The Connectorail System is a handrail system for portable ramps. The system consists of non-welded, pre-engineered pipe railing designed to be assembled on site. A full range of stock components for use on handicapped access ramps is available. DIMENSIONS: 1.25 to 1.5 inches IPS, with brackets to provide 1.5 inch wall clearance. Available in 20 foot lengths only.
Double Bar Handrails are handrails designed for use on wheelchair ramps to provide support for users with balance or walking disabilities. The railings are made from galvanized or schedule 40 steel and are designed for permanent or semi-permanent installation. They come in sections which can be used individually or as a component of a larger ramp system. Double bar construction provides an added level of safety by adding a second support bar 16 inches below the handrail bar. Railings can be moun
Handi-Ramp Single Bar Handrails are ramp handrails designed for use by individuals with balance, mobility, or walking disabilities. Constructed of galvanized or schedule 40 steel, these handrails help reduce slips and falls. The single rail bar can be used on stairways, ramps, pools, decks, escalators, porches, walkways, platforms, bridges and machine barriers. The handrails can be bolted directly onto the system or slid into the receiver tubes which are welded onto the HandiRamp ramp systems (s
The Roll-A-Ramp Handrail is a handrail for portable ramp designed for use by individuals with balance, mobility, or walking disabilities. This handrail is designed to install on a Roll-A-Ramp portable ramp (see separate entry). Three brackets hook onto one edge of the ramp, and the vertical poles of the handrail fit into the brackets and are secured with one bolt. To remove the handrail, the single bolt is loosened and the rails are lifted out of the brackets. The handrail can be installed and r
Handi-Ramp Vertical Picket Hand Rails are ramp handrails designed for use by individuals with balance, mobility, or walking disabilities. Constructed of high-grade galvanized or schedule 40 steel, these rails have vertical pickets for safety. They can be mounted onto a Handi-Ramp ramp system by bolting them on or by sliding them into receiver tubes which are welded onto the system, and are secured by bolts or quick- release pins. Therails are available with or without a ramp system. DIMENSIONS: