Severe Physical Disabilities

Results: 2547

Relax

Relax is an accessible infrared (IR) learning remote that comes updated and is designed to provide simplified control of almost any IR device. With a light touch or with the use of one switch, an individual can control up to eight functions on the preferred IR device. It is designed for people with physical and motor disabilities. It can also be used by people with learning and cognitive disabilities. 

"t"tube-Plate Weldment (Models 1521, 1521-01, 1522, & 1522-01)

The "T" Tube-Plate Assembly Weldment is headrest accessory interface hardware designed for positioning an Occipital Angle Bar or an Occipital "T" Bar on a wheelchair. The "T" Tube-Plate Weldment attaches to the rear of the occipital bar and slides through the 90-degree Vertical Tube attached to the back of the wheelchair. DIMENSIONS: Available in 4- or 6-inch lengths. COLOR: Available in black and stainless steel.

1-Switch Single Appliance Continuous Control Unit (Model 1490)

The 1-Switch Single-Appliance Continuous Control Unit, model 1490, is a switch control interface unit designed for use by individuals with upper exremity or severe physical disabilities. This remote control unit operates most AC appliances from a distance of up to 20 feet when the appliances are plugged into a receiver. A capability switch (not included) is used to activate the remote transmitter through either latch or momentary activation. With latch activation, the appliance runs until the us

10 Inch Slide Mounting Kit (Models 3624 & 3624-01)

The 10 Inch Slide Mounting Kit is is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair. The Kit consists of a Slide Bracket; a 10-inch, 90-degree Tube Slide; and two 3-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

10-Inch Scooter Bag (Model 70300)

The 10-inch Scooter Bag, model 70300, is a carrying bag for three-wheel scooters designed to hang from the handlebars on the tiller. This bag features a spring action hex frame opening to allow easy access to all items in the pouch. Opening the caddy requires placing the fingers in the middle of the frame and popping it open; closing the frame is achieved by pushing on the outside of the frame. Very little manual dexterity or strength is required to operate the opening. The bag is made of coated

13-Inch Armrest Bag (Model 70320)

The 13-inch Armrest Bag, model 70320, is a wheelchair side pouch designed for use on three-wheeled scooters. The caddy attaches to the arms using side release clips. This lined bag is made of coated nylon Cordura and features a spring-action hex frame opening. Opening the frame requires placing the fingers in the middle of the frame and popping it outward; closing the frame is achieved by simply pushing on the outside of the frame. Very little manual dexterity and strength are needed to operate.

13-Inch Sling Bag

The 13-inch Sling Bag, model 70040, is an underseat pocket designed to provide easy access and an unobstructed view of any items stored in this carrying bag to manual wheelchair users. The caddy is large enough to hold many daily needed items such as medicines, personals, writing instruments, paper, etc. The bag comes standard with a main compartment, pen and pencil pouch, and a small front pouch. The bag features a spring-action, hex frame opening which can be opened by placing the fingers in t

2 Wheelchairs Accessible 4-Seater Picnic Table

This product is designed for persons in wheelchairs. It is a 4-seater picnic table. Has room for 2 wheelchairs to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs.

24/7 Medical Alert

The 24/7 Medical Alert is an emergency alert system with monitoring service designed for use by seniors or individuals with balance or mobility disabilities or who are at risk for medical emergencies. The system includes a bedside console that calls a professionally monitored central station when activated by a wireless pendant transmitter. The small, waterproof transmitter can be worn in the shower, and covers a radius of 150 to 200 feet, depending on the construction of the home. The console c

2Gb Blank Cartridge For Nls/bard And Library Of Congress New Digital Talking Book Players

The 2GB Blank Cartridge for NLS/BARD and Library of Congress New Digital Talking Book Players is a digital talking book cartridge designed for use by individuals who are blind or have low vision or physical disabilities that prevent holding a book. This cartridge is the new format for digital audio materials from the National Library Service for the Blind and Physically Handicapped (NLS) of the Library of Congress, and is used by eligible borrowers to download digital talking books and magazines

4 Mini Button

The 4 Mini Button is pneumatic switch pad designed for use by individuals who use wheelchairs. This unit accommodates four switches (switches not included)to control power wheelchair chair seat functions and drive controls.

4-Plate Switch (Model Cm-15)

4-Plate Switch is a set of four switches housed side-by-side. Each switch is activated by pressing down on its rectangular plastic plate. An audible click accompanies switch activation. DIMENSIONS: 2.5 x 4.3 x 1 inches. WEIGHT: 4 ounces.

4-Pneumatic Switch (Model Cm-17)

4-Pneumatic Switch is a switching unit that accepts input from one sip- and-puff tube. Different combinations of light and heavy sip and puff serve to activate each of four switches. Any desired tube may be used; one is available as well from the manufacturer (extra). Switch activation is silent. DIMENSIONS: 2.5 x 4.75 x 1.75 inches. WEIGHT: 7 ounces.

4-Pushbutton Switch (Model Cm-16)

4-Pushbutton Switch is a set of four snap-action button switches housed side-by-side, each in a 0.5" diameter recess. Pressing each button activates one switch. An audible click accompanies switch activation. DIMENSIONS: 2.5 x 4.3 x 1 inches. WEIGHT: 4 ounces.

4-Switch Joystick (Model Cm-19)

The 4-Switch Joystick, model CM-19, is a joystick lever that may be moved in any of four directions. Moving it in a particular direction will activate one switch. This joystick is also available with an additional pushbutton switch. DIMENSIONS: 2 x 4.3 x 1 inches. WEIGHT: 6 ounces.

5 Position Bariatric Expanda-Bed

The 5 Position Bariatric Expanda-Bed is a motorized bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features head and foot elevation, Trendelenberg position, seat up and down, and adjustable bed height. It has single button controls for cardiac chair position, return to supine, and Trendelenberg operation. Trendelenberg operation may be used without having the bed either fully up or fully down. The bed has Steer-Lock casters, and

5-Pushbutton Switch (Model Cm-18)

The 5-Pushbutton Switch, model CM-18, is a set of four snap-action button switches housed side-by-side, each in a 0.5" diameter recess, with an additional raised pushbutton on the same housing. All switches are activated by being pressed. An audible click accompanies switch activation. DIMENSIONS: 2.5 x 4.3 x 1 inches. WEIGHT: 4 ounces.

5-Tread Switch Slot Control (Model Cm-50)

5-Tread Switch Slot Control is a set of five Tread Switches (see Tread Switch, Zygo Industries, Inc.) mounted in an arc array, with dividers between them. The user activates the switches by moving the arm (or other activator) into the appropriate slot and pressing down on the switch. Activation produces a click. DIMENSIONS: 19 x 6 x 3 inches. WEIGHT: 4.5 pounds.

6-Seater Picnic Table- Fits 1 Wheelchair

This product is designed for people who use wheelchairs. It is a 6-seater picnic table and has room for a wheelchair to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs. Shipping cost included.

6-Seater Picnic Table- Fits 2 Wheelchairs

This product is designed for people who use wheelchairs. It is a 6-seater picnic table and has room for 2 wheelchairs to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs.

7 Inch Slide Mounting Kit Models 3621 & 3621-01)

The 7-Inch Slide Mounting Kit is is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair. The Kit consists of a Slide Bracket; a 7-inch, 90-degree Tube Slide; and two 3-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

8-Inch Beverage Bag (Model 70020)

The 8-inch Beverage Bag, model 70020, is a caddy for attachment to wheelchairs designed to accommodate liquid containers, school or art supplies, and other items. The lined bag will holds 1 or 2 cans of soda or other drinks, sports bottles, and coffee mugs. Made of coated nylon, the caddy affixes to the wheelchair tubing with a 3-inch piece of adhesive Velcro strapping (included). The bag features a spring-action hex frame opening which can be opened by simply placing the fingers in the middle o

9-Inch Security Pouch (Model 70000)

The 9-inch Security Pouch, model 70000, is a wheelchair side pouch designed to be attached under the armrest to prevent theft of valuables and money. The flap-style pouch is secured with heavy webbing, and made of 400 Denier coated nylon packcloth. This lined carrying bag will accommodate a calculator, writing utensils, change purses or small wallets, etc. DIMENSIONS (WxH): 10 x 6 inches. COLOR: Royal blue, magenta, teal, grey, black, and burgundy.

90 Degree Whisper-Lite Swingaway Sip-N-Puff (Model 32555)

The 90 Degree Swingaway Sip-N-Puff System, model 32555, is a pneumatic switch designed to enable people with severe physical disabilities to propel powered wheelchairs using breath control. The system can be placed in a fixed position or installed as a swingaway unit by using the Pinned Split Collar with the Notched Step Collar. A plastic-coated gooseneck tube swings to the side and out of the user's way for better access when entering or exiting the chair. The system features a swing-away block

90-Degree Tube Plate Weldment (Models 1511, 1511-01, 1512, 1512-01, 1513, & 1513-01)

The 90-Degree Tube Plate Weldment is headrest accessory interface hardware designed for positioning the wheelchair headrest. The 90-Degree Tube Plate Weldment attaches to the recessed area of the Headrest and slides through the 90-degree Vertical Tube attached to the back of the wheelchair. OPTIONS: A custom made 90-Degree Tube Plate Weldment is available. DIMENSIONS: Available in 4-, 6-, or 10-inch lengths. COLORS: Both the original and the custom made options are available in black and stainl

Abasoft Talking Desktop Software

Abasoft Desktop Software is a voice input and voice output program designed for use by individuals with spinal cord injury, upper extremity, severe physical, mobility or vision disabilities. This talking and listening software offers speech recognition, dictation and a natural text-to-speech voice. The program talks back to the user at every opportunity in addition to displaying text. Features include voice commands for hands-free computer operation, including MP3 music, weather maps, dictation

Abc Train (Model 5129)

The ABC Train, model 5129, is a switch operated toy designed for use by children with upper extremity, severe physical or fine motor disabilities. Designed to help children learn letters, numbers, first words, and greetings, this colorful toy train has been adapted with two switch jacks that allow for five different activations. Once a switch (not included) is activated, children can listen to 30 songs, tunes and phrases along with sounds and lights. Other features include an on/off switch and v

Abduction Contoured Pads (Models 1350, 1351-01, -21, -31,-32, -33, 1360, 1361-01, -21, -31, -32, -33, 1370, 1371-01, -21, -31, -32, & -33)

The Abduction Contoured Pad is an abductor designed to support the legs of an individual with spinal cord injury or severe physical or neurological disabilities in abduction while seated in a wheelchair. Curved to body contours, it can adapt to many positioning applications. The Abduction Contoured Pad is made of 16 gauge steel, zinc plated, and formed with recesses for ##10-32 press nuts to attach it to the interface hardware. These pads are padded and available covered with a variety of uphols

Abduction Wedge Pad (Models 1443-01, -21, -31,-32, -33, 1444-01, -21, -31, -32, -33)

The Abduction Wedge Pad is an abductor designed to support the legs of an individual with spinal cord injury or neurological or severe physical disabilities in abduction while seated in a wheelchair. The Abducion Wedge Pad is constructed of plywood and foam with tee nuts, and is available d with a variety of covers. OPTIONS: Stationary or swingaway mounting. Covers are available in terry, Lycra, and heavy-weight nylon. SIZES: Available in small and large. DIMENSIONS: The small wedge is 4.5 inch

Abductor Flip Down Kit (Model 31467)

The Abductor Flip Down Kit, model 31467, is seating hardware general designed to allow abductors and lateral pads to swing away during wheelchair transfers. Designed to be used with the manufacturer's Abductor Pads or Lateral Pads (see separate entries), this kit includes one four-inch coated steel tapered L-bracket, one 2.75-inch coated steel slotted L-bracket, one 2.75-inch coated steel extrender, one anodized aluminum hinge, and mounting hardware. COLOR: Black.

Abductor Pads (Models 31429, 31430, 31431, 31466S, 31466M, & 31466L)

The Abductor Pads are designed to aid in positioning people who use wheelchairs. Made of textured urethane self-skinning foam, these pads come with 10-32 T-nuts embedded in all mounting holes. Models 31429, 31430, and 31431 have one-inch on center mounting holes and the 31466 series have 1.5-inch on center mounting holes. SIZES: Both styles come in small, medium, and large. DIMENSIONS: All pads are three inches tall. The small models are 3 inches wide in the front and 3.5 inches wide in the back

Ability Switch Tester (Model 65955)

Ability Switch Tester, model 65955, is control switch assessment system designed for use with individuals who use control switches to operate devices. This unit provides visual and auditory indications when a switch is activated. The switch is plugged into the tester, and switch closure is indicated by a light and a tone. The auditory feedback can be switched off. This device is equipped with jacks for single, dual, and multiple switches. POWER: Uses one 9-volt battery. DIMENSIONS: 6 x 3.5 x 1.5

Able Table

The Able Table is a height-adjustable tilt-top work table and overhead bookholder designed for use by individuals who use wheelchairs or eith severe physical disabilities or spinal cord injury. This unit lifts books for eye-level or overhead reading within a range of 9 to 18 inches high. Springs provide the lifting power. The unit is designed so that the book will stay where placed: up or down, left or right, at any angle without adjustment of knobs or levers. A single knob locks the top in plac

Ablenet's Action Dictionary

AbleNet’s Action Dictionary is a reference guide to alternative solutions that support student actions when adaptations are required for communicating, moving, learning and/or generally engaging in the classroom. The solutions and recommendations found in the Action Dictionary are designed for students with cognitive and physical challenges yet other students may benefit from these adaptations as well. How It Is Organized Action words like SPEAK, LOOK, CHOOSE are key to both engaging and gaugin

Ableware Ablerise Bed Rail

ABLEWARE AbleRise Bed Rails are side rails designed to provide support for individuals with mobility disabilities as they enter and exit the bed. Available in a single model and a double model, the base of these rails installs between the mattress and the box springs. The rails are height adjustable and feature storage pockets. DIMENSIONS: The rails are 20 inches wide. The space between the handles on the double model adjusts from 7 to 17 inches. The unit extends 39.25 inches under the mattress

Ableware Rolling Shower Chaise

The Ableware Rolling Shower Chaise is a caster shower chair designed for use with children with mobility disabilities. FRAME: Aluminum frame with an extended front bumper bar to protect the child's feet. SEAT: A molded seat in lavender or turquoise. The seat has adjustable safety straps, a four-position, height-adjustable headrest, a holder for a hand-held shower, and a soap holder. CASTERS: Four black casters. The two rear casters include foot-operated brakes.

Abracadabra Dress

The Abracadabra Dress is a women’s dress designed for wear by senior women or those with upper extremity disabilities or who have difficulty dressing. Made of poly-cotton fabric, this adaptive dress features back closure, a double yoke with three snaps, and a full bodice with two Velcro back closures. Other features include two patch pockets on the front and a lace-edged collar sewn on a V-neckline. The dress is available with short- or three-quarter-length sleeves and in knee length for full co

Abracadabra Gown

The Abracadabra Gown is a women’s nightgown designed for use by women with upper extremity or fine motor disabilities. Made of polyester and cotton blend fabric, this knee-length gown features a double yoke for added warmth to shoulders, three snaps positioned off-center to avoid spinal pressure points, and a full bodice with two Velcro back closures. The gown is machine washable. OPTIONS: Available with a pocket for heart monitor or slit by request. SIZES: Small, medium, large, and extra large.

Accella Treatment Table (Model 6030)

The Accella Treatment Table, model 6030 is a treatment table designed for use with children in therapy settings. The height-adjustable table features a permanently attached treatment mat of bacteria-resistant reinforced vinyl covering over padded high-density polyurethane foam, and height adjustment using a built-in hand crank. The lower heights facilitate transfers, while the higher levels accommodate treatment. DIMENSIONS: The table has a height adjustment range of 24 to 36 inches and a surfac

Accent 1200

The Accent 1200 is a handheld direct selection and scanning communicator designed for use by individuals with communication, speech, neurological, or severe physical disabilities or spinal cord injury. It has an 11.6-inch liquid crystal display (LCD) thin film transistor (TFT) HD touchscreen display. In addition to the touchscreen, the user can interface with the Accent 1200 using mini keyboard and mouse (included), or single- or dual-switch scanning. The product comes pre-loaded with Acapela, F

Access Dinghy 2.3 Wide Seater

The Access Dinghy 2.3 Wide Seater is an accessible sailboat designed for use by individuals with severe physical disabilities or spinal cord injury. It can be sailed by one or two sailors. Narrow side decks require a solo sailor to swivel his or her upper body weight to windward to keep the boat dry in breezy conditions. The boat has a wide hammock seat for two children, two small to medium sized adults, or one adult and a child. It comes with manual joystick steering. To prevent capsizing and p

Access Ramp

The Access Ramp is a swimming pool ramp designed for use by individuals with mobility, severe physical, or lower extremity disabilities or spinal cord injury. Custom fabricated for each pool, this ramp has a structural fiberglass T-Bar slip-resistant surface and wheels for portability. Mounting hardware is included. DIMENSIONS (LxW): 15 feet x 36 inches. CAPACITY: 400 pounds.

Accessible Kitchen Counter

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who use a wheelchair to get under and use a counter. A molded laminate countertop can be supported by installing upright shelf tracks on the kitchen wall and adding deep shelf brackets. Wheelchairs fit underneath and the counter is thin enough to be useful. TITLE: The Accessible Kitchen Counter. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/counter.htm. REF: The originator, Bruce Barney, can be contacted at efn

Accesstair (Models Vmh36, Vmh42, & Vmh48)

AccesStair VMH is a platform wheelchair lift designed for use by individuals who use wheelchairs. This lift is a set of stairs with railings that, at a push of a button, converts into a vertical platform wheelchair lift. The steps slide back into the unit, similarly to a stadium bleacher system and the powder-coated steel handrails move vertically with the platform. The stairs are securely held in extended position for safe use as a stairway and retract into a stowage area under landing when the

Accupoint

AccuPoint is a mouse emulator and computer cursor control interface designed for use by individuals with fine motor control or upper extremity disabilities or amputation, cerebral palsy, or spinal cord injury. While distinguishing tremors from intentional movements, this movement tracking system enables the user to control the mouse and type letters with movements ranging from very small to very large. The unit mounts on the back of the user's computer display and plugs into the computer with a

Achievement Deep V Positioner

The Achievement Deep V Positioner is a side lying positioner designed for use by children and adults with mobility or severe physical disabilities. This unit enables users to maintain a comfortable side lying position without restraining straps. This V-shaped sidelyer is constructed of a high density, flame-retardant foam with a flame resistant vinyl cover. SIZES: Small, medium, and large. DIMENSIONS (WxLxD): The small positioner is 12 x 48 x 11 inches. The medium positioner is 22 x 60 x 11 inch

Achievement Deluxe Sidelyer

The Achievement Deluxe Sidelyer is a side lying positioner designed for use with children with neurological and physicdal disabilities. Designed to ease positioning for children, this unit enables children to lie on their left or right side in a secure, comfortable position. This positioner includes two padded safety belts that adjust for the girth and the height of the child. Made of high density flame retardant foam, this side lyer is covered with 21-ounce, flame-retardant vinyl and secured to

Achievement Modified Incline Ramps

The Achievement Modified Incline Ramps are positioning wedges designed for use with children or adults with mobility, severe physical, or neurological disabilities or spinal cord injuries. These wedges are intended to provide gentle support when positioning an individual in a supine or prone position. Constructed of firm, comfortable, fire-resistant foam, these wedges are covered in extra heavy- duty anti-bacterial fire-retardant vinyl. Velcro-backed safety straps are included. These wedges can

Achievement Positioning System

The Achievement Positioning System is a positioning wedge system designed to provide firm, comfortable positioning for children and adolescents with neurological or severe physical disabilities. This system can be used in a variety of configurations including prone, supine and sidelying positioning. Unit assembles as a cube for easy storage and has Velcro tabs for connecting the pieces. The wedges are made of fire-retardant dense foam and easy to clean vinyl. SIZES: The set includes two small we

Achievement Wedges

The Achievement Wedges are child positioning wedges designed for use with children with mobility, neurological, or lower extremity disabilities. Intended to provide therapeutic positioning and exercise for children, these colorful durable wedges are made of high- compression foam and covered in heavy-duty fire- retardant anti-bacterial vinyl. DIMENSIONS (HxWxL): 4 x 20 x 22 inches, 4 x 30 x 22 inches, 6 x 14 x 26 inches, 6 x 20 x 22 inches, 6 x 24 x 28 inches, 8 x 20 x 22 inches, 8 x 24 x 28 inc

Active Life Station

The Active Life Station is an accessible table designed for use with children and adults with severe cognitive, emotional, or physical disabilities who require constant supervision. This table system surrounds the user on all sides, with one side being a secure access door. The individual's wheelchair or feeder seat is positioned on a 360-degree rotating base in the center, enabling the user to access table surfaces on all sides. The station can be used for watching television, using a computer,

Active Wheelchair Platform Rocker

The Active Wheelchair Platform Rocker is a rocking attachment for a wheelchair designed for use by individuals with mobility or neurological disabilities, Alzheimer's disease, or spinal cord injury. This unit is designed to enable an individual to experience the benefits of rocking without transfering from a wheelchair. The rocker features an entry/exit rear ramp, adjustable front caster stops to center the wheelchair on the platform, and two safety wheelchair tie-down straps. The Active Platfo

Ada 100 Area Of Rescue Call System

The ADA 100 Area of Rescue Call System is an intercom based call signal system that is designed to be vandal-proof and in compliance with the Americans with Disability Act requirements. The system consists of multiple Master stations that are either wall- or desk- mounted, and up to 60 of individual area stations, installed flush in the wall or surface mounted, in Areas of Rescue Assistance. This 2-way communication system presents both locations with visual as well as audible signals, and allow

Ada Compliant Wheelchair Accessible Desk (Model 876)

The ADA Compliant Wheelchair Accessible Desk, model 876, is a height adjustable classroom desk designed for use by children who use wheelchairs. This table has a polyester powdercoated frame, nickel-chrome plated legs, and either a fiberesin-laminate or plastic desktop. The telescoping legs are adustable by sliding the lower leg inserts into the upper legs and tightening a set screw. The lower leg inserts have adjustable nylon glides and optional locking wheels. DIMENSIONS (LxW): The table top i

Ada Height Adjustable Podium (Model 70)

The ADA 70 Podium is a height-adjustable podium or lecterndesigned for use by individuals of any height or who use wheelchairs. The option of purchasing shelves and drawers is available so that audiovisual equipment can be integrated into the Podium. This podium features a fixed lectern shelf, power and cable management subsystems, external electrical outlets, a master power switch, and an input/output box. DIMENSIONS (WxDxH): 58.25 x 30.5 x 35.75 to 50.5 inches. COLOR: Mahogany woodgrain is sta

Ada Series Classic Design

ADA Series Classic Design is a kitchen with accessible components designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury,short stature, or other physical disabilities. This compact adjustable kitchen system includes an under-counter refrigerator, cooktop, oordinated finishes, and storage space for dry goods and cooking supplies. The Adaptable Sink Base easily converts to meet Americans with Disabilities Act specifications and the folding design stores c

Adalap

The ADALAP is a lap desk designed for use by individuals who use wheelchairs. The basic unit includes the base and pole with a top plate with a Velcro loop. Made from lightweight anodized aluminum alloy with stainless steel fasteners, the unit has a base that slides right under the wheelchair seat cushion. Height adjustment is accomplished with a quick-release clamp.OPTIONS: Fresh or salt water fishing rod holder; Snap Lap Desk; Lap Shopper shopping basket; lap tray; accessory mount for camera,

Adapt-A-Grip System

The Adapt-A-Grip System is a grasping aid for the hand designed for use by individuals with spinal cord injury or grasping disabilities. This system enables individuals with limited or no hand function to independently use and switch between such items as eating utensils, brushes, cups, electric razors, toothbrushes, phones, and others. Objects are attached to adaptors with zip ties or Velcro straps (both included). Once objects are attached, they can be loaded into the accessory holder which se

Adapt-A-Lap

The Adapt-A-Lap is an angle- and height-adjustable book holder designed for use by individuals with mobility and upper extremity disabilities. This lightweight plastic easel features two moveable straps to hold the reading material in place and a see through filament to hold the pages open. An extendible leg and a base with concave and convex curves provides stability and the easel can rest on the user's upper chest to bring the material closer to those with low vision. This device adapts to a

Adapt-A-Tray

The Adapt-A-Tray is a laptray designed to provide upper body positioning for people with spinal cord injury or neurological or severe physical disabilities who use wheelchairs. The system incorporates a tray with a hole-punched surface to enable attachment of brackets and padded blocks to aid in positioning of the upper extremities, equipment, communication aids, or activities. The starter kit includes one tray with holes, one overlay to create a smooth tray surface, four 45-degreec attachment b

Adapta Van

The Adapta Van is a van conversion designed for commercial business and organizations that provide transport for individuals who use wheelchairs. Conversions can be done for Chevy, GMC, and Ford vans. Features include an aerodynamic fiberglass top, raised cargo doors, solid core marine grade plywood with lap jointed seams covered with non-slip diamond patterned vinyl, and a four-point wheelchair securement system with recessed aluminum L-track. Conversions can accommodate a variety of interior t

Adaptations For Independent Use Of Cassette Tape Recorder/radio By High-Level Quadriplegic Patients.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Mouthsticks and adapted holder for cassettes to allow a C-3 to C-5 quadriplegic to operate a tape recorder/radio in order to listen to music independently. This adaptation needs two mouthsticks made of metal, plastic or wood: one about 50 cm long with a friction tip (i.e., a dowel and and a pencil eraser), and one that separates into two 9 cm "fingers" with 1 cm projections to fit into the holes in the cassette; a cassette holder tilted at a 70-degree

Adapted Battery-Powered Tricycle

CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities, including cerebral palsy and lung disease, with a means of independent mobility. In consultation with the child’s therapists, a battery-powered Wind Rider tricycle was purchased and custom-modified to the child’s needs. First the existing foot switch was replaced with a hand switch. A control was also added that enables family members to regulate the maximum speed of the bike and limit the rate of acceleration. The socket

Adapted Child Jacket

DO-IT-YOURSELF ENTRY --- PURPOSE: To create a customized jacket for a child with severe disabilities.This particular child gets hot very easily, which can bring on seizures so getting a jacket on and off easily is essential. This custom adaptation takes a regular child’s jacket and opens it up the back. This adaptation is ideal for non-hooded jackets but can be used with hooded jackets as well. First lay the jacket flat and cut a slit up the back from the bottom all the way to the top. Sew a sea

Adapted Classroom Chair

CUSTOM ADAPTATION PURPOSE: To enable a child with neurological disabilities to participate in the classroom. This chair began with the standard classroom chair. Side supports were created from metal plates and fixed to a bracket underneath the seat. Covered rectangular foam wedges were later fitted inside the supports to hold the child in position and prevent the child's knees from splaying outward. Glides were also placed on the legs of the chair to make it easier to move on carpeted floors. T

Adapted Dvd Player (Model 1578)

The Adapted DVD Player, model 1578, is designed for use by children and adults with fine motor, severe physical, neurological, or upper extremity disabilities or spinal cord injury. This CD and DVD player has been adapted so the user has only to select the pause and play functions to control DVD s and CDs. A connected capability switch (not included) is used to select each function; however, the player can be used with or without a capability switch. Features include widescreen color LCD displa

Adapted Hi Ho Cherry O (Model 941)

The Adapted Hi Ho Cherry O, model 941, is a counting board game designed for use by children with fine motor or upper extremity disabilities. This classic counting has an adapted game board and spinner for accessibility. The game board is equipped with two switch plates. The red switch is for picking the cherries off the tree and the blue switch is for putting them back on when a player lands on the bird, dog or spilled bucket. The game board also has two external jacks for external capability s

Adapted Hungry Hippo

Adapted Hungry Hippo, model 737, is a board game designed for use by children with upper extremity or severe physical disabilities. This adapted game has two paddles attached to the Hippos for easy activation. Simply hit the paddles and watch as the Hippos race to gobble up as many marbles as possible. This board game helps increase eye-hand coordination and hand strengthening. DIMENSIONS (HxLxW): 6.5 x 25 x 16.5 inches. WEIGHT: 3.25 pounds.

Adapted School Desk

CUSTOM ADAPTATION PURPOSE: To enable a child with neurological disabilities to participate in the classroom. This adaptation was based on a standard student desk with a torso cutout. The existing cutout was enlarged and the existing desk was sanded and revarnished. TITLE: School Desk and Chair. JOURNAL: TAD Journal. REF: Vol. 21 no. 3, Spring 2001: p.16. PAGES (including cover): 2 2001.

Adapted Sony Cd Walkman (Model 331)

The Adapted Sony CD Walkman, model 331, is a portable adapted compact disc player designed for use by children and adults with severe physical, neurological, or upper extremity disabilities or spinal cord injury. Pushing a connected switch (not included) causes the CD to play; pushing the switch again causes the CD to stop. This player includes ear clip headphones. POWER: Uses two AA batteries (not included). DIMENSIONS: 5 inches in diameter. WEIGHT: 0.75 pounds.

Adapted Squirrel Stander

CUSTOM ADAPTATION PURPOSE: To enable a child with cerebral palsy and a chronic lung disease to stand. This stander has a plywood base and radiata pine uprights and a fabric back. The base is adjustable so the frame tilts up to 10 degrees backward. The standard is equipped with a wooden tay with a small lip and Velcro strips in the center to hold toys in place. The tray can be attached as needed at any height using Cowdrey shelf brackets. The fabric back is made of Brezeway, fabric used for outd

Adapting Puzzles

“DO IT YOURSELF” ENTRY ----- PURPOSE: To provide several do-it-yorself options for adapting puzzles for children with grasping and fine motor skill disabilities. First, cut notches into the side of the puzzles pieces to make them easier to grasp. A second method reqires adding handles of some kind to the puzzle pieces (i.e. a knob, empty thread spool, or section of dowel rod). If the puzzle came with knobs, but they are too small, replace them with larger knobs. Third, if the child cannot grasp

Adaptivation Flexible Switch Set

The Adaptivation Flexible Switch is a bendable, pressure-activated switch designed to help people with limited mobility. Flexible Switches are adhesive-backed, pressure activated switches. These switches are flexible which allows them to be attached to various objects and surfaces, essentially turning those objects into the switch itself. It activates at the slightest touch whether it comes from above of a shallow angle and only requires less than two ounces of pressure. The Flexible Switch is a

Adaptive Anti-Tipping Chair

The Adaptive Anti-Tipping Chair is a positioning chair designed for use by children or adolescents up to 48 inches tall with neurological or physical disabilities. The chair adjusts for leg length, seat depth, and back height. It is constructed of chrome plated steel and upholstered foam, mounted on stabilizing skis to prevent tipping. A seat belt is also included. OPTIONS: Clear acrylic tray, lateral supports, pelvic supports, removable knee abductor, and foot bracket. SIZES: Child or adolescen

Adaptive Baby Crib

This Adaptive Baby Crib is intended for parents with a physical disability. Is designed and made at home and intended to be adapted according to the needs of the parent. 

Adaptive Fixtures Kit (Model Af-10-K)

The Adaptive Fixtures Kit is a switch mounting hardware kit designed for use as a replacement program or as an eveluation tool for properly mounting switches. The Kit is comprised of multi-purpose pieces and parts that can be used as "on the spot" replacement and sent on with the user. You can then reorder the parts as necessary to replace what has been used. The Kit can also be used as an evaluation tool where the parts never leave the Kit. Mountings can be experimented with to find a particula

Adaptive Full Length Side -Zipper Pants

The Adaptive Full Length Side-Zipper Pants are child's pants or men's trousers designed for use by individuals with mobility disabilities or incontinence or those who are in bed for long periods. These pants feature full-length separating zippers on each outer leg. The zipper is positioned to be zipped from bottom to top. The waistband is fully elastic. SIZES: Small (fits ages 6 to 8 years), medium (fits ages 10 to 12 years), large (ages 14 to 16 years), and extra large (fits ages 16 to 18 year

Add-On Tray, The

DO IT YOURSELF ENTRY --- PURPOSE: To keep crayons, drinks, and other items within reach of a wheelchair user. The add on tray shown was custom built of 3/8-ply to slide over the standard wheelchair tray. Multiple compartments allow her to keep crayon colors and other small items organized and hold drinks. TITLE: The Add-On Tray. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/ad_on_tray.htm. REF: The originator, Tom Jeary, can be contacted at tlj@golden.net.

Adductor Pad Kit - As4000 & As5000 (Models 4380-31, -32, -33, 4382-31, -32, & -33)

The Adductor Pad Kit is an adductor designed to position the legs of an individual with spinal cord injury or severe physical disabilities seated in a wheelchair. The pads are designed with internal threads for mounting to support brackets which attach to seat bottom. They are adjustable from front to back, in and out, and up and down. The pad is constructed of steel padded with 1.25 inch closed cell foam and covered with a Rubatex slip cover. A kit contains a pad and all the hardware necessary

Adjectives And Opposites: Learning At The Circus

Adjectives and Opposites: Learning at the Circus is a tutorial program designed to introduce and reinforce the concept of adjectives and opposites for children with language-learning, developmental, severe physical or cognitive disabilities, or autism. This program strengthens vocabulary, teaches adjectives and opposites, and reinforces basic concepts. Before the program begins, the instructor selects an activity and interface and decides whether to use the game for encouragement and reinforceme

Adjustable Bath And Shower Seat

The Adjustable Bath and Shower Seat is a bath seat designed for use by individuals with mobility and balance disabilities. Available with or without a back, the seat can be used in most bathtubs and shower stalls. The unit's seat and the back are plastic with easy-to-grip handles and molded-in areas for hand-held shower spray storage. The aluminum legs are flared to help prevent tipping and have slip-resistant rubber tips. DIMENSIONS (HxDxW): 15.5 x 16.5 x 18 inches without back; 18 x 16.5 x

Adjustable Bath Benches (Models 9010 & 9020)

The Adjustable Bath Benches are bath seats designed for use by individuals with mobility, balance, or cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a molded back, the bench has a plastic seat and back with multiple drainage holes and is equipped with non-skid rubber tips. DIMENSIONS (HxDxW): Seat adjusts from 14 to 20 inches high x 11x 19 inches. CAPACITY: Weight capacity is 300 pounds.

Adjustable Bath Chair (Models B0732, B0740 & B0848)

The Adjustable Bath Chair, models B0732, B0740, and B0848, is a reclining bath seat designed to provide children with lower extremity, mobility or severe physical disabilities with a stable, comfortable seat while bathing. This chair has a frame constructed of PVC tubing and a mesh seat. The top and bottom rails of the frame are padded. The angles of back and leg rests of this bath chair are adjustable, and the chair includes chest and leg safety straps. The mesh is removable for cleaning. OPTIO

Adjustable Bed Rails

The Adjustable Bed Rails are side rails designed to keep individuals with physical disabilities from falling out of bed or individuals with cognitive disabilities from leaving bed without assistance. The rails can also aid the individual in turning in bed. Available singly or in pairs, the rails have three steel tube bars and the base fits between the mattress and box spring or bed frame. The units disassemble to lie flat for transport or storage. DIMENSIONS: The tube rails are one inch in diame

Adjustable Book Rest.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Book rest which adjusts to hold the book at many angles. Book rest made of wood, with wing nuts and bolts to provide adjustability. Provides shopping list of materials needed, instructions and diagram. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Elderly People REF: London, England: Souvenir Press: p 88-89. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC CALL NUMBER: R3460 PAGES (including cover): 3 1985.

Adjustable Brackets (Models As4000 &as5000)

Adjustable Brackets are multi-hole brackets used in conjunction with seat hooks to enable a variety of seat positioning in wheelchairs. They are made of 11 gauge stainless steel with a 35 degree angle and available with 2, 3 4, 6, or 8 holes. Also available is an 8 hole, 2 inch extra long model. COLOR: Black.

Adjustable Chair And Table

CUSTOM ADAPTATION PURPOSE: To enable a small child with neurological disabilities to have a stable play area. Made of white pine plywood and coated in clear polyurethane, the table is height adjustable and has a torso cutout, enabling the child to move closer to the table and support himself/herself with his/her elbows while performing tasks with the hands. The chair is also made of white pine plywood coated with clear polyurethane and features a backrest, seat to floor height adjustability, an

Adjustable Composite Bath & Shower Seat

The Adjustable Composite Bath and Shower Seat is a shower chair/bath seat designed for use by individuals with mobility and balance disabilities. This seat has large, easy-to-grip handles and molded-in storage areas for a hand-held shower spray. The seat is designed for individuals requiring a larger seating area and has S- shaped drainage holes to eliminate graywater pooling. DIMENSIONS (HxDxW): 18.5 x 20 x 25.5 inches. The height adjusts from 18.5 to 23.5 inches in unlimited increments. CAPAC

Adjustable Head Pointer (Model 6001)

The Adjustable Head Pointer, model 6001 is a headwand designed for use by individuals with cerebral palsy, spinal cord injury (SCI), brain injury, or upper extremity disabilities. The Adjustable Head Pointer is an aluminum pointer that projects from above the forehead. Size and shape of the frame, as well as the length and angle of the pointing rod are adjustable. The elastic head band and chin strap attach with hook-and-loop material.

Adjustable Head Support

The Adjustable Head Support is a padded head positioner with support legs designed to enable the head to be supported in prone, supine, or seated positions. The angle of support can be adjusted by altering the support legs. It may be useful for diagnostic testing, therapeutic massage, and cranial compression. OPTIONS: Extension legs are available. DIMENSIONS: Extension legs are five inches long.

Adjustable Headstick / Pointer (Model H71830)

The Adjustable Headstick/Pointer, model H71830, is a headwand designed to assist nonvocal individuals with communication. The device may also be used as an actuator for switches or controls. The device consists of plastic bands adjustable to the size of the user's head and reinforced with metal hardware, and topped with the aluminum pointer rod. The headband features padding at the forehead for comfort. The rod is length and angle adjustable in any direction and has a pencil holder at the tip. D

Adjustable J Hook Bracket Hardware Seating Package (Package 20Xx)

The Adjustable J Hook Bracket Hardware Seating Package, package 20XX, is seating hardware designed for use on a wheelchair. The Package includes a solid back insert including T-nuts; a solid seat insert including T-nuts; a wide, 1.5-inch offset seat to back hinge; a pair of 1- inch diameter tube two-hole J hooks; a pair of five-hole adjustable L brackets; a pair of 1-inch diameter tube six-hole J hooks; a pair of two-hole adjustable L brackets; a 1-inch diameter tube drop stop; and a 1-inch diam

Adjustable Kinder Chairs

The Adjustable Kinder Chairs are high and low positioning chairs designed for use by children ages one to seven years or up to 49 inches tall with mobility or physical disabilities. Features include a firm back and seat with adjustable seat depth and back angle. Other features includes a removable abductor pad, an adjustable footrest, and an abductor activity tray. The seat height adjusts to allow the child to work or play at a regular table. OPTIONS: Casters are available. DIMENSIONS (HxW): The

Adjustable Overbed Bedside Table

The Adjustable Overbed Bedside Table is designed for individuals who are confined to a bed for a substantial period of time. For instance, those persons with lower extremity disabilities and walking disabilities, or those who sustained a brain injury or individuals recovering from a stroke. Multipurpose table top. Can be used for eating, writing, working/watching movies on your laptop, reading, etc. Top tilts 45 degrees in either direction. Raised rim helps keep items from sliding off. On rollin

Adjustable Positioning Chair - Early Intervention (Model Apc100)

The Adjustable Positioning Chair – Early Intervention, model APC100, is a customized positioning seat for designed for use by children with mild, moderate, or severe physical disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. The seat is height adjustable within the chair to allow the upper extremities to be positioned comfortably at the cutout on the side frame. The seat is also angle adjustable to create a seat to back angle be

Adjustable Positioning Chair - Preschool / Primary (Model Apc200)

The Adjustable Positioning Chair – Preschool/Primary, model APC200, is a customized positioning seat for designed for use by children with mild, moderate, or severe physical disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. The seat is height adjustable within the chair to allow the upper extremities to be positioned comfortably at the cutout on the side frame. The seat is also angle adjustable to create a seat to back angle bet

Adjustable Positioning Chair - Primary / Intermediate (Model Apc300)

The Adjustable Positioning Chair – Primary/Intermediate, model APC300, is a customized positioning seat for designed for use by children with mild, moderate, or severe physical disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. The seat is height adjustable within the chair to allow the upper extremities to be positioned comfortably at the cutout on the side frame. The seat is also angle adjustable to create a seat to back angle

Adjustable Rails And Backrest For Toilet

CUSTOM ADAPTATION PURPOSE: To enable individuals with a variety of disabilities to use a toilet. The rails were made from discarded hospital bedheads and mounted to the existing metal wall clamps. The backrest was made from the pad of a telephone table and mounted to a piece of wood connected to two wooden clamps that fit over the rails. A T-nut on either side enables the backrest to slide backward and forward along the rails for adjustment to meet individual needs. A chest strap provides addit

Adjustable Shower Seat With Arms And Back

The Adjustable Shower Seat with Arms and Back is designed for use by individuals with balance and lower extremity disabilities. The shower seat has removable back and arms and features height-adjustable legs, suction feet, and a built-in hand held shower spray holder. DIMENSIONS: The width between the arms is 17.5 inches and the legs adjust from 16 inches to 21 inches in 1- inch increments. CAPACITY: 300 pounds.

Adjustable Split Solid Seat Insert (Model Ssp80Xx)

The Adjustable Split Solid Seat Insert, model SSP80XX, is a solid seat insert designed for use on wheelchairs. The solid seat insert includes HR foam, T-nuts, and an adjustable split seat, model MOD4900. DIMENSIONS: The foam is 1.5 inches thick.

Adjustable Touch Screen Mouth Stylus (Model 9089)

The Adjustable Touch Screen Mouth Stylus, model 9089, is a mouthstick for a tablet computer designed for use by individuals with grasping, fine motor, neurological, severe physical or upper extremity disabilities or spinal cord injury. This telescoping stylus is lightweight with a tip that requires minimal pressure. It has an adjustable stainless steel shaft and a plastic bite plate with rubber sleeves that allows the user to firmly and comfortably hold the stylus in his or her mouth. This mouth

Adjustable-Drop Hardware Kits (Models 32517 & 32518)

Adjustable-Drop Hardware Kits are seating hardware general designed to attach drop seats to wheelchairs. The kits include four J-brackets, four L-brackets, and screws and locking nuts needed to adjust the brackets and to secure the brackets to the Drop Seat (see separate entry). The hardware in the Kits can be raised and lowered to adjust the Drop Seat. DIMENSIONS: Model 32517 fits chairs with 7/8-inch tubes and model 32518 fits chairs with one-inch tubes.

Adrian's Bus Pass/phone Holder (Model 173)

The Adrian's Bus Pass/Phone Holder, model 173, is a cell phone pouch designed for use by individuals with mobility disabilities or spinal cord injury. It hangs around the neck and keeps necessary items within reach, right in front. This machine-washable denim-shirt-shaped pouch has space for keys, bus pass, cell phone, and/or lunch money. DIMENSIONS: Approximately 5.5 x 5.5 inches at the broadest point; it narrows to 4 inches wide. The neck cord is 22 inches long. COLOR: Available in assorted co

Adt Companion Services Personal Response System

The ADT Companion Services Personal Response System is an emergency alert system with monitoring service designed for use by seniors or individuals with mobility disabilities, severe physical disabilities, or spinal cord injury. This monitoring system includes a base unit and one personal help button. The personal help button is waterproof and comes in one of three styles (wristband, pendant, or stationary button). It provides wireless two-way voice intercom at up to 300 feet from the base unit.

Adult Bib (Models 70212 & 70213)

The Adult Bib, models 70212 and 70213, is a bib designed for wear by individuals with upper extremity or eating and swallowing disabilities. These large, machine-washable and dryable bibs have 100 percent cotton fronts, fully-lined waterproof backs, and snap closure at the back of the neck. SIZES: One size fits most. DIMENSIONS (LxW): 36 x 18 inches. COLORS: Paisley (70212) or Floral (70213).

Adult Dual Paddle Extra-Wide Walker

The Adult Dual Paddle Extra-Wide Walker is a folding adjustable walker designed for use by individuals with walking disabilities who need additional weight capacity and width between the handgrips. The Ergonomic Paddle can be depressed with the palm for folding and unfolding of the walker. The handles "lock-in" when the walker is opened. This walker folds flat for compact storage. OPTIONS: Walker wheel and glide accessories are available. DIMENSION (HxDxW): 30 x 17 x 22 inches. The height adjust

Adult Head Float

The Adult Head Float is a float swimming aid designed for use by individuals with neurological or upper extremity disabilities. This device is useful for a swimmer with under-developed reflexes and minimal head and limb control. This float rests on the user's shoulders and wraps around the neck, holding the head above water. CAPACITY: 50 to 175 pounds.

Adult Hi-Waist Pant (Model 106)

The Adult Hi-Waist Pant, model 106, are men's trousers or women's slacks designed for use by wheelchair users. These cotton pants are cut higher in the back for people who use wheelchairs. Features include a full elastic waist, flat seams, belt loops, a roomier seat, and a fake fly. SIZES: 28, 30, 32, 34, 36, or 38. COLOR: Black or navy.

Adult Striped Reusable Bib

The Adult Striped Reusable Bib is a bib designed for use by adults with eating, swallowing, upper extremity, or severe physical disabilities. Designed to help protect clothing while eating, the front of the bib is made with heavyweight terry cloth, and it has a full length waterproof backing. Other features include colored binding and a Velcro neck closure. DIMENSIONS (LxW): 34 x 18 inches.

Advantage Comfort Male Urinal System

The Advantage Comfort Male Urinal System is a urinal with collection bag designed for use by individuals with mobility disabilities, severe physical disabilities, or spinal cord injury. The system includes a plastic urinal with a drainage tube leading to a two-liter collection bag. It can be used in a bed or wheelchair. A foam ring around the opening of the urinal provides comfort when the urinal is positioned and reduces the risk of skin breakdown associated with a urinal that is left in place

Advantage Female Urinal System

The Advantage Female Urinal System is a urinal with collection bag designed for use by women with severe physical disabilities or spinal cord injury. The system includes a plastic urinal with a drainage tube leading to a two-liter collection bag. A foam ring around the opening of the urinal is shaped to fit female anatomy and provide comfort. The foam is made of closed-cell, non-absorbent polyethylene. This system can be used in a bed or wheelchair. Urine rapidly drains from the urinal, through

Advantage Mesh Top Post Operative Shoe

The Advantage Mesh Top Post Operative Shoe is designed for use by persons recovering from surgeries to rehabilitate their foot or individuals with diabetic foot ulcers It protects wounds while they heal and reduces the risk of soft-tissue injury from friction or pressure. This product has a semi-rigid outer sole that provides medial and lateral stability. The breathable mesh upper. Each strap has a simple, one buckle closure for a customized fit. Includes 1 Advantage Mesh Top Post Operative Shoe

Advantage Standard Male Urinal System

The Advantage Standard Male Urinal System is a urinal with collection bag designed for use by individuals with severe physical disabilities or spinal cord injury. The system includes a plastic urinal with a drainage tube leading to a 2-liter collection bag. Urine rapidly drains from the urinal, through the tube, into the collection bag, leaving the urinal empty and ready for the next use. This allows the user to have access to an empty urinal without having to get out of bed, reducing the risk o

Advocate+ With Environmental Control

AdVOCAte+ With Environmental Control is a direct selection and scanning communicator and environmental control unit designed for use by indviduals with communication or speech disabilities together with severe physical disabilities or spinal cord injury. This portable unit provides environmental control capabilities with recorded speech output for communication. It has the same speech output and auditory prompt features as the adVOCAte communicator (see separate entry), but in addition has train

Aerodyne Pt 1100

The AeroDyne PT 1100 is an alternating air pressure mattress surface designed to prevent pressure sores for people with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This alternating pressure mattress system delivers pressure relief with 288 cycle changes per day. The pressure monitoring system uses pressure sensors, which monitor the user's movement and adjusts air pressure within the mattress to ensure maximum pressure relief. WARRANTY: One year warranty.

Aeroflow Ii Static Air Mattress (Models Msc061000 & Msc061002)

The Aeroflow II Static Air Mattress is an air mattress designed for use by individuals at risk for pressure sores / decubitis ulcers. This mattress is made of 16-gauge vinyl, and deflates instantly when an emergency release strap is pulled. It is latex-free and fits any size bed. It comes with an inflation indicator, and is available with a hand pump (model MSC061000) or without a hand pump (model MSC061002). DIMENSIONS (LxW): 76 x 34 inches when inflated.

Agility Plus

Agility Plus is a legrest designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This articulating, swing-away legrest come in a choice of mechanical elevation or independent power elevation and is springloaded, removable, and compact.

Ahf Spanish Dictionary

The AHF Spanish Dictionary is a word prediction program dictionary designed for use by people with upper extremity or severe physical disabilities or spinal cord injury. Designed for use with the REACH Interface Author, REACH with Smart Keys, REACH with Smart Lists, or SoothSayer programs (required, but not included; see separate entries), the program contains more than 39,000 Spanish words (translations for the 11,000 most frequently used English words). COMPATIBILITY: For use on IBM and compat

Air Bellow (Model B141Ba)

Round pneumatic bellows connected to plastic tubing which joins pressure switch. Pressure on bellows remotely activates electrical pressure switch located in appliance. Water, dust and shock proof. Pressure switch not included. Bellow can be connected to momentary, on/ off or sequencing air switches so electrical equipment can be turned on/ off or sequenced with no danger of shock.

Air Support

The Air Support is a bariatric air mattress designed for use by individuals who are at risk for pressure sores/ulcers and are obese. The mattress operates in alternating or static low-air Loss modes. The alternating mode features one-in-three alternation. The quilted top cover is waterproof, vapor permeable, and machine washable. The mattress features twenty reinforced inflatable cells. The mattress deflates quickly for CPR function and the mattress system is completely replaceable. Digital tech

Airkair Heel Protector

The AirKair Heel Protector is a heel protector designed for use by individuals at risk for or with pressure sores. The protector provides pressure reduction therapy by contouring to the foot and suspending the heel. This protector elevates the heel while reducing the pressure on the Achilles tendon. It is inflated with adjustable air pressure. Ventilation holes help reduce moisture build-up. SIZES: One size fits most. WEIGHT: Less than 0.5 pound.

Airkair Seat Cushion

The AirKair Seat Cushion is an air flotation seat cushion designed for use by individuals at risk of developing or who have pressure ulcers. This cushion conforms to the individual's shape for comfort and reduced pressure. It has a low profile design which fits most chair and wheelchair seats. The inflation is adjustable. n. DIMENSIONS (HxLxW): The cushion is 2 x 16 x 16 inches. CAPACITY: 250 pounds. WEIGHT: Less than 2 pounds.

Airlink Cordless Switch

The AirLink Cordless Switch is a touch switch designed for use by individuals with upper extremity disabilities. Used without a cord, it can be used to remotely activate appliances, toys, etc. connected to the PowerLink 3 (see separate entry) from a distance of 20 feet. Using the switch with the included cord causes it to function like a Jelly Bean Switch (see separate entry) to activate connected toys, appliances, etc. The switch is contained in a high-impact disk with a connectable base, enabl

Airvoter (Model Ac-0300-Av1V2)

The AirVoter, model AC-0300-AV1V2, is a pneumatic (sip and puff) voting machine control designed for use by voters with upper extremity disabilities or amputation, neurological or severe physical disabilities, spinal cord injury, or cerebral palsy. This system allows the user to vote independently on an accessible voting machine through sips or puffs on a disposable mouthpiece in time with visible or headphone-audible cues. After a voter has completed a ballot, the mouthpiece is discarded and th

Alertusa

AlertUSA is an emergency alert system with monitoring service designed for use by seniors or individuals with balance, mobility, or severe physical disabilities or spinal cord injury. This personal emergency response system (PERS) has two components: a portable, water-proof help button (transmitter), which the user wears or carries, and a receiver unit connected to the user's existing telephone line. If the user experiences a fall or other medical emergency or other type of emergency, he or she

All Purpose Table (Model F712)

The All Purpose Table, model F712, is a bed tray with a tilt top that will fold flat. It has clips for holding books or papers, and a laminated top with a lip at the front edge. DIMENSIONS: 12 x 18 x 17 inches.

All Purpose Toy Bar

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized adaptation of an all-purpose toy bar for a child with severe disabilities. This adaptation was created using a bunch of PVC to put together a giant toy bar. It was made very large so the child’s recliner and stander could be used with it. The dimensions could easily be adjusted to fit any child's needs. The sides are 12 inches wide and the bottom has an extra 5 inch piece of PVC plus a 3-way joint on each side for added stabili

All Terrain Walkaroos

These All Terrain Walkeroos are designed for individuals who use walkers to get around. The Walkaroos are supportive tips for walkers. They glide and move smoothly across carpet and floors while offering stability. Easy to install: remove old cap, put Walkaroo on and twist in place to secure. Comes in sets of 2. Designed not to catch on or mark flooring. Made of high density polyethylene. Non-porous material decreases chance of spreading harmful germs. Comes in a set of 2.

Allora

Allora is a keyboard communicator designed for use by individuals with speech or communication disabilities. This text-to-speech device enables any message typed on the keyboard and shown on the display to be read out clearly in a high-quality, natural sounding male or female voice. These digitized sounds can be used to attract attention, animate a conversation, orfor playback of a human voice or as a WAV or MP3 player. The synthesized voice (Realspeak) is available in different languages. The u

Alphabet Track

Alphabet Track is a pre-reading tutorial program designed for use by children with learning, vision, or cognitive disabilities. Students move through eight activities at their own pace. All the activities are switch-accessible and fully configurable to meet each student's individual needs. For example, students may decide to replace the program's built-in audio with their own voice reciting the alphabet and pronouncing each letter. The alphabet arc format used in each activity serves as a visual

Aluminium Threshold Ramp

The Aluminum Threshold Ramp is a threshold ramp designed for use by individuals who use wheelchairs or scooters. The ramp is manufactured of anodized aluminum and trimmed at the edges with a coarse finish strip to prevent the risk of slippage. The treads are slotted to facilitate drainage and stop the build up of ice. It is also transportable in the back of a car. DIMENSIONS: 2 or 3 feet long.

American Ramp System Amramp Modular Steel Wheelchair Ramp

The American Ramp System AmRamp Modular Steel Wheelchair Ramp is a modular ramp designed for use by individuals who use wheelchairs or scooters or who cannot use stairs. The steel mesh design of the ramp allows for rain and snow to pass through, minimizing slippery conditions. Ramps are available for permanent and temporary applications, and may be installed the next day after purchase or rental. Ramps are available with or without handrails on both sides. OPTIONS: Turning landings. DIMENSIONS:

Ameriphone Amsx Alertmaster Motion Sensor (Model 01884)

The Ameriphone AMSX AlertMaster Motion Sensor, model 01884, is a wireless security system designed to indicate the presence of someone in the house for individuals who are deaf or hard of hearing. It monitors the entry, hallway, or window and notifies the user of any unusual motion. POWER: Uses one 9-volt battery (included). WARRANTY: One year.

Ams Dodge Caravan Conversion

The AMS Dodge Conversion is a van conversion designed for use by individuals who use wheelchairs. This conversion makes a minivan into a wheelchair-accessible ramp van by completely remanufaturing the van to have a new lowered floor and power ramp system. This enables the wheelchair user to roll up into the van and park in one of several positions, including the driver's position. The conversion can be done for the Dodge Grand Caravan SE, which features anti-lock brakes, dual sliding doors, and

Ams Vans Chrysler Town And Country Conversion

The AMS Vans Town and Country Conversion is a van conversion designed for use by individuals who use wheelchairs. This conversion makes a minivan into an accessible wheelchair ramp van by completely remanufaturing the van to have a new lowered floor and power ramp system. This enables the wheelchair user to roll up into the van and park in one of several positions, including the driver's position. During the conversion, in addition to lowering the door and floor, the rear suspension is replaced

Analog Switch Pad

The Analog Switch Pad is a touch activated buttonswitch designed to control battery operated toys, environmental controls and computer access interfaces. The force adjustable electronic switch features a large activation area that is soft and compliant to the touch. Force sensitivity can be adjusted by a small dial from approximately one ounce to 32 ounces activation pressure, applied over an area ranging from the size of a fingertip to the size of the entire switch surface. A small LED lamp glo

Angel Fx

The Angel FX E.C.U. is an environmental control unit (ECU) designed for use by individuals with spinal cord injury or severe physical disabilities. This unit offers flexible control capabilities enabling control of a wide variety of equipment within the environment. This system can control table lamps, light fixtures, table fans, ceiling fans, air conditioning and heating systems, TVs, DVD and CD players, digital audio tape players, mini disk players, MP3 players, Blue Ray disc players, VCRs, FM

Angled Glasses (Model Dl5113)

Angled Glasses, model DL5113, also called Bed Spectacles, are prism glasses designed for use by individuals who spend extended periods watching television or reading while lying down. The lenses on these lightweight glasses are prisms that change the line of sight without distortion and enable the wearer to view an image as if it were straight ahead while the wearer is lying flat. These glasses can be worn over prescription glasses or bifocals.

Angler's Aid Rod Holder (Models Rh101 & Rh102)

The Angler's Aid Rod Holder is a fishing rod holder designed to enable one-handed fishing for people with upper extremity disabilities or amputation. This rod holder is made of molded plastic, and padded with soft foam rubber. This holder rests against the user's abdomen, and is held in place by waist and shoulder straps made of strong webbing with an easy on/off buckle. The rod insert is designed for straight-handled rods only, and is constructed to keep from breaking off under stress. The unit

Animal Rock (Model 3900)

Animal Rock, model 3900, is a sensory busy box designed for use by children with cognitive and severe physical disabilities. Pressing the frog activates a "ribbit" sound, press the dog and it "barks," and the cat "meows" when pressed. Three finger isolation buttons are located on the "rocks,"” which help promote manipulation and coordination skills. When pressed, the white button vibrates and makes soothing water sounds, the blue button makes owl sounds, and the black button activates a light a

Animal Switches (Models 16, 17,18, 19, 26, & 35)

The Animal Switches are touch switches designed for use by children with upper extremity disabilities. Available in a Kitty Switch (no.16), a Frog Switch (no. 17), a Fido (dog) Switch (no. 18), a Pig (no. 19), a Cow (no.26),and a Red Head Fish (no.35 ),these switches have detailed animal face on the large contact area. These switches activate with the slightest touch and can be used with any device adapted for single switch use. COLOR: The frog is green, the cat is yellow, the teddy bear is bla

Animated Educational Animals (Model 9312)

The Animated Educational Animals are voice output and educational toy animals designed for use by children with cognitive, learning, communication or physical disabilities, or visual impairments. The animals include CoCo the Chimpanzee, Manny the Manatee, and Pan Pan the Panda. When the user activates a capability switch (not included), each toys will say interesting things about its species, such as the fact that pandas eat up to 30 pounds of bamboo each day. Each touch of the switch will play

Announcer With 6 Levels (Models 5015)

The Announcer with 6 Levels, model 5015, is a sequencing direct selection communicator designed for use by individuals with speech or communication disabilities. This unit allows the user to first hear a series of words and then select one by simply activating its capability switch. The unit is mounted on a gooseneck for easy access. Features include six levels with 300 seconds of recording time, five-second messages, auditory cueing, auditory scanning, playback delay of 1 to 5 seconds, level ch

Annoying Monsters (Model 5124)

The Annoying Monsters, model 5124, are switch operated toys designed for use by children with upper extremity, mobility, cognitive or severe physical disabilities. Designed to resemble animated monsters, these plush toy monsters laugh, burp, scream and make silly sounds once the capability switch (not included) or the swirls on their bodies are pressed. Press their hand and they will repeat whatever is spoken in a silly voice. The monsters will snore as if asleep when the activation switch is n

Anti-Contamination Filter (Model 977)

The Anti-Contamination Filter is a pneumatic switch accessory designed for use with most sip-and-puff switches. This filter traps germs, mucous, and saliva, preventing contamination when a switch is used by more than one person. Model 966-F is a single filter and model 977 is a set of six filters.

Anti-Thrust Solid Seat Insert (Model Ssp40Xx)

The Anti-Thrust Solid Seat Insert, model SSP40XX, is a solid seat insert designed for use on wheelchairs. The solid seat insert includes HR foam, T-nuts, and an anti-thrust seat, model MOD4400. DIMENSIONS: The foam is 1.5-inches thick.

Apollo Advantage Seated Bathing System (Models 6000 & 6300)

The Apollo Advantage Seated Bathing System is a whirlpool bathtub designed for use by caregivers in bathing individuals with mobility or severe physical disabilities. The system includes a bathing cabinet with a front door. Bathers enter the tub in a comfortable,secure chair and are bathed while seated. The chair is designed to move easily to allow the caregiver access to all areas of the body. Four whirlpool jets provide a gentle, massaging motion while a thermometer monitors water temperature.

Application Clicker (Models Sm-32, Sm-32R, Sw-32, & Sw-32R)

Application Clicker is a cause and effect lesson authoring program designed for use in creating learning activites for children with cognitive or severe physical disabilities. This program can be used for making cause/effect activities from websites, DVDs, videos, or music. The program opens a window on the left of a screen on which the target is open. The user then positions the cursor over the desired target and presses S to start the counter. The program clicks on the Play link, which changes

Apt-5 Hi-Lo Active Passive Digital Trainer

The APT-5 Hi-Lo Active Passive Digital Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. Fully digital, this unit enables the user to control speed, resistance, amount of spins and load levels. A remote control facilitates operation for users with limited movement abilities. The unit is mounted on an adjustable stand so it can be positioned for either arm or leg ex

Aqua Creek Beach Stroller

The Aqua Creek Beach Stroller is designed for young children with limited mobility as a result of cerebral palsy, neurological involvement, and developmental delays to thoroughly enjoy the beach, sun and surf. Equipped with large inflated balloon tires, a collapsible PVC frame, non-corrosive stainless steel hardware and an advanced UV treated mesh vinyl cushion, this all-terrain stroller can safely transport users across the beach for years to come.

Aqua Sensitive Wash Gloves

The Aqua Sensitive Wash Gloves are disposable washcloths designed for use by caregivers of individuals with severe physical disabilities or incontinence that have sensitive skin. These gloves are intended to eliminate the use for soap and water when bathing people with sensitive skin, such as infants. They are made of a polyester viscose blend that is pre-moistened with hypoallergenic, perfume-free washing lotion that dries quickly and does not require rinsing with water or drying. They also hav

Aqua Shampoo Gloves

The Aqua Total Shampoo Gloves are disposable shampoo gloves designed for use by caregivers of individuals with upper extremity or severe physical disabilities. These gloves are intended to eliminate the use for soap and water when cleaning a person's hair. They are made of a polyester viscose blend that is pre-moistened with hypoallergenic washing lotion that dries quickly and does not require rinsing with water. Other features include a protective liner designed to protect caregivers against b

Aqua Sport-Outdoor Wash Gloves

The Aqua Sport-Outdoor Wash Gloves are disposable washcloths designed for use by caregivers of individuals with severe physical disabilities or incontinence. These gloves are intended to eliminate the use for soap and water when bathing people outdoors or immediately after taking part in sports. They are made of a polyester viscose blend that is pre-moistened with hypoallergenic washing lotion that dries quickly and does not require rinsing with water or drying. It also has a protective liner de

Aqua Total Hygiene Wash Gloves

The Aqua Total Hygiene Wash Gloves are disposable washcloths designed for use by caregivers of individuals with severe physical disabilities or incontinence. These gloves are intended to eliminate the use for soap and water when bathing people. They are made of a polyester viscose blend that is pre-moistened with hypoallergenic washing lotion that dries quickly and does not require rinsing with water or drying. Other features include a protective liner designed to protect caregivers against bac

Aqualine Bath

Aqualine Bath is a height adjustable bath designed for use by individuals with mobility and balance disabilities who require assistance with bathing. This bath benefits the caregiver as well as the user, as it is height-adjustable. Caregivers can set the height of the bath at a comfortable level for them, using a simple control panel, helping to avoid back strain. Access into the bath is via a ceiling/wall mounted track or a mobile system. An attachable showering and changing top is available

Aquanaut (Model 180-00)

The Aquanaut, model 180-00, is a molded elevated toilet seat and back support designed for use by children who require extra support while toileting. This children's toilet seat supports children in a forward-leaning posture that promotes relaxation and helps them to function on the toilet. It has a contoured sitting surface which provides support for the hips and thighs and a child-sized opening which is narrower in front and wider in the back for ease in hygiene. The unit also includes a remov

Aquatec Ocean Self Propel (Model 712900)

The Aquatec Ocean, model A712900, is a height-adjustable wheelchair shower commode designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The chair is constructed from stainless steel for maintenance-free use. The seat frame has a static ten-degree back tilt for comfort and the back upholstery is adjustable. Features include adjustable swing-away footrests, standard heel loops, locking front casters, rear wheelchair drive wheels with standard wheelch

Aquatec Ocean Shower Commode Chair (Model A710900)

The Aquatec Ocean, model A710900, is a height-adjustable caster shower commode designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The chair is constructed from stainless steel for maintenance-free use. The seat frame has a static ten-degree back tilt for comfort and the back upholstery is adjustable. Features include adjustable swing-away footrests, standard heel loops, locking casters, and flip-up arms. The chair rolls over most standard toilets

Aquatec Ocean Xl (Model 713900)

The Aquatec Ocean XL model A713900, is a height-adjustable wheelchair shower commode designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The chair is constructed from stainless steel for maintenance-free use. The seat frame has a static ten-degree back tilt for comfort and the back upholstery is adjustable. Features include adjustable swing-away footrests, standard heel loops, locking casters, and flip-up arms. The chair rolls over most standard t

Aquatic Access Lift (Model Igat-180Ad)

The Aquatic Access Lift, model IGAT-180AD, is a pool lift designed for use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. Designed specifically for pools and spas with pool covers, this lift provides elevated deck clearance to allow for automatic pool covers or pool/spa combinations. This lift is user-operable, and the seat height adjusts to accommodate various wheelchair heights. The seat rotates forward when entering the poo

Arial Wireless Call System

The Arial Wireless Call System is a call signal and emergency alert system designed for use by seniors or individuals with severe physical disabilities in hospitals, long term care facilities, or residential facilities. The system includes a water-resistant pendant that can be worn on a necklace, belt, or wristband. The user can communicate wirelessly with staff by pressing a button on the pendant. Calls can be answered at the nurse station or routed to staff pagers. The system uses 900 megaHert

Arm-A-Rest

The Arm-a-Rest is a carrying caddy designed for attachment to all wheelchairs with arm and/or back support. The pouches are fabricated of water repellant and stain resistant crushed velvet and drape over either the armrest or the back of the chair. The armrest version has a padded section which rests on top of the armrest pad; the bag storage version has a padded section which provides back support. The pouches attach with hook and loop strips. OPTIONS: A cushioned arm and storage pouch; a cushi

Armstrong Lift

The Armstrong Lift is a powered or manual wheelchair or scooter loader for sport utility vehicles (SUVs)designed for use by individuals with mobility disabilities or spinal cord injury. With the lift in its folded position, the ultra-compact, left-mounted single post design creates 100 percent clear interior floor space, a clearer side view, and allows the rear passenger seats to be fully assembled for use. The side-mount design increases rear bumper clearance for loading and unloading and the a

Armtrough Alternative

The Armtrough Alternative is an add-on armrest designed for use by individuals with upper extremity, severe physical, or neurological disabilities who use wheelchairs. This armrest cradles the arm in a range of positions and is padded for comfort. This adjustable unit is built with lateral for trunk support and to block elbow medially and includes an elbow stop to keep the elbow secure. The unit also comes with a hand block for hand and finger positioning.

Articulating Arm (Model H-1)

The Articulating Arm is switch mounting hardware designed to enable control switches and communicators to be placed in virtually any position for individuals with upper extremity or severe physical disabilities. The adjustable arm attaches to a table, wheelchair, bed rail, etc. Three knobs permit adjustability and lock the unit in position.

Artist Mouth Operated Brush/tool Holder.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Holder overcomes difficulty of gripping and manipulating brush or tool with hands and fingers. An ordinary plastic or rubber kitchen mixing tool is adapted to serve as a means to grip and manipulate the artist's brush using the teeth. Rubber or plastic tubing can also be attached to the brush to enhance ability to grip and manipulate it using the teeth. COMMENTS: For further information contact developers: National Institute on Art and Disabilities, 55

Ashtray With Remote Smoker Tube (Model 16C036)

The Ashtray with Remote Smoker Tube, model 16C036, is a remotesmoking device designed for use by individuals with severe or upper extremity disabilities or spinal cord injury. The consists of a clear tube attached on one end to the inside of the ashtray where the cigarette is placed; the other end of the tube acts as a mouthpiece for the user to smoke. The device is designed so that the cigarette remains contained in the ashtray if the user falls asleep while smoking. DIMENSIONS: The tube is 36

Ask Me More Tigger, Ask Me More Pooh, & Ask Me More Eeyore

Ask Me More Tigger, Ask Me More Pooh, and Ask Me More Eeyore are stuffed animals designed for use by children with upper extremity, vision, and severe physical disabilities. Sold separately, when children squeeze each animal's paw, they answer yes or no questions and occasionally ask questions of their own.

Asl 4 Function Sip & Puff Bed Control (Model Asl704)

The ASL 4 Function Sip & Puff Bed Control, model ASL704, is a pneumatic bed control designed for use by individuals with cerebral palsy, neurological disabilities, or severe physical disabilities. This control interface for a four- function electric bed or semi electric bed comes with a visual four function display and a sip n' puff control.

Asl 6 Function Big Button Bed Control (Model Asl706)

The ASL 6 Function Big Button Bed Control, model ASL706, is a bed control designed for use by individuals with fine motor disabilities, cerebral palsy, or neurological or severe physical disabilities. This control interface for a six-function electric bed has six large push buttons. To operate, this unit interfaces with the ASL 703 Six Function Bed Control (not included; see separate entry). It allows each function to be accessed through the use of large mechanical buttons in place of the small,

Asl 6 Function Sip & Puff Bed Control (Model Asl703)

The ASL 6 Function Sip & Puff Bed Control, model ASL703, is a pneumatic bed control designed for use by individuals with cerebral palsy, neurological disabilities, or severe physical disabilities. This controller for a six-function electric bed allows full control of a hospital bed through the use of a sip and puff control system. A sip command selects the bed function desired and a puff command activates the choice. The bed control interface comes with a visual six-function display and sip

Asl Egg Switch Finger Ring Mount (Model Asl300R)

The ASL Egg Switch Finger Ring Mount, model ASL300R, is switch mounting hardware designed for use by individuals with cerebral palsy or neurological or upper extremity disabilities. This mount for the ASL 300 Egg Switch (not included; see separate entry) holds the Egg Switch near the user's finger. Screws for the switch are included. OPTIONS: Egg switch (model ASL 300).

Asl Fiber Optic Sensor With Mono Port (Model Asl202-M)

The ASL Fiber Optic Sensor with Mono Port, model ASL202_M, is a sensor switch designed for use by individuals with mobility, communication, or severe physical disabilities. This single function switch has an adjustable activation range from touch to 2.5 inches, with a round target area. This fiber optic switch can be programmed for either normally open (NO) or normally closed (NC) operation. In the NO mode, switch activation occurs when an object is detected in the adjusted range. In the NC mode

Asl Five Switch Adaptor Interface Box (Model Asl502)

The ASL Five Switch Adaptor Interface Box, model ASL502, is a control switch interface unit designed for use by individuals with neurological or severe physical disabilities or spinal cord injury. This switch interface unit enables an individual to utilize five separate switch sites to control up to five separate functions or devices. The unit can interface with powered seating modules, communication devices, etc., through a D-9 connector. It works with any mono port switch and all power chair t

Asl Lip Switch (Model Asl301)

The ASL Lip Switch, model ASL301, is a light touch mechanical switch for the lip or tongue, designed for use by individuals with spinal cord injury or neurological or severe physical disabilities. This switch can be used for tongue or lip control of a powered wheelchair, computer, or other device. It has a mono port and comes integrated into a pneumatic tube that can be used for incorporation into a Sip n' Puff system.

Asl Low Voltage Power Leg Bag Emptier (Model Asl711)

The ASL Low Voltage Power Leg Bag Emptier, model ASL711, is a automatic leg bag emptier designed for use by individuals with neurological disabilities, spinal cord injury, or severe physical disabilities. This emptying mechanism for a leg bag receives power and operation signals from a for powered wheelchair. The leg bag emptying mechanism includes all necessary cables.

Asl Microlight Switch (Model Asl312)

The ASL Microlight Switch, model ASL312, is a chin or finger switch designed for use by individuals with neurological or severe physical disabilities or spinal cord injury. This mechanical switch can be activated with an extremely light touch by a finger, chin, or other body part. The switch has a mono port and can be used for computer access or for wheelchair control for all power chair types.

Asl Pneumatic Switch - Sip N Puff (Model Asl308)

The ASL Pneumatic Switch - Sip & Puff, model ASL308, is a pneumatic switch designed for use by individuals with cerebral palsy, neurological disabilities, upper extremity amputation, spinal cord injury, or upper extremity disabilities. This switch has two mono jack outputs that allow breath control of two separate functions. OPTIONS: ASL 607 series of sip n puff tube mounts.

Asl Proximity Sensor With Mono Port (Model Asl204-M)

The ASL Proximity Sensor with Mono Port, model ASL204-M, is a sensor switch designed for use by individuals with upper extremity disabilities. This "no touch" switch can be used with ASL proportional driver controls with power wheelchairs or for non driving purposes such as computer control. This single function switch has an activation range of touch to half inch. Activation occurs when it senses a hand or another part of the body in the activation area. This switch is intended to be used throu

Asl Scanning 6 Function Bed Control With Single Switch Activation (Model Asl702)

The ASL Scanning 6 Function Bed Control with Single Switch Activation, model ASL702, is a bed control designed for use by individuals with cerebral palsy, neurological disabilities, or severe physical disabilities. This scanning six- function bed control for a full electric bed can be operated as a single function. The bed control unit comes with an ASL 300 egg switch and ASL300R ring mount.

Asl Treadlite Switch (Model Asl309)

The ASL Treadlite Switch, model ASL309, is a foot switch designed for use by individuals with cerebral palsy, neurological disabilities, or severe physical disabilities. This medium-force paddle switch has a mono port and enabless gross motor extremity motion activation of a variety of devices.

Asl Wobble Switch - Light Pressure (Model Asl304A)

The ASL Wobble Switch - Light Pressure, model ASL304A, is a rocker switch designed for use by individuals with cerebral palsy or neurological or severe physical disabilities. This wobble switch can be used as a reset or mode switch for a powered wheelchair, computer, or other device, and is activated with light pressure. The switch has a mono port. OPTIONS: Armrest switch mounting bracket (model ASL 611).

Asl Wobble Switch - Medium Pressure (Model Asl304B)

The ASL Wobble Switch - Medium Pressure, ASL 304B, is a rocker switch designed for use by individuals with cerebral palsy or neurological or severe physical disabilities. This robust mechanical switch comes with a mono port and can be used as a reset or mode switch on a power wheelchair, computer, or other device for use by individuals with gross movements and limited control. OPTIONS: Armrest switch mounting bracket (model ASL 611).

Aspen Battery Powered Lift (Model Bp350)

The Aspen Battery Powered Lift, model BP350, is a pool lift designed for use by individual with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This lift lift is designed for installation in the decks of in-ground and above-ground pools/spas and has a single anchor point. The unit accommodates multiple setbacks, allowing for installation on pools/spas with large gutters and/or coping stones and has stainless steel construction with no paint to chip and no dissim

Assisted Exercise Kit

The Assisted Exercise Kit is an exercise planning program designed for use by physical therapists who work with aides, caregivers, or family members of individuals with stroke, brain injury, spinal cord injury, cerebral palsy, severe physical disabilities, fractures and other orthopedic conditions, multiple sclerosis, amyotrophic lateral sclerosis (ALS), Guillain Barre syndrome, brain tumor, cancer, tendinitis, or developmental disorders. This kit is available either as a set of reproducible car

Assistive Device For Trumpet

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with upper extremity disabilities and who used a wheelchair to play the trumpet. The trumpet was modified to allow the valves to be triggered electrically, through use of solenoids attached to the trumpet valves. A frame was built to mount the trumpet, switches, and necessary control circuity to the subject's wheelchair. The switches were positioned on the frame to permit their operation with wrist, knee and foot. The frame was made to be

Assistive Device Kit (Model A665322)

The Assistive Device Kit, model A665322, is a long-handled sponge, long-handled shoe horn, and a reacher designed for use by individuals with reduced reaching capabilities, including individuals with upper extremity and mobility disabilities. The set includes a standard Handi-Reacher; a round, long-handled sponge; and a long-handled shoe horn.

Asta-Cath Female Catheter Guide

The Asta-Cath Female Catheter Guide is cathetization aid designed for use by women with mobility, neurological, or severe physical disabilities, spinal cord injury, or urinary incontinence, or their caregivers. This device assists women in locating their urinary meatus. As the device is inserted into the vagina, it spreads the labia and one hole aligns with the urinary meatus. A 14 French or smaller catheter can then be passed into the bladder for emptying. The three alignment holes allow for mo

At Accessibility Suite

The AT Accessibility Suite is an on screen keyboard, mouse emulator, screen magnification, and word prediction program designed for use by individuals with fine motor, upper extremity, neurological, or severe physical disabilities or spinal cord injury. This software package includes computer access utilities for users of pointing devices: My-T-Mouse, OnScreen, CrossScanner, Joystick-To-Mouse, The Magnifier, SmartClick, TouchRight Utilities, and WordComplete (see separate entries). It runs concu

Ath-All Terrain Handcycle

The ATH- All Terrain Handcycle is a hand-propelled recumbent cycle designed for use by individuals with severe physical or lower extremity disabilities or spinal cord injury. It is designed for use on unpaved surfaces and trails. The Handcycle Elite features Shimano SLX components, including SLX M662 Derailleurs, SLX M660 9-speed Shifter Set, CS-HG61-12-36T cassette, SRAM PC-951 Chain, and Ergo-Lite handgrips. Other components are available. The crank arm is available in a variety of lengths and

Atlas, Atlas Ultra, And Atlas-Lc Ergonomic Book And Copy Holders

Atlas Ergonomic Book and Copy Holders are bookholders designed for use by individuals with upper extremity disabilities. Available in birch and Trespa (a strong wood product), these units hold books, newspapers, magazines, or individual sheets of paper at a comfortable angle for reading. The Standard Atlas consists of a solid base, a height- and angle-adjustable book support, a shelf, four page stoppers, a spring-loaded clip,and a line guide to hold the place on the page. The Atlas Ultra is also

Attendant Call Chime (Model 1499)

The Attendant Call Chime, model 1499, is a call signal designed for use by individuals with mobility and communication disabilities. This unit has a transmitter with a call button; when the button is depressed, a chime sounds at the receiver up to 40 feet away. The unit is adapted for use with a capability switch (not included). POWER: Uses 2 AA and 1 12-volt batteries. DIMENSIONS: 4 x 4 x 1 inches. WEIGHT: 0.05 pounds.

Attendant Caller

DO IT YOURSELF ENTRY --- PURPOSE: To enable a child with muscular dystrophy to summon assistance. A bicycle red LED light with a steady mode was purchased and opened up. The wires were fixed to points that would turn the lights on and off. Wires were then run to the outside of the light and connected to a micro switch (a limited pressure switch). The light was then mounted to the side of the back of the child's powered wheelchair using the standard bicycle mounting clamp that came with the light

Attendant Caller 2

DO IT YOURSELF ENTRY --- PURPOSE: To enable a child with muscular dystrophy to summon assistance at night while at camp. A cast off vibrating pager was modified by attaching very long lead wires that run to a micro switch, so when the father accompanies his son to camp, the child can page his father during the night instead of calling and waking the other campers. The child has the microswitch, and the father runs the wires across the room to his bed and wears the pager in his pocket. TITLE: Th

Audio Bible For The Blind

Audio Bible for the Blind is a recorded book designed for use by individuals who are blind or have low vision or severe physical disabilities. Bibles include the New Testament, Proverbs, and Psalms, and are available in English (King James Version or selected other versions) in cassette tape or CD/MP3 format. The MP3 format allows the user to locate books and chapters via keyboard shortcuts; it plays on a MP3-compatible CD player or on most Windows-based computers. Bibles are also available in a

Australian Medical Sheepskin

The Australian Medical Sheepskin is a decubitus pad designed for use by individuals at risk for pressure sores. The double-chrome tanned, high pile density Merino sheepskin is machine washable (up to 30 degrees Celcius). The soft, springy wool fibers of an Australian Medical Sheepkin absorb pressure from immobile limbs and joints, allow free air circulation, absorb moisture up to 34 percent of their dry weight without feeling wet, and wick the moisture away from the skin. DIMENSIONS (LxW): 42 to

Automark

The AutoMARK is a voice output and switch adapted voting machine designed for use by individuals who are blind or have low vision or upper extremity disabilities. This touchscreen electronic voting machines has adjustable on-screen font sizes for voters with low vision, voice output for voters who are blind, and a sip/puff tube for voters unable to use the touch screen or buttons. The unit also has multiple language capability and supports write-in candidates, and can be used in combination with

Aviary Crib

The Avery Crib is a circle bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this hand forged iron crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has doble drop-side access and a canopy assembly and includes a high-density foam mattress. OPTIONS: Bedding and linens watterproof pad, and mattress pad.

Awesome Action Figures

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To provide an opportunity for children who have difficulty holding and manipulating small items during play, participate in playtime by independently holding and manipulating action figures.

Axiom Mobility Xplorer 2

Axiom Mobility Xplorer 2 is a stroller designed for indoor or outdoor use by children with cerebral palsy, mobility disabilities, or severe physical disabilities. Features include an aluminum frame, adjustable footplate and straps, indoor swivel wheels, push-button wheel release, safety wrist strap, all-weather rain canopy, and tire pump. DIMENSIONS (HxLxW): 48 x 58 x 24 inches open and 14 x 40 x 20 inches folded and without wheels. The seat (LxW) is 15 x 15 inches and the back height is 28 inch

Axiom Mobility Xplorer 3

The Axiom Mobility Xplorer 3 is a stroller designed for indoor or outdoor use by children or adolescents with cerebral palsy, mobility disabilities, or severe physical disabilities. FRAME (HxLxW): Open the stroller is 52 x 48 x 27 inches and folded it is 14 x 40 x 23 inches. The frame is made from welded aluminum, and comes with a padded height-adjustable push handle, a sun canopy with viewing window, and a basket measuring 12 x 19 x 15 inches. SEAT (LxW): 15 x 18 inches. The reclining padded se

Axion Rotary Interface For Wheelchair Headrests

The Axion Rotary Interface™ for Wheelchair Headrests is a headrest accessory designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This device permits wheelchair headrests to rotate, and it attaches to most existing wheelchair headrests and hardware. This unit is quiet, free-running, and it does not require lubrication. The range of rotation can be limited or stopped.

Baby Beach Jogger

The Baby Beach Jogger is a stroller designed for use with children with lower extremity, mobility, or severe physical disabilities. This stroller has a stainless steel frame that collapses for transport and storage, large wheels designed to handle beach and other outdoor terrain, and a protective hood. WARRANTY: Five-year warranty on frame and a 30-day money back guarantee.

Baby Builders

Baby Builders is a video exercise program designed to teach parents of infants with cognitive, neurological and physical disabilities how to exercise their infant in a safe manner. Developed by a pediatric physical therapist, the program provides information on child development and exercise techniques to aid in development from birth through the time of walking. Baby Builders combines fun play activities with skills to build strength, balance, movement, and coordination. The program is availa

Baby Lambskin Rug + Woolskin

The Baby Lambskin Rug + Woolskin is a bed and decubitus pad pad designed for use with infants and children with severe physical or neurological disabilities or spinal cord injury. These lambskins can be used in cribs, beds, strollers, and car seats. DIMENSIONS: 26 x 36 inches. The pile is 24 millimeters. COLOR: Champagne.

Back And Joint Pain Reliever

The Back and Joint Pain Reliever is a machine that replicates the pain-relieving effects of inversion therapy while lying flat on one's back. Padded ankle and arm supports hold the body in place on the cushioned bench, while an easy-to-reach lever allows users to extend feet downward by applying only the amount of force that they find most comfortable. The result is a reviving stretch that relieves pressure on the spine as well as decompresses the joints in the shoulders, hips, knees and ankles.

Back Open Jacket (Models 353 To 367)

The Back Open Jacket is a child's or adult's jacket designed for wear by individuals who use wheelchairs. This machine-washable jacket is made of either sweatshirt fleece or Polartec and is designed for wear by individuals who sit for extended periods. Features include a ribbed V neck, a front zipper withpull ring, and Velcro tabbed back closure for ease in assisted dressing. Models 353 and 354 are made of sweatshirt fleece and models 360 to 367 are made of Polartec. SIZES: Models 353 and 363 ar

Back Overlapped Ladies Tops

The Back Overlapped Ladies Tops are women's blouses designed for women with limited arm mobility or for women who are dressed by caregivers. The smock-style blouse is available with long or short sleeves in cotton or double napped flannel. It opens flat for ease in dressing, and closes with two buttons at each shoulder. The back overlaps, creating a double yoke for added warmth. SIZES: Small, medium, large, extra-large, extra-extra-large, and extra-extra-extra-large. COLOR: Cotton available in a

Back Snap Gown (Model 19-05)

The Back Snap Gown, model 19-05, is a hospital-style women's gown designed for use by those with physical disabilities. This gown features short sleeves, a lace trimmed breast pocket, two snaps in back, and a wrap cover. SIZE: Basic sizes include small, medium, large, and extra large. Larger sizes include extra extra large, and extra extra extra large. COLOR: Assorted prints.

Back Snap Gown (Model 27-02)

The Back Snap Gown, model 27-02, is a men's hospital-style gown designed for use by individuals with physical disabilities. Made of polyester and cotton blend fabric, this gown features a wrap cover back with two snap closings. SIZE: Small, medium, large, or extra large. COLOR: Assorted patterns and colors.

Back Snap Mens Sport Shirt

The Back Snap Mens Sport Shirt, is a men's shirt designed for wear by men with mobility disabilities or those who have difficulty dressing. This golf-style shirt with front placket is designed with three front-opening functional buttons to make dressing and undressing less difficult. The shirt is made of cotton and polyester knit. The shirt can be ordered in the short or long sleeve version. SIZES: Small, medium, and large are standard. Extra large, extra extra large, extra extra extra large, an

Back Snap Niteshirt (Model 27-03)

The Back Snap Niteshirt, model, 2703 is a men's nightshirt designed for use by wheelchair users or individuals who spend a lot of time in bed. Made of a cotton and polyester blend fabric, this nighthirt snaps all the way down the back. It features long sleeves, a pocket, button front trim and contrast piping trim. SIZES: Small, medium, large, or extra large. COLOR: Assorted patterns and colors.

Back Support Wedge (Model 9Ffsw)

The Back Support Wedge, model 9FFSW, is a positioning wedge designed for use with children with neurological or severe physical disabilities. This covered foam wedge provides firm support at 45 degrees. DIMENSIONS (HxWxL): 12.5 x 24 x 12.5 inches.

Backpack Retriever

The Backpack Retriever is a wheelchair back pouch access aid designed for use by individuals who use wheelchairs. This device brings a backpack from behind the chair to within reach of the user with a click of a button. Without increasing the overall dimensions of the wheelchair, the unit is aesthetically designed to fit most power wheelchairs and does not interfere with accessibility through doorways. The patented linkage mechanism enables the device to be used in close or confined areas such a

Backsnap Fleece Robe

The Backsnap Fleece Robe is a women’s robe designed for use by women with mobility disabilities or other physical disabilities. Made of 100 percent acrylic fleece, this robe has long sleeves and a round yoke, and patch pockets. SIZE: Small, medium, large, extra large, extra extra large, and extra extra extra large. COLOR: Solid prints.

Ball Switch (Model 3Tstm)

The Ball Switch, model 3TSTM, is designed for use by individuals with severe physical or upper extremity disabilities.This switch features a large ball with a knobby surface attached to a long tube connected to the switch box. From the other side of the switch box comes a cord which coonects to the switch-adapted toy or appliance. When the ball is squeezed, the switch activates the device.

Band Jam (Model 1115)

The Band Jam, model 1115, is a switch-adapted musical instrument designed for use by individuals with severe physical or upper extremity disabilities. The unit has five percussion instruments in one base. Activating any of the photo buttons enables the user to play a tambourine, triangle, drum, cymbal or maraca while multicolored LEDs light up. POWER: Uses 8 C batteries. DIMENSIONS (LxWxH): 21 x 17 x 12 inches.WEIGHT: 5 pounds.

Bandana Clothing Protector (Model 16T086)

The Bandana Clothing Protector, model 16T086, is a bib designed for use by individuals with eating or upper extremity disabilities. Draped around the front of the neck with a hook-and-loop fastener, this bandana scarf protects the wearer against food or liquid spills. It is made of 100 percent cotton with a moisture proof inner layer. The material is latex free and washable. DIMENSIONS (LxW): 13 x 26 inches. COLOR: Various colors available.

Bariatric Belgrave Commode (Model 190)

The Bariatric Belgrave Commode, model 190, is a height-adjustable commode with removable arms designed for large individuals with mobility or severe physical disabilities. This commode has a dip-coated, non-peel frame; a padded backrest and commode seat cover; a molded clip-on commode seat; and a removable oval commode pan. DIMENSIONS: The seat height adjusts from 460 to 610 millimeters (mm), the width between arms is 605 mm, the seat depth is 430 mm, the distance from the eat to the top of the

Bariatric Wheelchair Cushion (Models Msc26320184, Msc26322184, Msc26324184, Msc26326184, & Msc26328184)

The Bariatric Wheelchair Cushion is a gel and foam seat cushion designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. The cushion is constructed with a gel pack placed between two layers of foam, and it has a Nylex cover. DIMENSIONS (HxLxW): 4 x 18 x 20 inches (model MSC26320184), 4 x 18 x 22 inches (model MSC26322184), 4 x 18 x 24 inches (model MSC26324184), 4 x 18 x 26 inches (model MSC26326184), or 4 x 18 x 28 inches (model MSC26328184). CAPACITY

Barney (Model 5126)

Barney, model 5126, is a switch operated toy designed for use by children with upper extremity, cognitive, or mobility disabilities. By activating a connected capability switch (required but not included), a child can listen to Barney, the purple dinosaur, happily sing his favorite song, “I Love You”. POWER: Uses two AA batteries (not included). DIMENSIONS (HxDxW): 6 x 2 x 5 inches. WEIGHT: 0.05 pounds.

Barrier Free Water Dam

The Barrier Free Water Dam is a water dam for showers designed to provide access to a roll-in shower by wheelchair and rolling shower chairs users while containing water. The soft vinyl dam is flexible for wheelchairs to roll over and then return to an upright position. It can be used in conjunction with a shower curtain to keep water in the shower area. The vinyl dam, made of poly-vinyl chloride, fits into an anodized and polished aluminum threshold. Installation requires a hack saw, measu

Bass Switch

The BASS Switch is a touch switch designed for use by individuals with upper extremity and severe physical disabilities. This switch can be used to activate switch-adapted toys and appliances and requires three to five ounces of pressure for activation. This switch has a large surface, a low profile, and a non-skid bottom. DIMENSIONS: 6 x 3.75 x 1 inches. COLOR: The switch comes with red, yellow, green, blue, and black plate overlays.

Bath Board (Model 09200)

The Bath Board is a bathboard designed for use by individuals with balance disabilities or lower extremity disabilities who require support while bathing. The Bath Board attaches securely to most bathtubs. The board is equipped with rubber-covered clamps to secure it to the tub and they resist slipping and protect surfaces from scratching. It has a built in soap holder. OPTIONS: Safety handle sold separately. DIMENSIONS: The width adjusts from 17.75 inches to 28 inches. CAPACITY: 250 pounds. CO

Bath Cape With Hood (Model 031)

The Bath Cape with Hood, model 031 is a men's or women's robe designed for individuals with mobility or physical disabilities. This long-sleeved terry cloth bath cape is cut generously in the front for complete coverage and cut higher in the back for seated wear. This garment is helpful for after showering for drying, for warmth, and for waiting to transfer. SIZE: One size fits all. COLOR: White

Bath In Bed (Model Bb-1) & Portable Bath In Bed (Model Pbb-1)

The Portable Bath in Bed, model PBB-1, is a bed shower designed for use by individuals with mobility or severe physical disabilities. This system consists of a soft, flexible under liner surrounded by a lightweight, collapsible aluminum frame that supports the liner to create a bathtub; a shower unit with an electric pump to dispense water with the capacity to provide one continuous 10.5-minute shower; a flexible hose that connects to the under liner and the included waste water collection bottl

Bath One Shower Commode Chair (Model 7200)

The Bath One Shower Commode Chair, model 7200, is a commode chair designed for use by individuals with balance, mobility, or lower extremity disabilities. The unit features a molded plastic seat and back, aluminum legs, and bucket with lid. ASSEMBLY: Complete assembly includes snapping the back and legs in place. For carrying or storage, the legs and back can be clipped onto the anti-slip seat. OPTIONS: Attachable armrest and urine splash cup. DIMENSIONS (HxLxW): 20.5 x 18.5 x 4 inches. CAPACIT

Bath Poncho (Model 27-11)

The Bath Poncho, model 27-11, is a men's bath poncho designed for use by individuals with physical disabilities. This cotton terrycloth poncho fits over the head and is held in place with side snaps. SIZE: One size fits all. COLOR: White only.

Bath Seat

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with multiple disabilities, including cerebral palsy and lung disease while bathing. This "Fogarty" style seat has a molded plastic seat mounted in a frame made of plastic pipe. It is equipped with a pelvic belt and a T-bar to hold the child in place. TITLE: All in the Family. JOURNAL: TAD Journal. REF: Volume 25, Number 4, Summer 2005. PAGES: 12-14. Number of pages: 4 (including cover).

Bath+Safe Lock-On Elevated Toilet Seat (Models F725753100 & F725753110)

The Bath+Safe Lock-On Elevated Toilet Seat, models F725753100 and F725753110, is an elevated toilet seat designed for use by individuals with lower extremity disabilities. The unit has a locking mechanism that secures it to the toilet for stability. Openings in the front and back allow for easy access. Model F725753110 has arms that provide support while getting on and off the toilet. DIMENSIONS: Five inches high. Width between arms is 19 inches. CAPACITY: 300 pounds.

Bathmaster Sonaris

Bathmaster Sonaris is designed to assist users with limited mobility and balance as well as their caregivers during transfers in and out of the bathtub. The Bathmaster Sonaris is operated by a rechargeable battery and can perform an average of 18 lifts per charge. There is an audible beep and a blinking light to alert you when the battery needs to be recharged. The operator buttons on the hand controller are simple and large to make it easy for anyone to operate. The seat and back snap together

Bathroom Ceiling Lift

DO-IT-YOURSELF-ENTRY --- PURPOSE: To enable a person who uses a wheelchair to make transfers in the bathroom. A U-shaped channel runs through the ceiling and is supported by the rafters. Operated by a 440-pound hoist motor, the figure-eight-shaped system enables the user to go backward, forward, right, or left. The lift, equipped with a transfer lift sling, swivels to allow changes of direction. . MATERIALS: Channel, cables, controller, motor, and lift sling. TOOLS: Shop tools. SKILLS REQUIRED:

Bathroom Gem Floor Toilet

The Bathroom Gem Wedge Toilet is a floor toilet designed for use by individuals who use catheters and leg bags. Intended to assist in independent management of leg bag emptying, this stainless steel toilet sits flush with floor and can be installed in any convenient location selected by the individual; it is designed to fit easily between the floor joists in most homes. The flushing mechanism is activated by an electronic sensor when a wheelchair is moved over the unit and ceases when a wheelch

Bathroom Gem Spring Leg Bag Release System

The Bathroom Gem Spring Leg Bag Release System is a leg bag emptier designed for use by individuals who use urinary leg bags. This mechanical device does not come in contact with urine, eliminating the need for daily cleaning. The leg bag's tubing is crimped by a spring-driven cylinder to stop liquid from leaving the bag. An easy-to-use lever, which can be mounted anywhere on a wheelchair that is convenient for the user, draws a cable to pull the cylinder away from the tubing, allowing liquid to

Bathroom Gem Wedge Toilet

The Bathroom Gem Wedge Toilet is a floor toilet designed for use by individuals who use catheters and leg bags. Intended to assist in independent management of leg bag emptying, this stainless steel toilet sits on the floor and can be installed in any convenient location selected by the individual; special installation is not required and it can be moved from one location to another. The flushing mechanism is activated by an electronic sensor when a wheelchair is moved over the unit and ceases w

Battery Device Adapter

"DO IT YOURSELF" ENTRY --- PURPOSE: To adapt toys and small appliances for switch use. To make the device, separate the leads approximately one-half inch from both ends of the speaker wire using scissors or a knife. Using wire strippers or scissors, strip approximately one-quarter inch of the protective plastic insulator from each wire lead, being careful not to cut any of the wires. Unscrew the plastic case from the inline phone jack to expose two terminals with holes in them. Run the wire thro

Battery Interrupter

The Battery Interrupter is a battery interface control for toys designed to create switch compatibility for non-adapted toys for individuals with fine motor or physical disabilities. It is a cable that fits between any battery-operated toy or device and a switch, permitting the toy or device to be operated by the switch. It interrupts the power by inserting a disc between on of the batteries and the adjacent anode. There are two models available for battery sizes AA and AAA or C and D batteries.

Battery Interrupter Kit 2

The Battery Interrupter Kit 2 is a control input interface designed to enable individuals to adapt toys and other battery-operated devices for use with capability switches. This kit can be used to adapted battery-powered toys or devices equipped with a simple on/off switch. The kit includes one Jumbo Switch, one Gumball Switch, one Button Click Switch (switches also sold separately; see entries), three double-A battery interrupters, and three C and D battery interrupters. COLOR: The Jumbo Switch

Bci Music

---- PROTOTYPE --------- PURPOSE: To create a prototype of an adapted brain-computer interface (BCI) device which allows individuals with paralysis and/or severe disabilities play music by brain power alone. Developed by Eduardo Miranda at the University of Plymouth Interdisciplinary Centre for Computer Music Research (ICCMR) in the United Kingdom, this BCI device allows individuals with neurodegenerative diseases, muscular disorders, and paralysis to participate in creating music. Miranda’s ins

Beach Cruzr & Beach Cruzr 4 Two

The Beach Cruzr and the Beach Cruzr 4 Two are powered beach wheelchairs designed for use by individuals with mobility disabilities. The Beach Cruzr is an aluminum beach chair mounted on four wheels that can be used on sand. The Beach Cruzr 4 Two is also mounted on four wheels and can be used on sand, and in addition it features two seats. FRAME (LxWxH): Both chairs have a folding aluminum frame, stainless steel hardware, and an extended foot area to allow the user's legs to be stretched in front

Bead Chain In A Box (Model 644)

The Bead Chain in a Box, model 644, is a sensory integration activity designed to provide sensory stimulation for children with disabilities It features strands of small beads in a sturdy plastic box. When children touch any of the beads, lights flash, music plays, and vibration is felt. POWER: Uses six double-A batteries (not included). DIMENSIONS (LxW): 14.75 x 11.25 inches.

Beaker With Holder & Lid

The Beaker with Holder & Lid is a cup with holder and spout designed for use by individuals with spinal cord injury, severe physical disabilities, or upper extremity disabilities. The cup is made of polycarbonate and has a polypropene holder with a large D-shaped handle. The polypropene lid is equipped with a spout. The cup is heat insulated and is suitable for hot or cold liquids.

Beam

Beam is a mouse emulator designed for use by individuals with spinal cord injury or severe physical or upper extremity disabilities. This device is generally used by those with adaptive switches who wish to break the hard connection between the switch and their computers. Beam enables a HeadMouse Extreme (see entry) user to actuate the left, right, and middle mouse buttons using adaptive switches without a direct connection to the HeadMouse. For a Swifty (see entry) user, the Beam sends up to th

Bean Bag Beds (Models 9Sbbb & 9Jbbb)

Bean Bag Beds are body positioners designed for use by children and adults with neurological or severe physical disabilities. Made of tough, wipe-clean vinyl, these positioners conform to the user's body shape. SIZES: Model 9SBBB is a Senior Bean Bag and model 9JBBB is a Junior Bean Bag. DIMENSIONS (HxLxW): Model 9SBBB is 25 x 215 x 78 centimeters and model 9JBBB is 25 x 120 x 60 centimeters.

Bed And Lap Tray (Model P5001)

The Bed and Lap Tray, model P5001, is a bed tray designed for use by individuals with mobility disabilities. Made of wood, this tray has a laminated top that tilts for reading or writing or lies flat for eating. Adjustable legs allow the tray to be used in bed, in a wheelchair, or in a lift chair.

Bed Assist For Home Style Beds With Cushioned Hand Grip

Bed Assist Handle for Home Style Beds with Cushioned Hand Grip is designed for persons with limited mobility, the elderly, or those who have difficulty with balance, as it helps the user get in and out of bed safely. To set up, slide between the box spring and mattress. Laminated wood base. Cushioned hand grip.

Bed Desk

The Bed Desk is a bed tray, bookholder, and laptop/notebook computer support designed for use by individuals with mobility, upper extremity, or severe physical disabilities or spinal cord injury. This unit is a book stand with legs like a bed tray. The two legs are collapsible and the desk can be adjusted to an angle for holding books, paper, or magazines. Made of imported Baltic birch, the unit supports up to 20 pounds and can be used with the legs extended or folded. When the legs are folded,

Bed Mount For Ipad 2,3,4

Bed Mount for iPad 2,3,4 is designed to individuals with multiple sclerosis, muscular dystrophy, spinal cord injuries or any other other neurological impairments that impact mobility and accessibility while positioned in bed. The Bed Mount is designed to work for all types of mattresses. It is positioned under the mattress for stability.

Bed Pan

The Bed Pan is a bed pan designed for use by individuals with severe physical disabilities. The pan is made of lightweight polyethylene, has a contoured design and side grips, and is designed to be easy to clean. The pan holds 108 ounces.

Bed Prism Glasses (Model 5198)

Bed Prism Glasses, model 5198, are prism glasses designed for use by individuals with severe physical disabilities or spinal cord injury. These glasses have right angle prisms to enable users to read, write, or watch TV while lying down without lifting or moving their heads.

Bed Rail Padding

CUSTOM ADAPTATION PURPOSE: To prevent an individual who has Huntington’s disease from injuring herself on the rails of her hospital bed. Made of wood, the rails posed a danger to the individual as she thrashes in her sleep and because she got her arms and legs trapped between the rails. The rails were removed and covered with two layers of foam rubber tubing. The rails were then covered with velour fabric by sliding the rails into pockets on the fabric panels. The rails were then reattached to

Bed Raiser

CUSTOM ADAPTATION PURPOSE: To enable caregivers to assist individuals in and out of bed without bending. A boxed frame of plywood and chipboard was nade to elevate a wood-frame bed. The lengthwise edges were recessed toward the center of the bed enabling the caregiver to to get as close to the bed as possible. Detachable sidepieces slot into the bed frame to prevent the individual from falling out of bed. The sidepieces fit at the end of the bed when not in use. DIMENSIONS: The unit raises the

Bed Specs

Bed Specs are prism glasses designed for use by individuals with spinal cord injury or severe physical disabilities. These glasses have right angle prisms that change the user's line of sight 90 degrees downward to enable him or her to read, write, or watch TV while lying down without lifting or moving their heads. These glasses have polycarbonate frames with a molded nose piece. DIMENSIONS (WxH): Frames are 6 x 1.25 inches. The inside lenses are 0.875 x 0.75 inch and the outside lenses project

Bed Spectacles (Model 228)

Bed Spectacles, model 228, are prism glasses designed for use by individuals with severe physical disabilities or spinal cord injury. These glasses have right angle prisms to enable users to read, write, or watch TV while lying down without lifting or moving their heads. A carrying case is included. WARRANTY: One year.

Bed Surround

CUSTOM ADAPTATION PURPOSE: To provide a customized adaptation to a hospital bed frame for a young adult with a rare genetic disorder. A standard hospital bed with collapsible tubular steel rails was not ideal as the consumer was in danger of injuring himself due to involuntary movements. Placing the bed flush to the floor was not ideal for caregivers because it placed them at risk for back injury. A frame and net system was designed to attach to the existing hospital bed. Four metal posts are m

Bedmount For Ipad Air

BedMount for iPad Air is designed for individuals with multiple sclerosis, muscular dystrophy, spinal cord injuries or any other neurological impairments that impact mobility and accessibility while positioned in bed. The Bed Mount is designed to work for all types of mattresses. It is positioned under the mattress for stability.

Bedside Commode (Model 8450)

The Bedside Commode, model 8450, is a height-adjustable commode designed for use by individuals with balance, mobility, and incontinence. The commode has a rust-resistant, powder-coated welded frame and includes a back, pail, and splash guard. DIMENSIONS: Seat height adjusts from 17 to 23 inches; the width between the arms is 18 inchesand the overall width is 22 inches; seat depth to backrest is 17.5 inches. CAPACITY: Maximum weight capacity is 350 pounds.

Bedside Commode (Model 8520) & 3 - 1 Commode (Model 8500)

The Bedside Commode, model 8520, and the 3 - 1 Commode, model 8500, are height adjustable commodes designed for use by individuals with balance and mobility disabilities and incontinence. Both models include a pail with a lid, and splash guard. They feature snap together frames and are angle- and height-adjustable. The 3 - 1 Commode has no back support and is designed to be placed over a toilet. DIMENSIONS: Seat height adjusts from 19 to 23 inches; the width between the arms is 18 inches and

Bedside Computer Stand

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to utilize a computer from a bed. The base of the stand is a standard overbed table on a wheeled base. A box of varnished plywood on a caster base was added to the table. The box was equipped with a central shelf, creating three surfaces on which to store computer equipment and other items. The original table surface was attached to the side of the box and is height adjustable using a trinut. The surface also rotates so

Bedside Computer Stand And Monitor Positioning System

CUSTOM ADAPTATION PURPOSE: To position a computer screen to be easily seen from a bed, hold the monitor and printer, and store other computer-related equipment such as cables and CDs) for an individual with quadriplegia. Laminated MDF was used to make a stand, which has a base with locking castors, a range of drawers for storage at the bottom and shelves above them, one with larger space to hold the monitor. There is also a pull-out shelf above the drawers for a keyboard and can be used when i

Bedside Steel Commode With Cream Finish

The Bedside Steel Commode with Cream Finish is a height- adjustable commode designed for use by individuals with severe physical disabilities. The removable back allows for placement over a toilet. This commode can be used as a stand-alone commode, as a raised toilet seat, and as a safety frame. It is equipped with skid-resistant rubber tips and a commode pail without a splash guard. The pail capacity is nine quarts DIMENSIONS (HxDxW): 26 x 19.25 x 21 inches. The width between the arms is 19.7

Beetles

Beetles is a cause and effect training program designed for use by students with cognitive and developmental disabilities. The Beetles play songs using the choice of 20 instruments selected by the user. The program is accessible by mouse, touch screen, and switch and enables the user to give each Beetle a different instrument and hear the group play a song. The user can then change instruments and hear the song again. The program provides 55 ready-made songs in a variety of styles, including Ame

Ben Ka Choo (Model 8063)

Ben Ka Choo, model 8063, is a switch operated toy designed for use by children with fine motor, upper extremity or severe physical disabilities or spinal cord injury. This plush hippo acts as if it has allergies when activated. Once the user activates the capability switch or squeezes its tail, sounds of six different sneezes along with the words “whoa” and “excuse me” can be heard. This toy comes with "Sink or Swim," a story book, and a page of stickers. The story encourages language developme

Bendable Telescopic Mouth Stick (Models 538201, 538202, 538203, & 538204)

The Bendable Telescopic Mouth Stick, models 538201,538202, 53803 and 538204 is a mouthstick designed for use by individuals with cerebral palsy, spinal cord injury, or neurological, severe physical or upper extremity disabilities. The mouthstick has an adjustable angle for better visibility. Models 538201 and 538202 are designed to hold implements such as a pen, pencil or paintbrush, and models 53803 and 53804 can be used as a keyboard pointer or page turner. The telescoping end makes it easy to

Bentley

The Bentley is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. This chair can be propelled by hand and/or foot in and out of tilt. FRAME: The overall width with 12- or 16-inch wheels is the seat width plus 9.5 inches; with 20- or 24-inch wheels and hand rims the overall width is the seat width plus 10.5 inches and without hand rims, the width is the seat width plus 9 inch

Bernie The Dragon (Model 8056)

Bernie the Dragon, model 8056, is a switch operated toy designed for use by children with upper extremity, mobility, cognitive or severe physical disabilities or spinal cord injury. The toy is activated with a capability switch (not included) or by squeezing the dragon’s paw. The toy allows the child to listen to a song, “Burning Love,” as his mouth lights up and his head sways. Press the switch again to stop the song. POWER: Uses 3 AA batteries. DIMENSIONS (HxLxW): 12 x 18 x 12 inches.

Better Baby Seat, The

The Better Baby Seat is a body positioner designed for infants with digestive, physical, and neurological disabilities. This seat can position the child at 30 degrees in the prone position to aid with gastro-esophageal reflux. A firm support for the head and trunk is included. The seat can also be used for reclined positioning. In both positions, the child is secures with a soft, roomy diaper-style seat harness. The harness and a removable, washable pad are included. OPTIONS: A vinyl pad and har

Bi-Level Computer Workstation

The Bi-Level Computer Workstation is a height-adjustable computer table designed for use by individuals who use wheelchairs. The height adjustment range starts low for young children or those using manual wheelchairs, and the height adjusts sufficiently to provide ample knee and arm-rest clearance for powered wheelchair users. Two hand cranks allow both work surfaces to be adjusted independently for correct view-height and balance between keyboard and monitor. DIMENSIONS (HxLxW): The keyboard su

Bib (Model M2830)

The Bib, model M2830, is an extra length, cotton bib designed for both men and women. COLORS: Assorted prints and colors.

Big Ben Shopper

Wheelchair back pouch attaches to handgrips of wheelchair with straps. Room for complete change of clothes, lap robe, or other large items. 16 by 17 inches. Black or saddle. Vinyl.

Big Bend Clip

The Big Bend Clip is a bookholder, document holder, or switch mounting hardware designed for use by individuals with upper extremity disabilities. This device consists of an adjustable clamp base with an expandable gooseneck-style flexible arm attached to a large alligator clip. This unit can be clamped to the Convert-Able Table (see separate entry), a wheelchair tray, or other flat surface to hold books, toys, photographs, switches, and other items. Using two clips enables larger, heavier items

Big Boyz Scale System (Model 1226)

The Big Boyz Scale System, model 1226, is a digital scale accessory designed for use by individuals with mobility disabilities or severe physical disabilities or spinal cord injury. This is a retrofit weighing system that uses four transducers to turn an entire bed into a scale system. It works with all Big Boyz bariatric bed models, including King's Pride and Queen's Pride (see separate entries). The user’s weight is displayed on a 16-character dot matrix liquid crystal display (LCD) with L.E.D

Big Bright Plate Switch

The Big Bright Plate Switch is a touch switch designed to activate toys and appliances for individuals with upper extremity disabilities. This switch features a bright plate on a dark base to assist users with visual disabilities. The switch activates with medium pressure on the plate and the sensitivity can be adjusted using the screws on the face plate. The switch can be used with any switch-adapted toy or appliance with a 1/8th-inch jack. DIMENSIONS: 5 x 11 inches. COLOR: Bright yellow plate

Big Buddy Button (Models 56500, 56520, 56540, 56200, 56100, & 56600)

Big Buddy Buttons are touch switches designed to enable individuals with severe physical, motor control, or upper extremity disabilities or spinal cord injury to control switch-adapted devices. Devices connected to the switches can be activated by pressing anywhere on the large top surface. Activation can be accomplished by exerting 5.3 ounces of force on the switch edges or 10.7 ounces of force at the center. A non-slip rubber base is included with each button. COLOR: Raving red (model 56100),

Big Button Electric Bed Control

The Big Button Electric Bed Control is a bed control panel designed for use by individuals with fine motor, upper extremity, or severe physical disabilities or spinal cord injury. The control face features six large, heavy-duty buttons to control the head up/down, foot up/down, and bed up/down. Buttons function using the weight of the user's hand and do not require finger dexterity.

Big Kid Teepee (Model T-291)

The Big Kid Teepee, model T-291) is an accessible playhouse designed for use by children who use wheelchairs. The teepee-style tent is made of fade-resistant, fire-retardant, water-repellent ripstop nylon with pole pockets that enable the tent to be collapsed for storage without removing the poles. The poles are made of splinter-proof PVC plastic pipe and feature soft vinyl protective end caps. The set includes a permanent care and usage label, a full-color hang tag with instructions, and a sto

Big Red Switch

The Big Red Switch is a touch switch designed to enable individuals with upper extremity disabilities to control switch-adapted devices, appliances, or toys. Made of shatterproof plastic this switch has a large, bright target for easy access and activation. The entire target surface is responsive, and the switch pad is sensitive to less than three ounces of pressure. This switch provides audible feedback on activation.

Big Screen

The Big Screen is a tablet or touch screen stylus designed for use by individuals with grasping, fine motor, neurological, sever physical or upper extremity disabilities or spinal cord injury. This telescoping stylus allows the user to input exerting very low pressure. Three differently colored models differ slightly in diameter. All styluses telescope continuously from fully collapsed to fully extended. The shorter length is suitable for the iPhone, iTouch, or another cell phone, while greater

Big:calc

Big:Calc is a voice output, large print calculator designed for use by persons with low vision or cognitive or physical disabilities. It features large number keys, high-quality speech and built-in scanning. Triggered by either a mouse click or a switch, the unit can be used by itself or can help to assist the user with a database or spreadsheet program. It is also designed to allow the user to change the number and function key sizes and background settings in order to accommodate various users

Bigbell Basic & Bigbell Xl

BigBell Basic and BigBell XL are accessible doorbells designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. This wireless doorbell features an oversized touch pad button marked with the universal access symbol and is designed to enable individuals with disabilities to summon entry assistance when a powered door operator is not available. BigBell has a range of 100 feet from touch button to receiver. BigBell XL has a range of 600 feet, and als

Bigbib

The BigBIB is a bib designed to protect clothing from spills for individuals with arthritis or eating disabilities. The bib is made of sturdy cotton/poly terry with a vinyl waterproof backing to prevent spills from soaking through. The custom- designed shape features shoulder level, Velcro front closure. The neck size is adjustable to fit all individuals. The bib is easy to put on and remove even over bulky clothes. All bibs are machine washable and dryer safe. SIZES: Original and Junior. DIMENS

Bigtrack Trackball & Switch Adapted Bigtrack Trackball

The BIGtrack Trackball is a trackball designed for use by individuals with fine motor, upper extremity, or severe physical disabilities. This trackball has an oversized trackball with left and a right mouse click buttons located behind the trackball to avoid unwanted mouse clicks. The BIGtrack also allows for second mouse connection, enabling both the BIGtrack and a second mouse to be connected for assisted or simultaneous participation. This trackball is also available in a switch-adapted versi

Biomuse

BioMuse is a cursor control interface designed for use by individuals with severe physical or neurological disabilites or spinal cord or brain injury. This bioelectric signal controller is a rack-mountable package that enables users to control computer functions directly from muscle or eye movement or brainwave signals, bypassing standard input hardware, such as a keyboard or mouse. This device receives data from four main sources of electrical activity in the human body: muscles (EMG signals),

Biotens

BioTENS is a Transcutaneous Electrical Nerve Stimulation (TENS) device to be used by individuals with arthritis and severe physical disabilities for the symptomatic relief and management of chronic (long term) intractable pain and as an adjunctive treatment in the management of post surgical and post traumatic acute pain problems. BioTENS has adjustable pulse amplitude, rate, and width. POWER: 9 volt battery (alkaline, or nickel-cadmium rechargeable.) DIMENSIONS (HxLxW): 91 x 64 x 23 mm. WEIGHT:

Birthday Party Cake Kit (Model 1202)

The Birthday Party Cake Kit, model 1202, is an educational toy designed for use with children with cognitive or severe physical disabilities. This kit features cake slices with candles numbered one through five for counting. As each cake piece is put in to place, a red light shines on the center candle. When all slices are in place, multi-colored lights blink and "Happy Birthday" (sung by children) plays. The kit includes a five-piece cake, five numbered candles, five plates, a play camera, thre

Bite Switch

The Bite Switch is a sensitive bite switch designed for use by individuals with severe physical or neurological disabilities, spinal cord injury, or cerebral palsy. The bite switch is an alternative to sip & puff switches for ventilator users and individuals with respiratory disabilities. The user holds the switch between lips or teeth and presses gently to activate. OPTIONS: Dual bite switch mounts requiring 1-inch side-to-side head movement. COLOR: Black with red bite area.

Bite Trigger (Model BT100)

The Bite Trigger, model BT100, is a trigger activator designed for use by people with fine motor, neuromuscular, or upper extremity disabilities, or arthritis or spinal cord injury. Intended for use by individuals whose disabilities prevent them from pulling the trigger on a firearm, the unit has two components: A mechanical activator that mounts inside the trigger guard with mounting screws, and a mouthpiece with a bite switch that attaches to the stock of the gun with a Velcro strap. The user

Black Hawk Chief (Model 107-Zrx)

The Black Hawk Chief, model 107-ZRX, is a powered stand up wheelchair designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. The system allows variable blendability of all positions, and compensates mechanically for body position by moving armrests and positioning devices such as lateral supports. FRAME (LxW): 38 x 23 inch frame. Ground clearance is 4 inches without anti-tipper wheels; turning radius is 29 inches. Custom sizing is available for indiv

Black Trays

The Black trays are wheelchair lap trays designed for use by individuals who use wheelchairs. These PVC trays are equipped with attached rims and are difficult to crack. SIZES: Infant, child, and adult sizes. COLOR: Black.

Blazer With Belt (Model 011)

Blazer with Gathers and Belt, model 012, is a women’s jacket designed for use by individuals with mobility or severe physical disabilities and spinal cord injury. This tailored blazer with gathered detailing features four front buttons and a zipper in the high back and sleeves for ease in dressing. The back is available in high or regular length and belt loops are available at the back hem of the longer length, upon request, to aid in dressing and to help the wearer to easily pull down the fabri

Blazer With Gathers And Belt (Model 012)

Blazer with Gathers and Belt, model 012, is a women’s blazer designed for use by individuals with mobility or severe physical disabilities and spinal cord injury. This tailored blazer with gathered detailing features four front buttons with a zipper in high back and sleeves for ease in dressing. The back is available in high or regular length and belt loops are available at back hem of longer length, upon request, for aid in dressing and to help the wearer to easily pull down the fabric at back.

Blow Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Switch activated by blowing on an index card attached to a battery device, intended to help a child develop breath control and blowing skills. This switch is made with a metal bandaid box, 3/16 inch wood dowel, two large paper clips, 12 inches of 24 gauge stranded wire, four inches of 2 conductor 22 gauge stranded wire and two index cards. Provides instructions and diagrams on cutting slots and holes in the box, soldering wire to the paper clips, and a

Blue Flash

The Blue Flash is a carrying aid for communicators designed for use by individuals with communication and mobility disabilities. Pushed like a walker or a stroller, this mobile carrier accommodates communicators and portable computers and features a platform with a trap-in system for securing the device, two front caster-style wheels and two large rear wheels, and a push handle. The height-adjustable carrier collapses for storage and includes a detachable basket under the device platform.

Bobath Extra Wide Hydraulic Therapy Couch

The Bobath Extra Wide Hydraulic Therapy Couch is designed for use by therapists working with children with various neurological impairments such as cerebral palsy. It can accommodate both the therapist and child on the couch. Bobath Therapy Couches can be used in clinics, hospitals and medical centers offering Bobath therapy. It is available in both electric and hydraulic versions. POWER: Examples: Hydraulic. DIMENSIONS: Maximum couch height: 1000 millimeters (39 inches), Minimum couch height:

Boccia Ball Ramp

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair and has only limited use of one arm to play boccia ball. The top of the ramp rests on the arms of the user's wheelchair and extends to the floor. To adjust the length of the run, a variable set of legs allow an assistant to raise the lower end of the ramp to various heights as directed by the player. The higher the ramp is raised, the shorter the run. At the top of the ramp, an adjustable support can be placed in var

Boccia Ball Ramp 2

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair and has only head movement to play boccia ball. The top of the ramp rests on the arms of the user's wheelchair and extends to the floor. To adjust the length of the run, a variable set of legs allow an assistant to raise the lower end of the ramp to various heights as directed by the player. The higher the ramp is raised, the shorter the run. At the top of the ramp, an adjustable support can be placed in various posi

Boccia Ball Ramp 3

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair and has limited movement to play boccia ball. The top of the ramp rests on the arms of the user's wheelchair and extends to the floor. The top of the ramp is on a swivel, enabling the user to turn the ramps to aim. To adjust the length of the run, the user changes the ball release position on the ramp. TITLE: The Boccia Ball Ramp 3. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/ramp4.htm.

Body Support Wedge (Model 9Ffbw)

The Body Support Wedge, model 9FFBW, is a positioning wedge designed for use with children with severe physical or neurological disabilities. This covered foam wedge provides full body support at 15 degrees. DIMENSIONS (HxWxL): 12.5 x 36 x 42 inches.

Bolster Chairs (Models B3, B3C, B3Ccs, B4, B4C, & B4Ccs)

Bolster Chairs, models B3 through B4CCS, are adjustable chairs with attached desks for children with neurological or severe physical disabilities up to 48 inches tall. The B3 Series is intended for children two to six years of age up to 42 inches tall. The B4 Series is designed for children five to eleven years old up to 48 inches tall. FEATURES: Models B3CCS and B4CCS have casters, an anterior support, and adjustable lateral supports. Models B3C and B4C have 4-inch swivel locking casters. Stand

Bolsters And Stands (Models Ap142, 1421, & 1422)

The Bolsters and Stands are therapy rolls designed for use in therapy to develop balance and posture control in infants and children with neurological and physical disabilities. The bolsters have a washable vinyl exterior over a foam-covered core with carrying straps at each end. The adjustable wooden stands support and elevate the bolsters and can be used as small benches. DIMENSIONS (Diam.xL): Bolsters are 4 x 25 inches (model AP142), 8.5 x 43 inches (model 1421), and 10 x 50 inches(model 14

Bongo Drums (Model 756)

The Bongo Drums, model 756, is a switch adapted musical instrument designed for use by individuals with upper extremity or severe physical disabilities. High-quality, tunable wooden bongos are attached to a base fitted with a drumstick on each side. When two connected capability switches (required but not included) are activated, the drums are played. A tuning key is included. POWER: Uses 4 D batteries. DIMENSIONS (LxWxH): 18 x 12 x 11.5 inches. WEIGHT: 7.75 pounds.

Book Mate Adjustable (Model 73240)

The Book Mate Adjustable is a stand with a bookholder designed to hold books or magazines in an open position for patients sitting in bed or in an easy chair. It may also be used in the kitchen for holding recipes or elsewhere for holding musical scores or reference notes for lectures. The stand is made of aluminum tubing with side legs that fold for transport or storage. The attached clear acrylic plastic bookholder is angle adjustable to any angle, height adjustable from 16 to 17.5 inches, and

Book Rest

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Easel-like book rest to hold books at a convenient angle for reading. Describes construction of a book rest made of hardboard or plywood, 8 by 10 inches, and hardwood strips for the fiddle on which the book rests. The support is attached with a dowel so it can be made to lie flat against the plywood to carry or store the device. Includes diagram and photographs. COMMENTS: Can be used with page restrainers (000373) to hold paperback books open. SKILLS R

Book Rest.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Book rest made to the angle preferred by the reader. Provides list of materials needed, instructions and diagram for building a simple book rest of wood. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Elderly People REF: London, England: Souvenir Press: p 86-87. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC CALL NUMBER: R3460 PAGES (including cover): 3 1985.

Bookease Reading Stands

Bookease Reading Stands are bookholders designed for use by individuals with upper extremity disabilities or arthritis. Available in mini, classic, or luxury models, these holders accommodate most reading material. Pages are held in place with unobtrusive pegs, which extend outwards for extra-thick books. The wooden unit folds flat when not in use. DIMENSIONS (WxHxD): The mini model is 5 x 5.75 x 0.75 inches. The classic model is 6.333 x 9.5 x 1.25 inches. The luxury model is 9.75 x 12.5 x 1.25

Booklift Copyholder (Model 4065)

The Booklift Copyholder, Model 4065, is a portable, folding overhead bookholder designed for use by people with upper extremity disabilities. The device folds completely flat consists of a clear plexiglass bookrest on telescoping legs to allow the book to be placed at the most comfortable angle for the user. The holder has nine height adjustments and two adjustable clips. DIMENSIONS (WxHxD): 11.75 x 9.38 x 1.75 inches with a 1.5-inch lip when open.

Bookworm

The AbleNet Bookworm Literacy Tool is a voice output reading machine designed for use by children with cognitive, severe physical, or vision disabilities. To use the unit, which works with most books and worksheets, the reading material is clipped to the BookWorm unit and the book is adapted with the included stickers and page detectors. Each page is recorded on the included memory module. Reading is activated by pressing the activation area or using the attached single switch (switch not includ

Boppy

Boppy is a body positioner designed to provide support for infants in a prone or suppine position and to provide support while sitting for young children.The C-shaped padded, cushion style support features an opening to cradle an infant or to fit around a child's hips. Two of these cushions may be stacked for support while sitting. OPTIONS: Cotton slipcover. COLOR: The pillow is white. The slipcover is available in blue with bees or pistachio dots.

Boppy Bibs

Boppy Bibs are designed for children with upper extremity and eating disabilities. These absorbent cotton bibs provide extra wide coverage and feature Velcro closure at the neck. COLOR: Assorted bright patterns.

Boss Hd Equalizer Bariatric Tilt System

The BOSS HD Equalizer Tilt System is a powered tilt-in-space system designed for use by individuals with mobility, neurological or severe physical disabilities. This tilt-in-space system is designed to be mounted on a heavy-duty power wheelchair base (not included) such as the PaceSaver BOSS 6 powered wheelchair (see separate entry). CONTROLS: Integrated programmable Shark joystick controller. A swing-away controller mount and attendant control are optional. SEAT (DxW): (18 to 26) x (22 to 30) i

Bottom Buddy Toilet Tissue Holder

The Bottom Buddy Toilet Tissue Holder is a toileting aid designed for use by individuals with grasping, neurological, reaching, or upper extremity disabilities or spinal cord injury. This device has a curved handle and a rounded head. The soft, flexible head has three tulip-petal sections that pull back to allow the user to insert and grip any toilet paper or pre-moistened wipe securely. Once inserted, the toilet tissue covers the rounded head and the user does not need to touch it again. A pres

Bounder, Bounder Plus, & Big Bounder Manual Gurney

The Bounder, Bounder Plus, and Big Bounder Manual Gurneys are manual stretcher wheelchairs designed for use by individuals with severe physical disabilities or spinal cord injury. FRAME: Black powder-coated tube frame with reinforced side and end rail mounts, made using all steel TIG welded box frame construction. Options include frame reinforcements; side and end rails; drink holder; frame colors other than black and upholstery; sliding drawer at front of gurney; storage tray located approximat

Bounder, Bounder Plus, & Big Bounder Power Gurney

The Bounder, Bounder Plus, and Big Bounder Power Gurneys are powered stretchers designed for use by individuals with severe physical disabilities or spinal cord injury. FRAME: Black powder- coated steel tube frame with reinforced side and end rail mounts, made using TIG welded box frame construction. CONTROLS: UE1D electronics featuring six programs with a bi-directional select switch and electric brake controls. Options include a programmer for electronics; attendant controls; custom hand contr

Bowling Ramp

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a powered wheelchair and has limited movement to bowl. The ramp shown is made of strong light tubular steel. The height is set to just clear the wheelchair armrests and controls. The horizontal portion of the ramp at the top is very slightly past the horizontal so the ball stays there until gently pushed forward. To maximize speed, the upper portion of the ramp is straight and the lower half has a gentle curve to the horizontal.

Box Bed

The Box Bed is designed for children and adults with respiratory or other illnesses that may require a positional tilt during rest.  The compact size and efficient raising and lowering system make it suitable for use within a home, hospital or nursing environment.  The electric raising and lowering system ensures less strain on the parent or caregiver. The bed may be fixed at any desired height.

Bracelet Assistant

This Bracelet Assistant is designed for those individuals who have a debilitating condition that affects their fine motor skills and/or use of their hands. Also would benefit individuals with poor dexterity, perhaps those who have arthritis. Portable and small. Users have aided support while putting bracelets or necklaces on with this tool as it acts as an extra hand, holding one end of the bracelet or necklace.

Bracket To Hold Power Packs For Wheelchairs

CUSTOM ADAPTATION PURPOSE: To enable a controller for a power assist for a manual wheelchair to be attached to wheelchair push handles. The power assist units are suspended under the wheelchair seat and the controllers are attached to the wheelchair push handles with the included full-circle Bakelite clamp for access by caregivers.When the clamp did not fit over the rubber handgrips, a split metal clamp was designed. The top lock was macined of aluminum and threaded for bolts. The bottom was ma

Brain Interface Glasses Eye Tracking System

---- PROTOTYPE --------- PURPOSE: To design a prototype of a brain controlled interface pair of glasses that can be used by individuals with severe mobility disabilities and neurological disorders to control a computer. The glasses were created from off-the-shelf materials by PhD student William Abbott and Dr. Aldo Faisal, a lecturer in neurotechnology at Imperial College in the United Kingdom. The system has two basic components: (1) an eye tracking system that an individual wears on his or her

Brain Interface Steering System For Wheelchair

PROTOTYPEPURPOSE: To develop a hands-free wheelchair steering system through brain wave activity for persons with limited mobility. Toyota, in collaboration with other researchers in Japan, has developed one of the fastest systems for analyzing brain waves. This new technology requires only 125 milliseconds (125 thousandths of a second) to read brain waves. An individual uses the prototype system by placing a cap on his or her head that reads brain signals through an electroencephalograph (EEG)

Brass Tone Canopy Crib

The Round Brass Crib is a circle bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this brass crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has clear brass rope spindles, drop-side access, and a fluted dome assembly and includes a high-density foam mattress. OPTIONS: Bedding and linens watterproof p

Brief Or New: Feeding Device For Finger Foods.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device promotes independent self-feeding by spinal cord injured persons. A cylinder is constructed of a rectangular piece of polyform splinting material measuring 13 by 4 cm. A polyform strip is attached to the side of the cylinder to hold the hand in place while eating. Feeding device was originally designed for a person with syringomyelia. Includes illustrations. SKILLS REQUIRED: Assembly. AUTHOR: Wiener, M M TITLE: Brief or New: Feeding Device for F

Bright Box

The Bright Box is a touch switch designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury and low vision. This switch has a large-display visual cue that is activated when the user presses the top surface of the switch. The switch can be used to activate communication devices, mouse interfaces, or switch-adapted toys with standard 1/8-inch jacks. The visual display can be used as a visual cue to aid in locating the device for persons with low vis

Bright Box Tactile

The Bright Box Tactile is a touch switch designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury and low vision. This switch has a large-display visual cue and tactile feedback that are activated when the user presses the top surface of the switch. The visual feedback and tactile feedback (vibration like that of a cell phone or pager) can be employed together or independently. The switch can be used to activate communication devices, mouse inter

Bright Red Switch, The (Model 262)

The Bright Red Switch, model 262, is a touch switch designed for use by individuals with upper extremity disabilities. Pressing gently on the surface of the switch rewards the user with lights and vibration. Plugging the switch into a switch-adapted toy or appliance causes the device to be activated when the switch surface is pressed.

Brookfield

The Brookfield is designed for children 2 years and older who require moderate levels of postural support when seated. It can be used in daycare, school and home environments. The Brookfield has a molded back, which promotes central alignment and gives additional support while the child is seated. Its seat height and depth can also be adjusted. As an additional feature, the back can be adjusted in height. The Brookfield comes complete with a molded back, contoured seat, pelvic strap and heigh

Bruno Electra-Ride Elite

The Bruno Electra-Ride Elite is a straight rail interior seat lift designed for use by individuals with mobility disabilities and cognitive disabilities. The Electra-Ride has a 45- and 90-degree locking swivel seat at the top and the bottom of the stairway. The height-adjustable seat is equipped with an adjustable footplate with a safety sensor, flip up arm rests, and a retractable seatbelt. This lift can be installed on either side of the stairway, to within five inches of the wall. POWER: Us

Bruno Electra-Ride Ii (Model Sre-1550)

The Bruno Electra-Ride II is a straight rail interior seat lift designed for individuals with mobility disabilities and cognitive disabilities. The Electra-Ride II can be installed on either side of the stairway. There is a final end stop bumper at each end of rail. Adjustable speed control up to 32 feet per minute; actual loaded top speed is 28 feet per minute. SEAT: The seat width adjusts from 16 to 20 inches between the armrests, and the seat depth is 14 inches. The seat rotates, locking at

Bruno Electra-Ride Iii (Model Cre-2110)

The Bruno Electra-Ride III, model CRE-2110, is a custom rail interior seat lift designed for individuals with mobility disabilities and cognitive disabilities. The stairlift rail can be installed as close as 7 inches from the wall. The unit anchors to the steps, not the wall. Tight radius inside turns fit typical bi-level houses. The tight turn and narrow rail will keep the majority of the staircase free of obstruction. The height-adjustable seat swivels and locks at 45 degrees (bottom), 0 degre

Bruno Electra-Ride Lt (Model Sre-2700)

The Bruno Electra-Ride LT, model SRE-2700, is a straight rail interior seat lift designed for use by individuals with mobility disabilities and cognitive disabilities. The LT has a rack and pinion drive system will sense and automatically stop when obstacles are encountered. The seat and arms of the carriage flip up out of the way when the unit is not in use. The swivel seat locks for getting on or off. The rocker switch control is conveniently located at the end of the arm rest. The two wireles

Bruno Turning Automotive Seating (Tas) 2500 Turny

The Bruno Turning Automotive Seating (TAS) 2500 Turny is a powered turning automotive seat base designed for use by individuals with severe physical disabilities and mobility disabilities who have difficulty entering and exiting minivans, pickup trucks, and full-size vans. The Turny replaces the existing seat base with a swivel, power up and down base. It allows for an even height transfer from a mobility device or can be lowered to 12 or 16 inches. The base swivels manually. The hand control fi

Bruno Turnout Turning Automotive Seating (Model Tas-2400/2400E)

The Bruno Turnout Turning Automotive Seating, model TAS-2400/2400E, is a swivel base designed for use by individuals with mobility disabilities who have difficulty getting in and out of a car or minivan. The unit is installed on a vehicle-specific custom base plate assembly and is available in a manual (TAS-2400) or powered (TAS-2400E) model. The seat rotates out over the doorsill, bridging the gap for a safe transfer onto the seat. Once the user is on the seat, it rotates back into the vehicle.

Btx Tubular Motor (Tumo) Xcel Drapery System

The BTX Tubular Motor (Tumo) Xcel Drapery System is a powered drapery control system designed for use by individuals with severe physical or neurological disabilities. This plug-and-play automation system has a built-in radio receiver, an electronic controller, and a direct current (DC) motor capable of pulling up to 60 pounds of drapery fabric (120 pounds for tandem drive). The integrated radio allows for up to six systems or six groups of systems to be controlled by one remote. The electronic

Bubble Blowers (Models 4535, 4537, & 4539)

The Bubble Blowers, model 4535, 4539 and 4537, are switch-activated toys designed for use by children with upper extremity or severe physical disabilities or spinal cord injury. Activate an attached capability switch (not included) and thousands of bubbles are blown by familiar characters. Model 4535 is Dora the Explorer and her friend Diego and model 4539 is sponge Bob. Model 4537 (shown)is Ni Hao and Kai Lan. Included are a special character bubble wand and four ounces of bubble solution. Thes

Bubble Horn

The Bubble Horn is a respiratory training activity designed for use with children with breathing, speech, or oral motor disabilities. This large, colorful, horn-shaped toy is equipped with multiple bubble wands, encouraging breathing control and oral motor activities. A dipping tray and 2 ounces of bubbles are included.

Bubble Tube Cuddle Cushion

Bubble Tube Cuddle Cushion is a wrap-around cushion that offers up-close relaxation for children with autism, emotional disabilities and sensory processing disorders. It is a large beanbag cushion that wraps around Bubble Tubes for up-close appreciation of vibrations, colored bubbles and sounds. The Bubble Tube Cuddle Cushion is upholstered in tough, washable white vinyl upholstery. Bubble tube not included.

Bubbles

Bubbles is a combination touch switch and motion detection switch designed for use by individuals with upper extremity disabilities. This dome-shaped switch can be used to operate any switch-adapted device and features adjustable sensitivity. The switch can be set to act as a touch-sensitive switch, activated by a light touch on the top or sides, or it can be set so that simply bringing the hand near the switch is sufficient for activation. DIMENSIONS: Three inches across.

Buckingham Showereasy

The Buckingham Showereasy is a shower aid designed for use by individuals with upper extremity and severe physical disabilities. The showereasy is a shower arm device that complements the use of bath and shower boards, allowing hands-free showering and washing by the user. In use, the shower arm can be moved into three different directions, either directly upright or with a gentle push it can be moved to the left or right until it clicks into a particular position.

Buddy Button Switches

Buddy Buttons are touch switches designed designed to provide computer accessibility or to activate toys and appliances for children who have physical and/or visual disabilities. These single switches are activated by pressing anywhere on the top surface: the force to activate around the edges, 3.5 ounces, almost half the force required in the center, 7.5 ounces. Two threaded inserts on the bottom of the switch to allow for secure mounting on the TASH Mighty Mount (see separate entry) or other m

Bumbo Baby Sitter

The Bumbo Baby Sitter is a positioning chair designed for use by infants between the ages of 3 to 14 months who have neurological or physical disabilities or cerebral palsy. This chair is constructed so that the baby's own body weight helps to gently keep them in place and in an upright sitting position. The chair is made of low-density polyurethane. It is also latex free, hygienic, and designed to be easy to clean. OPTIONS: Attachable tray. COLOR: Assorted.

Bunk Bed Feeder Mount

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted feeder mount for a Kangaroo Pump feeder to a bunk bed for a child with Edwards Syndrome. There was no room for the feeder to be placed at the head of the bed; therefore, it was suggested that the child’s sleeping position be reversed. Despite the change in sleeping position the feeder could not be fixed directly onto the rails as they were too close together. A new bracket was added which holds the feeder just out from the

Bunk Bed Ladder Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized bunk bed ladder for a child with Edwards Syndrome. To protect the child from injury the bottom three rungs of the bunk bed ladder needed to be screened off by putting mesh on the inside. However, this would make the child’s sister unable to use the ladder rungs safely to climb into the top bunk. A new rung unit was created which completely covers the bottom three existing rungs. The new rung unit has mesh fabric on the inside,

Bunk Bed Rails

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create customized bunk bed rails for a child with Edwards Syndrome. A side rail for the bunk was created using a steel tube frame padded with foam and covered in strong white mesh fabric and held in place by canoe clips. The rail is mounted on two brackets which fit over the frame of the bunk base, and can be easily lifted in and out of the bed. This adaptation is strong enough to avoid damage to the frame and safe for the child should she bang ag

Burgess Joystick Controller.

A line of joystick assemblies which can be used to build interfaces for handicapped persons. 2 or 4 switch version. Momentary or latching. Optional lift to operate can be added. Dimensions: 3 inches square by 1. 6 inches deep. Control shaft 2 inches high.

Busy Gear (Model 952)

The Busy Box, model 952, is a sensory busy box designed to provide visual and auditory stimulation for children with sensory, cognitive, or physical disabilities. Connect a capability switch (required but not included) and the brightly colored gears play music and entertain with a light show. The gears are interchangeable, enabling users to create their own designs. POWER: Uses 3 double-A batteries. DIMENSIONS (LxW): 12 x 12 inches.

Butterfly (Model 148)

The Butterfly, model 148, is a switch-operated toy designed for use by children with severe physical or upper extremity disabilities. Pressing an attached capability switch (not included) causes multi-colored lights to flash while children's music plays. POWER: Uses 2 AA batteries. DIMENSIONS (HxLxW): 2 x 5.25 x 4.5 inches. WEIGHT: 0.5 pounds.

Butterfly Spinner (Model 403)

The Butterfly Spinner, model 403, is a switch-operated toy designed for use by children with severe physical or upper extremity disabilities. This traditional toy is activated by pressing an attached capability switch (not included) to create a swirling blend of colors and music while butterflies and ladybugs spin around. POWER: Uses 4 AA batteries. DIMENSIONS (LxWxH): 8.25 x 8.25 x 11 inches. WEIGHT: 2 pounds.

Button Click Switch (Model 775)

The Button Click Switch, model 775, is a touch switch designed for use by individuals with upper extremity, fine motor, or neurological disabilities. This switch comnsists of a shallow square base with a large, round switch surface that activates with 40 grams of pressure. The unit is equipped with a quarter-inch plug. DIMENSIONS (LxW): 2.5 x 2.5 inches. COLOR: The base is blue and the button comes in a choice of blue, red, yellow, or white.

Buttoneer

Buttoneer is a sewing aid designed for use by individuals with fine motor, upper extremity and grasping disabilities, arthritis, low vision or amputation. This lightweight device fastens buttons and makes minor sewing repairs using fasteners, The device is operated with a gentle squeeze; no threading is necessary. The nearly invisible fasteners won't unravel and are washer, dryer, dry cleaning, and ironing safe. The set includes one Buttoneer with Needle Guard, 50 fasteners, 10 buttons, and ins

C-Dock

The C-Dock is a wheelchair securement system designed for use by individuals with mobility disabilities or spinal cord injury traveling in vans. This one-piece floor bracket makes the system service friendly. It is equipped with a stainless steel top plate that attaches to the docking unit, providing sturdy protection and stay-open-jaws that provide unlimited exit time. Other features include jam-free latch parts and intuitive interfaces to keep users informed and in control. This device attach

C400 Vs Junior

The C400 VS Junior is a powered stand up wheelchair designed for use by children with lower extremity, mobility, or severe physical disabilities or spinal cord injury. The C400 VS Jr. has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (LxW): 40.5 x 24 inches. Rigid frame with push handles and a power standing unit designed into the

C500 Vs

The C500 VS is a powered stand up wheelchair designed for use by adults with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This powered chair has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (LxW): 38 x 28.5 to 25.75 inches. Rigid frame with push handles and a power standing unit designed into t

Call Bell (Model 34500)

The Call Bell, model 34500, is a call signal designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This device that sends out a tone when activated by a single switch connected to the jack on the Call Bell. Momentary contact triggers one tone of pre-determined length. Volume can be increased with the addition of a nine-volt battery. DIMENSIONS: 4 x 2 x 1 inches. WEIGHT: 8 ounces.

Call Buzzer

The Call Buzzer is a call signal designed to gain caregiver attention for individuals with disabilities who need to summon assistance. Depressing the plate on the top of the device causes a buzzer to sound. The device has a bright plate on a dark base for contrast to assist individuals with visual disabilities. POWER: Uses two double-A batteries. DIMENSIONS: 5 x 8 inches.

Call-For-Assistance

Call-For-Assistance produces either auditory or visual output as a signal for assistance. Call-For-Assistance requires .17 grams of force for activation, or may be activated by use of a switch. The device can be mounted to a wheelchair. The price of Call-For-Assistance ranges from $40 to $60, depending on the size, type of activation, and type of output desired--features that need to be specified when ordering. POWER: 9 volt battery. DIMENSIONS: 4.75 x 2.5 x 1.063 inches.

Cameleon

The Cameleon is a voice output communication aid and environmental control unit designed for use by individuals with communication or speech disabilities. This dynamic communication aid provides synthesized speech from simple messages to complex sentences, using symbols, text, or both. It has a large, bright screen that can display symbols from a range of communication libraries and languages, as well as pictures from digital cameras and other sources. Input options include a mouse, keyboard, sw

Camera Holder 2

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with limited of the hands or of only one hand to use a camera. This device consists of a a clipless bicycle pedal fitted to a frame that loops over the user's shoulders. Two cleats are fitted to a bracket on the camera to enable the photographer to switch from portrait to landscape orientation, and the pedal clamps are adjustable for strength to accommodate a heavy or a light camera. The pedal can be tilted up and down to adjust the camer

Camera Mouse

Camera Mouse is a mouse emulator program designed for use by individuals with severe physical or neurological disabilities, cerebral palsy, spinal cord injury, or upper extremity amputation. This program allows the user to control the mouse pointer on a computer through head movement. To use the software, a USB video camera (webcam) is connected to the computer, with the camera placed on the monitor and focused at the user. The user's moving image appears in the Camera Mouse window. A mouse clic

Camharness (Model 1086)

The CamHarness, model 1086, is a school bus seat restraint designed for use by children with cerebral palsy or severe physical disabilities. This portalble harness-style restraint secures around a bus seat equipped with standard lap-belts (not included). The lap-belt threads through the loops on the harness to secure the passenger. Up to three passengers can fit on a single seat. A chest clip is included. CAPACITY: 30 to 80 pounds.

Candy Bands (Model 720 To 722)

Candy Bands are elbow, arm, or shin protectors designed for use by individuals with mobility or severe physical disabilities. These Tootsie-Roll-shaped terry tubes have a slender ribbed end and a wider ribbed end for the elbow area. They slide on and off and are machine washable. These multi-use terry protectors warm forearms, cushion elbows or shins, or absorb chin wetness. SIZES: Child (model 720), adult (model 721), and extra-large (model 722). DIMENSIONS The child size is 7 inches long and 1

Candy Corn Proximity Sensory Switch

Candy Corn Proximity Sensor Switch is a highly sensitive switch designed for use by individuals with neurological or severe physical disabilities such as cerebral palsy and spinal cord injuries. This mechanical switch does not require physical touch to activate. The user can wave their hand or another portion of their body within 10 millimeters of the switch to activate. Visual and auditory cues occur when the switch is activated. Orange lights activate for visual cues and a beeping sound is eli

Canning Lid Switch With Light.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Light can be turned on with the light pressure of hand on the jar lid. Simple switch to teach cause and effect. Device is constructed from mayonnaise jar lid that is regular mason size, wide mouth canning jar ring, spring from inside a large curler, plastic pill bottle with snap lid, 3 pieces of plastic coated wire, sturdy box turned upside down, 9 volt light bulb with socket, 9 volt battery, and 9 volt snap battery holder. COMMENTS: Good for visually

Cap Switch (Model 58060)

The Cap Switch, model 58060, is a small buttonswitch designed for use by individuals with upper extremity disabilities who have good ability to target smaller surfaces. The small, round single switch is activated using nine ounces of pressure and provides auditory feedback upon activation. The rubber base prevents slipping. DIMENSIONS: 1.8 x 0.6 inches high. WEIGHT: 6 ounces.

Car & Panda Switch (Models 9031 & 9032)

The Car Switch, model 9031 & 9032, is a touch switch designed for use by children with upper extremity or severe physical disabilities. These child-friendly switches have a contoured design for comfort while in use. Pressing the front hood of the toy car, model 9031, activates the switch; pressing on either of the panda’s ears, model 9032, will activate its smiling face. DIMENSIONS (LxW): (car switch) 4 x 2.5 inches; (panda switch) 3.5 x 2 inches.

Care-Give-R-Lift Bed Sled

The Care-Give-R-Lift Bed Sled is a turning aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Designed for repositioning a person in a bed or recliner the device is made of cotton canvas with heavy nylon webbing handles across the width at two locations. A removable bed pad or terry cloth pad can also be placed on the device for comfort. The unit is hand- or machine-washable in warm water and should be air dried. DIMENSIONS(LxW): 40 x 30 in

Care-Give-R-Lift Skid Seat ( Perforated Suede Vinly)

The Care-Give-R-Lift Skid Seat (Perforated Suede Vinyl) is a transfer aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Used for repositioning an individual into a seated position in a wheelchair or other chair with little or no strain on the caregiver, the device is designed for use with a gel cushion and is made of perforated suede vinyl backed with non-slip fabric. Perforations allow air circulation. The suede surface is soft to the to

Care-Give-R-Lift Skid Seat (Canvas) (Models A & B)

The Care-Give-R-Lift Skid Seat (Canvas) is a transfer aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Used for repositioning an individual into a seated position in a wheelchair or other chair with little or no strain on the caregiver, the device is made of cotton canvas. A snap-close tether stap holds the seat on the chair while the individual is being seated. The device can be hand washed and air dried. Model A has full loop handles s

Careassist Es Bed

The CareAssist ES Bed is a motorized bed designed for use by individuals with severe physical disabilities. This adjustable electric hospital bed includes siderails, dual-locking brake casters with audible alarm, and integrated bed extenders for adding length to the bed. The bed moves in and out of a chair position for dining with a one-button control. Large button caregiver controls are located in one central location at the point-of-care, along with an angle of bed indicator and customizable a

Carebag Bedpan Liner

The CareBag Bedpan Liner is a bedpan pad and liner designed for use by individuals with severe physical or mobility disabilities or spinal cord injury and their caregivers. Designed to safely collect, transport and dispose of body fluids after bedpan use, the polyethylene liner has double soldered seams and a pull tie closure, and comes with an absorbent GelMax pad that converts liquids to gel. The pad can absorb up to 16 ounces of organic liquids, eliminating spillage, odor and the spread of pa

Carebag Men’s Urinal

The CareBag Men’s Urinal is a disposable urinal designed for use by males with mobility, lower extremity or severe physical disabilities or spinal cord injury. Designed to safely collect, transport, and dispose of bodily fluids, this polyethylene bag has a double soldered seams and a pull tie closure, and comes with an absorbent GelMax pad that converts liquid to gel. The pad absorbs up to 16 ounces of organic liquids, eliminating spillage, splashing, odor, and the risk of contact and spread of

Carebike

The Carebike is a cycle attachment for wheelchairs. The unit comprises an anodized aluminum platform on wheels that attaches to a 21-speed comfort bike. It is designed to offer friends, family members and caregivers the convenience of taking a bike ride while still being close at hand to assist the wheelchair user. The wheelchair fits on the platform with the Carebike attached at the rear, giving the biker complete steering, stopping, and starting control.

Caref GPS Phone Watch

Caref is designed for children with cognitive, physical and mental disabilities. Is a GPS built inside a watch; intended to track location and facilitate contact with the child in case of an emergency. Using an app (My Caref) the watch has the capability to send and receive calls. The GPS assistance tracks locations within 3 meters or ten feet. It is equipped with a SOS button that sends locations and calls the numbers on list (after programing it) that will continue to call until someone answer

Caregiver Call Signal

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with severe phyical disabilities to summon a caregiver. This device was created using a doorbell chime with a remote control. The chime unit is carried by the caregiver and the remote is used by the individual summoning assistance. Because the individual did not have enough finger strength to press the button on the remote, a socket with a long cord was attached to the remote and connected to a large, soft button that was accessibl

Carex Male Urinal

The Carex Male Urinal is a male sheath urinal designed for use by men with mobility disabilities, severe physical disabilities, urinary incontinence, or spinal cord injury. Made of durable plastic, this urinal holds 1000 cubic centimeters with graduated marks to measure output. It is equipped with a cover and easy grip L-shaped handle and can be used in several positions while lying in bed. The unit can be washed with soap and water.

Cargo 16 Wheelchair Pouch

Wheelchair back pouch. Cordura nylon fabric with look of cotton duck. 1, 000 cubic inches inner space. Removable shoulder strap. Full width outer and back pockets. Zipper opening top. Strap loops on pouch slip over wheelchair push handles folds with wheelchair. Specify narrow or regular wheelchairs, 12 to 14 inches wide.

Cargo Pants With Opening Options (Model 122C)

Cargo Pants with Opening Options, model 122C, are men's trouser's designed for wear by individuals with spinal cord injury or severe physical disabilities, or who need assistance in dressing. These pants are made from 65/35 polyester/cotton 7-ounce twill or 100% polyester 5.3-ounce micro-suede. Features include a wider cut and higher rise in the back, elasticized waistband with adjustable cord, and reinforced wrist loops for lifting and dressing. Opening options include Velcro fly, drop front, o

Caring Responders

Caring Responders is an emergency alert system with monitoring service designed for use by seniors or individuals with disabilities who are at risk of incapacitating accidents. It provides a wireless alert system that allows the user to summon help in case of a household accident or emergency by touching a button worn around the neck or wrist or on a belt. Responders will alert family members, neighbors, and emergency services. The system has three key parts: a panic button, a base unit, and a R

Carnival Tube (Model 158)

The Carnival Tube, model 158, is a touch-activated toy designed for use by children with severe physical or cognitive disabilities. A simple swipe at the mounted tube activates lights, music, and vibration. Multi-colored beads and lights cascade through the tube. The unit can also be used as a switch. It has a toggle switch which allows any of the rewards to be turned on or off. POWER: Uses 4 AA batteries. DIMENSIONS (LxWxH): 14 x 6.75 x 4.5 inches. WEIGHT: 1.75 pounds.

Carony Transportation System

Carony is a transport wheelchair base designed for use by individuals with severe physical disabilities or mobility disabilities who have difficulty entering and exiting minivans, pickup trucks, and full-size vans. The system operates in conjunction with a Bruno Turny or Turnout powered seat base. The user glides along a rail from the vehicle seat onto the wheeled base, remaining seated the whole time. A hand control glides the seat out of the vehicle then lowers the seat. The Turny or Turnout p

Carpeted Double Scooter (Model Ap 245)

The Carpeted Double Scooter, model AP 245, is a scooter board designed for use by children with lower extremity, mobility, or neurological disabilities. This scooter board is made of plywood covered with padded carpeting, and has eight ball bearing casters. The double board can be separated into two smaller scooters by releasing a lock hitch. DIMENSIONS (LxW): 32 x 12 inches (double scooter); separate scooters are 16 x 12 inches. The board is 5/8 inches thick. COLOR: Boards are available in asso

Carrie Potty Seat (Models Pc 2771P & Pc 2771J)

The Carrie Potty Seat is a child commode designed to be positioned over a toilet or used as a free-standing unit. The shape of the commode maintains the user's legs in slight flexion and abduction to encourage bowel and bladder functions. Lateral supports and a tray help provide trunk stability. A built-in anti-thrust seat maintains pelvic positioning. The seat is made of Tumble Forms' high-density foam and covered with a flexible coating, making the Potty Seat washable, seamless, impervious to

Carrie Rover Stroller (Models 4642, 4643. 4644, & 4645)

The Carrie Rover Stroller is a seating system on a wheeled base designed to provide freedom and mobility while maintaining therapeutic support for children and small adults with physical disabilities. The removable seat is made of Tumble Forms modular cushions which are covered in a seamless, washable material that is impervious to body fluids and non-toxic. The anti-thrust seat stabilizes the pelvis while the seat back articulates 20 degrees to accommodate abnormal trunk tone. The seat may be u

Carrier Wheelchair

---- PROTOTYPE --------- PURPOSE: To develop a prototype robotic wheelchair which allows individuals with mobility disabilities and wheelchair users greater independence and the capacity to traverse any terrain and situation. Developed as semester project at the University of Applied Arts in the Studio Industrial Design 2 Esslinger (www.creativednaaustria.com). The CARRIER wheelchair’s frame is specifically shaped to maneuver over a commode and adapted with a “trap door” allowing the user to us

Carry All Pouch (Model 976)

The Carry All Pouch, Model 976 is a wheelchair and walker carry-all with four accessible pockets. The pouch is secured with Velcro fasteners over the front of the arm of a wheelchair or a walker bar. DIMENSIONS: 9.5 x 1.25 x 13 inches.

Carry All Pouch For Walker (Model 1116)

The Carry All Pouch for Walker, model 116, is a carrying bag made of blue denim designed to attach to the side of a wheelchair or walker. The pouch has one inside pocket and 3 outside pockets with velcro closures.

Carrying Aids For Wheelchair

CUSTOM ADAPTATION PURPOSE: To enable an individual with quadriplegia to keep essential items at hand while in his wheelchair. Three carrying aids were made and attached the left arm of the wheelchair. The first was a carrying pouch for a cell phone. Made of metal, the pouch is lined with vinyl to protect the phone from damage. The second was a small, flat metal tray to carry the remote control for operating the front door. Also added to the arm was a pocket made of vinyl to carry the hadset for

Carrying Aids For Wheelchairs

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with Friedrich's ataxia to carry staws and plastic bags with her. To ensure straws are available when needed, carry them in a round plastic toothbrush holder fastened with Velcro to the underside of one arm of the wheelchair. To ensure a supply of plastic bags are available for garbage, snacks, or clean-up bags, hooks dog clean-up bags in the dispenser they come in to the wheelchair. MATERIALS: Toothbrush holder, straws, dog clean-up bag

Casbar, The

The Casbar is a wheelchair push handle extension designed to enable a companion or caregiver to push a wheelchair using one hand. The ends of this C-shaped coated steel bar fit over the existing wheelchair push handles and lock in place using two large adjusting knobs to create a single stroller-style handle. On flat surfaces, this device enables the chair to be pushed and controlled with one hand and on inclines and ramps, using two hands makes pushing less difficult than when using the standar

Case Report: The Development Of A Feeding Harness For An Als Patient.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Feeding harness which acts as a pulley, allowing a person with strong elbow extensors but weak flexors to bring a hand to the mouth for self-feeding. Harness made of a thermoplastic form for each shoulder, tubing across the back of the neck, wrist cuffs, and cotton or nylon cord threaded through the tubing to connect the cuffs and allow one arm to pull up the other for feeding. Developed for a patient with amyotrophic lateral sclerosis ( ALS). COMMENTS

Catch-All (Model Wh190)

The Catch-All WH190 is a under seat net pocket designed for individuals who spend long periods in wheelchairs. Designed for use with rigid ad folding wheelchairs, this device securely attaches with Velcro hook and loop to the bottom horizontal and rear vertical frame tubing forming a catch all net shelf under the wheelchair seat. DIMENSIONS: The widths ranges are 10, 11 to 14, 13 to 18, and 17 to 24 inches. COLOR: Black.

Cause And Effect Cinema (Model 501)

Cause and Effect Cinema, model 501, is a simple cause and effect training program designed for use by individuals with cognitive or severe physical disabilities. Age appropriate for older as well as younger populations, this program is made up of 90 film clips covering 10 categories such as animals, musical instruments, vehicles, tools, sports, toys, appliances, etc. Each film clip lasts approximately three to seven seconds. When the switch is pressed the first time, the title of the clip is dis

Cause And Effect Sights And Sounds

Cause and Effect Sights and Sounds is a cause and effect training program designed to teach switch use for children with severe physical disabilities or cognitive disabilities. The program offers five musical themes (mellow, country, jazz, techno, and rock) with three colorful animated activities (flowers, fireworks, and lines and designs). Three separate switch modes teach momentary, timed, and latching switch activation. COMPATIBILITY:For use on IBM and compatible computers or Macintosh comput

Cd Switch (Model 90)

The CD Switch, model 90, is a touch switch designed for use by teens with upper extremity disabilities. This age-appropriate switch has a blank CD-ROM on the surface that refracts light in a rainbow pattern. This low-profile switch requires 40 grams of pressure to activate.

Cd Walkman (Model 342)

The CD Walkman, model 342, is a portable adapted compact disc player designed for use by children and adults with severe physical, neurological, or upper extremity disabilities or spinal cord injury. Pushing a connected switch (not included) causes the CD to play; pushing the switch again turns the CD player off. This player is equipped with DBBS (dynamic base boost system), an AM/FM radio (the radio function is not switch-adapted) and a strong polycarbonate body. POWER: Uses two double-A batt

Ceye Eye Control Module

The CEye Eye Control Module is an eye controlled input system designed for use by individuals with severe physical, neurological, or upper extremity disabilities, spinal cord injury, or upper extremity amputation. This unit enables the user to control the mouse by looking at a screen and dwelling (staring at the screen for a certain length of time) to select and blinking to click. Users place themselves in front of the screen for a one-time calibration, after which the system is fully automatic.

Chair 4 Life

---- PROTOTYPE --------- PURPOSE: To create a prototype of a modular wheelchair that "grows" with the user allowing for independence over the lifespan. Through the United Kingdom's National Health Service, the Renfrew Group developed a new type of powered wheelchair with the Department of Health, as part of the Department's Innovation Health and Wealth program. Renfrew won a government contract to design a chair which maximizes the mobility and independence of children with disabilities as they

Chair Insert

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted chair insert for a child with global developmental delay and epilepsy. The child had outgrown his previous insert and a new version was required. The new insert has a plywood back set at a 10-degree recline, a plywood base and footrest, height-adjustable thoracic fins, and cushions made from fabric-covered, 25-millimeter foam. There are also a range of harness mounting points, and the child uses the chair with a waist harne

Chair Which Provides Support

CUSTOM ADAPTATION PURPOSE: To enable a child to play in a sandbox. A large plastic bucket in which pickles were delivered to a fast food restaurant was washed numerous times to remove the pickle odor and was then cut to form a seat with a high back and sides. The front half was cut away in the shape of a "W," with the front indentations supporting and positioning the child's legs. The cut edges were covered with rubber padding and the seat was fixed to a circular wooden base for stability. A fo

Chairmate Cup Holder/ashtray Holder (Model F70622-0000)

The Chairmate Cup/Ashtray Holder, model F70622-0000, is a wheelchair drink holder designed for use by individuals who use wheelchairs. The unit features a double-well cup holder and a removable ashtray. The deeper well has a pop-out bottom that accommodates most glasses and cups. The unit can be attached vertically or horizontally on the right or left side of any chair, metal frame-bed, or tubular frame wheelchair bar from 1/2 to 1.25 inches in diameter. DIMENSIONS (LxWxD): 7.75 x 6.25 x 1.75 in

Chairries With Tray

The Chairries with Tray are positioning chairs designed for use by children with mobility and physical disabilities. Designed for play, feeding, and classroom activities, these stackable activity chairs are constructed of Baltic birch with rounded edges and corners. Features include a seat belt for secure seating and a detachable tray made of easy to clean vinyl. Six seat heights are available. DIMENSIONS (HxDxW): Size 1 is 5 x 7 x 11.75 inches. Size 2 is 7 x 7 x 11.75 inches. Size 3 is 9 x 7

Champ Dog (Model 967)

The Champ Dog, model 967, is a switch operated toy designed for use by children with severe physical disabilities, mobility, or upper extremity disabilities. When the capability switch (not included) is activated, this plush dog walks, wags its tail, sits on its hind legs and raises its paws and barks. POWER: Uses two C batteries (not included). DIMENSIONS (LxWxH): 11 x 4 x 8 inches.

Chart Holder (Model 93)

The Chart Holder, Model 93 is vinyl pouch sewn to the back of the wheelchair upholstery. It may be used for carrying charts and papers. OPTIONS: Identification stencilling is available.

Chatbox 40

ChatBox 40 is a direct selection and scanning communicator designed for use by individuals with communication or speech disabilities. This voice output device speaks pre-recorded messages when the user presses buttons on the adjustable keyboard display. The unit also supports switch scanning options for individuals who are unable to press buttons. The keyboard display supports 10 large keys or 40 standard-sized keys, with ten levels of messages. Single-switch, dual-switch, and joystick scanning

Chatta-Boot

The CHATTA-Boot is an ankle foot orthosis designed to prevent contractures due to immobility. This washable soft splint aids in treatment of plantar flexion contractures and maintains the lower extremity in a functional position. A laundry bag is included. OPTIONS: Regular or large boot liners, abduction bar, and transfer pad. SIZES: Regular (fits calf circumference up to 16 inches) and large (fits calf circumference 16 inches and up).

Chatta-Elbow

The CHATTA-Elbow is an elbow support designed to prevent contractures due to immobility. This splint has a one-piece liner and removable and adjustable indexed hinges. The hinges can be set at a static setting or to allow for a range of motion. A laundry bag and an extra cover are included. SIZES: Small, medium, and large.

Chatta-Grip

The CHATTA-Grip is a hand orthosis designed to prevent contractures due to immobility. This soft splint features a variety of palmar additions to address different degrees of finger flexion and extension. Available for the right or left hand, this washable splint is malleable to accommodate different degrees of wrist flexion/extension. A laundry bag and an extra cover are included. SIZES: Small, medium, and large.

Chatta-Knee

The CHATTA-Knee is a knee orthosis designed to prevent contractures due to immobility. This washable soft splint aids in treatment of non-fixed contractures of the knee. This brace features a one-piece removable liner and adjustaqble indexed hinges. The hinges can be set at a static setting or to allow for a range of motion. A laundry bag is included. SIZES: Small, medium, and large.

Chatta-Rest

The CHATTA-Rest is a hand orthosis designed to prevent contractures due to immobility. This soft splint is a resting hand splint which inhibits flexion of the wrist and fingers . Available for the right or left hand, this washable splint is malleable to provide a custom fit. A laundry bag and an extra cover are included. SIZES: Small, medium, and large.

Cheap Talk 8 Advanced 6-Level Communicators (Models 2391 & 2392)

Cheap Talk 8 Advanced 6-Level Communicators, models 2391 and 2392, are direct selection communicators designed for use by individuals with speech or communication disabilities. These six-level communicators have an easy level changer feature. One message square is dedicated to changing levels. A therapist or teacher records the name of each level and the user simply pushes the level changer icon to hear and select desired level. The unit stores up to 48 6-second messages including the level chan

Cheek Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Sensitive switch that can be activated by slight head movement when mounted or held near child's cheek or chin to operate tape recorder, light, or battery toy. Device is constructed of subminiature SPDT lever switch, earphone with subminiature size plug, large bobby pin, cardboard, glue, tape, and rosin core solder. SKILLS REQUIRED: Soldering. AUTHOR: Burkhart, L J TITLE: Homemade Battery Powered Toys and Educational Devices for Severely Handicapped Ch

Chewnoodle

The Chewnoodle is an oral sensory integration activity intended for use with children with physical or neurological disabilities, sensory processing disorder, and autism. It is designed to help children reduce instances of distraction, stress, anxiety and hyperactivity. The Chewnoodle is made up of a non-toxic silicone tube attached to a light-weight aluminum carabiner. The carabiner can be attached to the user’s clothing or a strap worn over one or both shoulders. The user squeezes or chews on

Chewnoodle Bumpy

The Chewnoodle Bumpy is an oral sensory integration activity intended for use with children with physical or neurological disabilities, sensory processing disorder, and autism. It is designed to help children reduce instances of distraction, stress, anxiety and hyperactivity. The Chewnoodle Bumpy is made up of a non-toxic silicone tube with bumps on the exterior attached to a light-weight aluminum carabiner. The carabiner can be attached to the user’s clothing or a strap worn over one or both sh

Chihuahua (Model 3928)

The Chihuahua, model 3928, is a switch-operated toy designed for use by children with severe physical, mobility, or upper extremity disabilities. When a connected capability switch (not included)is activated, the plush dog walks, barks, and wags its tail. POWER: Uses two double-A batteries (not included). DIMENSIONS (LxWxH): 5.5 x 4 x 6 inches.

Child Head Float

The Child Head Float is a float swimming aid designed for use by children with upper extremity, neurological, or physical disabilities. This device is useful for a swimmer with under-developed reflexes and minimal head and limb control. The float rests on the user's the shoulders and wraps around the neck, holding the head above water. CAPACITY: 40 to 50 pounds

Children's Bodysuit (Model C601)

The Children's Bodysuit, model C601, is designed for use by children with tracheostomies, severe physical disabilities, or incontinence. This garment can be used to protect skin under a brace, to protect an incision, or to keep the child's hands away from a diaper. Features include a snap crotch, a wide cut at the hip and seat to accommodate a diaper, and a scooped neckline that will not interfere with a trach tube. The garment is made of 49 percent polyester/51 percent cotton interlock knit fab

Children's Cargo Pants With Opening Options (Model C122C)

The Children's Cargo Pants with Opening Options, model C122C, are children's pants designed for use by children with cerebral palsy or neurological or severe physical disabilities. The pants have reinforced wrist loops for caregiver use in lifting and dressing. Other standard features include a wide cut and high rise in the back and an elasticized waistband with adjustable cord. These pants are available with a drop front opening, a Velcro fly, inner seam openings, or full outside leg openings.

Children's Cargo Shorts With Opening Options (Model C125C)

The Children's Cargo Shorts with Opening Options, model C125C, are children's pants designed for use by individuals with mobility, neurological, or severe physical disabilities or spinal cord injury. These shorts have reinforced wrist loops for lifting and dressing. Other standard features include a wider cut and higher rise in the back, and an elasticized waistband with adjustable cord. These shorts are made from polyester/cotton fabric or 100 percent polyester micro fiber and are available wit

Children's Casual Denim Pants With Opening Options (Model C122-Denim)

The Children's Casual Denim Pants with Opening Options, model C122-Denim, are children's pants designed for wear by children with mobility, neurological, or severe physical disabilities or spinal cord injury. These pants have reinforced wrist loops for use in lifting and dressing. Other standard features include an elasticized waistband with adjustable cord, and a wider cut and higher rise in the back. The pants are made from 8-ounce 100 percent pre-washed cotton denim, with either a Velcro fly,

Children's Casual Pants With Opening Options (Model C122)

The Children's Casual Pants with Opening Options, model C122, are children's pants designed for wear by children with neurological or severe physical disabilities or spinal cord injury. Standard features include a wider cut and higher rise in the back, a wide hem to accommodate growth, an elasticized waistband with adjustable cord, and reinforced wrist loops for lifting and dressing by caregivers. These pants are made from a cotton/polyester blend, and are available with a Velcro fly, a drop fro

Children's Fleece Pants With Outside Seam Openings (Model C121-4)

The Children's Fleece Pants with Outside Seam Openings, model C121-4, are children's pants designed for use by children with mobility disabilities, severe physical disabilities, spinal cord injury, or incontinence. These pants have a higher rise in the back for wheelchair users or walkers, and a wider cut to accomodate diapers. They also have an elastic waist with an adjustable cord, reinforced wrist loops for lifting and dressing, cuffs on the hems, and thigh-level patch pockets. Outside seam o

Children's Romper Bodysuit (Model C611)

The Children's Romper Bodysuit, model C611, is a child's bodysuit designed for use by children with severe physical disabilities or incontinence. This garment can be used to protect skin under a brace, to protect an incision, or to keep the child's hands away from a diaper. Features include a snap crotch and a wide cut at the hip and seat to accommodate a diaper. The garment is made of 49 percent polyester/51 percent cotton interlock knit fabric, with wide leg ribbing that ends at mid-thigh. SIZ

Children's Sleeve Bib (Model S13182 )

The Children's Sleeve Bib, model S13182, is a full sleeved bib designed for use by children with eating or swallowing disabilities. This bib is made of cotton and fits children up to two years old. The sleeves provide full upper body protection from food waste. SIZE: One size fits all. COLOR: Assorted prints including cars, animals, pockets, denim, teddy bears, and other festive prints.

Children's Sleeveless Bodysuit (Model C600)

The Children's Sleeveless Bodysuit, model C600, is a bodysuit designed for use by children with tracheostomies, severe physical disabilities, or incontinence. This garment can be used to protect skin under a brace, to protect an incision, or to keep the child's hands away from a diaper. Features include a snap crotch, a wide cut at the hip and seat to accommodate a diaper, and a scooped neckline that will not interfere with a trach tube. The garment is made of 49 percent polyester/51 percent cot

Children's Wheelchair Style Jeans (Model C301)

The Children's Wheelchair Style Jeans, model C301, are children's jeans designed for wear by children with mobility, neurological or severe physical disabilities, or spinal cord injury. These jeans have reinforced finger loops at every opening to assist caregivers in dressing the child. Other standard features include double stitching, a high rise and elastic waist in the back, extra room in the seat, and five pockets. These jeans are made from 100 percent cotton and are available with a Velcro

Chincheeka Dual Switch (Model H-51)

The ChinCheeka Dual Switch, model H-51, is a chin or cheek switch designed for use by individuals with severe physical disabilities, spinal cord injury, or cerebral palsy. This two-switch unit can be used for step-scanning/ control on a computer or for switch-adapted items that require two switches. In step-scanning, one switch is used to step (move) through choices, and the other to select a choice. OPTIONS: Magic Arm, Mini-Arm, or Articulating Arm for mounting.

Chirping Chick (Model 62)

The Chirping Chick, model 62, is a toy designed for use by children with mobility, upper extremity, or severe physical disabilities. This fluffy yellow chick chirps when a slight amount of pressure is applied to its head or the yellow activation pad. POWER: Uses 2 AAA batteries (not included). DIMENSIONS (HxLxW): 5.25 x 4.25 x 3.5 inches.

Choice 4 Communicator (Model 1237)

The Choice 4 Communicator, model 1237, is a direct selection transitional communicator designed for use by individuals with communication or speech disabilities. This 12- level communicator with auditory cueing has space for four picture icons (not included) and a total of 300 seconds of recording time. Bright lights allow objects, photographs, or icons to be illuminated in sequence. The user has the choice of working with one field at a time or adding up to four fields by pressing two cells and

Chordmaps.com - Yours To Play It

Chordmaps.com- Yours To Play It! is a music composition program designed for use by individuals with upper extremity, neurological, or severe physical disabilities or spinal cord injury. This software package enables the user to play chords and chord progressions by clicking on an on-screen "musical map" with a mouse or similar controller. This songwriting and educational music tool enables the user to explore chords and progressions in all the major keys, even if they have never played an instr

Cinema II-Life Skills

Cinema II - Life Skills - Program #502 is a cause & effect program that is age appropriate for older as well as younger populations. This program is made up of 75 film clips covering various categories where 8 out of the 10 categories are dedicated to common life skills such as putting on your shoes, putting on a hat. Each film clip lasts approximately 5 - 10 seconds. When the switch is pressed the first time, the title of the clip is displayed in large letters on the top of the screen and a

Cintex4

CINTEX4 is an environmental control unit designed for use by individuals with severe physical disabilities or spinal cord injury. This system enables the user to dial and answer the phone, control infrared devices such as televisions, VCRs, DVD’s, stereos, CD players, etc., and control appliances such as lights, fans, etc. using voice commands or switch input (an input program such as Dragon NaturallySpeaking Professional or a switch input program for keyboard emulation required, but not include

Clamp On Mount

Clamp on Mount is a table-top mounting system designed to support AAC devices such as Dynavox V/Vmax, MyTobii P10 and other devices. It is height adjustable from approximately 0 to 180 millimeters and can be angled and repositioned. The Clamp on Mount has a Manfrotto Super Clamp base and Quick-Shift handles for quick and easy adjustment.

Clamp-- Positioning, Swivel Hold Down, Fixed Hold Down

These Clamps are seating hardware designed to be used in wheelchair seating systems. The Positioning Clamp has applications where clamping of the mounting hardware is fastened to the tubing of the wheelchair. It is most often used on the rear of the wheel base to position the chair initially and to keep the chair from shifting. The Swivel Clamp is a riveted one-piece design, used for securing the seat to the wheel base or wheelchair. By turning the swivel hold-down 90 degrees, complete seating d

Clamp-It

Clamp-It is an adjustable craft tool holder designed for use by individuals with use of only one hand, arthritis, or fine motor or physical disabilities. Clamp-It is mounted on four suction cups, and can be used vertically or horizontally to hold an item in a fixed position. The clamp size can be changed by turning two wing nuts. DIMENSIONS: Maximum holding width is one inch.

Clamp-On Bump Switch

Clamp-On Bump Switch is a button switch activated by 2 ounces of pressure on its tip. This switch is designed to be attached to a bed, chair, table, etc. and activated by any convenient part of the body. Both momentary and toggle models are available.

Clamp-On Cup Holder (Model 16C035)

The Clamp-On Cup Holder, model 16C035, is a wheelchair drink holder designed for use by individuals who use wheelchairs. This device attaches to most wheelchairs. Once the attachment clip (included) is installed onto the chair, the cup holder itself can be removed as needed. There are no tools required. DIMENSIONS: Attachment clips fit 7/8 and 1 inch tubes.

Clamp-On Table Top Mount

The Clamp-On Table Top Mount is a table mount for a communicator designed for use by individuals with communication or speech disabilities and severe physical or neurological disabilities. Designed for use with ComLink handheld communicators (see separate entries), the system is lightweight and can be taken from class to class or room to room.

Classic Footswitch (Models 77 Sn-1, 2, 3, 4, & 5)

Foot operated momentary switch. Cast aluminum housing and treadle. Non skid steel baseplate. POWER: 10 or 15 amps, 125 to 250 volt AC, 1/2 horsepower. DIMENSIONS: 5.25 x 3.25 x 1.75 inches.

Classic Ii Medium Duty Footswitch

Footswitch. Cast aluminum foot operated, single stage momentary switch. Steel non skid baseplate. POWER: 20 amps, 125-250 volt AC, one horsepower. DIMENSIONS: 6.5 x 3.5 x 2.25 inches. WEIGHT: 2.75 pounds.

Classic Reed Footswitch (Models 77Sn9O & 77Sn9P)

Foot operated reed switch. Switch encapsulated in thermoplastic material and encased in cast aluminum housing. Spring return aluminum treadle. Steel, nonskid baseplate. DIMENSIONS: 5.5 x 3.25 x 1.75 inches. WEIGHT: 1.5 pounds.

Classic Solid State Footswitch (Models 77Sn8E & 77Sn8F)

Foot operated current sinking solid state switch. Low power device. Spring treadle action. DIMENSIONS: 5.5 x 3.25 x 1.75 inches. WEIGHT: 1.5 pounds.

Classic Variable Control

Footswitch. 5 1/2 by 3 1/4 by 1 3/4 inches, foot operated momentary switch controls small fractional horsepower universal motors. Low speed adjustment. Housing and treadle are cost aluminum. Non skid steel base plate. Long treadle travel. POWER: 6 amps 125 volt AC or 3 amps 250 volt AC. WEIGHT: 1.5 pounds.

Classical Violin

The Classical Violin is a switch activated toy designed for use by children with upper extremity or severe physical disabilities or spinal cord injury. This toy toy violin has realistic sounds and details. Move the bow across the strings or activate an attached capability switch (not included) and the toy violin plays the right notes. Additionally, with a push of a button this toy plays eight different songs: "Menuet," "Ode to Joy," "Auld Lang Syne," "Red River Valley," "You are My Sunshine," "G

Classroom Chair Footstool

CUSTOM ADAPTATION PURPOSE: To enable a child with neurological disabilities to participate in the classroom. This footstool has a plywood platform containing holes in one of the long edges through which the legs of the chair can be inserted. This holds the chair and the footstool together, reduces the chance of knocking the stool over, and keeps the chair and the stool in optimal position. The stool legs can be cut down in the future for continued use as the child grows. TITLE: School Desk and

Classroom Positioner Chair (Models Cpc25, Cpc29, & Cpc33)

The Classroom Positioner Chair is a youth positioning chair designed for use by children with mobility or neurological disabilities. This wooden chair features independent adjustment of the height, depth, and angle of the seat back and footrrest. The contoured seat cushion can be set at up to 20 degrees anterior tilt, as well as level or at a posterior tilt. The chair comes standard with a contoured seat cushion, seat belt, back pad, lateral supports, and locking casters. OPTIONS: Foot surface w

Classroom Positioner Desk / Stander (Models Ds1 & Ds2)

The Classroom Positioner Desk/Stander is a height-adjustable classroom desk and standing table designed for use by children with mobility or neurological disabilities. This desk can be used with the Classroom Positioner Chair (see separate entry) or independently. Features include height and angle adjustability, a multi-adjustable desktop, adjustable knee block, and lateral pelvic pads for standing positions. The desk also included latches to secure it to the Classroom Positioner Chair. The desk

Cleaning Assistant

The Cleaning Assistant is designed to be used by persons with physical and cognitive disabilities whose condition(s) require the use of a diaper. The Cleaning Assistant allows for an individual’s caregiver to clean his underbody quickly and easily after a bowel movement. A toilet-mounted device system consists of four nozzles for pressurized water spray and two nozzles for soap spray. The water system is supplied by the existing hot and cold water supply that goes to the bathroom sink, thus a

Clear Acryic Wheelchair Tray (Model H1202)

The Clear Acrylic Wheelchair Tray, model H1202, is a lapboard designed for use by individuals who use wheelchairs. Made of clear acrylic, this tray attaches to the wheelchair armrests, has a round torso cutout, and provides a large surface for eating, working, and other activities.

Clear Food Guards (Models 31050 & 31051)

The Clear Food Guards are designed to assist people with physical disabilities in keeping food on the plate while eating by providing a high, curved lip with which to push food onto utensils. Fabricated of molded plastic, these see-through guards are dishwasher-safe. DIMENSIONS: The small model, number 31051, fits 5.5- to 7-inch plates, and the large model, number 31050, fits 8.5- to 10-inch plates. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for

Clear-View Head Pointer (Model 6000)

The Clear-View Head Pointer, model 6000, is a head pointer designed for use by individuals with spinal cord injury, upper extremity disabilities, or severe physical disabilities. The Clear-View Head Pointer projects out at jaw level, not at forehead level. Having the pointer extend out from jaw level places the pointer in closer proximity to the object being selected, requires minimal head movement, and does not interrupt the user's field of vision during use. The lightweight aluminum yoke can b

Clicker 6

Clicker 6 is a voice output word processor program and on-screen keyboard program designed for individuals at all ability levels, including students with learning disabilities or cognitive disabilities. It has a wide range of accessibility options for users who cannot use a mouse or keyboard, including individuals with upper extremity disabilities or spinal cord injury. In this program, users can create a customized on-screen keyboard grid with letters, whole words, or pictures. Users can click

Clicker Docs

Clicker Docs is a word prediction program, writing skills training program, and a reading, spelling and vocabulary tutorial program designed for individuals at all ability levels, including children with learning disabilities, dyslexia, low vision, or cognitive disabilities. This application (or app) for the Apple iPad enables students to develop reading and writing skills. Students can use the child-friendly keyboard to type into the word processor and various speech options allow them to revie

Clinitron At Home Air Fluidized Therapy Bed

The Clinitron At Home Air Fluidized Therapy Bed is a flotation bed designed for use by individuals with pressure sores/ulcers, spinal cord injury, or severe physical disabilities. The bed surface is filled with ceramic beads similar to sand; the gentle airflow through the beads "floats" the user, resulting in the lowest possible interface pressure and virtually eliminating shear and friction. The airflow also provides warmth and aids in providing comfort and pain reduction. Bead temperature is a

Clip Stroller / Pushchair Size 1

The Clip Stroller / Pushchair 1 is a lightweight folding stroller designed for children with mild to moderated neurological and mobility disabilities. It is designed to provide head and trunk support. The size 1 Clip special needs stroller will support up to 66 lbs (30 kg). The Clip comes standard with a reclining backrest that is adjustable by zippers located behind the backrest. The backrest will adjust from 0 to 12 degrees from the upright position. A height adjustable footboard is also inclu

Clip-On Glass Holder (Model F74576)

The Clip-on Glass Holder, model F74576, is a drink holder designed to be attached to a wheelchair frame, commode, or other tubular frame haveing a diameter of 0.75 to 1 inch. This helical spring-wound wire holder has a baked-on enamel finish and a plated clip. DIMENSIONS: 2 7/8 inch inside diameter x 3 inches high.

Clipper Footswitch

Footswitch. Variety of sizes and shapes of foot operated one or two stage momentary or latching switches. Cast aluminum housing. 1, 2, or 3 pedal models. Latching models have push on, push off mechanism. POWER: 20 amps 125-250 volt AC, 3/4 or 1 horsepower, 15 amps 125 volt AC, 1/2 horsepower or 10 amps 250 volt AC, 1/2 horsepower. Optional foot shield, or 10 amps 125 volt DC - volt AC 1/4 h.p. WEIGHT: 2.25 pounds.

Clothing Protector T-Shirt (Model Mf101T)

The Clothing Protector T-shirt, model MF010T, is a bib designed for use by individuals with upper extremity disabilities or spinal cord injuries. The cotton T-shirt-style bib has three snaps on the back and a waterproof lining on the opposite side. SIZE: One size fits all. COLOR: Black, navy,royal, kelly green, olive, red, and purple.

Clothing Protector Vest & Clothing Protector Vest Xl (Model Mf101V & Mf101Ve )

The Clothing Protector Vest and Clothing Protector Vest XL, models MF101V and MF101VE, is a vest designed for wear by men or women with upper extremity or spinal cord injuries. The vest is 100 percent cotton and has a waterproof lining and a Velcro tab closure. The XL version (model MF101VE) is 6 inches longer the regular version. SIZE: One size fits all. COLOR: Purple, blue, burgundy, tan, forest green, lime green, or grey. Solid colored fronts with printed backs are also available.

Clothing Protector With Snaps (Model 16T083)

The Clothing Protector with Snaps, model 16T083, is an adult bib designed for use by individuals with upper extremity or eating disabilities. The bib covers from neck to lap with snap closure at the neck. It has a polyester cotton front and waterproof backing. DIMENSIONS (LxW): 35 x 18 inches. COLOR: Comes in a variety of colors and patterns.

Clothing Protectors

The Clothing Protectors are bibs designed for use by individuals with eating, upper extremity, or drooling disabilities. Made of tear-resistant, machine washable vinyl, these protectors have closures at the neck. The protectors are available in clear vinyl with a snap closure and with or without a food catch pocket along the bottom. Also available is a reversible model with absorptive terry cloth on one side, a food pocket along the bottm, and snap closure. The Economy Terry Cloth model is made

Clothing Store Words And Signs

Clothing Store Signs and Words is a personal skills and independent living skills tutorial program designed for use with individuals with cognitive or developmental disabilities. This program teaches 80 signs and words which are essential for clothing shopping. Categories include types of clothing (big and tall, formal wear, children’s); common clothing terms (bathrobe, blouse, dress, jeans, price, shoes); sizes (boy’s, girl’s, men’s,women’s); patterns (checked, plaid, solid, stripes); and mater

Cloud Cushion (Model 9Clcl)

The Cloud Cushion, model 9CLCL, is a body positioner designed for use with individuals with neurological or severe physical disabilities. Made from strong PVC vinyl, this inflatable cushion also contains a layer of foam. When properly inflated, this cushion conforms to the user's body shape. DIMENSIONS: 84 x 84 x 12 inches.

Cloud Cushion, The

The Cloud Cushion is a foam wheelchair cushion designed for use by individuals at risk for pressure sores or ulcers. The Cloud Cushion offers protection and stability in a lightweight, low-profile design. It produces acceptable levels of pressure distribution, eliminating the risk of bottoming out and the potential for failures due to punctures or leaks. The cushion corrects to automatically adjust to the dynamic conditions that occur within the seating environment. The Lycra Cel-Pak is install

Co-Oper Band

The Co-Oper Band is an exercise band designed for group use with children with cognitive or severe physical disabilities. This soft, stretchy band is made of latex tube covered with soft fabric and is designed for group movement and cooperation activities. DIMENSIONS: The latex tube is 2.5 inches in diameter.

Co:writer 4000

Co:Writer 4000 is a word prediction program designed for use by children and teens with learning or upper extremity disabilities. This voice output program utilizes FlexSpell and the Total Vocabulary System (TVS) to provide users with the tools required for writing. FlexSpell enables students to work at their developmental spelling level by permitting them to begin words phonetically or by cueing initial letter combinations; both approaches provide lists from which the correct word can be selec

Coffee Spillers Inc. Biball

Coffee Spillers, Inc. BibAlls are bibs designed for use by children and adults with eating, swallowing, upper extremity, or severe physical disabilities. These reversible bibs have a soft French terry front and a lightweight backing coated in 100 percent rip-stop nylon. These bibs are silk screened with "Coffee Spillers, Inc." and a coffee cup. Machine washable and dryable, the bib has Velcro closure and comes with a carrying and storage bag. DIMENSIONS (WxL): 17 x 33 inches. COLOR: Navy or brow

Collapsible Dam (Models Cwr-42, Cwr-54, Cwr-66 & Cwr-96)

The Collapsible Dam, models CWR-42, CWR-54, CWR-66 and CWR-96, is a water dam for a shower designed to control water spillage from all types of barrier-free, curbless showers. This device collapses easily by foot or wheelchair pressure and features a strong self-adhesive, water-resistant tape bottom. SIZES: 42 inches (for 36-inch opening); 54 inches (for 48-inch opening); 66 inches (for 60-inch opening); 96 inches (for 90-inch opening). OPTIONS: End caps for showers with radius end walls are ava

Color Bug (Model 3960)

The Color Bug, model 3960, is a remote control, switch-operated toy designed for use by children with severe physical or upper extremity disabilities. Once the light touch directionality switch is activated, this bug moves around creating fun patterns. Inserting one of the four included markers causes the toy to draw the patterns, enabling the user to create unique pictures. POWER: Uses 3 AAA batteries. The controller uses one 9-volt battery. DIMENSIONS (HxLxW): The Bug is 2 x 5 x 3.5 inches. Th

Color Change Switch (Model 3Tspl)

The Color Change Switch, model 3TSPL, is designed for use by individuals with severe physical or upper extremity disabilities. This plate switch has a large translucent plate that changes color each time it is tapped, providing visual reward and reinforcement each time the switch is activated. The switch base is equipped with suction cup feet to keep the switch in place. DIMENSIONS: 14 x 5.5 x 4 inches.

Colorcards Interactive: Everyday Objects

ColorCards Interactive: Everyday Objects is a problem solving program and visual training activity designed for use by children with neurological, cognitive, or visual disabilities. This program reinforces key skills in visual discrimination, problem solving, number skills, concentration and attention, and semantics/categorization. Six activities offer three levels of audio and visual help, and concentrate on key areas. Activities include Match the Picture with picture to picture matching, audio

Columbia Therapedic Explorer Mobility Base (Model 2100)

The Columbia TheraPedic Explorer Mobility Base, model 2100, is a stroller base for a detachable car seat designed for use by children with balance disabilities, neurological disabilities, and severe physical disabilities. This stroller base fits the Columbia TheraPedic Positioning Seat (see separate entry). The base folds for storage, and has a Tilt-In-Space feature that allows the seat to be tilted in any of five positions in the base. FRAME (HxLxW): 37 x 47 x 22.5 inches when open; 11 x 41 x 2

Columbia Therapedic Positioning Seat (Model 2000)

The Columbia TheraPedic Positioning Seat, model 2000, is a car seat designed for use in the transport of children with physical and neurological disabilities affecting balance and the ability to sit upright. The seat can be used by children up to 5 feet tall, and may also be used as a wheelchair insert. The unit consists of a vacuum-formed ABS plastic shell with chromed steel side tubes, fire-retardant upholstery, a five-point nylon webbing safety harness, and a nylon webbing supplementary tethe

Columbia Toilet Support (Models 4700 & 4800)

The Columbia Toilet Support, models 4700 and 4800, is a high-backed toilet support designed to provide head and trunk support for children and adults with balance disabilities. The unit has a full-length, height adjustable, high-impact ABS plastic back and a harness with a safety buckle. The support bolts directly to the toilet and the children's model, model 4700, includes a seat reducer ring. Model 4800, the adult model, sits 4 inches further back on the toilet seat than model 4700. OPTIONS: A

Columbia Wrap-Around Bath Support (Models 7200, 7300, & 7700)

The Columbia Bath Support is a child bath seat designed to hold a child in a normal sitting position to provide trunk stabilization and to free the hands of the individual helping to bathe the child. It may also be used in other seating applications and in supervised wading pools. The support has a secure, contoured trunk yoke. The chair frame rests on the bottom of the tub and has a soft coating to protect the tub's finish. The seat features a rustproof frame, a rip-proof mesh seat, and stainle

Combo Walker / Wheelchair Bag (Model 6434)

The Combo Walker/Wheelchair Bag is a carrying bag or caddy for use by people who use wakers or wheelchairs. The denim bag features four pockets ataches to the front walker bar or wheelchair arm using the attached straps. DIMENSIONS: 13 x 9.5 inches. COLOR: Blue.

Comet Series 300

The Comet 300 Series are transport wheelchairs designed to transport individuals with mobility or cognitive disabilities who are unable to maneuver a wheelchair independently. FRAME: Steel folding frame in blue, red, or silver, depending on model. SEAT: The seat width is available in 17 inches (models 301, 317, 327), 17.5 inches (model 338), 18 inches (model 339), and 19 inches (models 309, 319, 329, 339). The seat depth is 16 inches. The distance from the seat to floor is 18 inches (model 330),

Comfort Carrier Evacuation System

The Comfort Carrier Evacuation System is an emergency evacuation system designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. Designed for use in multistory buildings, the package includes an ADA-compliant steel cabinet with an alarm and a clearly illustrated acrylic window, which is placed on the wall near a fire exit; a Comfort Carrier Evacuation Sling (see separate entry), which fits inside the cabinet; illustrated usage instructions; an overhead

Comfort Carrier Transfer Sling

The Comfort Carrier Transfer Sling is a manual transfer sling designed for use by wheelchair users with spinal cord injury, neurological disabilities, stroke, cerebral palsy, or brain injury. This sling enables wheelchair users to transfer with assistance from two helpers. The sling is slipped around the seated user, then is crisscrossed under the thighs and its buckle is fastened. Two assistants (in front and back or on each side) lift and transfer. The foldable sling is lightweight and machine

Comfort Pad For Economy Molded Lap Tray (Model A707-151)

The Comfort Pad for Economy Molded Lap Tray, model 707-151, is a lapboard overlay designed for use with the Economy Molded Lap Tray (see entry). This pad fits securely within the lip of the tray and is secured with the tray's D-ring straps. The pad has an integral cup/glass recess. OPTIONS: The pad and tray can be purchased separately or as a unit. DIMENSIONS: The pad is 0.5-inch thick.

Comfort Plus Wheelchair Liner (Model Vlm6630)

The Comfort Plus Wheelchair Liner, model VLM6630, is a decubitus pad designed for use by individuals with mobility disabilities or spinal cord injury who are at risk for pressure sores/ulcers. The pad covers the wheelchair seat, sides and arms, and back, and is made of lightweight, latex-free fiber material that resists matting and allows air circulation. It has an incontinence cover on one side and is machine washable. COLOR: White.

Comfort Plus Wheelchair Seat Pad (Model Vlm6610)

The Comfort Plus Seat Pad, model VLM6610, is a decubitus pad designed for use by individuals with mobility disabilities, severe physical disabilities, or spinal cord injury who are at risk for pressure sores/ulcers. This latex-free wheelchair seat pad is made of a lightweight material that resists matting and allows air circulation. The pad has an incontinence cover on one side and is machine washable.

Comfort-Cape

The Comfort-Cape is a shampoo basin designed to ease shampooing for individuals with Alzheimer's disease, arthritis, and severe physical disabilities. The Comfort-Cape is a lighweight, fabric tray which is positioned between the back of the individual's head and the shampoo sink behind them. The device is flexible and has the ability to conform over and around any chair. Buckle and Velcro fasteners secure the unit and accommodate health conditions including vertigo, scoliosis, and autism. It i

Comfort-U Total Body Pillow

The Comfort-U Total Body Pillow is a body support pillow designed for use by individuals with arthritis and other disabilities. Filled with hypoallergenic Fossfil, this U-shaped pillow has long "arms" to provide complete body support in any position. The pillow can be wrapped to any position to cradle specific areas, including the head, arms, neck, back, and hips. Shaking this pillow out restores it to its original shape. A cotton zippered cover is included. OPTIONS: A natural unbleached cotton

Comfortarm Armrest

The ComfortArm Armrest is an arm trough designed for use by individuals with spinal cord injury, neurological disabilities, and other mobility disabilities and upper extremity disabilities. Appropriate for individuals with elbow contractures, this unit features a deep arm well, full articulation, and solid mounting. Available for the right or left arm in standard or elevating models, the standard unit allows the arm trough to be elevated and articulated with a quick release lever, while the swin

Comfortpan

The Comfortpan is a bariatric bed pan designed for use by individuals with mobility or severe physical disabilities. Made of soft, flexible polymeric material, this high-strength bedpan holds two quarts of fluid, approximately twice the volume of a standard metal bedpan. The seat area is flexible and conforms to the shape of the body. The low rim at the back of the seat is only one half of an inch high allowing body positioning without having to arch the back. DIMENSIONS (HxLxW): 3 x 15 x 14.25.

Comlink Lt3G

The ComLink LT3G is a direct selection and scanning communicator designed for use by individuals with speech or communication disabilities and severe physical or neurological disabilities. Designed to be fully accessible, this device supports a range of access methods, including touch screen (press, hold time-out), visual and auditory scanning (up to 8 switches), joysticks, sip and puff switches, optical head mouse, voice recognition, and eye tracking (with Enable Eyes; see separate entry). The

Comlink Lt3G Enable Eyes

The ComLink LT3G Enable Eyes is a direct selection or scanning communicator designed for use by individuals with speech or communication disabilities and severe physical or neurological disabilities. Designed to be fully accessible, this device supports a range of access methods, including touch screen (press, hold time-out), visual and auditory scanning (up to 8 switches), joysticks, sip and puff switches, optical head mouse, voice recognition, and eye tracking. This device includes the Enable

Comlink St-Lite

The ComLink ST-Lite is a direct selection and scanning communicator designed for use by individuals with speech or communication disabilities and severe physical or neurological disabilities. This device comes with a SoundPOD wearable augmentative and alternative communication (AAC) device. Users can remove the wireless SoundPOD from its magnetic docking cradle located on the back of the ST-Lite and then attach it to a lanyard (included) that fits around the user's neck. Users can convert back a

Comlink St3G

The ComLink ST3G is a direct selection and scanning communicator designed for use by individuals with speech or communication disabilities and severe physical or neurological disabilities. Designed to be fully accessible, The ST3G supports a range of access methods, including touch screen (press, hold time-out), visual and auditory scanning (up to 8 switches), joysticks, sip and puff switches, optical head mouse, voice recognition, and eye tracking (Enable Eyes required; see separate entry). The

Comlink St3G Enable Eyes Ii

The ComLink ST3G Enable Eyes II is a direct selection and scanning communicator designed for use by individuals with speech or communication disabilities and severe physical or neurological disabilities. Designed to be fully accessible, the ComLink ST3G Enable Eyes II supports a range of access methods, including touch screen (press, hold time-out), visual and auditory scanning (up to 8 switches), joysticks, sip and puff switches, optical head mouse, voice recognition, and eye tracking. The Enab

Comlink Ultra

The ComLink ULTRA is a direct selection and scanning communicator designed for use by individuals with speech or communication disabilities and severe physical or neurological disabilities. Designed to be fully accessible, the ULTRA supports a range of access methods, including touch screen (press, hold time-out), visual and auditory scanning (up to 8 switches), joysticks, sip and puff switches, optical head mouse, voice recognition, and eye tracking (Enable Eyes required; see separate entry). T

Comlink Ultra-Lite

The ComLink ULTRA-Lite is a direct selection and scanning communicator designed for use by individuals with speech or communication disabilities and severe physical or neurological disabilities. This device comes with a SoundPOD wearable augmentative and alternative communication (AAC) device. Users can remove the wireless SoundPOD from its magnetic docking cradle located on the back of the ULTRA-Lite and then then attach it to a lanyard (included) that fits around the user's neck. Users can con

Commercial Gentleman Public Access Door Operator

The Commercial Gentleman Public Access Door Operator is a powered door operator kit designed for use in public settings to provide barrier free access for people with mobility issues. The operator allows manual use of the door by those not requiring the automatic opener. This operator can be totally pneumatic in operation or interfaced with low voltage (wired or wireless) electronics for total public access. Standard Kit Includes - Commercial Opener & mounting hardware, 4 1/2" square poly bo

Communication Notebook

"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals who are not able to speak to communicate. To create the book using a computer, using a word processing program, set up a document with half-inch margins on all four sides and set the page orientation to landscape. Create a table that is 10 cells wide and 10 cells high. Format cells to be about 0.7-inch tall so that all ten rows fit on one page. Adjust as necessary. Using the template or personal design, create an alphabet and commonly us

Communicator Basic

The COMMUNICATOR BASIC is a voice input dialer program designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. This program offers complete voice-activated telephone dialing, including the ability to dial a phone call by speaking the name of the individual to be contacted or by speaking the digits to be dialed. This system requires a computer on which the voice dialing software can be installed and to which the base station for the wireless hea

Communicator Complete

The COMMUNICATOR COMPLETE is a voice input dialer program designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. This program offers the ability to dial a wireless headset by speaking the name of the individual to be contacted or by speaking the digits to be dialed. It also offers the ability to use voice commands to pick up call waiting, access multiple lines, control volume and mute functions, redial, and more. This system includes all hardw

Community Signs And Words

Community Signs and Words is a personal skills and independent living skills tutorial program designed for use with individuals with cognitive or developmental disabilities. This program teaches 80 signs and words which are essential for community living, including common information signs such as church, city hall, employment agency, clinic, library, grocery store, laundromat, taxi, post office, restaurant, etc. Multimedia software combines live action video and human-quality audio in an adult

Compact Activity Center & Side-Lyer Activity Center (Models 2300 & 2310)

The Compact Activity Center and the Side-Lyer Activity Center, models 2300 and 2310, is a play tray and sensory busy box designed for use by children with mobility, neurological, or severe physical disabilities. This small-scale activity center provides sensory stimulation and cognitive activity. Features include a bead curtain, a dome with brightly-colored sequins which spin when the button is pressed, a textured plate which vibrates and lights up when pressed, and a pullball that turns on a mu

Compact Footswitch

Steel housing foot operated momentary or latching switch. Skid proof base. POWER: 20 amps, 125 to 250 volt AC, 1 horsepower or 5 or 10 amps, 125 to 250 volt AC, 1/2 horsepower. DIMENSIONS: 2 7/8 x 2.5 x 1 1/8 inches. WEIGHT: 7 ounces.

Compact Switches (Model 745)

The Compact Switches, model 745, are touch switches designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. These tiny, sensitive switches can be mounted anywhere using the included Velcro. They can be grouped together to enable the user to activate three different devices. DIMENSIONS: The switches are 0.375 inches high and 0.75 inches in diameter. WEIGHT: 0.25 pounds.

Companion Remote Control (Model Hc1800C)

The Companion Remote Control unit, model HC1800C, is a remote environmental control unit designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. Using infrared and radio frequency technology, the unit can control many appliances in the home or workplace, including alarms, intercoms, door locks, door openers, window openers, lifts, telephones with loudspeakers, nurse call, pager, communication aids and computers, power sockets, lights, curtain openers,

Complete Feet

Complete Feet is a foot support designed for use by individuals who use wheelchairs. This foam-padded unit covers the footplates, extends to the calf, and attaches to the chair with heavy-duty straps to help protect and control flaccid feet. The contoured leg troughs have foam in two densities to protect the ankles, reduce abrasions, and allign the legs. Rear cutouts reduce skin breakdown on the heels. DIMENSIONS (HxW): Available for 12 x 16,18,20, and 8 x 16,18,20 inch wheelchairs.

Complete Feet Single Foot

The Complete Feet Single Foot is a foot support designed for use by individuals who use wheelchairs. This foam-padded unit covers the footplates, extends to the calf, and clamps to the footplate to help protect and control a flaccid foot. The other foot remains free for foot propulsion of the wheelchair. The contoured leg trough has foam in two densities to protect the ankle, reduce abrasions, and align the leg. A rear cutout reduces skin breakdown on the heel. DIMENSIONS (HxLxW): 8-10 x 10 x 7.

Composite Three -In-One Commode

The Composite Three-In-One Commode is a height-adjustable commode designed for use by individuals with severe physical disabilities. Ergonomically-shaped for comfort, the commode features the Exact Level system for height adjustment. The commode can be converted from a bedside commode to a safety frame or a raised toilet seat. The pail, lid and splash guard are included. The pail capacity is nine quarts DIMENSIONS (HxDxW): 24.5 x 17.5 x 25 inches. The width between the arms is 20.75 inches. Th

Computer / Communicator Tray

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a laptop with speech software and a wheelchair to access the computer screen and control switch while leaving the surface of the wheelchair tray free. Hardware from a standard roll out under desk keyboard shelf was modified to provide a platform for the laptop. Only the switch controlling the software is exposed on the tray surface, preventing inadvertent hitting of keys. The screen can be folded down and the complete unit stored

Computer Interface For Optical Headpointer.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Optical headpointer and photodetector circuit designed to be immune to false triggering. Describes a photodetector circuit tuned to respond only to light pulsed at 90 Hertz (from a headpointer beam), ignoring shifts in ambient light level and room lighting. Circuit output feeds directly into a computer. Includes circuit diagrams for a lamp driver and a photodetector. COMMENTS: For further information contact: G L Heseltine, Science Unlimited Research F

Computer Interface Music Maker

---- PROTOTYPE --------- PURPOSE: To develop a computer interface that tracks the movement of a user’s head, allowing them to produce electronic sounds and compose music on a virtual keyboard. Working with a team of musicians and programmers; Zane Van Dusen, Rensselaer Polytech Institute senior, creates a device to be used by individuals with severe mobility disabilities. This prototype allows individuals with severe mobility disabilities to express his or her creativity through music. The user

Computer Keyboard Aid

The Computer Keyboard Aid is a typing stick designed for use by individuals with limited hand function. Designed to help those who cannot access a keyboard with their fingers, this device can be used on typewriters, adding machines, calculators, and telephones. The device comprises a pointer with a round rubber tip for depressing the keys and a hand loop that secures with Velcro. DIMENSIONS: 7.5 inches (19 centimeters) long. WEIGHT: 1 pound.

Conductor Transmission Gel

Conductor Transmission Gel is electrode or ultrasound gel designed for use with ultrasound or electrical stimulator units. This water-soluable, non-greasy gel is available in in a five liter jug packaged with a nineounce dispenser bottle or a case of 24 nine-ounce dispenser bottles.

Contact Pad Switch

The Contact Pad Switch is a touch switch designed for use by individuals with limited upper extremity strength and mobility. No pressure is required to activate this switch; simply making skin contact with the pad surface activates the switch. This switch is equipped with an 1/8th inch jack. POWER: Uses one 9-volt battery (not included).

Continental Back Pack

The Continental Back Pack is a wheelchair back pouch designed to attach to the chair's handgrips with straps. An inner pocket has a top zipper closure, or a flap with a velcro closure. One large and two small outer pockets are included for access to smaller items. DIMENSIONS: 16 x 16 inches. COLOR: Black or saddle vinyl.

Contour Seat Cushion (Model Sc1500)

The Contoured Seat Cushion, model SC1500, is a wheelchair seat cushion with a contoured base designed for individuals with severe physical disabilities who spend extended time in a wheelchair. The cushion is made of a variety of open-cell and closed-cell foams, starting with a closed-cell base and a contoured open-cell layer. Then a one-inch Viscoelastic contouring foam is overlayed, providing maximum pressure distribution. Velcro strips are sewn in the Rubatex slipcover for secure seat placemen

Contoured Back (Model Cb2000)

The Contoured Back, model CB2000, is a curved back insert for wheelchairs designed to position individuals with severe physical disabilities when seated in a wheelchair. The Back Support Panel is made of high-strength aluminum alloy laminated with a black textured vinyl and edged with a continuous neoprene edging which is formed for a contoured fit. All mounting holes are a stardard one-inch between centers. Mounting hardware allows for a variety of back angle adjustments with positive locking.

Contoured Hip Pad Kit - As4000 & As5000 (Models 4341-71, -72, -73, 4343-71, -72, -73, 4347-71, -72, -73, 4350-71, -72, -73, 4353-71, -72, -73)

The Contoured Hip Pad Kit is a lateral hip guide designed to position the hips of an individual with spinal cord injury or severe physical disabilities while seated in a wheelchair. The pads are designed with internal threads front and back for mounting to support brackets which attach to seat bottom. They are adjustable from front to back, in and out, and up and down. There is also a set of internal threads for subasis bar mounting. The Contoured Hip Pad has a contoured shape for maximum hip an

Controflex General Purpose Ribbon Switches (Models 101-Bmt131-A, 131-Amt, 121-Bp, & 141-Bph)

The CentroFlex Ribbon Switches are vinyl-coated momentary type switches for pilot, control, or low power duty. The switches offer Press-at-Any-Point control and are self-bottoming. A wide range of pressure sensitivities, sheathing materials, switch lengths, end terminating seals, exterior colors, and lead wire cominations are avaialble. Nominal sensitivies of 40, 12, and 8 ounces are standard. All models are sealed for moisture and chemical resistance. All switches are available adhesive backed.

Controflex Footswitch (Models 111 & 111-B)

The ControFlex Foot Switches are waterproof, sealed vinyl foot-operated momentary switches. They are rated at 100 watts and 5 pounds nominal foot pressure and feature normally open contacts. Model 111 has an operating force of 5 pounds; model 111-B is more sensitive with an operating force of 1.5 pounds. The lead wire for both models is 18 AWG and 6 feet long. The switches will operate at temperatures up to 150 degrees Fahrenheit and to 0 degrees Fahrenheit or below. DIMENSIONS: Switches are 2 x

Convaid Carrot 3 Special Needs Booster Seat

Convaid Carrot 3 Special Needs Booster Seat is a restraint system designed for children and teens 3-15 years of age with special needs. This special needs booster was designed to provide optimal positioning & safety for children with limited head, trunk, and pelvic stability with neurological and motor disabilities. The “free angle” recline allows the hip area to recline for diaper access and changes (reclines at any position from 90 -180 degrees). Modular extensions and accessories allow e

Converta Step

ConvertaStep is an incline platform lift that is designed for use by individuals with limited mobility and require assistance to navigate stairs. The ConvertaStep is constructed of heavy, weather-coated steel that can lift up to 750 pounds. Its smooth lift raises in 8 to 15 seconds and is 31 inches wide to accommodate most chairs and other mobility devices. It is designed to be inconspicuous to the eye and blends easily with any home decor. The small, cost-effective lift comes in 3 sizes and is

Convoluted Wheelchair Pad With Nylex Cover (Models Cbc019055, Msc019008, Msc019005, & Msc019010)

The Convoluted Wheelchair Pad With Nylex Cover is a foam wheelchair cushion designed for use by individuals with mobility disabilities. The nylex cover is fluid-resistant and antimicrobial. The foam pad is convoluted or ridged to help prevent the user from sliding forward or out of the wheelchair. Model MSC019005 is latex-free. DIMENSIONS (HxLxW): 4 x 26 x 18 inches (model CBC019055), 2 x 16 x 22 inches (model MSC019008), 4 x 18 x 18 inches (model MSC019005), or 3 x 18 x 18 inches (model MSC0190

Cookie Sheet Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Pressure switch made of cookie sheets which can be used to activate a tape player, battery toy or light. Switch made of 2 aluminum or steel cookie sheets ( or pizza pans), a subminiature size plug, 4 feet of 2 conductor 22 gauge stranded wire, and foam insulation tape. Includes instructions, diagrams and a photograph. Suggests uses. SKILLS REQUIRED: Electronics. Soldering. Assembly. AUTHOR: Burkhart, L J TITLE: More Homemade Battery Devices for Severel

Cool Zone Medium Sports Cool Vest

The Cool Zone Medium Sports Cool Vest is a cooling vest designed for use by individuals with multiple sclerosis and other neurological disabilities. The vest includes Velcro adjustable straps that stay in place during high activity, and cooling packs that can be removed for charging in ice water, freezers, or refrigerators. The heavy-duty packs are puncture-resistant and offer up to four hours of cooling. SIZES: One size. OPTIONS: Velcro strap extenders are offered for individuals with chest mea

Coracle Swings (Standard, Deep Window, & Shallow Heavy Duty)

Coracle Swings are designed for use by children and adults with severe physical or neurological disabilities. These swings are designed to enable the user to lie or sit in them. Made of reinforced nylon material that conforms to the users body shape, the ends of the swings are padded and pull ropes enable the user to move the swing independently. The separate suspension ropes are adjustable so that the user's head may be raised. Three different models are available: The Standard Coracle, model

Corner Ball Pool

The Corner Ball Pool is a ball flotation therapy shape designed for use in soft play areas. This ball pool is designed to be used in conjunction with existing wall padding and so requires only two self-supporting walls. Both inner and outer walls (sold separately) are available. OPTIONS: Single ball pool step, set of four steps, ground sheet for ball pools, and sets of 1,000 balls. DIMENSIONS: The inner walls are 48 inches high. The outer walls are available in a choice of 36 inches high x 12 in

Corner Chair

The Corner Chair has been developed specifically for young children from the age of 8 months with neurological, mobility, or severe physical disabilities who are working on improving their sitting balance. The Corner Chair is ideal for daycare, school and home environments. These chairs are designed to provide support at the back and sides of the child to improve sitting balance. These chairs are adjustable and grow with the child.

Corner Chair (Models C4, C4-C, C5 & C5-C)

The Corner Chair is an adjustable corner seat designed for use by children with neurological, mobility, or severe physical disabilities. This chair provides support for asymetrical posture and midline control of the head and trunk. All models include a firm, padded insert which converts the V-shaped back to a three-section wing back. The seat can be raised so the child can be positioned with the hips and knees flexed or lowered so that the hips are flexed and the legs extended to facilitate long

Corner Seat

The Corner Seat is a corner seat designed for use by children with neurological or severe physical disabilities. This chair is portable for use anywhere indoors or out and can also be used in a bathtub. It has an H-strap and hip belt to stabilize the shoulders, pelvis, and trunk and a built-in abductor to help maintain leg extension and reduce thrust. Features include a broad, stable base and easy-to-wash polyethylene surface. DIMENSIONS (HxLxW): 22.5 x 11 x 19 inches. The base is 17 x 27 inches

Corner Sitter

The Corner Sitter is a corner chair designed for use by children with neurological or severe physical disabilities. This chair is designed to help improve posture and promote upper body control. Features include a reclining backrest with adjustable sides for lateral support. The backrest angle is adjustable from a 20 degree recline to 15 degrees prone. Other features include a hip belt and an adjustable depth, removable pommel. The chair folds flat for storage. OPTIONS: Options include a high-ba

Cosmic Steering Wheel (Model 779)

The Cosmic Steering Wheel, model 779, is a sensory busy box designed for use by children with upper extremity or cognitive disabilities. Spin the wheel and stars and sparkles fly in the dome while music plays and bright lights shine. This toy is designed to encourage individuals to reach out to activate the lively show. POWER: Uses 4 C and 4 AA batteries. DIMENSIONS (HxW): 11 x 15 inches. WEIGHT: 6.5 inches.

Cosmo's Play And Learn Software

Cosmo's Play and Learn Software is a cause and effect training program designed for use by children with cognitive, neurological, or upper extremity disabilities. This software is intended for use with the Mission Control computer input device (see separate entry) and enables the child to control a virtual CosmoBot to explore and enjoy a virtual playground. The software helps users to target goals of literacy, cause and effect, attention to task, and verbal skills.

Counterbalanced Swivel Fork.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Fork and tray ensemble designed to enable a person with minimal upper extremity function to eat independently. Describes a plywood tray, with suction cups on the bottom to prevent slipping, which holds a scoop dish attached with velcro and a cutout circle for a glass; a fork with an extension allows it to swivel. The fork is fastened to the dish with a chain of rubber bands which acts to keep the fork parallel to the plate when it is in the plate and h

Cozy Coats Raincoat

The Cozy Coats Raincoat is a raincoat designed for use by individuals who use wheelchairs. This multi-season coat can be worn for warmth and wet-weather protection. Designed with a long front and a short back to prevent bunching behind the seated user, this raincoat has short sides that do not drag in wheels, ample pouch pockets with right- and left-hand access, and a cowl collar and hood without strings, hooks, buttons or straps. Other features include a waterproof Taslan outer layer and an ant

Cozy Coats Thumbless Mittens

The Cozy Coats Mittens are mittens designed for use by individuals with severe physical disabilities, or neurological or upper extremity disabilities. Made of double fleece fabric for warmth, these machine-washable mittens are reversible and have hook-and-loop fasteners. The mittens can be special ordered to match the Cozy Coat Winter Coat (see entry). SIZES: Small, medium, and large. COLORS: Navy/plaid, royal/fiesta, royal/snowstorm, wine/bouquet, periwinkle/splash, hunter/forest, and hunter/b

Cozy Coats Winter Coat

The Cozy Coats Winter Coat is a winter coat designed for use by individuals who use wheelchairs. Made with a double layer of anti-pill winter fleece and long in front and short in back, the coat provides full coverage without uncomfortable bunching in the back. The sides are short, and are designed not to drag in the wheels. Features include dropped shoulders and ample arm holes to accommodate users with limited flexibility, and a cowl collar with hood that does not require zippers, snaps, strin

Cozy Lap Blanket (Model 186)

The Cozy Lap Blanket, model 186, is a lap robe designed for use by men or women who use wheelchairs. This machine-washable lap blanket attaches around the waist with Velcro tabs. It is made of thermal, non-pill, hypo-allergenic, 100 percent polyester fleece. COLORS: Royal blue, charcoal gray, or purple.

Cozy Lap Blanket For Children (Model C186)

The Cozy Lap Blanket for Children, model C186, is a lap robe designed for use by children with mobility disabilities or spinal cord injury. This lap blanket attaches around the waist with Velcro tabs and is made from 100 percent polyester fleece. It is hypo-allergenic and machine washable. COLOR: Royal blue, charcoal gray, or purple.

Cravaat Bib

The Cravaat Bib is a bib designed for use by adults with eating, swallowing, upper extremity, or severe physical disabilities. Designed resemble a scarf, this waist length bib is made from brushed microfiber and has the soft feel of suede. The bib has a stylish look that is a discreet alternative to the adult bib. It is stain-resistant, wrinkle-free, and machine washable. DIMENSION (LxW): 27 x 8.5 inches. COLORS: Floral tan; brown/green print; tan faux leather; and black, brown, blue, burgundy,

Cravaat Ii Bib

The Cravaat II Bib is a bib designed for use by adults with eating, swallowing, upper extremity, or severe physical disabilities. Designed to resemble a scarf, this bib is full length and extends over the lap to catch crumbs. Made of 100 percent polyester, it is sewn together to keep closed and has a wide opening at the neck to allow it to fit easily over the head. The bib has a stylish look that is intended to be a discreet alternative to the adult bib. It is machine washable in cold water with

Cravaat Napkin At Your Neck

The Cravaat Napkin At Your Neck is a bib designed for use by adults with eating, swallowing, upper extremity, or severe physical disabilities. This bib is designed to resemble an oversized napkin tucked in at the neck to present a dignified alternative to the adult bib. The napkin extends from the neck over the lap to catch crumbs, and it stays in place by a strap that snaps around the neck. Made of polyester, it is stain- and wrinkle-resistant, machine washable and can be tumble dried. DIMENSIO

Crawl Along Snail

The Crawl Along Snail, model 1215, is a touch activated toy designed for use by children with severe physical or upper extremity disabilities or spinal cord injury. This toy snail in mounted on a tray for table top use to encourage swiping and reaching. Swiping at this smiley face snail causes it to move back and forth as it entertains users with lively music, dancing lights, and sounds. Users can lock the snail’s wheels and enjoy looking into the large mirror. POWER: Uses 2 AA batteries. DIMENS

Crawlabout Crawl Trainer

The Crawlabout Crawl Trainer is designed for children with neurological, physical, upper or lower extremity disabilities while instructing, encouraging and reinforcing crawling. The aluminum frame and foam-padded, suspended harness are height adjustable. Push handles can be attached as crawling skill progresses. The caregiver can steer from the rear to provide necessary assistance. SIZES: Small: Overall Width 23”, Overall Height 22-25", Overall Depth 18", Harness Width x Depth 12”, Harness Dept

Creature Capers

Creature Capers is a single switch program designed to improve attention skills and teach cause and effect, turn-taking, and switch use for individuals with developmental, cognitive, visual or physical disabilities or autism. Its benefits include increasing auditory and visual attention; training cause and effect and turn taking; developing intentionality; and offering recreational enjoyment. Users activate a single switch, touch screen, or the space bar to make "creatures" perform animated rout

Creature Cartoons

Creature Cartoons is a single switch program designed to improve attention skills and teach cause and effect, turn-taking, and switch use for individuals with developmental, cognitive, visual or physical disabilities or autism. Its benefits include increasing auditory and visual attention; training cause and effect and turn taking; developing intentionality; and offering recreational enjoyment. Users activate a single switch, touch screen, or the space bar to make the cartoon's story line contin

Creature Magic

Creature Magic is a single switch program designed to introduce early language and cognitive concepts, cause and effect, turn-taking and use of a single switch for individuals with developmental, physical or visual disabilities or autism. This program is designed to introduce early language concepts, provide exposure to word combinations, reinforce critical cognitive concepts and offer recreational enjoyment. There are four games which show the concept of non-existence where things disappear and

Credit Card Switch (Model 5580)

The Credit Card Switch, model 5580, is a touch switch designed for use by children and adults with upper extremity disabilities. As thin as a credit card, the switch is extremely sensitive and activates with the slightest touch. It can be used on any flat surface or it can be mounted on a wall and it is equipped with a plastic sleeve to hold a label. The set includes the switch, two plastic sleeves, and a set of labels, double-sided mounting tape, and Velcro for mounting. OPTIONS: A metal mounti

Creepster Crawler (Models Cr-1 & Cr-2)

The Creepster Crawler is a crawling trainer designed for use with children with neurological, physical, or lower extremity disabilities. This device consists of an aluminum frame on casters with an attached foam-padded harness that suspends the child in the four-point crawling position. The adjustable harness accommodates growth and allows for variability in the amount and distribution of weight bearing on the extremities. The front bars of the frame are padded for safety. The unit also has a pa

Crick Usb Switch Interface

The Crick USB Switch Interface is a computer switch adapter designed to make computers switch-operable for individuals with upper extremity disabilities or spinal cord injury. This switch interface works with almost all switch accessible software. It plugs directly into the computer's USB port and connecting switches. It will instantly work with Clicker, Cloze Pro, and All My Words 2 (not included) with no set up required. For other switch accessible software, this adapter comes with USB Keys, a

Crosom 12 Inch Manual Scooter Board With Ultra Glide Casters

These scooter boards are designed for children or individuals who have physical developmental disabilities to help users further their gross motor skills by sitting and moving around by pushing off the floor with their legs. High impact resistant. Allow movement in any direction. Grasp inside handles to protect fingers during play. MATERIALS: Molded polypropylene, nylon casters. DIMENSIONS: 12 inch Length x 12 inch Width. COLORS: Purple, Orange, Yellow, Green, Blue, or Red.

Cruise

Cruise is a mouse emulator designed for use by individuals with fine motor or severe physical disabilities or spinal cord injury. This device requires no hand or wrist movement. Users control the speed and direction of the cursor with a single, soft touch of a control ring. The programmable unit stores personal settings for automatic retrieval each time the computer is powered up. Designed to be plug-and-play for any computer with PS/2 or USB connection, the device features two switch input jack

Crystal Clear Switch

The Crystal Clear Switch is a touch switch designed for use by individuals with upper extremity disabilities. This round switch can be activated with the slightest pressure anyone on the surface. A clear screw-off top enables pictures or words to be mounted on the switch surface for cueing.

Crystal Crib

The Crystal Crib is a circle bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this metal crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has clear Plexiglas spindles, drop-side access, and a canopy assembly and includes a high-density foam mattress. OPTIONS: Bedding and linens watterproof pad, and ma

Cubewriter

CubeWriter is an on-screen keyboard, writing program, and language tutorial program designed for use by individuals with upper extremity, severe physical, or learning disabilities. This program can be used with a mouse, switch, touchscreen, alternative kebyboard, or regular keyboard. Features include the ability for each user to personalize word lists and choose personal settings to meet individual needs. Compatible with all text-based documents, this program also features three modes (Type, Wr

Cuddlebug

The CuddleBug is a stroller designed for use with children with mobility, neurological, or severe physical disabilities. This stroller offers tilt, full recline, and hi/lo capabilities and accepts two seating modules to accommodate growth. The unit folds for transportation and storage without removing the seating module. The unit offers 5 to 30 degrees of adjustable tilt and 90 to 160 degrees of adjustable recline. Standard features include a height-adjustable push handle; a padded seat insert w

Cup Holder

DO IT YOURSELF PURPOSE: To provide powered wheelchair users with the ability to carry beverages. A cup holder designed to clamp to an automotive air vent can be adapted for use on a wheelchair. Zip ties can be used to secure the holder squarely to the frame where it works best for the user. TITLE: Cup Holder. REF: http://www.wheelchairmodifications.org. The organization can also be reached at Wheelchair Modifications, 5533 A Pony Farm Drive, Richmond, VA 23227.

Cup Holder

The Cup Holder is a wheelchair cup, glass, mug, or can holder designed to allow individuals who do not have the use of their hands to drink through a straw from his/her own cup without assistance. The plastic adjustable cup cradle is fixed to the top of a 10 mm stainless steel rod. The rod is mounted onto the wheelchair arm with a plastic connector. The cradle has two openings on either side for a mug handle and will accommodate a wide variety of drinking containers, allowing the user to use a p

Cup Holder 1

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with quadriplegia to drink independently. This cup holder is made using a flexible gooseneck microphone stand with fittings at each end, a machined clamp that fits the wheelchair armrest, a piece of black PVC drain collar, and fence wire. The PVC collar has a notch cut into the side of it to hold a thermal coffee cup, and a wire cage was added below to hold most juice bottles and soda cans. A piece of fencing wire is placed inside the go

Cup Switch (Model 58080)

The Cup Switch, model 58080, is a buttonswitch designed for individuals with upper extremity disabilities who have a good ability to target smaller surfaces. This switch is similar to the Cap Switch (see separate entry), but more durable because the switch is encased in a plastic cup. Colored stickers for the target area are included for individuals with low vision. The base provides a surface for mounting on a table, pillow, or wheelchair bracket. The switch is activated using nine ounces of fo

Curbside Voting Sign (Model Sg-103F)

The Curbside Voting Sign, model SG-103F, is an access sign designed for use to direct voters with disabilities to an accessible voting location or polling place. The sign features the International Access Symbol (a stylized drawing of an individual in a wheelchair) with the word "CURBSIDE" above the symbol and the word "VOTING" below. It is made from corrugated plastic for all weather conditions and attaches to the Corrugated A-Frame (SG-F) which is sold separately. DIMENSIONS (HxW): Sign face i

Curling Guide

CUSTOM ADAPTATION PURPOSE: To provide a customized adaptation to enable individuals who use powered wheelchairs to participate in curling (a game similar to shuffleboard). Since one hand was required to control the speed and direction of the wheelchair, this left the players only one hand with which to control the push rod and rock when two hands are required. The Curling Guide allows users to finely aim and control the forward motion of the rock. The guides are a quick connect/disconnect to th

Cushion Ease Side Rail Pads (Models 6013363, 6013365 & 6013663)

The Cushion Ease Side Rail Pads, models 6013363, 6013365 and 6013663) are side rail pads designed for use by individuals with physical disabilities. The pads' pressure relieving foam helps protect the user from hard side rails and reduces gaps between the bed-rails and mattress. Each pad has a Staph-Chek vinyl cover, and it is antimicrobial, flame- and stain-resistant and easily cleaned. The pads can be used with standard or swing-down bed rails, and they attach to the top rail using hook-and-lo

Cushion-It: Medical Sheepskin Wheelchair Pad

The Cushion-it: Medical Sheepskin Wheelchair Pad is a wheelchair seat cover designed for use by individuals at risk for pressure sores/ulcers. Machine washable and urine resistant, this Australian Medical Sheepskin pad can also beused as a back pad and reduces pressure and absorbs perspiration. The HiTemp UR Australian Medical Sheepskin Pads are held securely in place by straps with Velcro adjustment and closure. The leather of these sheepskins is perforated by an array of small holes to facilit

Custom Bath Seat

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted bath seat for an individual with multiple sclerosis. After falling in the shower, this individual determined she needed some way of stabilizing herself when using her over-bath shower. Various devices suggested by her physical therapist provided to be unsuitable for the older-style bath that has a narrow lip on the wall side. A customized bath seat, which the individual could transfer on and off independently and was remova

Custom Chair

CUSTOM ADAPTATION PURPOSE: To accommodate a child's disabilities to improve upper body range of motion and overall independence. The chair was built to the style of a supplied model. Features include a slightly reclined back, side panels, a drop-away pommel at the front of the seat plate, provision for fitting a pelvic positioning belt, and a footplate with footcups. TITLE: Successful Projects in Brief: Chair for Boy in Special School. JOURNAL: TAD Journal. REF: Vol 23 no 1, Autumn 2003: p.19

Custom Solution Comfort Seat (Model Scs-Cust)

The Custom Solution ComfortSeat, model SCS-CUST, is a custom-built personal cleansing system designed for individuals with mobility, balance, upper ectremity, or neurological disabilities, spinal cord injury, or arthritis. The device installs on the toilet, replacing the seat. This model can be configured for the individual's special needs. The customized controls include the choice of a left or right control lever, back controls, or wired remote control. Features include an adjustable rear was

Custom-Designed Shower Chair

CUSTOM ADAPTATIONPURPOSE: To enable caregiver -assisted showering of an adult with severe multiple disabilities. This individual is unable to sit independently and cannot use a conventional shower chair due to scoliosis and hip positioning issues. The chair was built with the narrowest possible width to accommodate maneuvering in narrow areas of the home. This chair has a 22 millimeter zinc-dipped, powder-coated steel tube frame with triangular struts for added durability and stability. Caster w

Customized Double Sized Bed

CUSTOM ADAPTATION PURPOSE: To provide a customized bed for children with multiple disabilities. The customized bed was created for twin boys who have multiple disabilities including cerebral palsy, epilepsy, developmental delays, and vision and hearing disabilities. Caregivers wanted the two boys to be able to have shared sleeping arrangements due to the therapeutic benefits seen as a result of the boys' emotional bond. Additionally, the customized bed was to be placed in a family room rather t

Customized Electronic Stroller

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized electronic wheelchair (herein referred to as stroller) for a 10-year-old boy who has spinal muscular atrophy. Due to the nature of his condition, the child prefers to remain horizontally positioned, and the stroller design accommodated that. The electronic stroller can be manually pushed or controlled electronically. The user interface for the electronic controls includes a single touch button that the user can press whenever t

Customized Game Controller

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with upper extremity paralysis to operate a video game controller. The controller is fused onto a plastic base, the underside of which is coated with a non-slip material so that when placed flat surface for use, the controller stays pointed at the TV. A lever is fastened to the front of the base on each side for use in activating the forward facing horizontal buttons. The levers are activated by a vertical motion down on levers just below

Cylinder Rack (Model De-1-W)

The cylinder rack is a cylinder cart for wheelchair that fits on back of wheelchair attached with small wrench Nylon screw on holding ring secures cylinder in place. It holds D or E cylinders and has bright chrome plating. Does not interfere with operation of chair. (IV Pole not included).

Cymouse

Cymouse is a head operated video game controller designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This control unit allows the user to reassign key functions to slight head motions. It is a five-axis game controller that can be manipulated with the user's head. The unit does not replace the mouse, but can be used as a supplement, giving the user more control over the game. It uses infrared light and math to determine the user's head posi

D.I.Y. Lamp Switch For Dogs

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: This DIY product is specially designed for people who use trained service dogs to help them in daily life. The problem was that the service dog could not push the button very well, therefore this lever system was the solution. Another advantage of this specific product is that it can be used by service dogs, people who use a wheelchairs and older people. MATERIALS USED: Strong wooden plates (we used multiplex) thickness: 6millimeter; surface: 1x 450mil

D.I.Y. Toy Bar/Gym

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To allow children with cortical blindness MATERIALS USED: 2 right angles, 3 opening 1 inch diameter “T” connectors, 4 right angles, 2 opening 1 inch diameter “elbow” connectors, 4 right angles, 3 opening 1 inch diameter “corner” connectors, Nine 2 foot long pieces of 1 inch diameter PVC piping**, Four 1 foot long pieces of 1 inch diameter PVC piping**, Elastic bands (typical white elastic bands, found at fabric and arts & crafts stores), Toy rings,

Dado Express Pocket Door

The Dad0 Express Pocket Door is a motorized space saving door designed for use by individuals with mobility or severe disabilities or spinal cord injury. This modernized pocket door uses tempered Starphire glass and features a patented motorized system with advanced motion control. The glass door lies flush with any finished wall. The system features a pre-fabricated pocket door frame, a precision silent track, micro-processor controlled operation, and glass touch panels. Using a sensor, a maste

Daessy Folding Mount

The Daessy Folding Mount is a wheelchair mounting system for communication devices. The unit provides a solid, stable platform that can be adjusted to meet the positioning needs of each individual. The communication device and platform can be rotated down and out of the way beside the wheelchair to permit close-in positioning to a desk or table. Models are available for 7/8-inch tubing, .75-inch tubing, and 1-inch tubing, all in a choice of 6- and 12-inch offset.

Daily-Weigh Scale (Model Sr255)

The Daily-Weigh Scale, model SR255, is a digital hydraulic lift scale designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The scale has a wheeled base, a hydraulic lifting mechanism, and a tray on which the person to be weighed lies. Weight readings are displayed in pounds or kilograms on a 16-character liquid crystal digital display (LCD). The unit also has auto power shut down. POWER: Uses six D cell alkaline batteries and is equipped with a low

Dalmation (Model 512)

The Dalmatian, model 512, is a switch operated toy designed for use by children with severe physical or upper extremity disabilities. When a connected capability switch (not included) is activated the puppy barks and wags its tail. POWER: Requires capability switch and 2 AA batteries. DIMENSIONS (HXL): 6 x 7.5 inches. WEIGHT: 1 pound. COLOR: White with black polka dots.

Danika Vest

The Danika Vest is a women’s vest designed for use by women who use wheelchairs or who have difficulty dressing. This sleeveless cardigan vest features a halter neckline and razorback details giving the top oversized arm holes that make it easy to put on or take off, and front snaps that allow the vest to be worn open or closed. When worn closed, the vest gives the appearance a v-neckline and the cardigan drapes across the body for a slimmer look. This vest also has a large back opening for eas

Darci Too

DARCI TOO is a keyboard emulator designed for use by individuals with upper extremity or severe physical disabilities. This device can be controlled by joysticks, switches, matrix keyboards, or communication aids and supplies Morse Code, scanning, matrix keyboard, Darci Code, and communication aid access to all computer functions.The input device is selected by a setup menu which is displayed on DARCI TOO's display panel. Input devices are connected to one of the three input connectors. Setup ro

Day Cruiser Mini Pack

The Day Cruiser Mini Pack is a wheelchair side or legrest pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made from water-resistant heavy-duty Cordura with a full lining, this pack attaches to the armrest or legrest of a wheelchair with two Velcro straps, which are sewn on the back of the unit. It can also be worn around the user's neck. The pack has two compartments, an adjustable neck strap, and a sewn-on elastic loop on the side to carry glasses or a pe

Day Cruiser Wheelchair Bag

The Day Cruiser Wheelchair Bag is a wheelchair back pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made from water resistant heavy-duty Cordura with a full lining, this backpack attaches to most wheelchairs with or without push handles with two adjustable straps. The backpack has two compartments, a large main area with Velcro flap closure and an expandable zippered front pocket for smaller items. Power chair users must have handles to attach the bag. DIM

Deep Penetrating Infrared Lifght (Dpl)

This Deep-Penetrating Infrared Light (DPL) is designed for individuals with arthritis or fibromyalgia or any disability which causes poor circulation or tight muscles and/or achy joints. Stimulates cellular regeneration and activates endorphins which block pain-transmitting chemicals or nerves. Can replenish skin cells and stimulate the formation of elastin, a regenerating protein, and collagen, a structural protein/connective tissue. Not intended to diagnosed, treat, curve, or prevent any disea

Delta Ultra Light 1000 Full-Electric Bed (Model 15033)

The Delta Ultra Light 1000 Full-Electric Bed, model 15033, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards and

Delta Ultra Light 1000 Full-Electric Low Bed (Model 15035)

The Delta Ultra Light 1000 Full-Electric Low Bed, model 15035, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards

Delta Ultra Light 1000 Semi-Electric Bed (Model 15030)

The Delta Ultra Light 1000 Semi-Electric Bed, model 15030, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards and

Deluxe Adjustable Bath Bench With Red Safety Handle (Models 9100 & 9120)

The Deluxe Adjustable Bath Bench With Red Handle is a bath seat designed for use by individuals with mobility, balance, and cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a contoured back which slides into seat, the bench has a hard plastic seat and back with multiple drainage holes. The safety handle provides support and balance assistance when entering and exiting the tub. The handle can be attached to eaither side and additional handles can b

Deluxe Bariatric Commode (Model 16B306A)

The Deluxe Bariatric Commode, model 16B306A, is designed for use by individuals with mobility disabilities. The welded frame of this commode is constructed of one-inch steel tubing that is zinc plated and powder coated for durability. Features include an extra-large seat, complete pail, and the ability to fit over most toilets. DIMENSIONS (LxW): 18.5 x 27.75 inches. The height under the seat adjusts from 17.5 to 21.5 inches; the seat height is 22 inches. The width between the arms is 25.5 inches

Deluxe Bed Shampoo Kit (Model C1202)

The Deluxe Bed Shampoo Kit, model C1202, is a shampoo basin designed for use in washing the hair of people with severe physical disabilities in bed. The set features an Inflatable Shampooer with a contoured neck rest and drain and an eight-quart plastic basin. The Inflatable Shampooer, model C1201, is also sold separately.

Deluxe Commode

The Deluxe Commode is a height-adjustable commode designed for use by individuals with severe physical disabilities. The removable back allows for placement over the toilet for use as a raised toilet seat or safety frame. This commode is equipped with padded armrests, skid-resistant rubber tips, a removable commode bucket with lid and a splash guard. The pail capacity is nine quarts. DIMENSIONS (HxDxW): 28.5 x 21.75 x 23.5 inches. The width between the arms is 19.75 inches. The seat height adjus

Deluxe Convalescent Recliner

The Deluxe Convalescent Recliner is a recliner chair designed for use by individuals who require support while sitting. This chair can be adjusted and locked in three positions: upright, with the footrest elevated, and fully reclined. It has a high back headrest, padded arms, and oversized casters. The large, molded plastic tray attaches to the arms, slide ajusts, and can be stored on the chair back. The cushions are covered in mildew resistant vinyl. A built-in moisture barrier prevents seepage

Deluxe Down-Under (Model Wh175) & Junior Down-Under (Model Wh175J)

The Deluxe Down-Under WH175 and the Junior Down-Under WH175J are removable under seat pockets designed for use by wheelchairs users. The bags have one main compartment and an additional outside pocket suitable for carrying a checkbook, wallet, small book, wheelchair tools etc. The pockets have zip closures with large pull rings. The Junior Down- Under is sized for small chairs. DIMENSIONS (WxHxD): Deluxe Down-Under - 11x7x3 inches; Junior Down-Under is 9x7x3 inches. COLOR: All black or black wit

Deluxe Folding Personal Worktable

The Deluxe Folding Personal Worktable is a height adjustable tilt top worktable designed for use by individuals who use wheelchairs. This table is height- and tilt-adjustable and hand knobs adjust and secure its telescoping legs. The top tilts from 0 to 45 degrees. The scratch-resistant melamine top has a half-moon cutout for accessibility and an outer rim to protect against spills. The table folds flat for storage. DIMENSIONS: Table height adjusts from 29 to 44 inches. The tabletop measures

Deluxe Footswitch (Models 81-S, 81-Sc36, 84-S, & 85-S)

Foot operated, 1 or 2 stage momentary, or latching switch. Cast aluminum cover has parabolic curve allowing easy operation with low or high heels. POWER: 10 amps, 125 to 250 volt AC, 1/2 horsepower. DIMENSIONS: 5.5 x 4.75 x 1.75 inches. WEIGHT: 1 pound.

Deluxe Ii Footswitch (Models 68-S2, 68-S3, 68-S3N, & 68-S4N)

Foot operated 2 or 3 pedal momentary switches. High impact plastic cover tapers close to floor and has metal treadle bars at each side. Allows use of up to 4 basic spdt snap switches that can be utilized in a number of combinations. POWER: 10 amps, 125 to 250 volt AC, 1/2 horsepower. DIMENSIONS: 5 5/8 x 6 7/8 x 1.75 inches. WEIGHT: 2 pounds.

Deluxe Padded Bathtub Transfer Bench With Full Seat

The Deluxe Padded Bathtub Transfer Bench with Full Seat is a transfer bench designed for use by individuals with mobility and balance disabilities. The height-adjustable padded vinyl seat resists tearing. The seat is equipped with a side rail to provide support during transfers. DIMENSIONS (HxDxW): 31 x 22 x 29 inches to top of back. The height adjusts from 18 to 22 inches in 0.75-inch increments. CAPACITY: 300 pounds. WEIGHT: 13 pounds, 4 ounces. COLOR: White.

Deluxe Pontoon Style Bed Pan

The Deluxe Pontoon Style Bed Pan is designed for use by individuals with severe physical or mobility disabilities. Made of strong polypropylene, this bed pan is easy to clean and contoured for comfort.

Deluxe Prism Glasses (Model A18002)

Deluxe Prism Glasses, model A18002, are prism glasses designed for use by individuals with severe physical disabilities or spinal cord injury. The prism allows the user to see at a 90 degree angle, enabling the user to read in bed or watch TV while lying flat. A propped-up book can be read while the user's head is flat on a pillow. The glasses can also be used for reading during an MRI scan. The streamlined frame fits over regular glasses. These glasses are latex free and come with a protective

Deluxe Prism Glasses (Model Nc28841)

Deluxe Prism Glasses, model NC28841, are prism glasses designed for use by individuals with severe physical disabilities or spinal cord injury. These non-magnifying glasses have a prism that turns the image 90 degrees so that no head movement is necessary while reading or watching television. These glasses come with a vinyl carrying case.

Deluxe Transfer Bench With Back (Model 9070)

The Deluxe Transfer Bench with Back, model 9070, is designed for use by individuals with mobility disabilities, balance disabilities and cognitive disabilities who have difficulty standing in a tub or shower. The bench extends over the side of the tub, allowing the individual to sit and slide into the tub without having to step over the side. The bench has an anodized aluminum frame with a hard plastic seat and back. It adjusts to left- or right-side tub entry by placing the back on either side.

Deluxe Turtle Therapy System (Models 2882 & 2883S )

The Deluxe Turtle Therapy System, model 2882. and 2883S is a complete system designed for vestibular stimulation and sensory integration therapy. The system, model 2882, consists of the Turtle dome, a padded scooter, T-stool leg attachment, net swing with rope and ascender, therapy record booklet, and complete Turtle Methods Manual. All components of the systems fit into the Turtle dome for storage. Model 2883S includes the padded scooter and T-stool leg attachment only.

Deluxe Wheelchair Tray (Models H1200 & H1201)

The Deluxe Wheelchair Tray is a lapboard designed for use by individuals who use wheelchairs. The wooden tray features extra-wide, screwed-in straps for attaching the tray to the wheelchair armrests, a rounded torso cutout, and a raised lip to prevent items from falling off. DIMENSIONS (WxD): 25 x 22 inches. COLOR: Model H1200 is butternut and model H1201 is rosewood.

Deluxe Wooden Bookchair

The Deluxe Wooden Bookchair is a bookholder designed for use by individuals with upper extremity disabilities or arthritis. Made of hand-finished rubberwood with a cotton cloth support, the unit adjusts to three different angles and folds flat when not in use. Pages are held in place with unobtrusive pegs, which extend outwards for extra-thick books. SIZES: Mini, medium, standard, and big.DIMENSIONS(WxHxD): The mini model is 5 x 5.75 x 0.75 inches; the medium model is 6.333 x 9.5 x 1.25 inches;

Denim Jeans (Model 017)

Denim Jeans, model 017, are women’s jeans designed for use by individuals with catheters, mobility disabilities, spinal cord injury, or those who have difficulty dressing. Available lined or unlined, these stretch jeans are designed for ease in sitting as the material contours to the curve of the body. Features include topstitching detail with a long rise and inseam, a 4-inch invisible zipper (available on the right or left side) to accommodate catheter tubing should the wearer choose to wear ca

Designer Embroidery Bibs For Women

The Designer Embroidery Bibs for Women are bibs designed for use by women with eating, swallowing, upper extremity, or severe physical disabilities. Made of cotton and polyester blend, these bibs have two layers of terry cloth sewn together with a plain white back and embroidered front. The embroidery work is not seen from the back side. Features include hook and loop neck closure. The bibs are machine wash and dry. DIMENSIONS: (LxW): 30 x 18 inches.

Desk Quarium (Model 3282)

The Desk Quarium, model 3282, is a switch operated toy designed for use by children with upper extremity or severe physical disabilities or spinal cord injury. This illuminated unit features brightly-colored swimming fish. Activating a connected capability switch (not included)causes the fish to swim about in the mini aquarium. The unit also works by placing pens and pencils in the upper cup on the touch sensor. POWER: Uses 2 AA batteries. DIMENSIONS: 5.25 x 4.5 x 4.5 inches.

Device To Access Swimming Pool

CUSTOM ADAPTATION PURPOSE: To provide swimming pool access for a person with intellectual and physical disabilities. A 24-volt solar-charged pool hoist from Australian manufacturer Wymo was chosen for this adaptation. However, when lowered into the pool using the hoist, the user needed to be supported while she was removed from the sling. She also needed support during the reverse process of putting the sling back on when she was being taken out. A “landing bay” was made in the pool for the ind

Diamond Homecare Bed

The Diamond Homecare Bed is a motorized bed designed for use by individuals with obesity and severe physical or mobility disabilities or spinal cord injury. This bed is available in semi-electric and full electric models with Trendelenburg, Reverse Trelenburg, and cardio-chair positions. The bed has two electric drive modules and is equipped with a manual emergency crank and a hand control. The bed deck is thermoformed plastic. The frame splits in half for transportation and assembly and has fou

Dice Tosser, The

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with upper extremity disabilities to play games requiring dice throws. A wooden box was built with a circuit, a single solenoid, a plug-in 1/8-inch jack receptacle, and a battery. The dice are placed on the small circular platform. The solenoid, when activated by a pressure switch, pops up and the dice are randomly tossed. TITLE: The Dice Tosser. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/dice1.htm. REF: Th

Diestco Armrest Front Bag

The Diestco Armrest Front Bag is a caddy for a scooter or powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This large basketball-shaped and sized bag mounts to the end of armrests with the included straps and is detachable when not in use. Made of water-resistant nylon, this bag has a lightweight aluminum frame to retain the shape and a zippered top cover. DIMENSIONS: 7 inches high x 12 inches in diameter.

Diestco Armrest Pocket

The Diestco Armrest Pocket is a wheelchair side pocket designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Made of waterproof nylon, the pocket attaches to the wheelchair armrest with the included straps. DIMENSIONS: 11 x 5 x 3 inches.

Diestco Deluxe Armrest Saddle Bag (Model B2121)

The Diestco Deluxe Armrest Saddle Bag, model B2121, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch can be mounted on the inside or outside of an armrest on a scooter or wheelchair. This pouch has one flap-covered main compartment, side pockets, a zippered interior pocket, and two small outside pockets for a cell phone or glasses. DIMENSIONS(WxLxD): 10 x 8 x 3 inch

Diestco Deluxe Seatback Bag

The Diestco Deluxe Seatback Wheelchair Bag is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has several pockets, including a back mesh pocket, a zippered back pocket, side pockets, and

Diestco Extra Large Armrest Saddle Bag (Model 2131)

The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a front zippered pocket, mesh pockets in front and on the sides, an inside pocket, side loops, and a secret pocket. DIMENSIONS(WxLxD): 12 x 16 x 2 inches.

Diestco Fabric Oxygen Tank Holder (Models B6211 & 6311)

The Diestco Fabric Oxygen Tank Holder is a oxygen cylinder carrying case designed for use by individuals with mobility and respiratory disabilities. Made of water-resistant nylon, this case attaches to wheelchairs and scooters with hook-and-loop straps. Model B6211 is designed for use on scooters with captain-style seats or powered wheelchairs without push handles. Model B6311 is designed for manual and transport wheelchairs with push handles.

Diestco Large Armrest Saddle Bag (Model B2125)

The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a variety of pockets and compartments. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.

Diestco Mid-Range Seatback Bag (Model B1117)

The Diestco Deluxe Seatback Wheelchair Bag, model B1117, is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has several pockets, including a back mesh pocket, a zippered back pocket, and

Diestco Monster Seatback Bag (Model B1113)

The Diestco Monster Seatback Bag, model B1113, is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has a lightweight aluminum frame to keep it open. DIMENSIONS(WxLxD): 13 x 18 x 10 inches.

Diestco Standard Seatback Wheelchair Bag

The Diestco Standard Seatback Wheelchair Bag is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag has a zippered top. DIMENSIONS: 12 x 12 x 3 inches.

Diestco Universal Cup Holder

The Dietsco Universal Cup Holder is a wheelchair drink holder designed for use by individuals with mobility disabilities or spinal cord injury. This holder attaches to the wheelchair or scooter armrest with the included mounting hardware.

Digital Door Viewer

The Digital Door Viewer is a visual security system designed for use by individuals with physical or visual disabilities. The device is designed to allow the user to see who is outside their door without having to stand or to position their face against the door. Features include a color digital camera and large liquid crystal display (LCD) distortion-free display monitor. The system is operated by pressing a large, clearly marked button. Installation (installation kit included) requires no ext

Digital Home

Digital Home is a voice input and output environmental control unit designed for use by peoples with a a variety of disabilities, including wheelchair users and people with severe physical disabilities. It has built in independent voice recognition, and enables the user to control home lighting and appliances with verbal commands. The system responds to the user's voice by speaking back and confirming the verbal commands over a home theater system or stereo system, if such a system is connected.

Digital Wheelchair Scale (Model Mph072241)

The Digital Wheelchair Scale, model MPH072241, is a digital wheelchair scale designed for use by individuals with mobility disabilities or spinal cord injury. This scale has a non-skid platform with ramp to accommdate users in wheelchairs or straight leg chairs, as well as ambulatory users. Other features include vertical fold-up and heavy-duty wheels for storage and transport. The scale is accurate to 0.2 pounds. POWER: Uses battery. DIMENSIONS (LxW): 28 x 32 inches. CAPACITY: 800 pounds.

Digivoice

Digivoice is a driving control system designed for use by individuals with upper extremity disabilities. This system allows voice operation of up to 16 vehicle controls such as shifter functions, turn signals, horn, headlight dimmer, and wipers. The driver touches a single telco-style ACT switch (not included) to activate the system. When the switch is depressed, the system says "READY" and the driver speaks the name of the desired function into the supplied microphone. The function is then acti

Dining Bibs

The Dining Bibs are adult bibs designed for use by individuals with eating, swallowing, and upper extremity disabilities. These bibs are offered in a variety of fabrics and styles from fancy wear to picnic wear and all are laminated or vinyl covered, and features Velcro closure at the neck and a crumb catcher pocket at the bottom. Styles include men's wear with a matching cumber bund crumb catcher pocket; women's wear with a metallic background, clear pocket, and lace trim. DIMENSIONS (LxW): 27

Dining Smock

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with upper extremity disabilities or tremors, arthritis, or grasping, eating, swallowing, or fine motor disabilities to eat without soiling clothing. Included in a chapter entitled "Kitchen & Meal Time," this article provides a pattern, detailed instructions, and illustrations for making a dining smock from a used shirt or blouse one size larger than the wearer’s usual size. The shirt is buttoned closed in the front and cut open down the bac

Dipsy Switch

The Dipsy Switch is a motion sensitive switch designed for use by individuals with severe physical disabilities or spinal cord injury. This tilt-sensitive switch can be attached to the head, arm, finger or any appropriate object and can be activated by body movements such as tilting the head forward, tilting the head back, or lifting a finger. It can also be attached to objects such as a rocking chair. The switch is activated by a 30-degree tilt to limit false activation. It can also be adjusted

Disc Switch (Model 3265)

A heavy duty single switch type actuator provides both tactile and auditory feedback. The switch is oeprated by applying pressure to its 1 3/4 inch dimater cap. Operating pressure varies between 9 ounces when pressed at its center to 4 ounces when pressed at its edge.

Disco Bus (Model 1431)

The Disco Bus, model 1431, is a switch-operated toy designed for use by children with upper extremity or severe physical disabilities or spinal cord injury. It is designed to increase a child's visual attention. This toy double-decker bus connects to an external switch (not included), such as a capability switch, through a .125-inch jack. Once the switch is activated, it moves about and plays music while flashing its colorful LED lights. POWER: Uses 3 AA batteries (not included). DIMENSIONS (HxL

Discover:board

The Discover:Board is a keyboard interface designed for use by children and adults with upper extremity, visual, or cognitive disabilities. This voice output keyboard speaks letters, words, or sentences to provide auditory feedback and can be used with such applications as ClarisWorks, Co:Writer, Write:OutLoud, Speaking Dynamically, and the Internet. The set includes the large membrane keyboard, four keyboard overlays, overlay creation software, support for a variety of programs, text entry capa

Discover:ke:nx Evaluation Set

The Discover:Ke:nx Evaluation Set is a keyboard interface kit designed to offer a wide range of computer access features for multiple users with physical disabilities. The package includes Ke:nx, PCA Checklist, Big:Calc, Kids in Action Icon Gallery, Key Largo, Macintosh TouchWindow; KeyGuard 128 for Key Largo, DJ (Don Johnston) Switch Kit, and Write:Outloud (see also separate entries). COMPATIBILITY: For use on Macintosh computers. SYSTEM REQUIREMENTS: ADB port, hard drive, 8 megabytes RAM, an

Discover:kenx

Discover:Kenx (pronounced "connects") is a keyboard interface designed to enable individuals with upper extremity, severe physical, or cognitive disabilities to access a computer using a choice of methods other than a standard keyboard. This device plugs directly into the keyboard port and enables customization for multiple users; the system remembers user preferences and automatically selects the appropriate set-ups. For example, one or two switches can be connected for scanning access, Key La

Discover:switch

The Discover:Switch is a single-switch keyboard modification and on-screen keyboard program designed to enable children with physical disabilities to access popular educational software. The voice-output switch enables students to use educational software, send e-mail, and operate multimedia programs. The switch includes all necessary software to enable it to display and speak a standard keyboard layout or to display and speak words, phrases, or sentences displayed in a keyboard-style matrix. Wi

Disposabib

The Disposabib is a plastic bib designed for use by individuals with swallowing, eating, or upper extremity disabilities. The bib ties at the neck and has a food catch pocket at the bottom. DIMENSIONS (LxW): 15.5 x 16 inches.

Disposable Clothing Protectors

The Disposable Clothing Protectors are bibs designed for use by individuals with eating, grasping, fine motor, neurological or upper extremity disabilities as well as people with excessive drooling. Designed for easy application and removal, these disposable peel-and-stick bibs have an adhesive on the back. Each bib covers the chest and waist and feature a fold-out pocket to catch crumbs. These absorbent, waterproof and leakproof protectors offer protection similar to standard cloth bibs without

Diy Adjustable Tray

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself adjustable tray for a child with severe disabilities to use drawing, coloring, etc. This DIY tray is a PVC frame with a leg in the middle to allow for angle adjustment. The tray is created from a piece of shower board which is cut to the size needed. The child is then measured and a cutout added to go around the child. The PVC frame is a little smaller than the tray itself and is attached to the tray using Velcro. A drill an

Diy Child Sensory Board

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself sensory board for a child with severe disabilities. This simple DIY project is designed to fit into a child’s lap or on a wheelchair tray so that at any time the child is touching a different texture. A piece of foam board was used as the base and can be cut to whatever size desired. Different textured items were then glued onto to the foam board. Any textured items or sensory toys can be attached. For this project they chos

DIY The EyeWriter 2.0

The Eyewriter 2.0 is a low-cost eye-tracking apparatus and custom software that allows graffiti writers and artists with paralysis as a result of Spinal Cord Injury (SCI) or Amyotrophic Lateral Sclerosis (ALS)  to draw using only their eyes.

Dj Switch Kit (Model B12)

DJ Switch Kit, model B12, is a rocker and touch switch kit designed to provide access to computers, toys and other communication devices for persons with physical disabilities. They are designed to meet a variety of physical and mounting needs. The kit contains the Ellipse 3 (no. 707), the L.T. Switch (no. 705), the BASS Switch (no. 745) and the Mounting Switch (no. 766) (see separate entries). The Ellipse 3 responds to one to three ounces of pressure; the L.T. responds to .75 ounce pressure; th

Dodge Discs (Model 7376)

Dodge Discs, model 7376, is a battery-operated toy designed for use by children with severe physical or upper extremity disabilities. This toy comes with 40 discs, a launcher, a metallic paddle or handle, and a speed adjustment control device. The user loads 10 discs and pushes down on the metallic paddle or grasps the black handle. The discs then shoot across the room. The launcher is on a lazy Susan to allow more aim control, and the speed adjustment device controls how fast the discs are rele

Dog On Skate (Model 3908)

The Dog on Skate, model 3908, is a battery-operated toy designed for use by children with severe physical disabilities. Squeezing a designated spot on the dog's paw plays music and the dog races around on its skateboard for visual tracking. POWER: Uses three AA batteries (not included). DIMENSIONS (HxW): 12 x 5 inches.

Dolphin Bath Seat (Model Do 2000)

The Dolphin Bath Seat, model DO 2000, is a child's bath seat designed for use by children with severe physical, neurological, balance, or mobility disabilities or spinal cord injury. This seat fits all standard tubs and has a folding aluminum frame upholstered with quick-drying mesh fabric. The chair is length adjustable and the seat and back adjust independently, with the back support offering 10 angle positions, including trendelenberg. The seat is depth-adjustable and offers five tilt positio

Donning Shoe Stand

Donning shoes is a stand design that can be done at home to help people with physical and cognitive disabilities, Hemiplegia, hip problems, and other related disabilities. The stand helps to elevated the shoe so that the user can independently put it on, tie it, or tighten it. It is built like a store stool with a triangular center for precision and stability. To make, start with foam with a shallow channel in the center. Then insert and glue a loop of webbing to make the device easy to pick up

Doodlebug Insert (Model 1065)

The Doodlebug Insert, model 1065, is a back support cushion designed for use with Kay Kinder Chairs (see separate entry, as well as other positioning chairs and high chairs. This terry cloth covered foam support also reduces the width and depth of the chair, enabling it to be used by smaller children. The cover can be unzipped and remove for washing. COLOR: Red or light blue.

Door / Window Access Transmitter

The Door/Window Access Transmitter is a security system designed for use by individuals who are deaf or hard of hearing. The system comprises two small magnetic contact bars and a transmitter. When the door or window to which the bars are attached is opened, the bars lose magnetic contact, triggering the transmitter.

Door Knob Helper (Model 640-8114-0200)

The Door Knob Helper, model 640-8114-0200, is a door handle lever designed for use by individuals with grasping or upper extremity disabilities, arthritis, or other wrist or hand pain. The lever device is constructed of rubber and fits over most standard round door knobs. It is designed to eliminate turning or twisting of wrists and hands by enabling the user to press down on the lever to open a door.

Double Cheek Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Double cheek switch can activate two toys or other devices at the same time teaching the child to discriminate or make choices between two activities. Touch switch rests on child's chest and is tied in place. One loop of a wire coat hanger is placed on either side of the child's head. By moving the head from side to side, the child can activate one switch or the other with the cheek. Includes diagrams. SKILLS REQUIRED: Soldering. AUTHOR: Burkhart, L J

Double Directional Head Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Head operated switch which turns on if head is held upright and off if the head tilts too far forward or back, to encourage a child to keep her/his head in an upright position. Materials include 2 glass mercury switches, 4 feet of 2 conductor, 22 gauge stranded wire, a subminiature size plug, a strip of cardboard, soldering iron, and hot melt glue with applicator gun. Describes and diagrams construction of the switch. The switch may be attatched to the

Double Double Mittens (Models 182 To 186)

Double Double Mittens are mittens designed for use by individuals with upper extremity, neurological, or severe physical disabilities, contractures of the hand, or spinal cord injury. These mittens are waterproof and cover from the wrist to fingertips. The no-thumb design enables them to slide on over the hand from the side. Made of 200 weight Polartec fleece, these mittens zip up the side and have elastic at the wrist. DIMENSIONS: Model 182 is 5 inches long from wrist to fingertips. Model 183 i

Double Tube Lift-Off Mounting Kit (Models 3613 & 3613-01)

The Double Tube Lift-off Mounting Kit is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair. The Kit consists of a Double Tube Lift-Off Mounting Plate, two 90-degree Vertical Tubes, and four 2 Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Double Tube Mounting Kit (Models 3603, 3603-01)

The Double Tube Mounting Kit is designed to attach the headrest, the occipital ring, and their Interface hardware to the back of a wheelchair. The Kit consists of a Double Tube Mounting Plate, two 90-degree Vertical Tubes, and four 2-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Double Weight Bearing Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Weight bearing switch consisting of side by side platforms which must by pressed together to activate a toy or tape player, encouraging a child to bear weight evenly on both sides. Describes construction of the switch, which needs 4 pieces of masonite or hardboard 7 by 10 by 1/8 inch, 2 large disposable aluminum cookie sheets, 1 subminiature size plug, 5 feet of conductor, 22 gauge stranded wire, double sided tape, masking tape, foam mounting tape or f

Down-Under Shelf (Model Wh185)

The Down-Under Shelf, model WH185, is an under seat carrying caddy designed for use by individuals who spend long periods of time in wheelchairs. Designed for rigid wheelchairs, this caddy attaches under the chair with Velcro straps and provides ample space for school books, shopping items, clothing, etc. DIMENSIONS (HxWxD): 4 x 14 x 11 inches. COLOR: Black.

Dragger

Dragger, also called Dragger32, is a mouse emulator program designed for use by individuals with upper extremity, neurological, or severe physical disabilities or spinal cord injury. Using the AutoClick feature, mouse clicks can be performed by dwelling. Dwells and switch clicks can be transformed into double clicks, right clicks, or drags. This feature enters a left-button click after the pointer is motionless for a user-defined period of 0.2 to 10 seconds. A single click entered manually or wi

Drawstaring Linen/cotton Pant (Model 015)

The Drawstring Linen/Cotton Pant, model 015, is women’s slacks designed for use by individuals with catheters, mobility disabilities, or spinal cord injury. Made of linen and cotton, these pants feature a functional drawstring in front, an elastic waist at the back, and a long rise and inseam. Other features include a four-inch invisible zipper to accommodate catheter tubing should the wearer choose to wear catheter accessories outside of clothing. The zipper is on the right side (left side ava

Dresser Drawer Pull

DO IT YOURSELF PURPOSE: To make dresser drawers easier to open for senior and individuals with arthritis, use of only one hand or fine motor or grasping disabilities. The existing knobs can be removed and replaced with eye bolts with a piece of soft rope or cord tied between them, creating a single handle that extends across the drawer and enables the user to open the drawer with one hand. A modification of this option would be to leave the existing knobs in place and tie the rope between the k

Dressing Stick

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with upper extremity disabilities, arthritis, or mobility disabilities to dress independently. The dressing stick can be used to pull up trousers, pull a shirt or sweater up onto a shoulder, an pull socks up. This illustrated article, included in a chapter entitled "Bedroom & Getting Dressed," provides detailed instructions and illustrations for making a dressing stick from materials readily available at hardware stores: a dowel and a plasti

Dressing Stick

"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals with upper extremity disabilities, arthritis, or mobility disabilities to dress independently. To make this device, pre-drill starter holes in each end of dowel. Insert dowel into pipe insulation, if desired. Put a dab of glue in one hole of in the dowel. Twist the cup holder into hole, being careful not to split dowel. Put a dab of glue in open hole at other end of dowel. Twist the hat/coat hook into hole, being careful not to split dow

Dressing Table

DO IT YOURSELF -- PURPOSE: To make daily grooming tasks more accessible to individuals who use wheelchairs or who are unable to stand for long periods. This article, included in a chapter entitled "Bedroom & Getting Dressed," provides suggestion for creating an accessible vanity and personal grooming area. Suggestions include using a small, sturdy table with a comfortable seated height and sufficient knee clearance for a dressing table. If needed, select a chair that meets the user's specifi

Drink Holder

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with severe phyical disabilities to carry beverages. A chrome-plated curtain rod was used to make a vertical tube system that fits into brackets installed on a wheelchair. A horizontal crossbar supports a plastic container which, in turn, holds a cup or glass that the user can access with a straw. TITLE: Easels, Calling Systems and More. JOURNAL: TAD Journal. REF: Volume 24, Number 4, Summer 2004: P. 16-17. PAGES: 3 (including cove

Drinking Cup (Model Ha-4262)

The Drinking Cup, model HA-4262, is a cup with spout designed for use by individuals with grasping, swallowing, or severe physical disabilities or spinal cord injury. This plastic cup holds 250 milliliters and has a long mouthpiece. DIMENSIONS: 175 millimeters high. WEIGHT: 38 grams. COLORS: Green, blue, pink, or clear.

Drinking Straw Holder (Model 1126)

The Drinking Straw Holder, model 1126 is a straw holder designed for use by individuals with grasping disabilities, upper extremity disabilities or amputation, spinal cord injury, or cerebral palsy. Designed for use with all straw sizes, this device consists of a spring clamp that attaches to the edge of a glass, and a steel retainer that holds the straw in place. The device is latex free.

Drinking Straw Trainer

DO IT YOURSELF ENTRY --- PURPOSE: To assist children with severe disabilities in transitioning from bottle feeding to straw drinking. The tip was cut off a pacifier and the pacifier was attached to a cup with a built-in straw. The remainder of the pacifier was kept intact to provide the needed tactile stimulation to aid the child in remembering to suck. MATERIALS: Pacifier and cup with straw. TOOLS: Scissors. SKILLS REQUIRED: Cutting. AUTHOR: Chambers, M. TITLE: Assistive Technology Ideas that W

Drinking Straws (Model 6791)

Drinking Straws, model 6791, are extra long, flexible polyethylene straws and may be cut to the length desired. DIMENSIONS: 18 inches long.

Drinkup Hands-Free Drinking System

The Drinkup Hands-free Drinking System is designed for use by people with grasping, fine motor, upper extremity, severe physical disabilities and upper extremity amputation. The system has three main components: a polycarbonate jug with cover; a food-grade PVC fluid tube and straw with a silicone rubber CamelBak bite valve; and a polypropylene and fiberglass base into which the jug is secured. The base has an adjustable arm to position the straw and bite valve. The open end of the tub is inserte

Drinkup Travel Lite

The Drinkup Travel Light is a wheelchair drink holder with a long straw designed for people who have lower extremity or mobility disabilities and spinal cord injury and grasping, fine motor, upper extremity, severe physical disabilities or upper extremity amputation. The Drinkup Travel light consists of a water bottle cage with a bracket so it can be attached to the backrest frame of a wheelchair. It has a semi-rigid flexible arm that extends upward past top of backrest and forward around to the

Drop Arm Commode

The Drop Arm Commode is a commode with removable arms designed for use by individuals with severe physical disabilities requiring easy transfer from a wheelchair or bed. The commode features an adjustable position backrest and a plastic pail with a 6 3/8 quart capacity. The commode assembles without tools. DIMENSIONS (HxDxW): 22 x 20 x 22.75 inches. The width between the arms is 18 inches. WEIGHT: 18 pounds.

Drop Front Or Inner Seam Opening Fleece Pants (Model C121-2)

The Drop Front or Inner Seam Opening Fleece Pants, model C121-2, are children's pants designed for use by children with mobility disabilities, severe physical disabilities, spinal cord injury, or incontinence. These pants come with either a complete inner crotch opening, or a drop front opening from waist to hip on both sides. Drop front openings can be used with urinals and provide space for dressing. The inner seam crotch opening allows for changing of personal needs without undressing or taki

Drop Seats (Models 31649, 31651, 31655, & 31656)

Drop Seats are solid seat inserts are designed for use by individuals who use wheelchairs. Made of seven-ply birch, these seats have pre-drilled mounting holes and include T-nuts. Cutout slots fit around chair frame crossmembers. DIMENSIONS: Model 31649 fits chairs with 14-inch seats and is 14 x 11 inches; model 31651 fits chairs with 16-inch seats and is 15 x 13 inches; model 31655 fits chairs with 18-inch seats and is 17 x 15 inches; and model 31656 fits chairs with 20-inch seats and is 19 x 1

Drop-Arm Commode (Model 8900)

The Drop-Arm Commode, model 8900, is a commode with removable arms designed for use by individuals with balance and mobility disabilities and incontinence. A push-button arm release accommodates transfers. The arms have soft foam handles. DIMENSIONS: Overall width is 21.75 inches. CAPACITY: Maximum weight capacity is 300 pounds. COLOR: Available in white or chrome.

Drop-Arm Commode (Model 9669)

The Drop Arm Commode is a commode with removable arms designed for use by individuals with mobility or severe physical disabilities. Designed to aid with transfers within restricted or confined areas, this commode features lever release for drop down-arm, angled legs with adjustable-height leg extensions, silencing collars to minimize rattles, four non-skid rubber tips, and snap-on seat and lid. OPTIONS: Convertible to mobile model with optional adjustable wheeled legs. A splash shield is availa

Dual Paddle Adult Folding Walker

The Dual Paddle Adult Folding Walker is a folding adjustable walker designed for use by individuals with walking disabilities. The Ergonomic Paddle can be depressed with the palm for the folding and unfolding of the walker. The handles "lock-in" when the walker is opened. This walker folds flat for compact storage. OPTIONS: Walker wheel and glide accessories are available. DIMENSION (HxDxW): 30 x 17 x 20 inches. The eight adjusts from 30 to 37 inches in 1-inch increments. The width between the

Dual Paddle Youth Size Folding Walker

The Dual Paddle Youth Size Folding Walker is a folding adjustable walker designed for use by children with walking disabilities. The Ergonomic Paddle can be depressed with the palm for folding and unfolding of the walker. The handles "lock-in" when the walker is opened. This walker folds flat for compact storage. OPTIONS: Walker wheel and glide accessories are available. DIMENSION (HxDxW): 25.25 x 16 x 20.5 inches. The height adjusts from 25.25 to 32.75 inches in 1-inch increments. The width be

Dual Plate Switch (Model Cm-12)

The Dual Plate Switch, model CM-12, is a touch switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This switch is activated by pressing either end of a rocking plate. Pressing one end activates one switch; pressing the other activates the second switch. DIMENSIONS: 2.5 x 4.3 x 1 inches. WEIGHT: 4 ounces.

Dual Pneumatic Switch (Model Cm-14)

Dual Pneumatic Switch is a switching unit activated by sipping or puffing on a tube. Each of the two actions activates a different switch. Any chosen tube may be used; one is available as well from the manufacturer (extra). DIMENSIONS: 2.5 x 4.75 x 1.75 inches. WEIGHT: 7 ounces.

Dual Pushbutton Switch (Model Cm-13)

The Dual Pushbutton Switch is a pair of snap-action button switches housed side-by-side, each in a 1.25-inch diameter recess. Switches are activated by pressing. An audible click is provided when the switch is activated. DIMENSIONS: 2.5 x 4.3 x 1 inches. WEIGHT: 4 ounces.

Dublup (Models 9Dlp1, 9Dlp2, & 9Dlp3)

The Dublup is large geometric shapes designed for use with children with severe physical or neurological disabilities. Supplied in two sections, these foam-filled PVC shapes can be combined to create a variety of large shapes. SIZES: Size 1, model 9DLP1, is suitable for children up to four years of age. Size 2, model 9DLP2, is suitable for children from four to nine years of age. Size 3, model 9DLP3, is suitable for children nine years of age and older. DIMENSIONS (HxLxW): Size 1 is 10 x 48 x 15

Dublup Ballpool

The Dublup Ballpool is ball flotation therapy designed for use with children with neurological, balance, or mobility disabilities. The Ballpool walls are created by joining two Dublup Size 1 shapes (see separate entry). The unit is then lined by attaching the included ball sack inside the walls with Velcro to complete the pool, which can then be filled with the included 800 balls. OPTIONS: An additional sack of balls is included. DIMENSIONS: The pool is 57 inches in diameter. COLOR: The balls co

Duplex Footswitch (Model 476-S)

Dual foot operated momentary rocker switch with mechanical interlock to prevent both circuits from operating at same time. Cast aluminum housing: non skid base. POWER: 15 amps, 125 to 250 volt AC, 1/2 horsepower. DIMENSIONS: 8.5 x 3.5 x 2 inches. WEIGHT: 1.75 pounds.

Dwyer Signature Ada Series

The Signature ADA Series is a kitchen with accessible components designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury, short stature, or other physical disabilities. This kitchen system includes a large-capacity, frost-free upright refrigerator; electric surface burners; sink bowl; single- lever faucet; and exhaust hood. The Adaptable Sink Base converts to meet Americans with Disabilities Act specifications and the folding design stores components an

Dycem

Dycem is non-slip matting designed to hold objects in place without permanently adhering to the countertop, tray, table, or other surface. Dycem can be used to keep small items from falling off trays, to hold cups in place to prevent spilling, to prevent bowls from moving during mixing or stirring, as placemats to assist in eating, or in a variety of other ways. Dycem is available in round or rectangular placemats,or in rolls. DIMENSIONS: Available models include a disc 5.5 inches in diameter, a

Dycem Hippo Play Mat & Dycem Hippo Seat Mat

The Dycem Hippo Play Mat and the Dycem Hippo Seat Mat (sold separtely) are non-slip matting designed for use by children with severe physical or balance disabilities. The hippo-shaped play mat can be used as a placemat, on writing boards, or during play or therapy to prevent elbows, hands, knees, or feet from sliding. Made of Dycem foam, the Hippo Seat Mat can be used in wheelchairs, positioning chairs, and standard chairs to prevent the person in the chair from sliding. DIMENSIONS: Both models

Dycem Jar Opener (Model 16K027A)

The Dycem Jar Opener, model 16K027A, is a jar opener designed for use by individuals with upper extremity disabilities, arthritis, or grasping disabilities. The device is a hollow cone lined with Dycem, which exerts a strong grip on most surfaces. The user places it over the top of the jar and turns. The device can be used to open jars with lids from 1 to 4 inches in diameter. COLOR: Blue.

Dycem Non-Slip Cup Holder

The Dycem Non-Slip Cup Holder is a cup holder designed for use by individuals with upper extremity and severe physical disabilities. Made of Dycem non-slip material, this shallow holder fits snugly on the bottom of most standard mugs and glasses. Once on the cup, the holder prevents unwanted movement and spillage. The holder can be removed for washing in warm, soapy water. DIMENSIONS: 3.5 x 0.75 inches. COLOR: Blue.

Dycem Self-Adhesive Discs And Squares

Dycem Self-Adhesive Discs and Squares are non-slip matting designed to prevemt slipping on tile, tabletops,and other surfaces. The discs or squares (sold separately) can be placed on the bottom of computers, keyboards, printers, telephones, lamps, and most other items to prevent slipping and unwanted movement. To apply, peel off backing and press to the object. DIMENSIONS 15 x 3 millimeters or 21 x 3 millimeters. COLOR: Black.

Dycem Self-Adhesive Strips

Dycem Self-Adhesive Strips are non-slip matting designed to prevemt slipping on tile, tabletops,and other surfaces. The strips can also be wrapped around writing implements, paintbrush handles, toothbrush handles, and other items to create a non-slip grip. DIMENSIONS (WxL): Each strip is 1 1/8 x 16 inches. COLOR: Blue or yellow.

Dycem Tortoise Play Mat

The Dycem Tortoise Play Mat is non-slip matting designed for use by children with severe physical or balance disabilities. The turtle-shaped play mat can be used as a placemat, on writing boards, or during play or therapy to prevent elbows, hands, knees, or feet from sliding. DIMENSIONS: 14 x 10 inches. COLOR: Blue, red, yellow, or forest green.

Dycem Tray Liner

The Dycem Tray Liner is non-slip matting designed to line trays to keep items from sliding or spilling when the tray is tilted. The liner can be cut to fit any size tray. DIMENSIONS: 15 x 10.75 inches. COLOR: Floral, green gingham, or transparent.

Dynamic Parapodium

The Dynamic Paradium is parapodium designed for use by individuals with paraparesis and paraplegia. A Parapodium is a type of orthosis equipped with a large base and is used to assist individuals with lower extremity and trunk paralysis in assuming an upright position without the additional support of crutches. The Dynamic Parapodium is designed to enable users to gain vertical position of the body while allowing for active rehabilitation and movement. The device is composed of a frame with late

Dynamic Protractible Mouthstick.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Lightweight protractible mouthstick operated by the tongue, intended for use by persons with no active neck motion. Describes fabrication of a mouthstick that would allow a person with high level quadriplegia to operate pushbutton devices. Materials include angle aluminum, rigid plastic tubing, a hose clamp, aluminum bushing, Plastisol and a rubber band. The mouthpiece is measured to fit the individual patient. Includes diagrams, a photograph and refer

Dynavox Eyemax

The DynaVox EyeMax is an eye controlled input system for communicator that can be used to access DynaVox Vmax communication device (see separate listing). The EyeMax can be used by people of all ages and cognitive abilities with direct vision in one or both eyes, even if they wear contact lenses or glasses. Rapid, stable calibration eliminates the need for frequent caregiver intervention. Calibration is maintained as long as a user’s needs remain unchanged. This system attaches to the Vmax sec

Dynavox M3

The DynaVox M3 is a direct-selection or scanning symbol-based communicator designed for use by individuals with communication, speech, and cognitive disabilities. This dynamic display speech generating device offers scene-based pages that simplify message composition for individuals who encounter difficulty understanding conversations, questions, or directions; primarily use non-symbol strategies such as gestures; communicate only basic needs/information; value picture dictionaries as aids in ex

Dynavox T10

DynaVox T10 and its incorporated compass app, is a portable communication board that includes a range of communication page sets designed to specifically address the needs and strengths of individuals with Autism, Cerebral Palsy, Stroke, Traumatic Brain Injury, Apraxia, Down Syndrome, ALS and other neurological, developmental and communication challenges. DynaVox Compass software is research-based communication option for individuals who cannot use their natural voice to participate more fully

Dynavox V+

The DynaVox V+ is a direct selection or scanning communicator designed for use by individuals with significant communication, speech, language and learning disabilities. This device can be used for day-to-day communication and real-time communication in person or via text message or e-mail, and by phone. The device also supports language and literacy development. The V+ is available as a Dedicated communication device or in an open configuration that provides the user access to all areas of the

E Z Topp (Model 530 To 570)

The EZ Topp is a bib or clothing protector designed for use by individuals with eating, swallowing, or upper extremity disabilities. With three snaps at the back of the neck, these vests go on over the shoulders and have a terry velour front and a waterproof nylon backing. The necks are ribbed. OPTIONS: Back opening. SIZES: Child (model 730), adult (model 740), or extra-large (model 750). DIMENSIONS: Model 730 is 11 x 11 inches, model 740 is 15 x 15 inches, and model 750 is 17 x 32 inches. COLOR

E-Z Call

E-Z Call is a switch device designed to activate a hospital nurse call system. The pressure sensitive plate is mounted where the patient may apply slight pressure to it with any part of the body to activate it. A 10 foot cord is provided. Technically, E-Z Call is only a switch; it must be connected to a hospital call system to operate. The manufacturer also makes a portable alarm which E-Z Call may be plugged into (see PA-1 Portable Alarm, by Med Labs.).

Eagle Eyes

EagleEyes is designed for individuals who have limited to no intentional muscular control but have control of their eye movement as a result of stroke, traumatic brain injury, Rett syndrome, neurological disorders, spinal muscular atrophy and severe cerebral palsy. The mouse pointer follows the location that the user is looking at on the screen. The eyes replace the mouse. Selection is made by looking at a small area of the screen for a short period of time, which causes a mouse click. Usable wi

Easel For Wheelchair

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with severe phyical disabilities to paint. The easel has a crossbar that restson the arms of a wheelchair with an arm in the center that points away from the user; a clamp at the end of the arm holds the vertical mount for the easel, which extends between the user's legs. The vertical mount supports a vertical rail equipped with two horizontal carriers that hold the painting in place. Another arm, mounted on the left, is equipped w

Easel Switch

--- "DO IT YOURSELF" ENTRY ------- A switch mounted to the front surface of a Triwall easel and covered by a square plate of expanded PVC material to enlarge the switch surface.

Easie Eaters

Easie Eaters are a fork and spoon with built-up handles designed for use by individuals aged three years and older with fine motor, grasping, or upper extremity disabilities. These easy-grip plastic utensils have built-up, curved handles that facilitate greater success with hand-to-mouth feeding. Latex-free and dish-washer safe, the set includes one spoon and one fork. COLOR: Assorted.

Easy Gentleman Swing Door Opener (Interior Doors)

The Easy Gentleman Swing Door is a pneumatically opened & closed swing door operator kit designed to convert side-hinged doors to automatic doors to provide barrier free access for people with mobility issues. The converter allows manual use of the door by those not requiring the automatic opener. Designed for interior residential doors, this operator is mounted to the push side of the door and both sides of the cylinder are pressurized during the entire cycle. The standard includes the Pneu

Easy Reader Bookstand

The Easy Reader Bookstand is a bookholer for individuals with limited strength and mobility. This bookstand is made of lightweight, durable chrome-plated steel and folds flat for storage and portability. It has adjustable arms that hold everything from paperback books to large magazines and newspapers.

Easy Tens & Premier 10S

Easy TENS and Premier 10s are Transcutaneous Electrical Nerve Stimulation (TENS) devices to be used by individuals with arthritis and severe physical disabilities for the symptomatic relief and management of chronic (long term) intractable a pain and as an adjuctive treatment in the management of post surgical and post traumatic acute pain problems. The Easy TENS is has a fixed pulse rate and width. The Premier 10s has an adjustable pulse rate, width and amplitude. The Both units are equipped wi

Easyblue

EASYBLUE is a switch adapted Bluetooth device designed for use by individuals with upper extremity, fine motor, or severe physical disabilities. Bluetooth devices commonly used with cell phones are worn on the user’s ear and interface with the cell phone utilizing the voice recognition or dialing features of the cell phone. The devices are commonly activated with a small button located on the device, rendering them inaccessible to individuals with limited mobility. This adapted Bluetooth headset

Easyslide (Model 1480)

The Easyslide, model 1480, is a transfer aid designed for use in moving individuals with mobility disabilities. It can be used to aid in transferring between beds and x-ray or operating tables, shower trolleys, or cots. This transfer aid has a soft, padded outer surface for comfortable transfers, with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. OPTIONS: Disposable protective polyethene covers. DIM

Easytrack 2 Post, 3 Post, & 4 Post Systems

The Easytrack System is an overhead ceiling lift system designed for use with individuals with balance disabilities, cognitive disabilities, lower extremity disabilities, mobility disabilities, severe physical disabilities, and spinal cord injury. The system comes in a kit with no tools required and fits most standard ceilings in homes. The non-slip neoprene surface on both the foot plate and top plate ensure that the posts stay in place. The 2 Post System is designed to ease transfers. The 3 Po

Eatery: Feeding Aid For Quadriplegics.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Feeding device manipulated with head motion and operated without electrical or mechanical power to allow self feeding by a person with limited hand function. Self feeding device made for a quadriplegic consisting of a sectioned tray with spoon shaped projections, attached to a table assembly which can be fitted to a wheelchair. The person pushes food into the spoon projections with a headstick and eats as if from a regular spoon. Requires some control

Eating Apparatus

The Eating Apparatus is a mechanical feeder designed to assist individuals with little arm strength or muscle control to feed themselves. This motorized feeding arm consists of a steel track, a forearm support for the right arm, and a 12-volt car window motor. The device is controlled by a remote switch which is operated by the left hand. The feeding aid attaches to a table-like surface with a C-clamp. PROTOTYPE DEVELOPMENT: This device was designed by John Duffus for an individual with very lit

Eating Smock (Model 978)

The Eating Smock, Model 978 is an adult bib in a smock style. The smock is made of a waterproof, vinyl-backing with a terry cloth front. Features include: a front pocket to catch crumbs, ties for back closure, short sleeves and is machine washable. SIZES: One size fits all.

Ec+ Extra Care Bariatric Transport Chair (Model 6850)

The EC+ Extra Care Bariatric Transport Chair, model 6850, is a powered transport chair and stretcher designed for use by individuals with obesity and mobility, neurological, or severe physical disabilities. It converts from a chair to a stretcher in order to facilitate transport and transfers. FRAME: In stretcher position, height is adjustable from 24.5 to 32.5 inches. Overall greatest width is 33.5 inches. There is a full width push handle. CONTROLS: Electric operation with pendant controls. SE

ECO-14

The ECO-14 is an Augmentative and Alternative Communication (AAC) device that combines advanced communicating and computing in a single device. The large screen is a versatile AAC aid for individuals with communication limitations. A version of ECO-14 without the computer capabilities is also available to meet Medicare/Medicaid funding requirements.

Eco2

ECO2 is scanning communicator designed for use by individuals with communication, speech, neurological, or severe physical disabilities or spinal cord injury. This system is a scanning communicator and Windows 7 computer. Features include a large display screen, an internal DVD/CD drive, custom block scanning, Unity programs, notebook tools, advanced icon import capabilities, pull-down menus, modified access method menus, wireless switch access, Clarity Icons, Icon Browser Tool, and Color Picker

Eco2 With Ecopoint

ECO2 with ECOpoint is an eye-controlled scanning communicator designed for use by individuals with communication, speech, neurological, or severe physical disabilities or spinal cord injury. ECOpoint allows the user to access the features of the scanning communicator and Windows XP computer through eyegaze. Features include a large display screen, an internal DVD/CD drive, custom block scanning, Unity programs, notebook tools, advanced icon import capabilities, pull-down menus, modified access m

Economy Ball Pool (Model 9Bpec)

The Economy Ball Pool, model 9BPEC, is a ball flotation therapy unitdesigned for use with children with mobility, neurological, or balance disabilities. This unit consist of a padded metal frame with a vinyl liner. The unit has a 6,000 ball capacity (balls not included).OPTIONS: Single large ball pool step, ball nets, and sets of 1,000 balls. DIMENSIONS (HxLxW): 24 x 90 x 65 inches.

Economy Molded Lap Tray (Model A70711)

The Molded Lap Tray, model A70711, is a lapboard designed for use by individuals with mobility or lower extremity disabilities who use wheelchairs. The lap tray is designed to enable the user to eat or do other activities from their wheelchair and to provide some protection from spills. The tray fits standard and desk arm wheelchairs and includes a cut-out area to accommodate the torso. Other features include a molded recess area for holding a cup or glass. OPTIONAL: A Comfort Pad (see separate

Economy Shower Stall (Model Ess-1)

The Economy Shower Stall, model ESS-1, is a portable shower designed for use by individuals who cannot access a conventional bathroom. The stall requires no permanent installation or electrical or water connections, enabling it to be moved as needed, and it can be used for showering or as a privacy enclosure for a commode. The stall features replaceable vinyl shower curtains on all four sides for privacy. Other standard features include a shower unit with an electric pump for dispensing water fo

Ecopoint

The ECOpoint is an eye controlled input system for a communicator designed for use with the Prentke Romich ECO or Essence PRO communicators. The user sits so that their eyes are approximately 24 inches from the unit, and it tracks their eye movement, using the movement eyes to place the cursor and activate specific functions on the communicator.

ECTtracker

The ECTtracker is an eye-tracking software application designed to help individuals with paralysis or significantly impaired mobility communicate their needs exclusively through eye movements. It first takes into consideration the current state of the eyes (open, closed, or one eye opened). Then the application ttransmits the corresponding key control codes to any receiving software within the system, such as ECTkeyboard, a program that allows individuals with reduced motor skills to select char

Editor's Desk

The Editor's Desk is a combination tilt desk and bookholder designed to support books and papers at the appropriate angle for reading while providing an inclined surface for writing. The desk features a shelf for books at the top of the writing surface and a lip to hold papers in place on the writing desk. A groove below the lip holds pens and pencils. OPTIONS: Transparent writing pad. DIMENSIONS(WxDxH): 25 x 23 x 11 inches. COLOR: Natural or dark cherry. GUARANTEE: The manufacturer offers an un

Eezee Mouse Cursor

The eeZee Mouse CURSOR is a hands-free mouse alternative designed for use by individuals with upper extremity or neurological disabilities, spinal cord injury, or repetitive motion injuries. This device provides full mouse control of computers or alternative and augmentative communication devices (AAC), and enables users to control cursor movements through subtle body movements. Tilt-sensor technology is utilized to perform the cursor movements. Operating as a joystick in space, the key to the s

Eezee Mouse Switch

The eeZee Mouse SWITCH is a hands-free mouse alternative designed for use by individuals with upper extremity or neurological disabilities, spinal cord injury, or repetitive motion injuries. The eeZee Mouse SWITCH provides full mouse control of computers or alternative and augmentative communication devices (AAC), and enables users to control cursor movements through subtle body movements, while providing real-time control of the left/right clicks and drag. Tilt-sensor technology is utilized to

Effect 5000

The Effect 5000 is an alternating air pressure mattress surface designed to prevent pressure sores for people with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This mattress overlay is placed on the regular mattress on a bed. It comes in a single bed or hospital bed size. If placed on a king sized bed, it covers half the bed. POWER: Uses 110-volt AC. OPTIONS: 12-volt to 110-volt AC inverter for use in a van. WARRANTY: One year warranty.

Eight-Ten Pac (Model Wh810)

The Eight-Ten Pac is an under seat pocket carrying accessory designed for use by individuals who spend long periods of time in a wheelchair. This carrying aid attaches to the frame of wheelchairs and hangs under the seat behind the user's legs. Features include SR-ADST Side Release Adapt A Straps system for quick attachment and detachment, and a large circular custom pull ring for easy detection and opening. This bag is made in the USA of highly durable nylon fabric with nylon tape bonded seams.

El-E: An Assistive Object Fetching Robot For Human Environments

---- PROTOTYPE --------- PURPOSE: To design an assistive robot (El-E) that takes advantage of common flat surface structures in order to retrieve unmodeled, everyday objects for people with motor impairments. El-E is able translate its manipulator and associated sensors to different heights, which enables it to grasp objects on a variety of surfaces, such as the floor and tables, using the same perception and manipulation strategies. The robot can approach an object selected with the laser poin

Elastic Waist Corduroy Pants (Model 101Ecx)

The Elastic Waist Corduroy Pants, model 101ECX, are trousers designed for use by men with physical disabilities or who have difficulty dressing. These pants feature a sewn-in elastic waist, mock fly, two front pockets, drawstring, belt loops, and a full cut in the seat and thigh. SIZE: 40, 42, and 44. DIMENSIONS: 34-inch inseam. COLOR: Black, navy, olive, or taupe.

Elastic Waist Pant (Model 016)

The Elastic Waist Pant, model 016, is women's slacks designed for use by individuals with catheters, mobility disabilities, spinal cord injury, or those having difficulty dressing. Available lined or unlined, these slacks are designed for ease in sitting as the material contours to the curve of the body leaving less bulk at the front making the back fuller and longer. Features include stretch fabric for comfort, a generous rise and inseam, and a 4-inch invisible zipper to accommodate catheter tu

Elastic Waist Pant With Button Fly (Model 102E)

The Elastic Waist Pant with Button Fly, model 102E, are men's pants designed for use by men with fine motor or grasping disabilities or arthritis The button fly and inset back pocked are held in place with Velcro closures. SIZE: 28 to 44 inches long. COLOR: Black, olive, or khaki.

Electric Can Opener And Knife Sharpener

The electric can opener and knife sharpener is a kitchen tool for teens and up, who have a hard time using a regular can opener. This product would be ideal for those who have a disability that affects their motor skills and for persons with arthritis. Twist-Off cutting lever for easy cleaning. Built-in manual knife sharpener. Cord storage. Opens cans up to 6 ½ inches height. COLOR: White. DIMENSIONS: 8 ½ inches height x 4 3/8 width x 4 5/8 depth.

Electric Height Adjustable Activity Table

The Electric Height Adjustable Activity Table is a powered height adjustable work table designed for use by individuals who use wheelchairs. Height adjustment is achieved with push-button controls. Both models have a laminate top and an extruded aluminum base. DIMENSIONS (HxLxW): 27 to 39 x 48 x 30 inches or 28 to 34 x 60 x 30 inches. COLOR: Maple top. WARRANTY: Two-year warranty.

Electric Holdown (Model 128)

The Electric Holdown, model 128, is wheelchair restraint system that may be installed for the driver or passenger wheelchair position. (Installation depends on the underside of the van.) The holdown consists of two pieces: one piece hooks to the wheelchair frame behind the casters, and the second mounts into the floor of the van. The floor mounted piece clamps onto the piece attached to the chair. The control switch mounts to the vehicle's dashboard or the most convenient position for the operat

Electric Wheelchair Power Socket

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with communication disabilities who uses a powered wheelchair to power a laptop computer with augmentative communication software using the wheelchair battery. Speech software was needed during school hours; however, the computer battery did not have sufficient capacity to meet the demand. To be heard in class, powered speakers were also needed, which further diminished operating time. A portable solution was necessary to enable the speec

Electric Window Opener.

The Electric Window Opener is a remote control switch designed for use by individuals with upper extremity disabilities or spinal cord injury. This remote control switch can operate up to 4 windows from a command center. It features a rain sensor that automatically closes the window. The switch is designed to be used with Andersen awning and venting roof windows. Power operator replaces standard hand crank on window.

Electrical Footswitch, Air Actuated Footswitch

Single pedal footswitch. Steel base and cover with rubber treads. Momentary on. Double action switch and press on, press off switch mechanisms also available.

Electrical Footswitches.

Round footswitch. Polyvinylchloride base sealed to flexible PVC cover. PVC cable attached. Snap action switch, momentary on. Water and dirt proof. Can also be used as hand switch or activated by other part of body.

Elefun Ball Popper (Model 1530)

The Elefun Ball Popper, model 1530, is a switch-operated toy designed for use by children with upper extremity or severe physical disabilities or spinal cord injury. This toy is an adapted version of the Playskool Poppin' Park Elefun Busy Ball Popper from Hasbro. The toy is adapted to connect to an external switch (not included), such as a capability switch, through a .125-inch jack. Once the switch is activated, three colorful balls pop out of the elephant’s trunk and roll about as its trunk mo

Elevated Bathtub Seat

Elevated Bathtub Seat is designed for children and adults with physical disabilities who have difficulty sitting in a tub or standing in a shower. The open front and coccyx dimple in the back provide access for personal hygiene. Additional features include smooth, rounded corners for comfort, a finger indent handle for transport and suction cup feet for stability. DIMENSIONS: 13 x 15 ½ x 8 1/2” (33 x 39 x 22 cm) CAPACITY: Supports up to 400 lbs. (181.8 kg) WEIGHT: 4 ½ lbs. (2kg) WARRANTY/GUA

Elliot Elephant (Model 9307)

Elliot Elephant, model 9307, is a switch operated toy designed for use by children with upper extremity, mobility, or severe physical disabilities or spinal cord injury. When the child activates a capability switch (not included) this plush toy elephant will sing and sway to the song “Do Your Ears Hang Low” while its ears flap up and down. The toy also works without a switch. POWER: Uses 3 AA batteries. DIMENSIONS (HxW): 10 x 7 inches. WEIGHT: 2 pounds.

Ellipse 3 & Ellipse 6

Ellipse Switches are a collection of low-profile touch switches designed for use by individuals with upper extremity disabilities. Shaped to fit the hand, activation is accomplished when the switch is touched anywhere on the surface. The Ellipse 3 requires one to three ounces of pressure and is ideal for mounting on a wheelchair tray next to the joystick control. The Ellipse 6 is designed for users that need a large target but have a light touch. This switch requires five to eight ounces of pre

Elvoron Mr In-Line Drive Home Elevator

Elvoron MR In-Line Drive Home Elevator is an interior elevator designed to provide multi-level access in private residences for people with limited mobility, mobility disabilities and spinal cord injuries. There is a choice of two drive systems available; hydraulic or in-line (machine room-less). The hydraulic drive system offers a control system and a quiet operation. An area outside the elevator hoist-way is required to accommodate the controller and the hydraulic pump unit. This area can b

Elvoron Stella Home Elevator

The Elvoron Stella home elevator by Garaventa Lift is an interior elevator with the look and feel of a commercial elevator. It is designed to provide multi-level access in private residences for people with limited mobility and mobility disabilities. It features automatic horizontal sliding elevator doors in either stainless steel or other finishes. The walls and fixtures can be customized for the user.

Emergency Chair (Model 400)

The Emergency Chair, model 400, is an emergency evacuation carrier designed for the quick evacuation of individuals with severe physical disabilities and cognitive disabilities from multi-floor buildings. It is designed to go both up and down stairs with the ability to quickly change directions in the event of an obstruction. There are multiple points of lift and it negotiates stairs easily. Made of fire-retardant material, it is equipped with built in leg straps and a harness for secure transp

Emergency Signs And Words

Emergency Signs and Words is a personal skills and independent living skills tutorial program designed for use with individuals with cognitive or developmental disabilities. This program teaches 80 signs and words which are related to medical and emergency situations. Categories include reasons for medical care (allergic reaction, broken bone); first aid (bandage, gauze); help (police, ambulance); medical clinic (doctor, nurse, prescription); operating room (surgeon, operating table); and patien

Emg Switch

The EMG Switch is an electromyographic (EMG) switch designed for use by individuals with severe physical or upper extremity disabilities. The device is operated by small controlled muscle movements and senses muscle activations to provide a switch closure. Features include simple threshold adjustment, built-in digital signal processing that extracts intentional activations from weak muscles, and an audible caregiver call tone. POWER: Uses double-A NiMH rechargeable batteries. A charger is includ

Ems 2000

The EMS 2000 is an neuromuscular stimulator designed for use by people with neuromuscular or circulatory disabilities. This dual channel analog unit produces continuous, reciprocating and cycled stimulation patterns. The EMS 2000 features 1 to 60 seconds On/Off times, 2 seconds Off Ramp, and 0 to 8 seconds On Ramp. The system adjusts pulse rates from 1-80Hz, and 300us fixed pulse width, with adjustable output intensity from 0 to 98mA. The kit also includes four pigtail electrodes, sets of lead

Ems 2000Xl

The EMS 2000XL is a transcutaneous electrical nerve stimulator (TENS) that is designed to minimize chronic and acute pain associated with neurological and severe physical disabilities. Basic features include adjustable pulse rate and pulse width (8 pulses per burst and 2 burst per second); frequency range of 2 to 150Hz, and 50 to 250 us adjustable pulse width, constant current and continuous stimulation. This ergonomically designed device incorporates a sliding amplitude control cover for safety

Emt Link

EMT Link is an emergency alert system with monitoring service designed for use by seniors or individuals with mobility or severe physical disabilities or spinal cord injury. This personal emergency response system (PERS) allows the user to send an alarm and request assistance by pressing a button on an automatic calling console unit or a hand-operated radio transmitter. A telephone connection is established automatically with the SafetyCare Response Center. A third button on the console can be p

Enable Eyes Control Bar

The Enable Eyes Control Bar is an eye controlled communicator program and mouse emulator designed for use by individuals with speech or communication disabilities and severe physical or neurological disabilities. The system utilizes state-of-the art eye tracking technology to create an all-in-one computer access and AAC software solution. Users can experience communication through speech generation, emails, instant messaging, and more. The software is designed to put eye tracking tools within re

Enable Eyes Ii Access Module

The Enable Eyes II Access Module is an eye controlled input system for communicators designed for use by individuals with speech or communication disabilities and severe physical or neurological disabilities. This unit can be added to the ComLink ST3G or ComLink LT3G (see separate entries) at any time it is needed by the user. This unit adds an eye tracking input capability to a ComLink communicator for a user with a progressive disability. If a user can currently use finger touch as the access

Endorphin Pro Gym Ct (Model En 365) & Endorphin Pro Gym (Model En 360)

The Endorphin ProGym CT, model EN 365, and the Endorphin Pro Gym, model EN 360, are weight exercise machines designed to building upper and lower body strength and size while improving cardiocvascular capacity for people with mobility disabilities. All major muscle groups may be exercised. Strength training features include: leg extension/standing leg curl, chest press, high pulley, low pulley and a 200-pound weight stack. The EN 365 CT also includes a hand cycle with pulse meter and an adjusta

Endurance D / E Cylinder Holder For Wheelchairs (Model R103E)

The Endurance D/E Cylinder Holder for Wheelchairs, model R103E, is a cylinder cart for wheelchairs designed for use by individuals with mobility and respiratory disabilities. Made of chrome-plated steel, this carrier attaches to the seat back uprights of most wheelchair brands and accommodates D and E size oxygen cylinders.

Enfold Comfort Chair

The Enfold Comfort Chair is a geriatric chair designed for use by individuals with Alzheimer's disease, dementia, or mobility or balance disabilities. The deep back design makes unassisted departure difficult to deter wandering or unassisted mobility. The chair is covered in moisture-proof fabric and the seating area has a sanitized Medi-Flextra vinyl, which is resistant to microbial attacks and broad-spectrum gram positive and negative bacteria. The seating area is also double high-frequency we

Enfold Push Wheelchair

The Enfold Push Wheelchair is a transport wheelchair designed for use by individuals with head injuries or cardiac or respiratory disabilities. The chair provides full lumbar, neck, and head support. The gas spring facilitates patient transfers and allows the chair to be set at any angle. The four position leg rest is standard. A washable, natural lamb's wool cover is included. COLOR: Desert, Galaxy or Multi.

Entertainment In The Home

Entertainment in the Home is a personal skills and independent living skills tutorial program designed for use with individuals with cognitive or developmental disabilities. This program teaches 80 words related to leisure activities. Five how-to videos cover the basics of games, hobbies, music, sports and television. The categories covered are: Games (board games, cards,instructions); hobbies (books, camera, cooking, crafts); music (CD, CD player, piano, volume); pets (bird, dog, cat); and tele

Envelope And Box-Style Sandbags

These sandbag patient positioners come in envelope and box form. Grommets (the perforated edges on the sandbag) and handles (placed on the short side of the sandbag). Can choose the dimensions.

Equestrian Lift

The Equestrian Lift is a powered, mobile overhead transfer lift designed for transfer individuals with neurological, mobility, or lower extremity disabilities or spinal cord injury from a wheelchair or chair to a horse. This lift, which is based on the Pilot Lift (see separate entry) platform, uses a vertical lifting motion and can be used for transfers from the floor, a platform or a vehicle to a horse, and vice versa. It has three-way directional movement to allow for use with the horse positi

Ergodex Dx-1 Programmable Keyboard

The Ergodex DX-1 Adaptive Keyboard is a keyboard interface designed for use by individuals with severe physical, upper extremity, vision or cognitive disabilities. This keyboard consists of a tablet and 25 adhesive-backed keys. Although the adhesive forms a strong bond, the keys can be moved by twisting them off, enabling them to be moved around on the surface. The keys are programmable to perform any number of tasks, including controlling single or multiple functions such as moving entire bloc

Ergolift & Ergolift Wl

The Ergolift and the Ergolift WL are powered transfer lifts designed for use with individuals with balance, lower extremity disabilities, and severe physical disabilities and spinal cord injury. The Ergolift is a mobile floor lift. The control box gives the user access to the emergency stop and lowering devices, the visual and auditory low battery indicator, charge indicator as well as the same controls as the hand set. The handset controls the start and stop and the 2-speed vertical movement. T

Ergonomic Assistive Mug

The Ergonomic Assistive Mug is designed for users with upper body disabilities or grasping difficulties that make it difficult to hold a cup or drink without spilling. Its large handle and ribbed sides are designed to prevent spills. Small lip on the opposite side of the handle allows the mug to be lifted with both hands. Can be used with how or cold liquids. Is made of very dense, strong plastic.

Ergopod (Model 300)

The ErgoPOD, model 300, is a computer work center designed for use by individuals with mobility, neurological, or other physical disabilities. Designed for use with desktop computer systems, this height-adjustable unit can be used by individuals who use wheelchairs, individuals who use a computer while in bed or in a reclined position, and standing users. This work center features a steel tube frame, eliminating the need for under-table cross braces,and a wide U-shaped base for accessibility. Th

Ergopod (Model 500)

The ErgoPOD, model 500, is a computer work center designed for use by individuals with mobility, neurological, or other physical disabilities. Designed for use with desktop computer systems, this height-adjustable unit can be used by individuals who use wheelchairs, individuals who use a computer while in bed or in a reclined position, and standing users. This work center features a steel tube frame, eliminating the need for under-table cross braces,and a wide U-shaped base for accessibility. Th

Ergostand

The Ergostand is a standing transfer aid designed to be used by individuals with balance, lower extremity, mobility, and severe physical disabilities. The Ergostand can be used to dress, clean and transfer individuals in need of additional support. The individual is supported by a band sling with a Velcro waist enclosure reinforced with two belts. A back support, a padded knee support and an anti-slip foot base ensure safety. Control of start and stop, motorized base, and 2-speed vertical moveme

Erin Dress

The Erin Dress is a women’s dress designed for use by women who use wheelchairs or who have difficulty dressing. Made of jersey knit, this dress features a wrap design with front snaps that make it easy to put on and take off. The loose-fitting stretch fabric is designed for maximum comfort. Other features include a V-neckline with snap closure covered with a ruched sash attached to the right shoulder, draping over the chest, and snapping on the left shoulder. This dress is button- and Velcro-

Eslate Disabled Access Unit (Model Dau 5000)

The eSlate Disabled Access Unit, model DAU 5000, is a voice output and switch-accessible voting machine designed for use by voters who are blind or have low vision or who have severe physical or upper extremity disabilities. This voting machine has interfaces for head movement and sip and puff switches, which enable individuals with severe physical disabilities to cast their ballot using only head movement or their breath. An audio ballot reader includes audible signals that provide confirmation

Essence Pro

The Essence PRO is a handheld direct selection and scanning communicator designed for use by individuals with communication, speech, neurological, or severe physical disabilities or spinal cord injury. It has a 14.1-inch touchscreen with 1024 x 768 resolution. In addition to the touchscreen, the user can interface with the Essence Pro using the on-screen keyboard, keyboard and mouse (included), visual and auditory scanning, or a 1-, 2-, or multi-switch pointer (switch not included). It features

Essential Bed Wedges (Models F1575-2, F1510, & F1512)

The Essential Bed Wedges are back rests designed for use by individuals with spinal cord injury, respiratory disabilities, or digestive conditions. These high-density foam wedges offer a 30-degree incline and can be used to elevate the head or the legs. A washable, replacable zippered cover is included. OPTIONS: Replacement covers are available. DIMENSIONS: Model F1575-2 is 24 x 26 x 7.5 inches deep. Model F1510 is 24 x 26 x 10 inches deep. Model F1512 is 24 x 26 x 12 inches deep. COLOR: The cov

Essential Convoluted Foam Bed Pads (Models F7220, F7201, F7243, F9010E, F9011E, F9012E, F90001E, F9004E, F9007E, F9002E, F9005E, F9008E, F9003E, F9006E, & F9009E)

The Essential Convoluted Foam Bed Pads are foam mattress surfaces designed for use by individuals at risk for pressure sores or pressure ulcers. These fire retardant, dense pads have a thick base that ensures pressure reduction and air circulation. SIZES: Models are available for hospital beds (no. F7220, F7201, and F7243) and twin (no. F9010E, F9011E, and F9012E), full size (no. F9001E, F9004E, F9007E), queen size (F9002E, F9005E, and F9008E), or king size mattresses (no. F9003E, F9006E, and F9

Essential Hardwood Transfer Board (Model P2300)

The Essential Hardwood Transfer Board, model P2300, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. This hardwood board is sealed and highly polished for ease in sliding and features a tapered end and one hand cut-out. DIMENSIONS (WxL): 8 x 30 inches. CAPACITY: 250 pounds.

Essential Plastic Transfer Board (Model P2301)

The Essential Plastic Transfer Board, model P2301, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. This high-impact plastic board has a smooth surface for ease in sliding and features a tapered end. DIMENSIONS (WxL): 8 x 27.5 inches. CAPACITY: 250 pounds.

Etac Tasty Beaker with Holder and Lid (Model 80404042)

The Etac Tasty Beaker with Holder and Lid, model 80404042, is a cup designed for people with impaired sensibility or coordination. This item consists of a beaker, a beaker holder that insulates against hot liquid, and a lid with a spout. This ergonomically designed cup has a handle and a supporting edge that permits various grips. The Etac Tasty Beaker with Holder and Lid is dishwasher safe.

Etch A Sketch (Model 7002)

The Etch A Sketch, model 7002, is a switch-operated drawing activity designed for use by children with severe physical or upper extremity disabilities. This switch-adapted version of the classic Etch A Sketch has four built-in switches to enable the user to draw in horizontal (right and left) or vertical directions (up and down). To erase, remove the Etch A Sketch from the base and shake. The base also has four external jacks for capability switches (not included) if required. POWER: Uses 6 C ba

European Footswitch

Footswitch. 5 European style, square and round, foot operated momentary switches. POWER: 7 amps, 125 to 250 volt AC, or 10 amps, 125 to 250 volt AC, 1/ 2 to 1 horsepower.

Eva Mobile Lift (Model 450Ee)

The Eva Mobile Lift, model 450EE, is a powered transfer lift designed for use in transferrring individuals with mobility or severe physical disabilities. It can lift an individual from a seated or prone position, and can also be used for gait training in combination with lifting accessories such as a gait belt.

Evacuation Chair (Model 6254)

The Evacuation Chair, model 6254, is an emergency evacuation carrier designed for use by individuals with mobility disabilities. This chair features a rear Stair-TREAD system, a tank-style track system to enable the chair to be moved down stairs by one person without lifting. FRAME (HxWxD): 45 x 20.5 x 28 inches. The chair is 11 inches deep when folded. The lightweight aluminum frame folds for storage and features extendable head and foot lift handles with molded handgrips for two-person liftin

Ex N' Flex Leg Machine (Model Ef-250)

The Ex 'N Flex Leg Machine, model EF-250, is a powered leg-propelled bicycle exerciser disigned for use by people with spinal cord injury or lower extremity disabilities. This compact, lightweight cycle is height-adjustable for use from a wheelchair, chair, or scooter and can be moved using its specially-designed wheels and lockdowns. The unit features an accessible control panel, a bio feedback indicator, timer, forward and reverse directions, auto safety shut off, leg straps, and three speed l

Executive Footswitch (Models 72, 74, B2S, & B4S)

Dual foot operated momentary rocker switch with mechanical interlock. Die cast metal cover. Nonskid base. Pressure on one side activates circuit independently of other side. Wiring inside. Only single cord exposed. POWER: 10 amps, 125 to 250 volt AC, 1/2 horsepower. DIMENSIONS: 5 5/8 x 4 x 1 1/8 inches. WEIGHT: 1.25 pounds.

Expandable Tray

The Expandable Tray is a wheelchair lap tray designed for use by individuals who use wheelchairs. The wooden surface provides a large surface support for elbows and forearms, enabling better trunk support. Available with or without mounting clamps, the tray can be used on manual or powered chairs or on standing positioners, and adjusts to various widths. When not expanded, the tray fits through doorways and aisles. SIZES: Medium or large. DIMENSIONS: Each side extension adds 4.5 inches to the wi

Explore-A-Center Busy Box (Model 1811)

The Explore-A-Center Busy Box, model 1811, is a sensory busy box designed for use by children with severe physical, upper extremity, or cognitive disabilities. This toy encourages parallel play for two to four children at one time, providing users with eight activities which turn on multi-colored blinking lights, mechanical music, vibration, and many different sounds including children’s laughter, water splashing, and circus music. Side mirrors allow for visual recognition. It has a volume contr

Extended Width Armrest (Model 77382)

The Extended Width Armrest, model 77382, is an add-on armrest designed for with lower extremity, mobility or severe physical disabilities, spinal cord injury and others who use wheelchairs, especially those who spend extended periods of time in wheelchairs. Intended to provide a wider resting surface without increasing armrest height, this armrest accommodates individuals with upper extremity edema, flaccidity, or increased tone by decreasing the risk of slippage and damage to the arm and should

Extra Care Bariatic Bed (Models 4054Sd & 4054Sdx)

The Extra Care Bariatric Bed, models 4054SD and 4054SDX, is a motorized, reinforced bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features a two-piece frame with powered height adjustment, fowler backrest and leg lift. Model 4054SDX also has powered Trendelenburg and reverse Trendelenburg. It has a battery backup and a standard remote control. OPTIONS: Scale system; over-bed trapeze transfer aid; bariatric mattress; bolsters; s

Extra Care Bariatric Patient Room Recliner (Models 7150 & 7155)

The Extra Care Bariatric Patient Room Recliner, models 7150 and 7155, is a reinforced recliner chair designed for use by individuals with obesity and mobility disabilities or by individuals who require support while sitting. This chair back reclines up to 40 degrees and the leg rest articulates as the back reclines. The manual reclining mechanism is located in the rear of the chair and is intended to be operated by an attendant. The chair also has four locking casters. DIMENSIONS: Model 7150 is

Extra Long Bib (Model 6068)

The Extra Long Bib, model 6068, is a plastic bib designed to protect the area from the neck to the knees from spills. The bib is made of flexible waterproof vinyl. DIMENSIONS: 36 x 24 inches wide.

Extra Long Drinking Straw

The Extra Long Drinking Straw is a drinking straw designed for use by individuals with upper extremity or swallowing disabilities. This straw has four flexible sections, two in the center and one near each end to allow the user to bend it to the position needed for best access. The straw can be cut with standard scissors to shorten it to any length that will work best for the user. DIMENSIONS: 28 inches long with an inside diameter of .35 inch. COLOR: Natural.

Extra Long Drinking Straw

This Extra Long Flexible Drinking Straw is designed for those individuals confined to a wheelchair or a bed. With its ability to bend in three places, the user may drink while laying down in bed, or from an upright position when sitting in a wheel chair so that those persons will not have to strain their neck, trying to reach the straw, and with this product the individual will not have to hunch down. OPTIONS: Sold in package of 10 or may buy a set of 50 in bulk. To buy this item in bulk, contac

Extra Straws For Sip And Puff Switches

These Straws come in a package of 20 straws that are compatible with Enable Marts Sip and Puff Switches, which help individuals with severe motor disabilities who cannot operate switches otherwise. Activated by a sip or puff.

Extra Wide Bedside Steel Commode

The Extra Wide Bedside Steel Commode is a height-adjustable commode designed for use by individuals with severe physical disabilities. This commode's heavy-duty welded construction offers more space between the arms and higher seat adjustments than standard commodes. It is equipped with skid-resistant rubber tips and a commode pail with a lid. The pail capacity is nine quarts DIMENSIONS (HxDxW): 27.5 x 22.5 x 27 inches. The width between the arms is 23 inches. The seat height adjusts form 19.5

Extra-Long Reacher

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to reach items at the foot of the bed. The handle was cut off an existing reacher with U-shaped gripping jaws. A piece of aluminum tubing was added to extend the length of the reacher and a wire extension was soldered to the wire that activates the jaws when the trigger is squeezed. TITLE: Bedside Computer Stand. JOURNAL: TAD Journal. REF: Volume 26, Number 2, July 2006: p. 10-11. PAGES: 3 (including cover).

Eye Blink Switch (Model 9008)

The Eye Blink Switch is an eye switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. Aiming the switch's sensor at the user's eye enables the user to control communication devices, toys, computers, or other connected devices. Built-in controls give momentary, timed, or latched output. Special internal circuitry can be set to activate with each eye blink or with every double eye blink to ignore normal eye blinking. An adjustable holder

Eye Gaze Frame

“DO IT YOURSELF” ENTRY --- PURPOSE: To create an eye gaze frame for a child with intellectual, severe physical disabilities, and/or communication disabilities. An eye gaze frame can be made with simple materials obtained at a hardware store. Using three lengths of PVC plumbing pipe in whatever size and length desired hot glue two round pipe connectors (of the appropriate size) to a 3 x 5 inch wood base. Fit the three pieces of pipe together with elbow connectors and then fit the entire structure

Eye-Talks Communicator (Model 3700)

The Eye-Talks Communicator, model 3700, is a communication board designed for use by individuals with severe physical disabilities and communication disabilities. Equipped with a self-contained, height-adjustable stand, this clear board enables the user to communicate using an eye gaze while still being able to see the person being communicated with and the surroundings. This communicator also comes with an Individualized Educational Plan (IEP) with a suggested activities list. OPTIONS: Goosenec

Eye-Tracking Electronic Tablet

---- PROTOTYPE --------- PURPOSE: To create a prototype of an affordable eye-tracking electronic tablet computer for individuals with disabilities. Eye-tracking technology and software packages can be prohibitively expensive. Engineering students at Brigham Young University in partnership with EyeTech Digital Systems developed a tablet computer that can be controlled with a person’s eye movements. The prototype is projected to cost under $1,500. SYSTEM REQUIREMENTS: Windows 7. DIMENSIONS (LxHxD

Eyegaze Edge

The Eyegaze Edge is an eye-operated communication and control device designed for use by children and adults with cerebral palsy, spinal cord injury, brain injury, ALS, multiple sclerosis, brainstem stroke, muscular dystrophy, and similar disabilities. Users make selections by looking at keys displayed on the screen for a fraction of a second (eye gaze). A small camera mounted under the Eyegaze screen takes 60 pictures per second of the user’s eye. Those images are analyzed by a processor that i

Eyegaze Edge Tablet

The Eyegaze Edge is an eye-operated communication and control device designed for use by children and adults with cerebral palsy, spinal cord injury, brain injury, ALS, multiple sclerosis, brainstem stroke, muscular dystrophy, and similar disabilities. The unit can be transferred from a wheelchair to a table or desk. Users make selections by looking at keys displayed on the screen for a fraction of a second (eye gaze). A small camera mounted under the Eyegaze screen takes 60 pictures per second

Eyeguide Assist

EyeGuide Assist is an eye-controlled input system designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. The system includes a headset that mounts a small camera in front of the user's face to track eye movement, a receiver that connects via USB to the computer to transmit the eye movements to the computer, and software. Future software upgrades are included. The system supports three built-in methods to click on links, type, or issue other comma

Eyeguide Eye Tracker

The EyeGuide Eye Tracker is an eye-controlled input system designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. The system includes a headset that mounts a small camera with a wireless transmitter in front of the user's face to track eye movement, a wireless receiver that connects via USB to the computer to transmit the eye movements to the computer, and software. The software allows the user to calibrate the system to lighting conditions and c

Eyetech Tm4

The EyeTech TM4 is an eye controlled input system designed for use by individuals with upper extremity, neurological or severe physical disabilities or spinal cord injury. The system comes with Quick Glance software. The TM4 unit tracks one or both eyes using dark pupil, single or binocular video tracking with infrared illumination, accurate to 0.5 degree. The standard data rate is 30 frames per second with 1, 5, 9, or 16 available calibration points. Typical operating distance of head motion (h

Eyetech Tm4 Mini

The EyeTech TM4 Mini is an eye controlled input system designed for use by individuals with neurological, upper extremity or severe physical disabilities or spinal cord injury. The system comes with Quick Glance software. This unit tracks one or both eyes using dark pupil, single or binocular video tracking with infrared illumination, accurate to 0.5 degree. Its standard data rate is over 80 frames per second with 1, 5, 9, or 16 available calibration points. Typical operating distance of head mo

Ez Care Home Care Bed

The EZ Care Home Care Bed is a motorized bed designed for use by people with severe physical or mobility disabilities or spinal cord injury. This fully electric bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can raised and lowered to facilitate transfer. Trendelenberg and reverse Trendelenberg positions can be attained. By moving all three independent areas, the head/foot gatch can be raised or lowered. FRAME: The frame splits into independ

Ez Door Closer

"DO IT YOURSELF" ENTRY --- PURPOSE: To enable wheelchair users to close the door behind them. To make this door-closing aid, drill holes to install the eye hooks in three separate locations: at the top corner of the door,.at the inside top corner of door frame, and at the center of door frame. Tie one end of the rope to the hook on the door. Thread the rope through the hook on the top door frame. Thread the rope through the eye hook on the center of the frame. Attach a bracelet or other handle

Ez Pool Lift

The EZ Pool Lift is a manual hydraulic pool lift designed for use by individuals with spinal cord injury, lower extremity disabilities, or severe physical disabilities. It is portable for storage and/or relocation to another pool area. Stainless steel construction and a UV resistant powder coat finish ensure corrosion resistance. Other features include adjustable sling chains, a durable, adjustable mesh sling-style seat, a concrete-imbedded anchor system, and 360-degree manual rotation. OPTIONS:

Ez Pull Sheet

The EZ Pull Sheet is a transfer aid designed for use in positioning and turning individuals with mobility disabilities in bed. This transfer aid is constructed of a layer of soft cotton/poly material on top, and a layer of nylon on the bottom. The tight weave of the top layer is such that the sheet has intrinsic liquid barrier characteristics so it offers incontinence protection. The EZ Pull Sheet has double-stitched seams and five integrated handles. It can be machine washed and dried and is w

Ez Putting Aid

The EZ Putting Aid is a golf accessory designed for use by individuals with spinal cord or brain injury or severe physical disabilties. Intended for wheelchair users with limited or no hand function but with limited movement of one arm, the unit cand be used on the left or right side and mounts on the wheelchair arm with the two included Velcro straps. Once the device is mounted, the user pushes or pulls the swing handle with the wrist, arm, or hand to perform the putt. As the handle is moved, t

Ez Rider Transport Stroller, Ez12T-New Cordura Fabric

EZ Rider Transport Stroller is designed for the less involved person with some upper body control. It has been satisfactorily crash-tested at 30 mph, 20 g deceleration in a forward facing configuration using the EZ Rider Transport stroller's 5-point tie down harness. The New Cordura Fabric is a lightweight, compact-folding push chair that folds like an "umbrella" style stroller. It is designed to promote an upright posture with support, adjustable seat depth, adjustable height swing-away foot

Ez Warm Wash Solution Comfort Seat (Model Scs130)

The EZ WarmWash Solution ComfortSeat, model SCS130, is a personal cleansing system designed for use by individuals with upper extremity, neurologogical, mobility, or balance disabilities, or arthritis or spinal cord injury. The unit installs under the existing toilet seat and the control unit can be placed on the left or right or moved aside to accomodate certain bathroom wheelchairs. Features include a temperature-controlled rear wash and adjustable water pressure. The device uses the existing

Ez Wash Solution Comfort Seat (Model Scs105)

The EZ Wash Solution ComfortSeat, model SCS105, is a personal sleansing system designed for use by individuals with mobility, balance, upper extremity, or neurological disabilities, or spinal cord injury, or arthritis. The unit installs under the existing toilet seat, requires no electricity, and connects directly to existing plumbing. Features include natural water rear wash and a turn-dial water pressure control. WARRANTY: A two-year warranty is standard with an optional two-year extended wa

Ezcomm

The EzCOMM is a handheld direct selection and symbolic communicator and tablet computer designed for use by individuals with communication, speech, neurological, or severe physical disabilities, autism or spinal cord injury. It has a 12.1-inch touch screen with 1024 x 768 resolution (landscape), and a high density, impact-resistant case. In addition to the touch screen, the user can interface with the EzCOMM using a variety of switches that can connect to the units dual switch ports. Windows 7 P

Fabian Writing / Reading Aid (Model H73500)

The Fabian Writing/Reading Aid, model H73500, is an overhead bookholder and writing board designed to allow individuals confined to a bed in a supine position to read and write. The unit consists of a vertical support bar which attaches to the headboard of the bed with padded clamps (included), or to the wall with screws. The overhead fixture swings horizontally to any desired position, and supports the easel which adjusts to a wide range of angles. The metal parts are chrome-plated steel, and t

Facepaint

Facepaint is a simple drawing and reading tutorial program designed for use by young children with physical and cognitive disabilities. This program offers a choice of male or female faces in a selection of four skin colors. Non-readers can build faces by choosing from a selection of features on the screen. Early readers can type in words for their choices and watch the faces build. The faces can be printed or saved to disc. If the computer is equipped with a sound recorder, created faces can be

Farmer Biball

The Farmer BibAll is a bib designed for use by children and adults with eating, swallowing, upper extremity, or severe physical disabilities. This reversible bibs has a soft French terry front and a lightweight backing coated in 100 percent rip-stop nylon. This bib looks like denim overalls with a two-button henley-style shirt underneath. Machine washable and dryable, the bib has Velcro closure and comes with a carrying and storage bag. DIMENSIONS (WxL): 17 x 33 inches. GUARANTEE: 100 percent sa

Fawssit Foldaway Wheelchair Shower (Models S2000, Ss4040, R3000, T4000, & B5000)

The FAWSsit Foldaway Wheelchair Shower is a portable shower designed for use by individuals who use wheelchairs. This self-contained portable shower stall can be used anywhere there is access to warm water, a drain and an electric outlet. The unit comes completely assembled and no tools are required for set up. The unit has a nylon mesh embedded double-layer vinyl drain pan. The custom design allows for maximum water removal and Velcro strips to hold sides in place. The front folds down for whee

Feeding And Toileting Devices For A Child With Arthrogriposis.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Feeding device to allow a person with no arm use to use a spoon or fork with head control. Simple device made with a small wood block 2 3/4 inches square and 1 1/ 4 inches high; a dowel 3 inches long and 1/2 inch in diameter; a nail with a flat head; a stationary-type clothespin; and a 4 or 5 ounce lead fishing sinker to provide weight. Provides instructions and photographs. The clothespin, which swivels on top of the dowel, holds the spoon or fork whi

Feeding Bibs And Fashion Bibs

The Feeding Bibs and Fashion Bibs are adult bibs designed for use by individuals with eating, feeding, or swallowing disabilities. The Feeding Bibs ($7.50) are made of terrycloth on a choice of a ripstop nylon or rubber-backed fabric backings. These large square bibs feature knit ribbing at the neck and snap closure at the back of the neck. The Fashion Bibs ($7.50). These triangular bibs are made of dress fabric or men's shirt fabric, lined with ripstop nylon or rubber-backed fabric as a moistu

Feeding Tube Holder

DO-IT-YOURSELF-ENTRY --- PURPOSE: To enable an individual with ALS to indepemdemtly pour liquid meals into a feeding tube. The device consists of a quarter-inch plywood base with an upright length of plywood attached to it. The syringe barrel is attached to the side of the 2 x 4, enabling the user to use two hands to pour the liquid food. The unit disassembles for travel and storage. MATERIALS: one piece of quarter-inch plywood, a 9-inch length of 2 x 4, and fasteners. TOOLS: Wood shop tools. S

Female Urinal

The Female Urinal is a female urinal designed for use by women and girls with severe physical disabilities. These urinals are designed to help prevent spills. The urinal has a sturdy grip for handling and can be used in several positions for use in bed. Lightweight and designed to be easy to clean, the urinal is equipped with gradation marks to measure output. This urinal holds 35 ounces.

Feminal Female Urinal

The Feminal Female Urinal is a female urinal designed for use by women with mobility or severe physical disabilities or spinal cord injury. With this urinal a woman can urinate in a reclined, seated, or standing position. When the urinal is gently pressed against the body, its shape creates a leak-proof seal.

Fiber Optic Sensor With 3 Pin Connector (Model Asl 202-3 Pin)

The Fiber Optic Sensor with 3 Pin Connector, model ASL 202-3 PIN, is a sensor switch designed for use by individuals who require a small, fine, no force switch type. This single function fiber optic sensor switch has a round target area with an adjustable activation range from touch to 2.5 inches. It can be programmed for either normally open or normally closed operation. In the normally open (NO) mode, switch activation occurs when an object is detected in the selected range. In the normally c

Film Can Pull Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Easy to pull switch to allow a child to turn on a tape player, battery toy or light. Switch made from a 35 mm plastic film can, 2 one inch brass washers, sewing elastic, string, 6 feet of two conductor, 22 gauge stranded wire, a subminiature size plug, and a large ring (about 6 inches--available in craft stores). Provides instructions for construction, with diagrams and a photograph. SKILLS REQUIRED: Assembly. Soldering. AUTHOR: Burkhart, L J TITLE: Mo

Finger Flex Switch

Finger Flex Switch is a switch built into a partial glove. Bending a finger activates the switch. The switch uses a 3.5 millimeter mini-phone plug as a connector.

Finger Isolation Button (Model 716)

The Finger Isolation Button is a buttonswitch and fine motor skills training device designed for use by children with fine motor disabilities. This recessed button encourages isolated touch and is designed to help a child gain the motor skills necessary for mastering computer keyboards. DIMENSIONS (LxW): 3 x 1.5 inches. WEIGHT: 3 ounces. COLOR: Yellow.

Finger Switch (Model 717)

The Finger Switch, model 717, is a wearable finger switch designed for use by individuals with severe physical or upper extremity disabilities. This switch is worn like a ring; the relative position of the switch to a mobile finger that controls the switch can be precisely set and maintained. A Velcro strip is included to allow the switch to be mounted to an arm or leg. DIMENSIONS: 1.5 x 0.5 inches. The Velcro strip is 18 inches long. WEIGHT: 1 ounce.

First Dog (Model 9208)

The First Dog, model 9208, is a switch operated toy designed for use by children with upper extremity, fine motor or severe physical disabilities. The toy requires a capability switch (not included). When the switch is activated (not included), the First Dog, Bo, will nod his head, wag his tail and bark. POWER: Uses 2 AA batteries. DIMENSIONS (HxLxW): 6 x 6 x 4 inches. COLOR: Black. WEIGHT: 0.75 pounds.

