The 4-Square Pillow provides a soft, safe spot for reading, napping or daydreaming. Perfectly sized for all ages.
The Child's Bath Position Aid is a child bath support designed to support the child in the long sitting position in the bath. This support features an aluminum frame, adjustable double chest belts and a lap belt with plastic snap buckles, and a plastic foam seat support covered in open-mesh vinyl knit. Foam cushions protect the tub surface. OPTIONS: A 5-inch or 7-inch tray to covert the aid to a floor sitter is available. DIMENSIONS (LxWxH): The frame is 24 x 16.25 x 14 inches.
The Convertible Children's Chair is a floor sitter designed for use by children with physical and neurological disabilities. Designed for children aged 0 to 3, this sitter features a large, see-through tray that surrounds the child on three sides, a bucket-style seat with expandable trunk supports, and a separate snap-on abductor seat. The tray can also be used independently of the seat.
ABS plastic seat ($202) and back are vacuum-formed separately and assembled to suit child. Unit sits directly on floor, with child long-sitting. Leg abduction support wings are attached to slots in base to allow adjustment of position. Available in one size for children about one to five years of age. Can be ordered with higher back, head support, seat belt or chest belt, knee straps, toy bar, or padded seat and back covers. ABS table ($180) with chromed steel frame adjusts from 9 to 11 inches i
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Rustic aids are simple aids meant for outdoor use. Simple chairs or back rests for person sitting on the ground. Instructions for a simple floor seat or corner chair for use when sitting on the ground. Drive stakes with points into the ground side by side in a pattern of a square or triangle with a 90 degree angle. The front stakes should be lower to allow movement of the arms. Includes drawings. SKILLS REQUIRED: Assembly. AUTHOR: Caston, D. TITLE: Eas
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Legless seat with sides to allow a child with poor body support to sit on the floor to play with other children. Instructions for building a seat, made of plywood, with sides to help support a child. Includes drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir Press: p 30-31. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC CALL NUMBER: R1798 PAGES (i
CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities with floor-level seating and positioning. The legs were cut off commercial plastic children's chairs and the edges smoothed. Four wooden holding blocks were glued to the underside of the chair and the chair was mounted to a hoop pine plywood base by screwing through the base into the holding blocks. An adjustable pelvic belt was fitted to the chair, using stainless steel bolts to attach it to the base. A slot was cut in th
The Foor Sitter is designed for use with children with balance, neurological, and physical disabilities. This lightweight, wipe clean plastic seat is designed to provide very firm back and lateral support and has an integrated gently molded pommel. SIZES: Child, model 7FLOSC, and junior, model FLOSJ. DIMENSIONS: The child's model accommodate 7 inch hips and is 9 inches from front to back. The back height is 7 inches. The junior model accommodates 10 inch hips and is 13 inches from front to back.
Ziggy is one-of-a-kind cushion that can be used for positioning, support, comfort and imaginative play.
The Leckey Squiggles Early Sitting System (ESS) is a 3-in-1 sitting system designed to provide support in sitting for children up to 4 years and 40 pounds with mobility and physical disabilities. The Leckey Squiggles ESS encourages 3 different types of sitting: 1. Dynamic Sitting – providing support to the trunk that moves with user's movements (this is a side view); 2. Long Sitting – sitting with legs out straight, often used to help stretch out the hamstring muscles on the back of the legs; an
The MSS Tilt and Recline model 4635 and model 4636 are pediatric positioning seats designed to provide growth adjustments and optimum positioning for children with physical or neurological disabilities. FRAME: The chair is available with in a small low frame (model 4635, or medium high frame (model 4636). Each chair can be converted to a floor sitter. The low frame (small) l model raises height by 3 inches, and the high frame (medium) model raises height by 10 inches. SEAT (WxD): The seat is 9 x
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Lightweight back rest with a waterproof sitting area. Backrest made with 2 pieces of plywood 12 by 16 inches drilled at the top and strung together with strong twine, 2 pieces of twine on the bottom end of the boards so they open to the proper angle, and a piece of plastic coated cloth glued to the bottom of one of the boards for the child to sit on. COMMENTS: Suggests working with a therapist to determine proper angle and any necessary harness. SKILLS
Floor sitter with padded right angle seat to support head and torso, maintaining leg extension. Y-strap, leg abductor, chest strap, six leg straps, two hip pads, two head support pads standard. Includes tilt blocks to recline entire seat. Fabricated of birch plywood and hard maple. Stain and mildew resistant pads with vinyl covers in blue or brown. Pads snap off for easy cleaning. Optional trays available: 12 by 19, or 16 by 24 inches. K8FS small, 24 inch back height, 28 inch base length. K9FS m
The Corner Floor Sitter is a floor corner chair designed for use by children with balance, neurological, or lower extremity disabilities. Designed to provide positioning for children who need trunk support while sitting on the floor, this chair is made of laminated hardwood and has a padded, three-sided back, an adjustable hip strap, and a padded chest strap that can be placed at varying heights. Stabilizers assure a secure, non-tip base. OPTIONS: Abductor. SIZES: Model E610 is small and model E
Seat2Go is a floor sitter and positioning seat designed for use by children with balance, neurological, or severe physical disabilities. This soft support has a contoured seat that prevents the child from sliding forward and improves seating posture. It can be used on the floor, in a chair, or as a stroller insert. Features include a 95-degree seat to back angle, double strap trunk support and belt, and fastening straps to secure the seat to any other chair and that store in the back pocket when
The Soft-Touch Sitter with Mobile Base is a floor sitter designed for use by children or adults who need positioning support. It has a soft contoured seat with an integral anti-thrust seating surface, contoured lateral and head supports, an adjustable 5-point positioning harness, and attachments straps The seat is made of seamless, latex-free, anti-microbial material that is peel- and tear-resistant, impermeable to fluids, and withstands cracking. The wood base is maple-faced plywood. The unit i
The Special Tomato Soft-Touch Sitter is a floor sitter designed for use by chiildren with phsyical disabilities. The sitter promotes proper head, neck, and trunk alignment, and can be attached to a standard chair with attachment straps, or to the optional tilt wedge or mobile tilt wedge. It is made from a soft, latex-free material that is impermeable to fluids. OPTIONS: Tilt wedge and mobile tilt wedge. SIZES: 1, 2, 3, 4, or 5. DIMENSIONS (HxLxW): 25 x 12 x 12 inches (Size 1), 29 x 14 x 14 inche
SPIFFY is a molded plastic floor sitter designed for use with children's seating systems up to 12 inches wide. A tilt-in-space feature adjusts from 0 to 25 degrees, and an ABS plastic tray attached to the unit provides a lapboard play surface. Manufacturer recommended for children up to 30 months of age, this unit also provides an alternate base to a stroller, wheelchair or highchair to allow the child to play and interact more readily with his/her peers at floor level. DIMENSIONS (HxLxW): 16
The Tumble Forms 2 Mobile Floor Sitter is designed to enable moving a properly positioned child with physical disabilities to another area or activity without having to reposition. The mobile base for the medium and large models are made of wood with the Tumble Forms covering and locking ball casters. The extra large mobile base is made of steel tubing with locking casters. The units come complete with a Feeder Seat (see separate entry) and Mobile Base, or the Mobile Base may be ordered separate
The Deluxe Square Module Seating System, models 2797 and 2795P, are floor sitters designed to support and position children with neurological disabilities. The complete seating system (2797) includes the seat and the following geometric positioning shapes: 2 long and 2 short rectangles, 2 triangles, 1 ring, and 1 disk. The positioning shapes only (minus the base seat) are available separately (2795P). The modules are vinyl covered foam with rounded edges. The child sits in the chair with his/her
Tumble Forms Floor Sitters feature integral abductor, hip positioning strap and quick release H-belt. The exclusive Tumble Forms coating makes them easy to wash and maintain. Tumble Forms seamless covering is washable, odor and stain resistant, impervious to urine, and nontoxic. The Feeder Seat's contoured interior has a 90 degree seat-to-back relationship to encourage correct seating posture. Shoulder harness slots allow 4 inches of vertical adjustment of the shoulder straps.