCap Plus provides maximum head coverage, along with maximum hearing and ventilation. This custom-fitting protective headgear is made from impact-absorbant Ensolite foam, feat
The Thumper Bumper is a protective helmet designed for wear by adults and children with sensory and motor developmental delays. Seven strategically located padded segments, including a generous brow pad, protect the head during controlled activities. The preshrunk cotton hat has polyester padding and folds for storage. This helmet is machine wash and dry. SIZES: Child size fits heads up to 21 inches. Adult size fits heads up to 25 inches. To determine the size, meaure in a complete circle sta
The Toppen, model 77, is a protective helmet designed for use by individuals with balance, seizure, mobility, or cognitive disabilities. This lightweight, ventilated helmet has a nylon outer shell and a cotton lining. The chin strap has a thread-through buckle. SIZES: Infant to adult sizes. This helmet can be machine washed in cold water and line dried. DIMENSIONS: For head circumferences 18,19,20,21,22,23,or 25 inches. COLOR: Blue exterior with a red lining.
Protective helmet made of 5/8 inch thick foam. Helmets easily wipe clean. Reinforced chin strap. Football helmet type styling protects nape of the neck and sides of the head. Red or gold. Model T1237 fits boys 9 to 12 years. Model T1238 fits men's head sizes 6 7/8 to 7 1/4. Model T1239 fits men's head sizes 7 3/8 to 7 3/4.