First Words Ii Sterling Edition

First Words II Sterling Edition is a language and vocabulary tutorial program designed to provide training of early nouns for individuals with autism, language-learning, developmental, physical, visual, or hearing disabilities. This program provides highly structured training of early developing nouns. The program trains 50 words in developmental order, but focuses on only five words at a time. Words are presented in isolation or with one other on the screen. The user can choose to work on a bla

First Words Sterling Edition

First Words Sterling Edition is a language and vocabulary tutorial program designed to provide training of early nouns for individuals with autism or language-learning, developmental, physical, visual or hearing disabilities. This program provides highly structured training of early developing nouns. The program trains 50 words in developmental order, but focuses on only five words at a time. Words are presented in isolation or with one other on the screen. The user can choose to work on a black

Firststep Select

The FirstStep Select is an air flotation mattress surface designed to provide pressure relief to individuals with skin breakdown . This product can be used as an overlay or as a mattress replacement system. The FirstStep Select features convenient height and weight presets for patient placement, easy-to-use controls, three-section pressure adjustment, and rapid deflation for cardio- pulmonary resuscitation (CPR). This product is indicated for the prevention of skin breakdown, in the treatment o

Fishamajig Bundle

The Fishamajig Bundle is a switch operated toy designed for use by children with severe physical or upper extremity disabilities. The bundle includes both the Air Swimmer Clown Fish and the Switchamajig Controller (see separate entry). The user plugs the Switchamajig Controller into the remote control which has four buttons with four switch jacks, opens the Switchamajig app (see separate entry) on an iPad, and starts playing with the toy. The custom screen allows the user to flap the tail back a

Fishing Rig, The

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with quadriplegia to fish. The rig is built of tough half-inch Lexan plastic and fastens securely to the wheelchair frame, providing a strong, stable platform close to the stomach. On that platform is a universal joint that allows sideways rotation and up and down swing. The handle of the fishing rod is adapted to fit into the universal joint. (Another option is to attach the adapter arm to the handle of any fishing rod with wrap-around c

Fist / Foot Or Wheelchair Bump Switch

The Fist/Foot or Wheelchair Bump Switch is a foot or toe switch designed for use by individuals with fine motor, upper extremity, or neurological disabilities or cerebral palsy. This switch has a large activation surface to hit with a fist, palm, or foot. It can be attached with Velcro to the side of a nightstand or cabinet at toe height, and the user can then activate the switch by bumping it with his or her toe on a wheelchair footrest or by driving the wheelchair carefully up to the switch an

Fixed Height Ada Desk

The Fixed Height ADA Desk is a computer desk designed for use by individuals who use wheelchairs. The scratch-resistant work surface has a a smooth, rounded solid oak front edge and an oak chair rail to prevent hardware from sliding off. A hinged "Flip-Top" door runs the entire length of the work surface for access to cords and cables. A cable channel hides and protects cords and cables. DIMENSIONS (HxWxD): 32 x 44 x 30 inches. COLOR: The standard color combination is an oak work surface and pu

Fixed-Drop Hardware Kits (Models 32617H, 32618H, 32542H, 32603H, 32604H & 32543H)

Fixed-Drop Hardware Kits are seating hardware general designed to attach drop seats to wheelchairs. The kits include four drop hooks, eight washers, and eight socket head screws. DIMENSIONS: Models 32617 and 32603 create a one-inch drop. Models 32618H and 32604H create a two-inch drop. Models 32542H and 32543H create a three-inch drop. Models 32617H, 32618H, and 32542H fit chairs with 7/8-inch tubes. The other models fit chairs with one-inch tubes.

Flaghouse Deluxe Folding Therapy Mat

The Flaghouse Deluxe Folding Therapy Mat is a therapy mat designed for use in clinic or therapy settings. Soft, one-inch thick shock-absorbing polyurethane foam is layered over rigid, 1 3/8 inch thick cross-linked polyethylene foam for shock absorbency. The surface is an 18-ounce vinyl-coated nylon cover, which is heavy-duty and rip-resistant, especially at stress points. It is treated with antibacterial and anti-fungal additives and can be cleaned with a diluted disinfectant. DIMENSIONS (LxW):

Flaghouse Height Adjustable Personal Worktable

The Personal Worktable is a height-adjustable work table designed for use by children and adults who use wheelchairs. It can be used as an accessible desk or small activity table. The table height is adjusted by turning the admustment knobs on the legs. DIMENSIONS(HxLxW): The height can be adjusted from 23 to 33 inches and the work surface measures 36 x 30 inches. COLORS: Maple finish laminate top with almond powder-coated base.

Flamingo, The

The Flamingo is a child's bath and toilet seat designed for use by children with severe physical disabilities or mobility disabilities. Available in three sizes and designed for children from two to thirteen years of age, the unit consists of a height-adjustable wheeled frame and a removable, multi-use padded seat covered in waterproof upholstery. When removed from the frame, the seat can be used as a toilet seat or bath seat, Removable lateral sections provide additional support if needed. The

Flannel Robe (Model 19-06)

The Flannel Robe, model 19-06, is a women's robe designed for use by women with physical disabilities. The robe features long sleeves, a collar, two patch pockets, and snaps all the way down the front. SIZE: Basic sizes include small, medium, large, and extra large. Larger sizes include extra extra large, and extra extra extra large. COLOR: Assorted colors and prints.

Flannel Robe (Model 2701)

The Flannel Robe, model, 27-01, is a men's robe designed for use by individuals with physical disabilities. It is a wrap style robe with long sleeves and two pockets. SIZE: Small, medium, large, and extra large. COLOR: Assorted plaids.

Flat Pac (Model Wh180)

The Flat Pac WH180 is a under seat pocket designed for use by individuals who spend long periods of time in wheelchairs. This seat pocket permanently attaches to the underside of a wheelchair seat with Velcro where it is hidden for added security. The seam is stitched down the center of the bag so the chair can be folded without articles getting in the way. The Flat Pac has a pocket for keys and a double zip closure with large pull rings. DIMENSIONS (WxD): 14 x 11 inches.

Flat Top Lateral Roll Armrest

The Flat Top Lateral Roll Armrest is an add-on armrest designed for use by individuals who use wheelchairs. This armrest fits over the existing armrest and the wide foam top provides comfort for the arm while discouraging lateral leaning. The design prevents spinning of the support around the armrest and prevents shoulder elevation. A low-profile model fits hemi wheelchairs and those that have less than three inches of clearance between the top of the finger guard and the bottom of the armrest.

Fleece Lined Wheelchair Poncho

The Fleece Lined Wheelchair Poncho is a rain poncho designed for wear by men or women with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. This poncho provides full lap and knee coverage when the user is seated, with a short back. Designed to be convenient for most power chair and scooter users, this hooded poncho has a 100 percent nylon water resistant shell and polyester fleece lining for added warmth. It also has a 14-inch zippered front opening

Fleece Pants With Outside Seam Opening (Model 121)

Fleece Pants with Outside Seam Opening, model 121, are men's trousers designed for wear by individuals with spinal cord injury or severe physical disabilities, or others who need assistance in dressing. These pants are made of 12.5-ounce polyester/cotton fleece. Features include a zipper or Velcro closure on the outside seams; wider cut and higher rise in the back; elastic waist with an adjustable cord; reinforced wrist loops for lifting and dressing; and a mock fly for style. The outside seam o

Flex Switch (Model 5855)

The Flex Switch is squeeze switch designed for use by individuals with limited upper limb mobility. It is a single switch operated by bending the flexible rubber tip 0.5 inches in any direction, with an activating force of 6.5 ounces. The switch provides tactile and auditory feedback. The Flex Switch comes mounted on an angled metal rod to facilitate positioning. The rubber tip can be removed and rotated. It can be mounted on a wheelchair or table.

Flex-A-Bed Hi-Lo Series Adjustable Bed (Series 185)

The Flex-A-Bed Hi-Lo Series Adjustable Bed, series 185, is a motorized bed designed for use by individuals with mobility, respiratory, digestive, or severe physical disabilities or spinal cord injury. This bed enables the user to raise the head and feet independently or simultaneously, and the bed height is adjustable. Features include a choice of a wired or wireless hand-operated pendant control; an innerspring mattress in a choice of soft, medium, or firm; a high-density foam foundation; and r

Flex-A-Bed Premier Adjustable Bed (Model 790)

The Flex-A-Bed Premier Adjustable Bed, model 790, is a motorized bed designed for use by individuals with mobility, respiratory, digestive, or severe physical disabilities or spinal cord injury. This bed enables the user to raise the head and feet independently or simultaneously. Features include a choice of a wired or wireless hand-operated pendant control; wood trim panels over metal frame and the mattress retainer at the foot of the bed; an innerspring mattress in a choice of soft, medium, or

Flex-A-Bed Value-Flex Adjustable Bed (Model 158)

The Flex-A-Bed Value-Flex Adjustable Bed, model 158, is a motorized bed designed for use by individuals with mobility, respiratory, digestive, or severe physical disabilities or spinal cord injury. This bed enables the user to raise the head and feet independently or simultaneously. Features include a hand-operated pendant control; mattress retainer at the foot of the bed; an innerspring mattress in a choice of soft, medium, or firm; locking casters; Bioguard treatment of mattress fabrics to inh

FlexAble Switch

The FlexAble Switch is designed for use by people with cerebral palsy or neurological or a severe disability of all ages. The FlexAble Switch is similar in action as the Wobble Switch. However, the FlexAble switch incorporates a flexible gooseneck that makes the switch easy to mount to tables, chairs, bed rails, etc. to give more flexibility and range of motion to the user. This switch has an operating force of 90g necessary to activate.

Flexi-Fit Wheelchair Gloves

Flexi-Fit Wheelchair cloves are push gloves designed for use by individuals with severe physical disabilities, spinal cord injury, or who have had strokes. Designed for individuals with limited hand function, these gloves open wide for ease in putting them on. Made from quality neoprene, these gloves have a small textured area built into the palm for added grip. SIZES: Small, medium, large, or extra large.

Flexiciser Pro

The Flexiciser Pro is an exercise machine designed for use by individuals with mobility disabilities or arthritis. This unit offers a natural walking/running stride, moving arms and legs simultaneously with no weight-bearing impact on joints. This exerciser features three modes: Active (self), passive (FlexiMotor), and resistive (muscle toning). Made of stainless steel for durability, this unit is designed for use in institutional settings, such as colleges, nursing homes, assisted living facili

Flexigrips

FlexiGrips are exercise cuffs designed for use by individuals with upper extremity or grasping disabilities. Designed to aid users in holding the handlebars of Flexiciser exercise machines (see entries), these cuffs secure around the wrist with attached Velcro straps. A hook extends from the underside of the cuff and fits over the handlebar.

Flip And Talk (Model 2085)

Flip and Talk is a direct selection communicator designed for use by individuals with speech or communication disabilities. This communication aid straps to the users waist. He/she simply flips through the four icon holders to select the desired message and then lightly squeezes the icon and to play the pre-recorded message. Icon holders can hold several paper icons or photos. This unit has 12 levels with recordable level announcer with a total of sixty five-second messages and 300 seconds of to

Flip Down Kit With Abductor Pad (Models 31468S, 31468M, & 31468L)

The Flip Down Kit With Abductor Pad is seating hardware general and an abductor pad designed to aid in positioning individuals who use wheelchairs. This kit includes an abductor pad, one four-inch coated steel tapered L-bracket, one 2.75-inch coated steel slotted L-bracket, one 2.75-inch coated steel extrender, one anodized aluminum hinge with push-button release, and mounting hardware. The Abductor Pad is made of textured urethane self-skinning foam and come with 10-32 T-nuts embedded in all m

Flip Top Easel

Flip top easel has a 45 degree angle with book edge for reading and a reverse 30 degree slant for writing and drawing. Skid resistant base. 18 inches wide by 16 inches high.

Flip2Sit

The Flip2Sit is a youth positioning chair designed for use by children with neurological or physical disabilities. This chair provides stable support while the child is sitting at the table and as a positioning seat for play once the removable back is detached and the chair is flipped over. The contoured latex-free seat is designed to help improve posture, sitting balance, and other functional abilities. Features include a two-way belt for extra hip stability, anti-slip pads to reduce movement,

Flipper Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Switch is activated by pressing down gently on the end of plastic spatula to activate toy, light, or tape recorder. Switch turns off when lever is released. Device is made of flexible plastic or nylon spatula, box about 6 inches long, 3 inches high and 3-6 inches wide, spring from inside a large hair curler, subminiature lever switch, masking tape and rosin core solder. SKILLS REQUIRED: Soldering. AUTHOR: Burkhart, L J TITLE: Homemade Battery Powered T

Floor Sitter (Models 7Flosc & 7Flosj)

The Foor Sitter is designed for use with children with balance, neurological, and physical disabilities. This lightweight, wipe clean plastic seat is designed to provide very firm back and lateral support and has an integrated gently molded pommel. SIZES: Child, model 7FLOSC, and junior, model FLOSJ. DIMENSIONS: The child's model accommodate 7 inch hips and is 9 inches from front to back. The back height is 7 inches. The junior model accommodates 10 inch hips and is 13 inches from front to back.

Flow Guide

CUSTOM ADAPTATION PURPOSE: To enable a man with motor neuron disease to urinate in privacy. Designed for use with a commode chair, this device consists of a vertical length of 50-millimeter PVC pipe with a PVC elbow at the top. A flexible, waterproof gooseneck made of Locline (used for applying coolant when machining metals), extends from the back of the PVC elbow. At the bottom of the gooseneck is a stainless steel tube which fits into a corresponding tube attached to the bottom front of the c

Fluidair Elite

The FluidAir Elite is an air-fluidized motorized bed designed for use by individuals with pressure ulcers, grafts and flaps, burns, and limited mobility. The FluidAir Elite healing system offers built- in scales for accurate weight monitoring and adjustable fluidization. The user can be placed in the sitting position. Variable fluidization helps facilitate user comfort and reduce the risk of dehydration. The pause feature enables the caregiver to stop fluidization to provide nursing care. The du

Fluidair Hc

The FluidAir HC is an air-fluidized motorized bed designed for use by individuals with pressure ulcers, grafts and flaps, burns, and limited mobility. The low air-loss head elevation feature allows the user to be raised to a 10 degree or 40 degree sitting position. The lightweight modular design allows for placement in a variety of home care settings. A GORE-TEX fabric cover sheet helps to prevent friction and shearing of user's skin and creates a microclimate for healing. Variable fluidization

Fluidair Ii

The FluidAir II is an air-fluidized motorized bed designed for use by individuals with pressure ulcers, grafts and flaps, burns, and limited mobility. The FluidAir II healing system offers adjustable fluidization. Variable fluidization helps facilitate user comfort and reduce the risk of dehydration. The pause feature enables the caregiver to easily stop fluidization to provide nursing care. The dual-mode cooling system helps maintain target temperature. Two built-in side steps provide access. T

Fly And Learn Globe (Model 4054)

The Fly and Learn Globe, model 4054, is an educational toy designed for use by children with severe physical, neurological or upper extremity disabilities. The toy allows children to travel all over the world making discoveries, being introduced to continents, music, highlights of ancient wonders of the world, and different languages. An easy-to-use joystick has been added to control the movement of the plane as well as the globe. The user activates the green switch at the base of the globe to l

Flying Bump & Go Elephant (Model 3127)

The Flying Bump & Go Elephant, model 3127, is a switch operated toy designed for use by children with severe physical or upper extremity disabilities. When the capability switch (not included) is activated, this toy elephant with mounted wings and halo will flap its wings, wave its ears, travel around with its bump and go action, and sing "Twinkle, Twinkle Little Star." POWER: Uses 2 AA batteries. DIMENSIONS (HxLxW): 8 x 7 x 8 inches. WEIGHT: 0.5 inches.

Flying Colors Large Textured Plate Switch

The Flying Colors Large Textured Plate Switch is a touch switch designed for use by individuals with severe physical or upper extremity disabilitie. This oval-shaped unit offers a large textured contact surface, plate-switch action, and an auditory "feedback click." This switch includes a 1/8 inch connector and 0.25 inch adapter. DIMENSIONS(HxLxW): 1 x 5 x 8 inches. COLOR: Yellow touch pad within green case.

Foam Chipping Filled Wedge (Model 9Fffw)

The Foam Chipping Filled Wedge, model 9FFFW, is a positioning wedge designed for use with children with severe physical or neurological disabilities. Filled with foam chipping, this bean-bag style support provides full body support at 15 degrees. DIMENSIONS (HxWxL): 12.5 x 36 x 42 inches.

Foam Invalid Cushion

The Foam Invalid Cushion is a foam ring seat cushion designed for use by individuals with pressure sores. This foam cushion conforms to the natural body contours of the user. Its removeable cover is machine washable and wrinkle resistant. The cover material is 50 percent cotton and 50 percent polyester. DIMENSIONS: 12.5 x 16 x 2.75 inches.

Focus (Model 818)

The Focus, model 818, is an adult wheelchair designed for use by individuals with mobility or severe physical disabilities. FRAME: The adjustable modular frame has an overall width of 26 5/16 inches. The frame sdjusts from 15.5 to 19 inches. The push handles adjust from 38 3/16 to 41 7/8 inches high. Adjustable anti-tips adjust to five different heights in 3/16-inch increments. SEAT: The seat height adjusts from 15 3/8 to 20 inches. Built-in seat extenders provide support for an extended seat.Th

Fold-Away Easel

The Fold-Away Easel is a bookholder and table top writing desk designed for use by individuals who use wheelchairs or who have upper extremity disabilities. The surface of the easel adjusts to 18, 34, or 45 degrees and features a dry-erase writing surface and a pouch for storing papers. The unit has a non-slip foam bottom, folds flat for storage, and is equipped with soft carrying handles. DIMENSIONS: 15.5 x 11.5 inches.

Foldable Shower Chair With Back (Model 9400)

The Foldable Shower Chair With Back, model 9400, is a shower chair designed for use by individuals with lower extremity, mobility, and balance disabilities who have difficulty standing in the shower. The chair folds for travel and has a seat with a horseshoe design for hygiene. The chair is equipped with a backrest and arms. DIMENSIONS: Seat height can be adjusted from 19 to 22 inches and is 16 inches x 16 inches. The width between the arms is 18.5 inches. The overall width is 21 inches open and

Folding Aluminum Ramp

The Folding Aluminum Ramp is an accessible folding ramp designed for use by individuals who use wheelchairs or scooters. Made of anodized aluminum, this ramp is trimmed at the edges with a coarse finish strip to the side to prevent slippage. The build up of ice is prevented by treads that are slotted to facilitate drainage. This ramp comes with a handle and locks and can be stored in the back of a car. DIMENSIONS: Available is 3 inches, 4 inches, and 5 inches.

Folding Bookholder (Model 73228)

The Folding Bookholder, model 73228, is a plastic device designed to hold books at a fixed angle. The device has saw tooth brackets at base to stop the pages from accidentally turning. DIMENSIONS: Open, the device is 10 x 8 x 6.5 inches; closed flat the holder measures 8.5 x 1.75 x .75 inches. WEIGHT: 2 ounces.

Folding Commode (Model 8700)

The Folding Commode, model 8700, is a folding height-adjustable commode designed for use by individuals with balance disabilities and mobility disabilities and incontinence. The folding frame enables it to be used for travel. DIMENSIONS: Seat height adjusts from 16 to 20 inches and the overall width is 20.5 inches. CAPACITY: Maximum weight capacity is 300 pounds.

Folding Hemi Walker

The Folding Hemi Walker is a hemi walker designed for use by individuals with the use of only one arm or hand. This walker folds flat for compact storage. DIMENSION (HxDxW): 30 x 18 x 12 inches. The height adjusts from 30 to 34 inches in 1-inch increments. The maximum base width is 19.25 inches. CAPACITY: 300 pounds. WEIGHT: 3 pounds 7 ounces.

Folding Safety Flag

The Folding Safety Flag is a safety flag designed for use on manual or powered wheelchairs or scooters. Designed to increase visibility, this penant-shaped flag has a folding shaft that enables the flag to fold below the user's head when entering and exiting vehicles or when not in use. COLOR: The flag is orange.

Folding Wheelchair Table

The Folding Wheelchair Table is a height-adjustable tilt top work table designed for use by children and adults who use wheelchairs. Features include a chrome-plated steel frame and side braces to ensure stability and a laminated, scratch-resistant woodgrain surface. The table can also accommodate tilt tables and it folds for storage and transport. DIMENSIONS: The height adjusts from 29 to 44 inches. The top is 30 x 40 inches, and the top tilts up to a 45 degree angle.

Food Bumper

The Food Bumper is a food guard designed for use by children and adults with upper extremity disabilities or who are blind or have low vision. This snap-on plastic bumper provides a high edge to the plate aid in moving food onto utensils. DIMENSIONS: Fits plates 9 to 11 inches in diameter. COLOR: White or translucent.

Food Catcher

The Food Catcher is a bib designed for wear by individuals with eating, swallowing, and upper extremity disabilities. Made of terry cloth and vinyl, the lightweight, woven Food Catcher is moisture proof on both sides, fastens at the neck with Velcro, and is machine-washable. A terry cloth and plastic bib model is also available. DIMENSIONS: The Food Catcher is 18 inches long.

Foot Control Bellows (Model B621A)

Foot operated pneumatic bellows connected to plastic tubing which joins remote electrical pressure switch located in appliance. Water, dust and shockproof. Air pressure switch not included. Bellow can be connected to momentary, on/off or sequencing air switches so electrical equipment can be turned on/off or sequenced with no danger of shock.

Foot Operated Air Valve Switch.

Footswitch. 2, 3, or 4 way foot operated momentary switches that control air valves. 1/8 - 27 N.P.T. input and output ports, line pressure up to 150 psi. Filtered and lubricated air supply required for best operation. Housing of iron, steel or aluminum. DIMENSIONS: Sizes vary from 5.25 x 3.25 x 1.75 inches to 2 7/8 x 2.5 x 1 1/8 inches. WEIGHT: Varies from 1/2 to 4.75 pounds.

Foot Pocket

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself solution to keep a child with severe disabilities feet warm without confining socks at night. First told the fabric in half and put a seam along both sides. This creates the inside pocket. Next flip it inside out so the seams are hidden. Then place a seam directly down the center, starting about 3 inches from the top. The seam is optional but for this DIY project a seam down the center was included so the child’s legs would

Foot Support For Wheelchair

CUSTOM ADAPTATION PURPOSE: To enable an individual with a fused knee to have leg support in a wheelchair without creating pressure beyond the ankle. This device replicates a home footstool with the length reduced so only the ankle comes in contact with it. The unit attaches to the existing front rigging of the wheelchair and can be removed when not in use. TITLE: Wheeling Easy. JOURNAL: TAD Journal. REF: Vol. 12 no. 1, Autumn 2001: p. 16. PAGES (including cover): 2 2001.

Foot Switch (6000)

The Foot Switch, model 6000, is a foot switch designed for use by individuals with upper extremity disabilities who have control of a foot. Constructed with non-skid material, this switch activates toys or devices with light foot pressure. DIMENSIONS (LxW): 3.5 x 2.5 inches.

Foot Switch Universal (Model L0902 )

The Foot Switch Universal, model L0902, is a foot switch designed for use by individuals with upper extremity disabilities who have control of a foot. Coated with an industrial strength polymerized cover, this switch activates with a light touch of the foot. DIMENSIONS: Plug is 1/8 inch in diameter.

Fracture Bed Pan

The Fracture Bed Pan is a bed pan designed for use by individuals with severe physical disabilities. This pan's low tapered front enables individuals to position themselves while lying in bed. Made of durable, lightweight polyethylene this bed pan has a back handle and is designed to be easy to clean. The pan holds 47.3 ounces.

Fracture Bed Pan

The Fracture Bed Pan is designed for use by individuals with severe physical or mobility disabilities. Made of strong polypropylene, this bed pan is easy to clean and has a wedge shape to accommodate those with fractures, those who are obese, or those who are immobile. The design also enables it to be used as a female urinal.

Frame For Bath Insert

CUSTOM ADAPTATION PURPOSE: To provide a custom adaptation of a frame for bath insert for a child with cerebral palsy. A Sunburst bath insert was purchased and a frame to mount this over the existing bath was built. A wooden model to test the fit and comfort of the proposed frame was created. Once fine-tuned, it was built by a local supplier with square stainless steel tube, which would not corrode when it gets wet. The frame fits snugly to the top of the existing bath, and has adjustable bolts

Free Standing Ball Pool

The Free Standing Ball Pool is a ball flotation therapy square designed for use with children with mobility, neurological, or balance disabilities. To create a free-standing pool, four outer walls are required. OPTIONS: Single ball pool step, set of four steps, ground sheet for ball pools and set of 1,000 balls. DIMENSIONS: The walls are available in a choice of 36 inches high x 12 inches wide or 27 inches high x 10 inches wide.

Freedom Bed

Freedom Bed is a bed with automatic turning designed for use by individuals with spinal cord injury, severe physical disabilities, or neurological disabilities. This therapeutic bed system turns the user to different stable sleeping positions, either manually or automatically. The bed is designed to mimic the body's natural nocturnal motion by mechanical repositioning in order to re-establish blood flow to compressed tissue and prevent bedsores. The horizontal surface of the bed (the paten) that

Freedom Push Chair

The Freedom Push Chair is an adult stroller designed for use by small adults or older children with lower extremity, mobility, or neurological disabilities or cerebral palsy. This lightweight folding stroller has a bent handle for pushing and can maneuver over all types of terrain, including at the beach, park, or hiking trails. This stroller includes a multi-position sun canopy with a clear window. FRAME (HxWxL): 41 x 30.5 x 66.375 inches. SEAT: Seat width is 13.375 inches and back height is 27

Freedom Safety Booster (Models 75579 & 75582)

The Freedom Safety Booster is a transfer aid designed to aid in positioniing in bed individuals with lower extremity or severe physical disabilities or spinal cord injury. This device is a flat tube of fabric with a slippery interior surface. The person to be turned is positioned on top of the tuble. The caregivers grasp the reinforced edges of the top layer and pull the device toward the headboard to move the individual up in the bed. The unit is machine washable and disinfectant safe. It shou

Freedom Scoop Plate

The Freedom Scoop Plate is a scoop dish designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. This plate has a high rear wall to assist in pushing food onto utensils. This dish includes the Freedom vacuum pad, and the plate screws onto the pad like a jam jar lid. With the pad in place, the plate sticks solidly to any smooth table or work surface and it is virtually impossible to lift or move. To remove the pad simply lift up any corner to rel

Freedom Turner (Model 75638)

The Freedom Turner is a transfer aid designed to aid in turning or transferring individuals with lower extremity or severe physical disabilities or spinal cord injury. This device is a flat tube of fabric with a slippery interior surface. The person to be turned is positioned on top of the tuble. The caregivers grasp the reinforced edges of the top layer and pulls the device toward themselves. Once the Turner is in place, it can also be used by one caregiver to turn a side-lying individual on to

Freedom Wheelchair Cup Holder

The Freedom Wheelchair Cup Holder is a wheelchair drink holder designed for use by individuals who use wheelchairs. Available for square or round tubing, this holder can also be used on scooters, walkers, rollators, and bed rails. The attached clamping mechanism tightens securely on any upright or horizontal tubing. To use, open the holder and adjust the holder's arms to hold 16- to 46-ounce cups, mugs, glasses or bottles with up to a four-inch diameter base. The holder closes flat when not in u

Freedomalert

The FreedomAlert is an emergency alert system designed for use by individuals with cognitive, balance, mobility, or severe physical disabilities or seniors. This system allows full two-way communication through the wireless pendant. This system calls up to four phone numbers programmed by the user, four programmed numbers and then 911, or 911 only. The ability to talk through the emergency pendant up to 600 feet away from the base enables the user to communicate with assistance from anywhwere in

Freehand Starter Kit

The FreeHand Starter Kit is an environmental control device designed for use by individuals with upper extremity or severe physical disabilities. This environmental control unit (ECU) allows any alternating current (AC) appliance such as lamps or fans to be activated wirelessly when used in conjunction with an X-10 transceiver module (included). The FreeHand uses radio frequencies so activation can take place from across a room or down a hall within a range of 75 feet. DIMENSIONS (HxLxW): 2.25 x

Freestanding Chrome Bowling Ramp

The Freestanding Chrome Bowling Ramp is a bowling ramp designed for use by individuals with mobility, upper extremity, or balance disabilities or spinal cord injury. Bowlers can sit or stand while using the ramp. This portable ramp is made of strong steel pipe and has four no-slide rubber feet. The unit disassembles for transportation or storage. DIMENSIONS (HxLxW): 25 x 62 x 26 inches. COLOR: Chip-resistant bright chrome finish.

Freeswitch Max (Model Fsm-100)

FreeSwitch Max, model FSM-100, is a scanning remote control switch designed for use by individuals with severe physical disabilities or spinal cord injury. It allows wireless activation of nearly any AC (alternating current) appliance, including lamps, blow dryers, fans, and popcorn makers. The system is X-10 compatible. Appliances can be activated through direct selection by touching the keypad or an external switch. For example, by connecting a Pal Pad external switch (see separate entry) to t

Freeze Dance Blue & Freeze Dance Periwinkle

Freeze Dance Blue and Freeze Dance Periwinkle are touch activated toys designed for use by children with severe physical, upper extrmity, and vision disabilities. When Blues's or Periwinkle's (sold separately) paw is pressed, they dance and move. Blue's paws move up and down as she plays her keyboard and she barks "Magenta's Coming Over." Periwinkle's head moves as he says his signature phrases into his microphone. Children can hear the "Blue's Clues Theme Song" when they press either toy's righ

Frette Crib

The Frette Crib is a circle bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this metal crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has a hand-forged iron dome and drop-side access and includes a high-density foam mattress. OPTIONS: Bedding and linens watterproof pad, and mattress pad. DIMENSIONS

Frs 3-D Fixed Position Wheelchair Mount

The FRS 3-D Fixed Position Wheelchair Mount is a communicator mounting kit for wheelchair or scooter designed for use by individuals with communication and mobility, neurological or severe physical disabilities. Designed for use with the ComLink communicators (see separate entries), the flexible mount system is available with a variety of frame clamps to allow attachment to most wheelchair or scooter configurations. The ComLink communicator attaches to the mount by sliding the communicator's mou

Frs 3-D Folding Wheelchair Mount

The FRS 3-D Folding Wheelchair Mount is a communicator mounting kit for wheelchair or scooter designed for use by individuals with communication and mobility, neurological or severe physical disabilities. Designed for use with the ComLink communicators (see separate entries), this flexible mount system is available with a variety of frame clamps to allow attachment to most wheelchair or scooter configurations. The ComLink communicator attaches to the mount by sliding the communicator's mount pla

Frs 3-D Swing-Away Wheelchair Mount

The FRS 3-D Swing-Away Wheelchair Mount is a communicator mounting kit for wheelchair or scooter designed for use by individuals with communication and mobility, neurological or severe physical disabilities. Designed for use with the ComLink communicators (see separate entries), this flexible mount system is available with a variety of frame clamps to allow attachment to most wheelchair or scooter configurations. The ComLink communicator attaches to the mount by sliding the communicator's mount

Frs Custom Solutions Headpointer

The FRS Custom Solutions Headpointer is a headwand designed for use by individuals with spinal cord injury or upper extremity disabilities or severe physical disabilities. The Headpointer can assist users with a wide range of daily tasks including communication device access, computer access, elevator operation, and light and appliance control. The lightweight head pointer features a durable one-piece plastic frame lined with high-density padding. An adjustable elastic back and chin strap keeps

Frs Ir Phone

The FRS IR Phone is a telephone option for communicator designed for use by individuals with communication or speech disabilities and severe physical or neurological disabilities. This phone can be used with existing land lines as a speaker phone to send and receive phone calls using a ComLink communicator (see separate entries). The IR Phone communicates wirelessly using infra-red with the ComLink, which has pre-built pages to control the IR phone. The pages are fully programmed but can be cust

Full-Sized Bibs

The Full-Sized Bibs are bibs designed for individuals with eating, swallowing, upper extremity, fine motor or severe physical disabilities. Made of cotton and polyester blend, these full length terry cloth bibs fasten at the neck with Velcro closure. The bibs can be machine washed. DIMENSIONS (LxW): 34 x 18 inches. COLORS: Blue, white, and other colors.

Fun Frame 3000

The Fun Frame 3000 is a golf accessory, tennis serving aid, and darts game designed for use by individuasls with spinal cord injury, or neurological or severe physical disabilities. The basic frame attaches to most manual and powered wheelchairs using Velcro straps and is fully adjustable for desired height and width. The frame is constructed of durable non-corrosive, easy-to-clean, thermoplastic material and can be transferred from one chair to another. The heavy-duty fittings used to connect

Funtastik (Model 2244)

Funtastik, model 2244, is a sensory busy box designed for use by children with cognitive and severe physical disabilities. Activate the brightly colored squishy pads to see blinking multi-colored lights, hear musical tunes and the "Little Miss Muffet" nursery rhyme, feel vibration, and watch the glitter dome and items spin about. Each sensory activation plays separately from 7 to 18 seconds. The squishy fluid in the pads moves through the center and goes back and forth when pushed or pounded. PO

Fuzzy Friends & Switches Kit (Model 4064)

The Fuzzy Friends & Switches Kit, model 4064, is a set of switch operated plush toys and touch and finger switches designed for use by children with severe physical or upper extremity disabilities or spinal cord injury. This kit includes five different plush toys along with five different switches (all also sold separately). The switches can be used to work on specific goals. Switch activation causes the animals to walk, talk, and/or make animal sounds. The set includes: Pretty Kitten, Flopp

Gallatin Water Powered Assisted Access Lift

The Gallatin Water Powered Assisted Access Lift, is a swimming pool lift designed for use by individual with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This lift lift is designed for use on the decks of in-ground and above-ground pools and spas without customization and has dual anchor points. The base stand accommodates a wide range of gutter configurations and has a design that provides high loading capacity with minimal deflection. The base stand has bu

Gem Footswitch

Foot operated momentary switch with heavy die cast metal housing and nonskid base. Safety feature prevents damage to switch if excessive force used. POWER: 7 amps, 125 volt AC, 1/6 horsepower. DIMENSIONS: 3 3/16 inches diameter x 1 7/32 inches high. WEIGHT: 1 pound.

Gem-K Footswitch (Models Gem-K3 & Gem-K36)

Foot operated momentary switch. Vinyl cover over heavy die cast metal housing. Safety feature prevents damage to switch if excessive force applied, optional lighter spring pressure model. POWER: 7 amps, 125 volt AC, 1/6 horsepower. DIMENSIONS: 4 inches diameter by 1 3/8 inches high. WEIGHT: 1.5 pounds.

Gentleman Automatic Swing Door Operator

The Gentleman Automatic Swing Door Operator is a powered door operator kit designed to convert side-hinged doors to automatic doors, enabling access to those with mobility issues. The converter allows manual use of the door by those not requiring the automatic opener. The standard kit includes a Pneumatic opener, Hydraulic closer, Liftmaster MyQ wireless controls, Latch Release Kit, 100’ air tubing, 12 VDC Solenoid, 12 VDC Power Supply, compressor fitting, and mounting hardware. Each kit also in

Gentleman Sliding Door / Pocket Door / Window Operator

The Pocket Gentleman Door Operator is a powered pocket door kit designed to provide barrier free access for people with mobility issues. Although pocket doors create more space for wheel chairs, without automation, many clients are unable to operate the door for desired privacy. The operator allows manual use of the door by those not requiring the automatic opener. This kit includes the custom pneumatic opener integrated with track, Liftmaster MyQ wireless controls, 100 feet of air tubing, 12 VD

Geribib

The GeriBib is an adult bib designed for use by individuals with upper extremity or eating disabilities or severe physical disabilities. Designed to cover the complete chest and lap area, this bib is intended for use with Geri-chairs with attached trays. The bib is draped over a Geri-chair to prevent liquids and food from falling between the armrests and seat cushion of the chair. The bib is made of durable polyester and cotton blend with a vinyl lining. Features include a Velcro closure that se

Get Help Now Medical Alert System

The Get Help Now Medical Alert System is an emergency alert system with monitoring service designed for use by seniors, individuals with mobility or balance disabilities, or individuals at risk for medical emergencies. Three models are available: The Basic system, the Best Buy system, and the Power House system. Each system includes a button transmitter pendant worn around the neck on the included beaded acrylic chain or on the wrist with the included wristband and a speaker box that plugs into

Gewa Access Maxi

Gewa Access Maxi is a wireless computer and environmental control keyboard with large keys designed for use by individuals with fine motor disabilities, mobility disabilities, or spinal cord injury. This wireless keyboard controls a computer through remote infrared (IR) using the included mouse interface. The keyboard has two levels, one for the computer and one for environmental control. Input is through direct selection. Macros and multi-function environmental control commands can be recorded

Gewa Control Prog

The GEWA Control Prog is a remote controller for an environmental control system designed for use by individuals with mobility disabilities, severe physical disabilities, or spinal cord injury. This hand-held infrared transmitter can learn channels from other remote controls such as TV and video or function within the GEWA Infra-Link system using either direct selection or scanning. This 15-level programmable transmitter can send 241 signals to control environmental devices, including security-c

Gimpgear Roughneck Dual Pushbutton Switches

RoughNeck Dual Pushbutton Switches are touch switches designed for use by individuals with upper extremity disabilities. These feather-touch switches provide auditory feedback, allowing users without sensation in their hands to hear successful activation. The switches are rugged and can be used on wheelchair armrests and other demanding applications. The switches are compact enough to imbed into wheelchair armrest foam. DIMENSIONS: 2.3 x 1.38 x 0.8 inches.

Gimpgear Roughneck Single Button Switch

The GimpGear RoughNeck Single Pushbutton Switch is a buttonswitch designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This feather-touch switch provides auditory feedback, which allows users without sensation in their hands to hear successful activation. The switch is rugged for use on wheelchair armrests and other demanding locations, and can be imbedded into wheelchair armrest foam. It can also be used as a head switch when properly mounted.

Gimpgear Ultra-Precision Usb Joystick Mouse & Pc Game Controller

The GimpGear Ultra-Precision USB Joystick Mouse and PC Game Controller is a joystick mouse interface designed for use by individuals with upper extremity or neurological disabilities or cerebral palsy. This digital joystick utilizes differential magnetic fields without any mechanical parts to provide smooth operation. A sticky rubber joystick wrap prevents slipping. The user rests a hand passively over the teardrop shaped joystick handle for mouse pointer control. The unit has three large built-

Girder Automation Software (Standard, Pro, & Whp)

Girder Automation Software is a home automation program designed for use by individuals with mobility or severe physical disabilities. This program comes in three versions, Standard, Pro and Whole Home Pro (WHP). Girder Standard is designed solely for controlling applications running on the same PC using an infrared or wireless remote control. It allows the user to control digital media players such as WinAmp or Windows Media Player and play DVDs in home theater programs. Girder Pro and WHP are

Glacier The Polar Bear (Model 914)

Glacier the Polar Bear, model 914, is a switch operated toy designed for use by children with upper extremity or severe physical disabilities or spinal cord injury. This plush toy has been adapted with a jack for a switch (not included), and when the switch is activated, this bear walks and stands on his hind legs growling . POWER: Uses three double-Abatteries (not included). DIMENSIONS: 9 x 6 inches. COLOR: Cream.

Glitter Roll Music Box & Switch (Model 696)

The Glitter Roll Music Box and Switch, (model 696), is a rotating cylinder switch and adapted music box designed to provide multi-sensory stimulation for children with physical, cognitive and/or sensory disabilities. The clear cylindrical roller contains a potpourri of sparkling shapes which, when rotated, activates the music box. The cylinder is mounted on a white plastic base with suction cup feet. The device can also be used as an external capability switch without music when connected to a t

Glo Worm With Switch (Model 8014)

The Glo Worm with Switch, model 8014, is a switch operated toy designed for use by children with upper extremity, severe physical, cognitive, or emotional disabilities or spinal cord injury. Press the attached capability switch or squeeze the toy and the Glo Worm comforts with a gentle light and lullabies. POWER: Uses 3 double-A batteriess. DIMENSIONS (LxW): 10 x 7 inches.

Glow Dome (Model 7501)

The Glow Dome, model 7501, is a switch operated toy designed for use by children with upper extremity or severe physical or spinal cord injury. Users can color on the dome with one of six brightly-colored glow markers and then activate a connected capability switch (not included) to cause lights to flash, the pictures to glow, and the dome to rotate at adjustable speeds. The set includes six glow markers, two drawing surfaces, and two starter scenes. POWER: Uses 3 double-A batteries. DIMENSION

Glow Switch

The Glow Switch is a touch switch designed for use for individuals with upper extremity or severe physical disabilities and low vision. The domed shape and the backlit surface aid in locating the switch. The dome remains lit until the switch is pressed. POWER: Uses four double-A batteries. DIMENSIONS: The outer diameter of the dome is 4.5 inches.

Glowing Goo Tube (Model 3043)

The Glowing Goo Tube, model 3043, is a switch-operated toy designed for use by children with severe physical or upper extremity disabilities. Activate a connected capability switch (not included) and the goo-filled tube rotates while music plays and a powerful light illuminates the goo flow. Activation time is adjustable from 0 to 50 seconds. POWER: Uses 4 C batteries. DIMENSIONS (LxWxH): 10 x 9.5 x 9.5 inches.

Glowing Seahorse With Switch

The Glowing Seahorse with Switch is a switch operated toy designed for use by children with upper extremity or severe physical disabilities or spinal cord injury. This soft toy has a glowing light on its tummy and plays eight soft melodies and ocean sounds when the attached capability switch (included) is activated. Activating the switch a second time turns the toy off. POWER: Uses 3 triple-A batteries. DIMENSIONS (LxWxH): 11 x 6 x 4.5 inches.

Go Go Dump Truck (Model 329)

The Go Go Dump Truck, model 329, is a switch-operated remote control toy designed for use by children with severe physical, mobility, or upper extremity disabilities. This toy truck comes with a play set consisting of three boulders and two barricades. The truck is operated with a radio remote control, which can be connected to a capability switch (not included). POWER: Truck uses 3 double-A batteries; remote control uses one 9-volt battery. DIMENSIONS (HxLxW): 6 x 9 x 4.5 inches. COLORS: Red an

Go-Kart

The Go-Kart is a powered cart designed for use by children or adults with lower extremity, mobility, neurological, or severe physical disabilities. FRAME (LxW): Seat on a yellow platform measuring 65 x 37.5 inches. The cart can operate on gravel, grass, and hard surfaces, with a ground clearance of 4 inches and a turning radius of 10 feet. CONTROLS: Joystick or switch control. UPHOLSTERY: Blue. BRAKES: Electric. WHEELS: 12-inch diameter pneumatic tires. FOOTRESTS: The user's feet rest on the fr

Golf Club Tube

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adaptation of a golf club for a child with mobility and severe physical disabilities. The child has limited movement in swinging a golf club from his wheelchair even with assistance. The child's mother had observed a teacher using a long plastic pipe with students to roll a golf ball through a target. The adaptation had a straight tube, which would not work well with this particular child. The parents bought several sections of 2 x

Good Grips Utensil Strap

The Good Grips Utensil Strap is a utensil holder designed for use by adults and young children with upper extremity or grasping disabilities or spinal cord injury. It is an expandable loop strap that attaches to the handle of a Good Grips utensil and slips over the user’s hand. The standard size strap fits most adults and accommodates all Good Grips utensils as well as other large or built-up handles. The pediatric size strap fits the Good Grips Pediatric Spoon. The straps are machine washable.

Google Keyboard Shortcuts

Google Keyboard Shortcuts are a keyboard modification program designed to enable individuals with upper extremity disabilities who cannot use a mouse to navigate through Web search results. These Shortcuts allow the user to explore search results quickly without taking their hands from the keyboard to use the mouse. After a search is performed, the user begins with the "K" key, located under the right middle finger. Press "K" once to bring up the colorful balls and then as needed to move dow

Gooseneck Feeding Device.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Gooseneck holder for spoon to provide resistance against uncontrollable arm movements. A gooseneck with an angle clamp can be purchased. A lock-on accessory with a push button release is attached to the end of the gooseneck and silver brazed to the eating utensil to be used. In the example described a T bar handle was also brazed onto the end of the utensil to provide better support for a person with uncontrolable movement. A commercially available laz

Gooshy Switch (Models 634, 635, & 636)

The Gooshy Switch is a touch switch designed for us by individuals with severe physical or upper extremity disabilities. This large switch has a durable, squeezable, pillow-like top with a sparkling surface. Model 634 is a momentary switch that activates a connected toy or device while pressed. Model 635 adds vibration when the switch is activated. Model 636 provides lights, music, and vibration and can be used with a connected device or alone as a sensory toy. power: Uses two double-A batteries

Gore Reading Stand (Model 1-03210-00)

The Gore Reading Stand, model 1-03210-00, is an adjustable bookholder designed for use by individuals with low vision for holding reading material at the proper distance, or by individuals with physical disabilities who have difficulty holding a book. This bookholder fastens to most table top surfaces by means of a clamp. Its jointed metal arm permits a wide range of adjustment. The bookholder is also easily disassembled for compact storage and carrying. DIMENSIONS (HxW): Bookrack portion is 16.

Grab-It (Model 2309)

The Grab-It, model 2309, is a switch-controlled toy designed for use by children with severe physical or upper extremity disabilities. The goal of this arcade-style game is to grab small toys and other prizes out of a tank with a mechanical claw before time is up. The toy has been adapted to make it possible to control the claw and grab the prizes using large colorful plates with arrows. This toy comes with 48 prizes (small toys and coins) and features a timed arcade soundtrack that lets the pla

Grasp Switch

The Grasp Switch is a squeeze switch designed to be activated by pinching or squeezing for individuals with upper extremity disabilities. The tube-shaped switch features a foam hand grip that is soft to the touch while providing firm support. Activation requires 11 ounces of pressure. There is no auditory or tactile feedback provided. DIMENSIONS: The switch is 5.5 inches long and 1.4 inches diameter.

Grasp Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Squeeze switch used to activate tape player or battery operated toy can encourage child to develop grasping skills. Switch is constructed using a 3 inch section of 3/8 inch copper pipe, 4 copper U brackets, conductor wire, a subminiature plug and foam rubber strips. Includes diagrams. SKILLS REQUIRED: Soldering. AUTHOR: Burkhart, L J TITLE: More Homemade Battery Devices for Severely Handicapped Children with Suggested Activities REF: Millville, Pennsyl

Grasp Without Hands.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Forceps modified to be mouth operated by a quadriplegic client, allowing items to be picked up. Used to operate stereo controls, cooking, doing jigsaw puzzles and picking up small items (i.e. taking cookies from a jar). Describes modification to surgical sponge forceps, including a molded mouthpiece made by a dental technician from an impression of the client's teeth made by a dentist. Also describes a holder for the "mouthforceps." Includes photograph

Gravity Feed Cup (Model 16T177A)

The Gravity Feed Cup, model 16T177A, is a gravity assisted cup designed for use by individuals who have difficulty drinking. This eight-ounce cup assists with drinking using gravity. Liquid intake is controlled by adjusting the position of the cup. A caregiver can position the cup to the desired level as the user sips the liquid through L-shaped straws inserted in the connector near the bottom of the cup. Twelve straws are included and replacements are available in supermarkets. This cup is hand

Greenmont's Easypushbar

Greenmont’s easyPUSHBAR is a wheelchair push handle extension designed for use by a companion or caregiver when pushing a manual wheelchair. This stabilizing push bar spans the push handles of a wheelchair to make pushing easier for very tall people or people with lower back pain. Its ergonomic design allows for one-hand maneuvering and comfortable hand positioning. When using both hands, the push bar transfers power directly to the chair with less effort when navigating steep ramps, inclines,

Grid 2

The Grid2 is a voice output direct selection and symbolic communicator program for creating symbolic or text communicator grids designed for use by individuals with communication, speech, neurological or severe physical disabilities or autism. The Grid 2’s basic function is to allow a person to use a computer as a voice output communication aid, using symbols or text to build sentences; however, it also can access the Windows desktop with its built-in computer control features to operate other p

Griffin Mouthstick Stylus

The Griffin Mouthstick Stylus is a mouthstick for tablet computer designed for use by individuals with upper extremity disabilities, spinal cord injury, or severe physical disabilities. This capacitive touchscreen stylus is designed to be held in the mouth, allowing people with limited or no use of their hand to manipulate both touchscreen and button on smartphones and tablet devices. The Y-shaped mouthpiece is made of food-grade stainless steel and the removable cushion sleeves are BPA-free. Th

Grip And Puff Switch (Model 700, 700-X)

The Grip and Puff Switch is both a squeeze switch and a pneumatic puff switch designed for individuals with physical disabilities. The vinyl grip, a rubber cylindrical air bellows is connected by a tube to a switching unit. Grasping the cylinder and exerting slight pressure activates the switching unit, which functions as a regular switch. The grip can also be removed and used as a puff switch. This product comes with a standard 0.25 inch jack and plug and can be ordered with a 1/8 inch jack and

Grip Bar And Book Rest.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Book rest with hand grips for a child with cerebral palsy. Instructions for building a book rest with hand grips. Consists of a base of 10 by 20 inch plywood; a book rest of 1 by 1 by 9 inch softwood; and two end pieces (1 by 3 by 4 inches) with holes drilled in them to take a 20 inch long 3/4 inch dowel. Includes drawings and photograph. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, En

Grip Switch

The Grip Switch is a squeeze switch designed for use by individuals with upper extremity disabilities. This pneumatic switch activates with a slight squeezing pressure on the grip (five grips in different sizes are included to accommodate growth, change in ability, or multiple users). The switch can be used with any switch-adapted toy or appliance equipped with a 1/8th-inch jack. DIMENSIONS: All grips are four inches long. They range in diameter from 3/8 inch to .75 inch. COLOR: The grips are fi

Grip Switch Kit (Model 701)

The Grip Switch Kit is a squeeze switch accessory for individuals who have physical disabilities. It consists of colored tubular grips designed to be interchangeable with the grip on the standard Grip and Puff Switch (model 700, see separate entry). Each kit comes with 5 grips. DIMENSIONS: Approximately 4 inches in length, with varying diameters between 3/8 to 3/4 inches.

Grip Tilt Switch Kit (Model 998-K)

The Grip Tilt Switch Kit , model 998-K, is a grip switch designed for use by individuals with severe physical or upper extremity disabilities. This kit includes four soft tube switches that activate connected devices when held upright. DIMENSIONS: 5/8 inch, 0.75 inch, 7/8 inch, and 1 1/8 inch in diameter.

Grocery Signs And Words

Grocery Signs and Words is a personal skills and independent living skills tutorial program designed for use with individuals with cognitive or developmental disabilities. This program teaches 250 signs and words which are essential for shopping in a grocery store. Categories include shopping terms (aisle, cart, checkout, etc.); beverages (apple juice, water, lemonade, etc.), health and beauty (aspirin, cough drops, shampoo, etc.); frozen foods (chicken breasts, pizza, frozen dinners, etc.); pro

Grow With Me Chair

The Grow With Me Chair is a straddle chair designed for use by children with neurological or physical disabilities. This chair with footplate offers height and depth adjustments to accommodate the child's stages of growth from infancy through young adulthood. The chair can be used at any standard-height table and each chair includes a three-point pelvic seatbelt for ages 12 months to small adult. OPTIONS: Padded seat and back cushion, grab bar, and wooden activity tray. DIMENSIONS (HxDxW): 33 x

Growth Guidance Systems (Ggs)

Growth Guidance Systems (GGS) are child's tilt-in-space wheelchairs designed for use by children with mobility, neurological, or severe physical disabilities. FRAME (WxL): The frame is available in Toddler 1, Toddler 2, Toddler 3, Youth 1, Youth 2, Youth 3, Junior Adult 1, Junior Adult 2, or Junior Adult 3 configurations. The standard frame is a folding step-release tilt-in-space frame. Also available are a folding base with manual release tilt and a rigid base with or without step-release tilt.

Guardian Easy Care 1000 Transport Wheelchair

The Guardian Easy Care 1000 Transport Wheelchair is a transport wheelchair designed for use by individuals with severe physical disabilities who require assistance for wheelchair mobility. FRAME: Choice of chrome-plated carbon steel or anodized aluminum frame. SEAT: Choice of 19 inch and 17 inch seat widths. UPHOLSTERY: Padded nylon upholstery. ARMRESTS: Full-length arms. WHEELS: Eight inch wheels in front and back. FOOTRESTS: Swing away removable footrests. WEIGHT: The aluminum model weighs 19

Guardian Easy Care 1000 Wheelchair

The Guardian Easy Care 1000 Wheelchair is a manual wheelchair designed for use by individuals with walking disabilities and mobility disabilities. FRAME: Chrome-plated, carbon steel frame. SEAT: Choice of seat widths of 16 inches and 18 inches. UPHOLSTERY: Vinyl upholstery is flame retardant. ARMRESTS: Fixed full length armrests. WHEELS: Composite mag wheels are molded with contours. Sealed bearings are maintenance free. FOOTRESTS: Fixed footrests.

Guardian Easy Care 2000 Wheelchair

The Guardian Easy Care 2000 Wheelchair is an adult manual wheelchair designed for use by individuals with mobility disabilities. It is equipped with a dual axle which allows the seat to be lowered to hemi height. There is a full sized chart pocket on the backrest. FRAME: The frame is chrome-plated, carbon steel with front rigging mounts. SEAT: The seat widths are 16 or 18 inches. ARMRESTS: A choice of padded removable desk-length or fixed full-length armrests is offered. WHEELS: Composite mag

Guardian Easy Care 2000Hd Heavy-Duty And Extra Wide Wheelchairs

The Guardian Easy Care 2000HD Heavy-Duty and Extra Wide Wheelchairs are heavy duty wheelchairs designed for use by large or obese individuals with mobility disabilities. These extra wide adult manual wheelchairs have extra wide seats and reinforced construction. FRAME: The heavy-duty reinforced chromed steel frame has a dual axle which allows the seat (20-inch widths only) to be lowered to hemi height. SEAT: Available in 20-inch heavy duty and 22-inch or 24-inch extra wide seatss. UPHOLSTRY:

Guardian Easy Care 3000 Lightweight Wheelchair

The Guardian Easy Care 3000 Lightweight Wheelchair is a lightweight wheelchair designed for use by individuals with mobility disabilities. FRAME: Chrome-plated, carbon steel frame. Dual axle allows seat to be adjusted to hemi height. SEAT: Seat widths of 16, 18, or 20 inches are available. UPHOLSTERY: Padded nylon. ARMRESTS: Removable desk arms with padded armrests. WHEELS: Scratch-resistant composite handrim. FOOTRESTS: Swingaway footrests or elevating legrests are interchangeable with the in

Guardian Easy Care 4000 High-Strength Lightweight Wheelchair

The Guardian Easy Care 4000 High-Strength Lightweight Wheelchair is a lightweight wheelchair designed for use by individuals who require a high-strength standard wheelchair. FRAME: The frame design eliminates seat guides and allows for custom backs and accessories. SEAT: Seat widths of 16, 18, or 20 inches are available. Height adjustable seat backs (16, 17, or 18 inches) are offered. ARMRESTS: Flip-back arms with an easy release mechanism. FOOTRESTS: Swingaway footrests or elevating legrests a

Guardian Escort Wheelchair

The Guardian Escort is an adult manual wheelchair designed for use by individuals with physical disabilities, lower extremity disabilities, and mobility disabilities. FRAME: scratch- and rust-resistant frame with silver finish. UPHOLSTERY: Padded nylon or vinyl. ARMRESTS: Features a three-point anchor and toggle release for secure attachment and ease of removal. Full- length, traditional or standard desk legth arms with armpads are available. BRAKES: Spring-assisted wheel locks. FOOTRESTS: Optio

Guide Light 911

The Guide Light 911 is a strobe light and blinking locator designed to guide emergency response personnel to the location from where a “911” call is placed by individuals with physical disabilities, seniors or people who are confined to a bed. The Guide Light has two parts – a transmitter and the strobe light. The transmitter is plugged into an standard telephone jack, and when a “911” call is placed, it transmits a wireless signal to activate the light. The high intensity Xenon strobe light i

Guitar Hero Controller (Model 4065)

The Guitar Hero Controller, model 4065,is a modified game controller designed for use by individuals with severe physical or upper extremity disabilities. This tabletop control center enables users to play five colored buttons in sync with the musical notes. This controller has a select button, an up arrow to select the song, and a start/stop button. An easy beginner level allows the user to hit any colored button to go to the beat of the music without having to follow a pattern. The guitar is f

Gumball Switch (Models 782B, 782G, 782P, 782R & 782Y)

The Gumball Switch is a touch switch designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. Intended for users who can access a smaller target area, this switch has a detachable mounting base and provides audible and tactile feedback. A clear plastic cover is included. DIMENSIONS: The activation surface is 2.5 inches, the base is 3.25 inches, and the switch is 0.75-inch high. COLOR: Available in blue, green, purple, red, or yellow.

Gus! Dwell Cursor

Gus! Dwell Cursor is a mouse emulator program designed for use by individuals with upper extremity disabilities. The program emulates left and right clicks, double click, adjustable drag sensitivity, as well as offering the choice of auditory feedback. This software utilizes dwelling, a feature that enables the user to move the cursor over an item to be "clicked" ans have the cursor automatically activate the click. The cursor activation time can be set from 0.5 to 4 seconds. The program's toolb

Gus! Joystick Control

Gus! Joystick Control is a mouse emulator program designed for use by individuals with upper extremity disabilities. This program enables a common gaming joystick or game pad to control the cursor in the same way a mouse does. The trigger and fire buttons are converted to mouse click buttons. The user can select which joystick button issues a left or right click or performs an automatic button action (single, double, or drag) after a selected delay period. Joystick/cursor movement sensitivity is

Gus! Scanning Cursor

Gus! Scanning Cursor is a mouse emulator program designed for use by individuals with upper extremity disabilities. This program moves the cursor and provides an interface to activate mouse buttons using one or two switches. Provided functions include mouse movement, click, double click, and drag using one or two switches or the left click mouse button. This program features adjustable scanning speed and auto scanning menus to access menu items such as file, open/close, etc. Automatic scanning

Gymnastik Ball

Gymnastik Balls are inflatable seamless molded vinyl balls designed specifically for therapy and exercise for children with neurological, balance, or severe physical disabilities. DIMENSIONS: Balls are available in 12-, 16-, 20-, 24-, 33-, 37- or 49-inch diameters. OPTIONS: Wall-mounted ball storage holders. COLOR: Assorted bright colors depending on size.

Gyroset

---- PROTOTYPE --------- PURPOSE: To create a prototype a wireless headset wheelchair control system for individuals with severe disabilities and/or quadriplegia. Individuals who are paralyzed from the neck down have a limited number of options to control their wheelchairs (i.e., joysticks, sip and puff tubes). Márton Juhász and Now Technologies, a Hungarian firm, have developed the GyroSet, an Android tablet-powered system that allows a person to use head movements to guide a powered wheelchair

H Base Overbed Table (Models 11600 & 11610)

The H Base Overbed Table, models 11600 and 11610, is an overbed table designed for use by individuals with mobility or severe physical disabilities. The table has a four point H-shaped base with four dual wheel nylon casters, two of which lock. Plastic glides are also included to replace the casters. The table also features spring-loaded height adjustment. DIMENSIONS(LxW): 26.38 x 15.25 inches (base); 30 x 15 inches (tabletop). The height of the table adjusts from 26.75 to 43.25 inches. CAPACITY

H-31 Dual Button Box

The H-31 Dual Button Box is a computer switch control interface designed to enable individuals with severe physical, motor control, neurological or upper extremity disabilities or spinal cord injury to control a 2-switch adapted device. The user plugs the switch input of the device he or she wishes to control into the back of the Dual Button Box. One button on the Dual Button Box will "step scan" through the device's menu or options. When the user reaches the desired option or action, he or she

H-36 Ipad/tablet Combo Stand

The H-36 iPad/Tablet Combo Stand is a stand for tablet computer and a keyboard tray designed for use by individuals with use of one hand, grasping or upper extremity disabilities, or arthritis. This lightweight, flexible, rugged and versatile stand holds both a keyboard and an iPad/tablet. The keyboard trays are designed at a steep angle which reduces head-bobbing. The individual parts (iPad/tablet shelf and keyboard trays) are attached by Super-Velcro so the users can adjust the parts themselve

H-46 Scanover (Scanning Voiceover Switch Interface)

The H-46 ScanOver (Scanning VoiceOver Switch Interface) is a computer switch control interface designed to enable individuals with severe physical, motor control, neurological or upper extremity disabilities or spinal cord injury to control an Apple iPad with a switch. This unit has a speaker and headphone jack, a front panel showing the status of the Bluetooth module inside, and a rear panel for the scanning options. The user turns VoiceOver on with triple click and starts scanning with either

H-46-2Gb Switch-Adapted Mp3 Player Drive

The H-46-2GB Switch-Adapted MP3 Player Drive is an adapted MP3 player designed for use by individuals with fine motor, neurological, or severe physical disabilities. This unit has two switch inputs, one of which can be used to turn the unit on/off and to toggle between Play and Pause, and the other of which can be used for cycling through files. The unit plays MP3 and WMA audio files, including music, podcasts, or audio books, and is also a two-gigabyte (GB) USB flash drive that plugs into any U

H-68 Scan-5

The H-68 Scan-5 is a computer switch control interface designed to enable individuals with severe physical, motor control, neurological or upper extremity disabilities or spinal cord injury to control a TV, Apple iPod, voice recorder, MP3 player, DVD player or switch-adapted toy/device with a switch. This stand-alone device can be used by a person that can operate one or two switches. The user plugs a switch-adapted remote control or device that he or she wishes to control into the Scan-5's 9-pi

H-69 Select-5

The H-69 Select-5 is a control input interface designed to enable individuals with severe physical, fine motor control, neurological or upper extremity disabilities or spinal cord injury to control a TV, Apple iPod, voice recorder, DVD player, MP3 player or a switch-adapted toy or appliance. This stand-alone device features 5 large round buttons: Power/play/pause; Advance forward or Channel up; Go backward or Channel down; Volume up; and Volume down. The user connects a device or remote control

H-86: Capacitive Headpointer

The H-86: Capacitive HeadPointer is a headwand and stylus for tablet computer and touchscreen designed for use by individuals with grasping or upper extremity disabilities, spinal cord injury, or severe physical disabilities. This product is a combination of a capacitive mouthstick and a headpointer, allowing people with limited or no use of their hands to use an iPad and other tablet devices that have a capacitive touchscreen. The fit of the H-86 headpointer is adjustable with a "dial." The mou

H-Harness (Models 31441, 31442, & 31443)

The H-Harness is a harness restraint designed to aid in the proper positioning of individuals who use wheelchairs. The harness fastens over the shoulders and arround the waist and attaches to the wheelchair with the grommeted reinforced nylon webbing straps. The cushioned nylon shoulder straps with reinforced webbing attach together with quick-release buckles. SIZES: Model 31441 is small, model 31442 is medium, and model 31443 is large.

Hair Washing Tray (Model 1665)

The Hair Washing Tray, model 16665, is a shampoo basin designed for use by individuals with mobility disabilities or who use wheelchairs. Recommended for individuals 5 years old and older, this plastic unit assists caregivers in shampooing the hair of individuals who use wheelchair or cannot shampoo independently. The unit features a built-in neck opening, water drain channel, and a strap that fits under the arms to hold the tray in place. The neck opening offers support and reduces strain when

Hal 2000 Home Control System

HAL 2000 Home Control System is an environmental control unit program designed for use by individuals with severe physical disabilities, spinal cord injury, and upper extremity disabilities. It enables the user to control any number of lights, appliances, and other devices through a computer using voice input. Lighting and appliances can be turned on and off, and the user can set schedules, with voice commands delivered via telephone or computer-connected microphone. Commands can also be deliver

Hal Basic Home Control System

HAL Basic Home Control System is an environmental control unit program designed for use by individuals with severe physical disabilities, spinal cord injury, and upper extremity disabilities. It allows the user to control lighting, appliances, and other devices through a computer with voice input, which is received by the computer via microphone. Lighting and appliances can be turned on and off by voice command, or the user can set schedules by voice. When commands are carried out, the program p

Hal Deluxe Home Control System

HAL Deluxe is an environmental control unit program designed for use by individuals with severe physical disabilities, spinal cord injury, and upper extremity disabilities. It enables the user to control lights, appliances, and other devices through a computer using voice input. Lighting and appliances can be turned on and off, and the user can set schedules, with voice commands delivered via telephone or a microphone connected to the computer. When commands are carried out, the program provides

Haley's Joy On-The-Go 1 Swing System With Reagan’s Ride Upright Soft Seat Attachment

Haley’s Joy On-the-Go 1 Swing System with Reagan’s Ride Upright Soft Seat Attachment is a portable swing designed for children and adults with physical and neurological disabilities. This portable swing can be set up in a few minutes without tools. The swing is secured through snap-button assembly. Haley’s Joy comes complete with swing frame, dual hanging points for linear swinging, mat, and duffel bag. The mat is lightweight and made of a high-strength fabric with floor grippers underneath

Haley's Joy On-The-Go 1 Swing System With Sensory Wrap Attachment

Haley’s Joy On-the-Go 1 Swing System is a portable swing designed for children and adults with physical and neurological disabilities. This portable swing can be set up without tools. The swing is secured through snap-button assembly. Haley’s Joy comes complete with swing frame, dual hanging points for linear swinging, mat, and duffel bag. The mat is lightweight and made of a high-strength fabric with floor grippers underneath to keep it stable. It is 100% latex-free. The swing frame and mat

Haley’s Joy On-The-Go 2 Swing System With Large Platform Board (48” X 24”) Attachment

Haley’s Joy On-the-Go 2 Swing System with Large Platform Board (48" x 24") Attachment is a portable swing designed for children and adults with physical and neurological disabilities. This portable swing can be set up in a few minutes without tools. The swing is secured through snap-button assembly. Haley’s Joy comes complete with swing frame, dual hanging points for linear swinging, mat, and duffel bag. The mat is lightweight and made of a high-strength fabric with floor grippers underneath

Haley’s Joy On-The-Go 2 Swing System With Reagan’s Ride Upright Soft Seat Attachment

Haley’s Joy On-the-Go 2 Swing System with Reagan’s Ride Upright Soft Seat Attachment is a portable swing designed for children and adults with physical and neurological disabilities. This portable swing can be set up in a few minutes without tools. The swing is secured through snap-button assembly. Haley’s Joy comes complete with swing frame, dual hanging points for linear swinging, mat, and duffel bag. The mat is lightweight and made of a high-strength fabric with floor grippers underneath t

Haley’s Joy On-The-Go 2 Swing System With Sensory Wrap Attachment

Haley’s Joy On-the-Go 2 Swing System with Sensory Wrap Attachment is a portable swing designed for children and adults with physical and neurological disabilities. This portable swing can be set up in a few minutes without tools. The swing is secured through snap-button assembly. Haley’s Joy comes complete with swing frame, dual hanging points for linear swinging, mat, and duffel bag. The mat is lightweight and made of a high-strength fabric with floor grippers underneath to keep it stable.

Haley’s Joy On-The-Go 2 Swing System With Small Platform Board (32” X 24”) Attachment

Haley’s Joy On-the-Go 2 Swing System with Small Platform Board (32" x 24") Attachment is a portable swing designed for children and adults with physical and neurological disabilities. This portable swing can be set up in as little as two minutes without tools. The swing is secured through snap-button assembly. Haley’s Joy comes complete with swing frame, dual hanging points for linear swinging, mat, and duffel bag. The mat is lightweight and made of a high-strength fabric with floor grippers

Haley’s Joy On-The-Go 3 Swing System With Reagan’s Ride Upright Soft Seat Attachment

Haley’s Joy On-the-Go 3 Swing System with Reagan’s Ride Upright Soft Seat Attachment is a portable swing designed for children and adults with physical and neurological disabilities. This portable swing can be set up in as little as two minutes without tools. The swing is secured through snap-button assembly. Haley’s Joy comes complete with swing frame, dual hanging points for linear swinging, mat, and duffel bag. The mat is lightweight and made of a high-strength fabric with floor grippers u

Half Pad (Models 1320-01, -21, -31,-32, -33, 1330-01, -21, -31, -32, & -33)

The Half Pad is a torso support designed for use by individuals with severe phnysical disabilities or spinal cord injury while in a wheelchair. Curved to body contours, it can adapt to many positioning applications. The Half Pad is made of 16 gauge steel, zinc plated, and formed with recesses for ##10-32 press nuts to attach it to the wheelchair. The recess is placed vertically to the side of the pad. The Trunk Pad has padding and is available covered with a variety of upholstery. OPTIONS: Avail

Hand Switch (Model Tah-180)

The Hand Switch, model TAH-180, is a ribbon switch call signal designed for bed patients to signal for help or assistance by flexing or squeezing. These sealed vinyl switches require an operating force of 0.5 pounds and are normally-open, momentary-contact switches. DIMENSIONS: Switch is 2 x 5 x 0.375 inches. COLOR: White.

Hand Therapy Table (Model 561168)

The Hand Therapy Table, model 561168, is a hand/wrist/forearm exercise table designed for use in physical therapy. This therapy table is equipped with an adjustable crank hydraulic lift system for height adjustment. The laminated table top has front and back cutouts and the telescopic table legs are aluminum with a laminated base that has levelers. DIMENSIONS (HxLxW):26 to 38 x 48 x 32 inches. Table top cut out is 4 x 24 inches. The hydraulic life system adjusts height from 27 to 39 inches. CA

Hand To Hand Mug W/ Spout

The Hand to Hand Mug With Spout Lid is designed for those with grasping disabilities, Parkinson’s or for individuals who do not have steady hands especially while drinking. The ribbed or contoured shape of the mug makes the ability to grasp or hold it with one or both hands. It's large handle is large enough for large hands to grasp it comfortably. Also designed to hold hot and cold liquids at a constant temperature. Top rack dishwasher and microwave safe. Not returnable.

Hand Utility Cuffs

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual without fingers or without the use of hands to use a variety of tools and implements. The cuffs are made from Velcro with a canvas pocket. They are fastened in place by gripping the D-ring at one end with the teeth and rolling the Velcro together under the chin. The canvas pocket, open on one end, then holds pens, pencils, eating utensils, pliers, etc. TITLE: Hand Utility Cuffs. WEB SITE: Workshop Solutions at http://www.workshopsolutions

Handcycle Elite

The Handcycle Elite is a hand-propelled recumbent cycle designed for use by individuals with severe physical or lower extremity disabilities or spinal cord injury. The Handcycle Elite features Shimano components, including Dura-Ace Chain Ring, XTR-Shadow Derailleur, XTR RapidFire Shifters, XTR titanium cassette, SRAM Hollow Pin Chain, and Ergo-Lite handgrips. FRAME: The seat frame is (LxW) 16 x 16 inches. The frame, fork leg hanger and clamps are made of magnesium alloy, and it has titanium hard

Handi-Grip Portable Grab Bars

Handi-Grip Portable Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. These telescoping bars attach to most smooth surfaces such as marble, glass, or tile, with strong suction cups at each end. Flip switches at each end anchor or release the bar. Most models are available with or without a safety indicator: When the rocker is flat to the lever, the suction is adequate for the load, when the warning rocker rises and the red edge shows, release and

Handi-Holder

Handi-Holder is a wheelchair drink holder designed for use by individuals with mobility disabilities. The unit attaches to tubular areas of wheelchairs, walkers, and scooters to carry drinks and other items. The unit is removable without tools or fasteners from its mounting to allow accessibility for transfers. This rugged drink holder mounts securely at convenient locations on swing away footrests and other tubular areas. OPTIONS: Additional mounts and custom modifications. DIMENSIONS: Models a

Handicapped Walk-In Bathtub (Model Rh4)

The Handicapped Walk-In Bathtub, model RH4, is an accessible bathtub designed for use by individuals with arthritis, balance or lower extremity disabilities, spinal cord injury, or severe physical disabilities. This institutional-style walk-in bathtub is designed for home use and can be used by both ambulatory and non-ambulatory individuals. It offers full emersion while sitting and wheelchair transfer capability, and is compatible with most transfer devices. Its lift access opening allows for u

Hands-Free Faucet Controller

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with upper extremity disabilities to operate a faucet. The faucet controller attached to a shower head will convert any faucet to hands-free operation. The foot controls both water frow and temperature. This easy to install assistive device offers temperature memory, scald protection, hand sanitation and saves water and energy. For more detailed information, contact the originator. TITLE: The Hands-Free Faucet Controller. WEB SITE: Worksh

Hands-On Buddy Button

The Hands-On Buddy Button is a touch switch designed to provide visual cues for individuals who have difficulty locating the surface of a single switch to press for activation. These switches can be used to operate switch-adapted appliances and toys and include a non-slip rubber base. SIZES: Available in regular and large (comparable to the Buddy Button and the Big Buddies, see separate entries). COLOR: Bright yellow with a black handprint on the surface.

Hangin Out Bag (Model 160)

The Hangin Out Bag, model 160, is a wheelchair backpack or carrying bag for walker designed for use by individuals with walking or mobility disabilities. Available in cordura nylon or heavy denim, this bag is equipped with wide patterned or solid polyester webbing with black plastic side release buckle belt for hanging from U-shaped handles, wide armrests, walkers, or chairs that have no push handles. A top bag flap is also featured for monogramming. Other features include a single inner compart

Happy Cow (Model 3063)

The Happy Cow, model 3063, is a switch- or touch-operated toy designed for use by children with upper extremity, mobility, or severe physical disabilities or spinal cord injury. When the cow's hoof is squeezed or an attached capability switch (not included) is activated, this plush cow bounces up and down. POWER: Uses 4 double-A batteries. DIMENSIONS: 12 inches high. COLOR: Black and white.

Happy Switch (Model 14)

The Happy Switch, model 14, is a touch switch designed for use by children with upper extremity disabilities. This large-surface switch has a smiling face on the switch surface and requires a light touch for activation.DIMENSIONS (WxH): 4.5 x 1 inches. COLOR: Yellow with black details

Hardrock

The Hardrock is a durable chair that has been specifically designed for children who are prone to rock repetitively. Hardrock also provides moderate levels of postural support for the user. It incorporates an anti-thrust system and anterior pad to provide secure postural management. Thoracic supports and stabilizers are available for children who exhibit a sideways rocking motion. Hardrock comes complete with adjustable armrests, anti-thrust seat cushion, tray, skis (for size 2 and 3), mobil

Harlow Avery Jeans

Harlow Avery Jeans are women's jeans designed for use by women who use wheelchairs and those having difficulty in dressing. These jeans are designed to be non-constricting and comfortable for the wearer. They are made of lightweight denim stretch fabric and include two front zippers for easy accessibility, wide legs for those who wear casts or braces, and extra two-inch fabric in front and rear. The jeans are button- and Velcro-free. SIZES: Extra small, small, medium, large, extra large, and ext

Harry Hiccers (Model 8064)

Harry Hiccers, model 8064, is a switch operated toy designed for use by children with fine motor, upper extremity or severe physical disabilities or spinal cord injury. This plush toy is a koala that hiccups. Once the user activates the capability switch (not included) or squeezes Koala’s tail seven hiccups sounds can be heard along with the phrases “pardon me,” “excuse me,” and “sorry mate.” This toy is intended to encourage listening skills and language development and comes with a story book,

Have-A-Tray Carrier (Models 70612-3200/3400/6100)

The Have-A-Tray Carriers are caddys for wheelchairs, walkers, and crutches. The two-compartment carriers allow ready access to personal itms. The caddies are made of molded polypropylene copolymer with a drain hole in each compartment. Hardware is supplied with each model for proper attachment. DIMENSIONS: Inside dimensions are 11.25 x 2 7/8 x 7.75 inches. WEIGHT: Wheelchair carrier (70612-6100) is 2 pounds, walker caddy (70612-3200) is 1.3 pounds, and the crutch caddy (70612-3400) is 1.3 pounds

Hayley’s Joy On-The-Go 3 Swing System With Small Platform Board (32” X 24”) Attachment

Haley’s Joy On-the-Go 3 Swing System with Small Platform Board (32" x 24") Attachment is a portable swing designed for children and adults with physical and neurological disabilities. This portable swing can be set up in a few minutes without tools. The swing is secured through snap-button assembly. Haley’s Joy comes complete with swing frame, dual hanging points for linear swinging, mat, and duffel bag. The mat is lightweight and made of a high-strength fabric with floor grippers underneath

Head Control Switch

The Head Control Switch is a head position switch designed for use by children and adults with disabilities. The switch is activated by being tilted and can be mounted on the head or another body part.

Head Pointer

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to perform a variety of tasks. The headpiece for this pointer is adapted from a safety helmet liner and is adjustable to fit a variety of head sizes. The device features additional padding at the forehead for comfort and an adjustable chin strap. The aluminum pointer can be fitted with an end clamp to hold a variety of attachments for different tasks. DIMENSIONS: The pointer is 360 millimeters long. TITLE: Tried and Test

Head Pointer (Models 32370 & 32371)

The Head Pointer is a headwand designed for use by people with physical disabilities. Two fully-adjustable models are available which consist of a head harness, chin strap, and pointer designed to hold its position once it is adjusted. SIZE: Model 32370 is an adult size and Model 32371 fits children. WARRANTY: The manufacturer warrants these products against defects in workmanship and materials for 90 days from the date of purchase.

Head Pointer.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Custom made head pointer for children. Detailed instructions are provided for fabricating an adjustable head pointer using thermoplastics. It requires approximately an hour of time plus materials. Includes photographs. SKILLS REQUIRED: Assembly. Plastics. AUTHOR:Jewell, Kaaren. TITLE: A Custom-Made Head Pointer for Children. REF: Journal article: The American Journal of Occupational Therapy, July 1989, Vol 43, No 7, pp 456-460. 1989.

Head Pointers (Models Ad-1, Ad-2, & Ad-3)

The Head Pointers use the chin rather than the forehead as a point of reference for the pointer. They have a soft tip for use with tablet computers, smart phones or other touchscreen devices. The Standard Pointer (model AD-1) may be individually fitted to head sizes ranging from 20 to 25 inches in circumference. The "Tiny Tot" (AD-2) can fit head circumferences from 17 to 20 inches. Model AD-3 has a hook-and-loop closure. DIMENSIONS: 10 inches long. WEIGHT: 8 ounces.

Head Stabilizer

The Head Stabilizer is a headrest designed for use with the tall models of the IncrediBack Rigid and Moldable Reclining Back Systems (see separate entries). Available in a moldable and a rigid model, the height-adjustable Head Stabilizer provides head and neck support and have lateral head support. The moldable version enables the lateral supports to be molded to conform to the head and neck. A moldable insert provides support for those with neck tone. The rigid support offers the same design, b

Head Stick

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with severe physical disabilities to operate a computer, dial a phone, turn pages, and perform other tasks. This device was constructed using a cut down bicycle helmet. An additional band of rubber was installed to provide comfort and achieve proper fit. The pointer is a firm quarter-inch rubber-tipped metal rod rigidly attached to the side of the helmet and angled so the pointer tip is central to the user's eyesight. The rod is necessar

Head Switch Kit

The Head Switch Kit provides all the materials for making a tilt-activated switch. The switch can be mounted on the head or other body parts, and is activated when tilted.

Headband Switch

Headband Switch consists of an adjustable headband equipped with a switch that has a small paddle for a lever. The paddle rests on the forehead; raising the forehead muscles activates the switch. The paddle must be taped to the forehead. The switch has a 3.5 mm plug. WEIGHT: 2 ounces.

Headmaster Collar

The Headmaster Collar is a cervical collar designed for use by individuals with multiple sclerosis, arthritis, ALS/Lou Gehrig's Disease, motorneuron disease, or other disabilities requiring head support. This collar provides all around support and is covered in a soft, washable fabric. This collar has an open design that provides access to a tracheal tube is easily formed by hand to fit snugly under the chin while providing firm support. OPTIONS: Extension pads and replacement parts. SIZES: In

Headmouse Extreme

HeadMouse Extreme is an mouse emulator designed to provide full mouse control of computers for people without use of their hands, but who have good head control. It operates from the top of a computer monitor, laptop computer, or augmentative communication device, and measures the user's head movements. The HeadMouse tracks a small disposable target that is placed on the user's forehead or glasses. This device provides a wide field-of-view, supports graphics-intensive applications like drawing a

Headrest Hardware (100 Series)

The Headrest Hardware, series 100, is seating hardware designed for use on wheelchairs. Each hardware kit includes link hardware and offers a wide range of adjustment. This hardware offers five points of adjustability. COLOR: All hardware is black chromed and anodized.

Headrest Pads

The Headrest Pads are headrest accessories designed for use on wheelchairs. These pads are composed of a steel insert with self-skinning polyurethane. These pads are designed to attach to a one-inch ball. SIZES: Small, medium, oe large.

Headrest Swing Away Bracket (Sm-Hrsa240)

The Headrest Swing Away Bracket, model SM-HRSA240, is switch mounting hardware designed for use by individuals who use wheelchair headrests. This arm attaches to any Stealth or Otto Bock style headrest (see entries). It is made ready to mount an egg switch or a sensor in a spot pad. Once adjusted in place the user can swing it away when it is not needed and push it back to the same spot when needed.

Headrest, Large & Small (Models 1450, 1451-01, -21, -31, -32, -33, 1460, 1461-01, -21, -31, -32, -33)

The Headrests are designed for use with wheelchairs. Made of 16- gauge steel, they are plated to resist corrosion and have a recess in the center for two rows of ##10-32 press nuts. Both ends are contoured. The headrests are deburred for a smooth surface. OPTIONS: Available in metal only or with padding of 1 inch open cell foam, 3/8 inch closed-cell foam, and a cover. Covers are available in Terry, Lycra, and Heavy Weight Nylon. COLORS: Black, blue and red.

Headsup Flexible Head Support System

HeadsUp is a head support designed for use by children and adults with neurological or severe physical disabilities or spinal cord injury. This support consists of a hat and flexible elastic bands that fasten around a wheelchair headrest or high seat or chair back to hold the head up. Each side adjusts independently from the other, creating the ability to apply the desired amount of tension. As the elastic stretches, it allows a full range of motion;as the elastic stretches, the resistance incre

Headswitch (Model 705)

The Head Switch is a touch switch that can activated with various body parts for individuals with physical disabilities. The switch requires very little pressure and so can be used by the head, knee, elbow, cheek, etc. Contact manufacturer for information on switch mounting kits (not included). DIMENSIONS: The length is 3.75 inches.

Headswitch Kit 1 (Model 1560)

The Headswitch Kit 1, model 1560, is a touch switch and switch mounting hardware package. HEADSWITCH: (Model 705) this switch (with cord) is activated with very light pressure from the head, but can also be activated by a knee, elbow, cheek, or other body part when mounted on a table or wheelchair. MOUNTING HARDWARE: The mounting hardware in the kit includes all necessary components: 1 universal swivel clamp, one 3/4 - 1/4 inch adapter, one 8-inch rod, one 18-inch rod, and one wheelchair clamp.

Headswitch Kit 2 (Model 1570)

The Headswitch Kit 2, model 1570, is a switch mounting hardware and touch switch package that includes all necessary components for the attachment of the switch to a table or flat surface. HEADSWITCH: Headswitch model 705 is a touch switch that can also be activated by very light pressure from the knee, elbow, cheek, or other body part. MOUNTING HARDWARE: 1 universal swivel clamp, one 3/4 - 1/4 inch adapter, one 8-inch rod, one 18-inch rod, and one surface mount clamp.

Headswitch Kit 3 (Model 1580)

The Headswitch Kit 3, model 1580, is a touch switch and switch mounting hardware package. HEADSWITCH: Headswitch (model 705) is a touch switch that can be activated with very light pressure from the head, knee, elbow, cheek, or other body part. 2 headswitches and cords are included in this kit. MOUNTING HARDWARE: Two 3/4 - 1/4 inch adapters, 1 flex mount, 8 assorted rods (4 pairs), 2 quick disconnects, 2 surface mount clamps, 2 wheelchair clamps, 4 universal swivel clamps, and 1 sturdy case with

Headway

Headway is a cursor control interface designed for use by individuals with upper extremity and severe physical disabilities. This wireless infrared pointing device provides computer access via a small head worn transmitter. Left, right, up, and down head movements emulate on screen mouse movements. Used with an on screen keyboard (not included), this device enables total head control of the computer. The device's sensitivity is adjustable and with the press of a single mode button, the device op

Heartful Bird (Model 178)

The Heartful Bird, model 178, is a switch-operated toy designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. This toy connects to an external switch, such as a capability switch, through a .125-inch jack. Once the switch is activated, this toy bird, resembling a parrot perched on a tree, chirps musical tunes. The toy is intended to be useful in improving listening skills and visual attention. POWER: Uses 3 AA batteries (not included). DIMENSI

Heatguard Tmv3 Shower Valve (Model Dc153)

The Heatguard TMV3 Shower Valve, model DC153, is a a water temperature control valve designed to prevent scalding of individuals with cognitive or severe physical disabilities or Alzheimers disease. This shower valve contains a single-piece thermostatic cartridge with a temperature sensitive element that expands and contracts depending on the temperature of the water flowing past it. This changes the size of the openings through which the hot and cold water enter the shower, and balances the tem

Heavy Duty Grip Switch (Model 6203)

The Heavy Duty Grip Switch, model 6203, is a squeeze switch designed for individuals with physical disabilities. The Astarex-B switch features low voltage and single hand control for use as a call switch or hospital switch. Grasping the cylinder with less than three pounds of nominal actuation force activates the switching unit. DIMENSIONS (LxW): The grip measures 1 x 5 inches. WEIGHT: The switch weighs four ounces. COLOR: Black.

Heavy Duty Lap Pack

The Heavy Duty Lap Pack is a caddy for wheelchair or scooter designed for use by individuals who use wheelchairs. This pack is worn over the lap of an individual using a wheelchair or scooter to carry and organize the gear necessary for a variety of activities. It has more than 20 pockets of different sizes, enabling the user to carry tools and supplies for woodworking, gardening, sightseeing, photography, camping, hiking, and other activities. The Lap Pack is made from 10-ounce cotton duck with

Hercules Heavy Duty Footswitch

Footswitch. 8 7/16 by 4 5/16 by 4 1/2 inch cast iron, heavy duty foot operated 1, 2, or 3 stage momentary or latching switch. Some models have 2 or 3 stage switches built in. 3/4 inch 14 pipe thread conduit opening. Optional: oversized shields. Driptight, dustight, watertight, oiltight. Cast iron. Models available with anti trip treadle mechanism to prevent accidental actuation through unintentionally stepping on foot treadle. POWER: Comes in 20 amps, 125-250 volt AC, one horsepower; 15 amps, 12

Hercules Potentiometer Foot Control

Footswitch. 9 by 5 3/4 by 4 3/4 inches, foot operated momentary switch controls variable speed motor with 2 watt linear model and choice of maximum resistance. Spring loaded treadle returns to up position when foot pressure is removed. Oiltight, watertight models come with or without shield guard which fits over treadle. WEIGHT: 7.5 pounds.

High Back Mobile Chair (Models R6321, R632, & R633)

The High Back Mobile Chair is a positioning chair designed for use by individuals with severe physical or neurological disabilities who require upper body support. The chair includes the mobile chair frame, a high backrest with push handle, pads, armrests, and footboard and sandals. The seat is available with a choice of seat tilt or seat spring action. The seat and backrest are contoured and padded, and a hip strap clips into the chair in a variety of positions to meet user needs. The armrests

High Level Kayak Seat

The High Level Kayak Seat is a seat for kayak designed for use by individuals with severe physical or mobility disabilities or spinal cord injury who use a wheelchair and have limited mobility and upper body strength. Protruding lateral supports assist in keeping the user upright and secure. This seat replaces the existing kayak seat or may stand alone between seats in a canoe or boat. The seat frame is constructed of lightweight aluminum and covered in a durable waterproof material which can be

High Neck With Cap Sleeves (Model 003)

High Neck with Cap Sleeves, model 003, is a women’s top designed for use by individuals with mobility and severe physical disabilities or spinal cord injury. Features include a high mock neck, cap sleeves, and an A-line cut. The high back is designed to accommodate high level spinal cord injury as the back separates into right and left facilitating the putting on and removal of the garment by an aid throughout the day. The A-line cut offers ease in fitting along with the cap sleeves, which are d

High Quad Pistol Mount (Model HQPM)

The High Quad Pistol Mount, model HQPM, is a pistol support designed for use by people with severe physical or upper extremity disabilities or spinal cord injury who use a powered wheelchair. It is intended for use by individuals with no hand or arm use, and it is designed to work with a High Quad Gun Mount, model HQ100 (not included; see separate entry). Model HQPM has a trigger activator that connects to model HQ100’s trigger activation mechanism.

High Roller (Model 757)

The High Roller, model 757, is a dice throwing aid designed for use by individuals with fine motor, grasping, or upper extremity disabilities. Open the Velcro-closure top and place up to five dice in the device. Push the outer rim or activate a connected capability switch (not included)to shakethe dice. The dice shake, rattle, and roll. The unit comes with two sets of dice. POWER: Uses 2 double-A batteries. DIMENSIONS (LxWxH): 6 x 6 x 3.75 inches. COLOR: One dice set is white and one set is blac

High Striker (Model 2242)

The High Striker, model 2242, is a touch activated toy designed for use by children with severe physical or upper extremity disabilities. When the gooshy pad is struck, various sound effects play at different levels while lights track upward, indicating the amount of force applied. When struck full force the user is rewarded with a rainbow of lights, vibration, music, spinning glitter and sound effects. Activation pressure levels are adjustable. POWER: Uses 6 double-A batteries. DIMENSIONS (LxDx

High-Low Chair

The High-Low Chair is a positioning chair designed for use by children up to 45 inches tall with mobility or neurological disabilities. A pneumatic cylinder allows the chair height to be adjusted with a single lever or the seat and frome can be detached from the wheeled star-shaped pedestal base for use as a floor sitter. The colorful support seat is padded and covered in wipe-clean polymer-coated fabric. To hold the child comfortably in mid-line, the chair is equipped with a quilted cotton-line

Hill-Rom Np50 Prevention Surface

The Hill-Rom NP50 Prevention Surface is a foam mattress surface and decubitis pad designed for use individuals in acute care or with severe physical disabilities or spinal cord injury. This lightweight, durable surface is constructed of high-density medical-grade foam with fluid proof nylon ticking and a vinyl base. The surface redistributes pressure to help prevent decubitis ulcers. It articulates with a frame and is reversible from head to foot. OPTIONS: Bolster/raised firm perimeter. CAPACITY

Hilltops

Hilltops is a motor skills training toy for children, preschool age to third grade age, or anyone with physical developmental disabilities who needs to further develop their gross motor skills. The individual may step or jump from “hilltop” to “hilltop”. Hilltops develop the person's ability to estimate distances and makes them more familiar with heights, therefore this is also an activity to improve perceptual motor skills. Each Hilltop is has with rubber “feet" which prevent the hilltops from

Hip Belt (Models 31446, 31447, 31448, 31451, 31452, & 31453)

The Hip Belt is a pelvic restraint designed to aid in the proper positioning of the hips for people who use wheelchairs. The cushioned nylon straps connect with hook-and-loop material and attach to the wheelchair with grommets. Models 31446, 31447, and 31448 have single D-ring adjustment loops. Models 31451, 31452, and 31453 have double D-ring adjustment loops. SIZES: Both styles come in small, medium, and large.

Hip Kit Iii (Model 665-321)

The Hip Kit III, model 665-321, is a long-handled sponge, long-handled shoe horn, dressing stick, sock aid, and a reacher designed for use by individuals with reduced reaching capabilities, including individuals with upper extremity, hip replacement, mobility disabilities. The set includes a standard Handi-Reacher; a round, long-handled sponge; a dressing stick; a Sock Notch; and a long-handled shoe horn. DIMENSIONS: The Handi-Reacher is 24 inches long. The dressing stick is 26 inches long, and

Hip Pocket

Wheelchair side pouch attaches to armrest with velcro straps. Cordura nylon. Hip pocket measures 10 1/2 inches long, 6 inches wide and 2 inches deep. Inside compartment with zipper closure. Colors: black, red, navy, royal blue, tan, brown, and light or dark gray.

Hitch Computer Switch Interface

The Hitch Computer Switch interface is a switch adapter for computers designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This plug-and-play switch requires no software setup, making it immediately ready to deliver five sets of functions to as many as five switches at a time. Rows of functions are chosen with a single push of a button. This device can be used with switch-accessible software for single switch access or two-switch scanning. T

Hockey Wheelchair

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with quadriplegia to play hockey in a wheelchair league. The lower half of a straight-bladed hockey stick was fastened to a bracket which,in turn, was held across the wheelchair footplates by two quarter-inch bolts and wing nuts for quick assembly and disassembly. Approximately two-thirds of the way back on the blade, arms were fastened that extend approximately four inches at a little less than a right angle to hold the ball. TITLE: Ho

Hold-And-Read (Model 73230)

The Hold-and-Read, model 73230, is a bookholder with clips to support a paperback book for reading and flipping pages with one hand or with a mouthstick. Folding plastic clips hold the left and right sides of the paperback. The holder is made of transparent polycarbonate plastic and has a brass center rivet. The holder will accommodate any thickness book. DIMENSIONS: .75 x 5.25 inches closed; 9 inches open. WEIGHT: .04 ounces.

Hold-It Down Trainer (Model 7400)

The Hold-It Down Trainer is a control switch training program and direct selection communicator designed for use by individuals with upper extremity or severe physical disabilities and communication disabilities. This trainer switch encourages the user to sustain his/her hand on the textured switch plate using three different methods: recorded verbal direction cues, gentle vibration, and activation of any connected toy. The unit offers 300 seconds of recording time for up to 60 messages of five

Home Automation Modules

The Home Automation Modules are environmental control switch modules or lamp modules designed for individuals with speech or communication disabilities and severe neurological or physical disabilities. Intended for use with ComLink communicators (see separate entries) with integrated environmental control software. These modules communicate with the ComLink to control items in the user's home. For example, appliance modules can be used to turn on or off fans or other appliances. Lamp modules con

Home Care Bariatic Bed (Models 3639 & 3648)

The Home Care Bariatric Bed, models 3638 and 3648, is a reinforced, motorized bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features a split-frame construction with powered height adjustment, fowler backrest and leg lift. Drop-down removable side rails, a footboard, a headboard and a remote control are standard. OPTIONS: Bariatric mattress; emergency battery backup. DIMENSIONS: The length is 84 inches. The width can be adjusted

Home Style Bed Rails

The Home Style Bed Rails are side rails designed for use on the the beds of individuals with severe physical or cognitive disabilities. The rails are designed for use on standard home beds and can be raised and lowered with a push button. DIMENSIONS (HxL): 19.5 x 58.5 inches. The height above the boxsprings adjusts to 15.5 and 19.5 inches. The width adjusts from 26 to 72 inches. WEIGHT: 15 pounds.

Homecare Advantage Bed

The Homecare Advantage Bed is a motorized bed designed for use by obese individuals and people with severe physical or mobility disabilities or spinal cord injury. This fully electric bed has eight functions, including raising and lowering the head section; raising and lowering the entire bed; raising and lowering the foot section; and raising or lowering the sections into a Comfort Chair position. FRAME: The heavy-duty steel frame splits in half for transport and includes oak head- and footboar

Honey Bears Slide Toy (Model 334)

The Honey Bears Slide Toy, model 334, is a switch-activated toy and visual perception training activity designed for use by children with severe physical, mobility, or upper extremity disabilities. In this toy, the Honey Bears climb, swing, tip, and tumble on the slide. The toy can be activated with a capability switch (not included). POWER: Uses 1 D-battery. DIMENSIONS (HxLxW): 12.5 x 12 x 8 inches. COLORS: Multi-colored.

Hook & Ladder Fire Engine (Model 131)

The Hook and Ladder Fire Engine, model 191, is a switch operated toy designed for use by children with severe physical or upper extremity disabilities. A connected capability switch (not included) activates the bump n' go action, flashing lights, and siren while the firefighter moves up and down the ladder. POWER: Uses 3 double-A batteries. DIMENSIONS (HxLxW): 10.5 x 8.75 x 3.75 inches.

Horseshoe Therapy Table

The Horseshoe Table is a wheelchair-accessible manual height adjustable therapy table designed for clinic use. The Horseshoe-shaped table accommodates up to four users in wheelchairs and is equipped with seven height-adjustable metal legs and a plastic-laminated top with a cutout. DIMENSIONS: The cutout is 30 x 36 inches and the height adjusts from 26 to 34 inches.

Hospital Bed Sheets (Model C3051, C3053, C3052, & C3050)

The Hospital Bed Sheets are designed for use by individuals who use hospital-style beds in the home. Models C3051, the contoured fitted sheet, and C3053, the top sheet, are cotton/poly blend, and model C3052 is a contoured fitted knit sheet. Model C3050 is a cotton/poly blend pillow case. The knit sheet allows for air circulation and stretches to accommodate the use of a convoluted bed pad. DIMENSION: Model C3051 is 36 x 80 x 6 inches, model 3052 is 61 x 111 x 6 inches, model C3053 is 66 x 104

Hospital Bedding Sets (Model C3054, C3055, & C3056)

The Hospital Bedding Sets are sheet sets designed for use by individuals who use hospital-style beds in the home. All models are packaged in a zippered blanket bag. Model C3054 is a Pillow Protector Bed Set and includes one flat and one fitted cotton/poly hospital bed sheet and one vinyl pillow protector. Model 3055 is a Standard Hospital Bed Set and includes one flat and one fitted cotton/poly hospital bed sheet and one pillow case. Model 3056 is a Deluxe Hospital Bed Set and includes one flat

Houselinc 2

HouseLinc 2 is an environmental control software program designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. Available in USB and serial port versions, this software enables the user to manage a home network of automated lighting and appliances through a personal computer. The system includes a software CD and a HouseLinc 2-enabled USB or serial port modem with cable, and can be used to create scenes and timed events for lights and appliances cont

Hubscrub (Model 20 / 30)

The HUBSCRUB, model 20/30 is wheelchair cleaning system designed to clean, sanitize, and disinfect wheelchairs and other durable medical equipment. The system is housed in an aluminum cabinet with a door on the front. Within the cabinet are recessed, moving nozzles that spray hot (110 degrees Fahrenheit) water provided by a 1 horsepower wash pump. Water drains into a stainless steel internal sink from which water is pumped out by a .33 horsepower drain pump through a raised drain line two to thr

Hubscrub (Model 20 / 50)

The HUBSCRUB, model 20/50, is wheelchair cleaning system designed to clean, sanitize, and disinfect wheelchairs and other durable medical equipment. The system is housed in an aluminum cabinet with a door on the front. Within the cabinet are recessed, moving nozzles that spray hot (110 degrees Fahrenheit) water provided by a 1 horsepower wash pump. Water drains into a stainless steel internal sink from which water is pumped out by a .33 horsepower drain pump through a raised drain line two to th

Hug And Kiss Magnetic Bracelet

This Hug and Kiss Magnetic Bracelet is designed for those individuals who have a disability that affects their fine motor abilities, those with Arthritis, another condition that causes cramping in the hands or for the elderly who have lost most of their dexterity.

Human Beans

Human Beans are body positioners designed for use by children, teens, and adults with physical or neurological disabilities. These large, cylindrical pillows aid in positioning for side lying, prone or supine, or sitting. Available in a Sleeping Bean (adult), Teen Bean, or Kidney Bean (infant or children), all models are hypo-allergenic, filled with polyester, and covered in Staph-Check antibacterial waterproof vinyl. OPTIONS: Cotton pillow case/cover. DIMENSIONS: The Sleeping Bean is 5.5 feet l

Hush Dog (Model 7027)

Hush Dog, model 7027, is a switch operated toy designed for use by individuals with fine motor, upper extremity or severe physical disabilities or spinal cord injury. Once the capability switch (not included) is activated or this toy puppy’s foot is pressed, it will rock its head back and forth and sing “Hush Little Baby.” This plush toy in intended to provide auditory input and increase visual attention. POWER: Uses 3 AA batteries. DIMENSIONS (HxDxW): 11 x 7 x 7 inches. COLOR: Light blue. WEIGH

Hydrovescent Therapy Bath

The Hydrovescent Therapy Bath, by Premier Care in Bathing®, is designed to relieve aches and pains associated with arthritis, high blood pressure or hypertension, migraines, muscle cramps, Rheumatism, sprains, tension, stress, Diabetes, Lumbago, Multiple Sclerosis, poor blood circulation, and Sciatica stiffness. Hydrovescent Therapy is available on every Walk-In Bath by Premier Care in Bathing®.

Hygie Bedpan/commode Cover

The Hygie Bedpan/Commode Cover is bedpan and commode pad designed for use by caregivers of individuals with severe physical or mobility disabilities or spinal cord injury. This hygienic cover for a bedpan and commode chair protects a standard bedpan or the seat of a commode chair. The absorbent GelMax pad turns organic liquids and matter into gel and makes the collection, transportation, and disposal of the contents of the bedpan and commode chair safer while helping to limit the spread of patho

Hygiene Refresher

The Hygiene Refresher is designed for individuals with limited upper body mobility or for persons who cannot twist at the waist. This product may also be used by individuals who find toilet tissue to be too rough on their skin, or for persons who cannot completely clean themselves after using the restroom, or for persons who prefer a bidet-style way of using the restroom. To use, the user fills bottle with water. Then, the user squeezes the bottle and water sprays out of the nozzle. Lightweight.

Hygienic Adjustable Bath Benches (Models 9050 & 9060)

The Hygienic Adjustable Bath Benches are bath seats designed for use by individuals with mobility, balance,and cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a backrest, the benches have a horseshoe design for hygiene purposes. The hard plastic seat and back have multiple drainage holes and the legs are equipped with non-skid rubber tips. DIMENSIONS (HxDxW): Seat adjusts from 14 to 20 inches x 12 inches x 16 inches. CAPACITY: Weight capacity is

I-Mos

---- PROTOTYPE --------- PURPOSE: To design a prototype augmentative and alternative communicate device that is worn like a pair of glasses for individuals with communication and speech disabilities. The i-Mos looks like a pair of glasses. It tracks the users eye movements and translates them into Morse code inputs. The Morse code is then translated into speech. Looking to the left indicates a “dot” and looking to the right, a “dash.” The device includes aids for sentence completion and a built

Ibm Viavoice Speech Recognition Sdk

The IBM ViaVoice Speech Recognition SDK (Software Developers Kit) is a voice output and software authoring program designed for use by software developers to create software accessible to individuals who are blind or have low vision or upper extremity or severe physical disabilities or spinal cord injury. This kit contains documentation, samples, and tools to help the developer to speech enable applications using IBM ViaVoice dictation and/or command & control Runtimes. This large vocabulary

If-400

The IF-400 is an interferential current stimulator designed for use by individuals with severe physical disabilities, arthritis, and chronic pain for the symptomatic relief and management of chronic (long-term) intractable pain and as an adjunctive treatment in the management of post surgical and post traumatic acute pain problems. The IF-400 uses four electrodes and comes standard with a stainless steel belt clip, a carrying case, and an instructional manual. The unit has three auto sweep range

Ifaraday Mouthstick

The iFaraday Mouthstick is a mouthstick for tablet computer and touchscreen designed for use by individuals with upper extremity disabilities, spinal cord injury, or severe physical disabilities. This touchscreen stylus allows the user to operate devices with capacitive touchscreens with his or her mouth. The mouthstick features a biteable mouthpiece with vinyl tubing on the mouth end and a removable tip module strong enough to press keys on a conventional keyboard. The shaft is made of lightwei

Ikan Bowler

The IKAN Bowler is a bowling ramp designed for use by individuals who use wheelchairs. Mmade of aluminum with a baked-on powder coat finish, stainless steel and PVC plastic, the unit attaches to virtually any straight or sports-style foot rests, including center post wheelchairs. This system enables the bowler to control the speed, direction, and timing of the bowling ball's release. Wheelchair movement and the parabolic bowling arm generate the energy to propel the ball down the lane. Braking t

Illuminated Object Communicator (Model 1262)

The Illuminated Object Communicator, model 1262, is a direct selection or scanning communicator designed for use by individuals with low vision and communication disabilities. This device offers 12 levels with 300 seconds of recording time with four selection fields. The user activates a connected capability switch (not included) to start the action. Once objects (not included) are placed within the selected fields illumination is provided for greater visibility. Features include a recordable l

Imperium Mobilelink (Model 200Ml)

Imperium MobileLink, model 200ML, is a radio transmission environmental control unit designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The system communicates through a 2.4 gigahertz radio link, which transmits around corners, through walls, and across significant distances. The system consists of two components, a base unit and a remote unit. The base unit sits atop and plugs into a host environmental control unit, such as the Imperium 200H fro

In-Bed Scale (Model 1Bfl-500)

The In-Bed Scale, model 1BFL-500, is an electronic in-bed scale designed to accommodate people who are unable to get out of bed, including older adults and critical care patients. This transportable scale has a flame-retardant, antibacterial stretcher that is placed under a person. The scale then hydraulically lifts the stretcher with the user inches off the bed. Other features include locking rear casters, an adjustable weighing arm, and a steel frame. The unit also has a "ZERO" key that allows

In-Home Lift System

DO IT YOURSELF ENTRY --- PURPOSE: To provide transfer assistance for an individual with neurological disabilities. A wooden track is mounted it to the ceiling, and in-line skate wheels are used to roll the lift along the track. The carriage is powered with a purchased hoist motor. The harness, composed of a seat from a swing, is attached to the hoist. AUTHOR: Wechsler, K. TITLE: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.org/publications/Quest/q113diy.html. REF: Vol. 11, No. 3,

Inbed Head Wash System (Model F76427-1000)

The Inbed Head Wash System, model F76427-1000, is a shampoo basin designed to be used to provide hair care for persons who must remain in bed. Made of plastic, this hollow, double-walled basin features a comfortable neck rest and an internal collection system for used water. The basin also features a large drain plug that can be opened after shampooing to allow the water to drain into the hollow section between the walls. After the drain plug is tightened, the entire unit can be picked up and ca

Incipio Fixie Universal Tablet Stand

The Incipio FIXIE Universal Tablet Stand is a stand for a tablet computer designed for use by individual with fine motor, grasping, neurological, or severe physical disabilities or spinal cord injury or arthritis. Made of aircraft-grade aluminum, the unit fits most tablet computers. It is composed of two parts, one of which holds the tablet and the second supports the unit. Positioning the two pieces enables the user to choose from multiple viewing angles. Rubber grips on the stand are designed

Incontinent Pants

The Incontinent Pants are a men’s trousers designed for use by individuals with incontinence. Designed for individuals who are non-ambulatory or those who use lifts, these trousers features a full elastic waist, a cut-out seat, and a back snap opening for easy changing. These trousers are available in only one length. SIZES: Small, medium, large, extra large, extra-extra large, and extra-extra-extra large. COLOR: Black, navy, light, and dark.

Incrediback Moldable Reclining Back System

The IncrediBack Moldable Reclining Back System is a reclining wheelchair conversion designed for use by individuals with mobility disabilities. This system transforms a standard wheelchair to a reclining wheelchair and can be molded to accommodate kyphosis, scoliosis, and other spinal curvatures. The supports can be remolded as the user's needs change. The unit attaches easily to most chairs, reclines up to 20 degrees, and folds with the wheelchair. SIZES: Standard and tall. DIMENSIONS (WxH): T

Incrediback Rigid Reclining Back System

The IncrediBack Rigid Reclining Back System is a reclining wheelchair conversion designed for use by individuals with mobility disabilities. This system transforms a standard wheelchair to a reclining wheelchair and is designed for use by individuals without spinal curvatures who require relief from forward or lateral leaning or who rquire additional comfort. The unit attaches easily to most chairs and reclines up to 20 degrees. The tall modesl include a moldable headrest above the rigid shell.

Independence Push Chair

The Independence Push Chair is a stroller and transport chair designed for use by children with lower extremity, mobility, or neurological disabilities or cerebral palsy. This chair maneuvers over all types of terrain and has a multi-position sun canopy with clear window. FRAME (HxLxW): 43.75 x 55 x 27.5 inches when assembled; 18 x 38.125 x 27.5 inches when folded (with wheels). The folding frame can be folded with one hand for transport or storage. SEAT: 12-inch wide padded seat with adjustabl

Independence Saddle

The Independence Saddle is an adaptive saddle designed for use by children and adults with severe physical disabilities in equestrian therapy. This saddle features an adjustable backrest, headrest, forearm supports, and handgrips. It also features a prompt reduction technology that gradually allows more independent sitting on horseback by riders with special needs. As the rider gains strength, and goals are achieved, prompts may be removed. SIZES: Sizes are available for children and adults.

Independent

The Independent is an adjustable vertical stander designed for children from 18 months old to young adult who require moderate levels of support when weight bearing while in supported standing. The Independent supports users at the feet, knees, hips and trunk. The height, width and angle can be adjusted independently for a customized fit. It is designed to promote increased comfort and support by providing soft, padded thoracic and pelvic bands as well as padded knee cups. The Independent comes

Independent Feeder

CUSTOM ADAPTATION PURPOSE: To enable an individual with Guillain Barre Syndrome to eat independently. TITLE: Eating Independently. Made primarily of stainless stee, this unit has a rectangular base frame that fits into an existing tube on the user's wheelchair and supports a standard wooden dinner tray. On the right side of the frame is a vertical post with two 90-degree bends in it that is fixed in position with a trinut, creating a mount for the feeding device and a drink container. The mount

Indigo Home Automation Software

Indigo Home Automation Software is an environmental control unit program designed for use by individuals with severe physical disabilities and spinal cord injury. The program enables the user to remotely control and monitor lights and appliances from a variety of handheld remote controls, including an X10 ôEntertainment Anywhereö remote control or a Bluetooth-enabled mobile phone and Salling Clicker. To communicate to X10 compatible devices, Indigo interfaces with the PowerLinc USB interface or

Industrial Explosion Proof Footswitch

Footswitch. Foot operated one or two stage momentary switch. Non sparking cast aluminum housing. Single or dual pedal models. POWER: 15 amps, 125 volt AC, 3/4 horsepower; 10 amps 250 volt AC, one horsepower. DIMENSIONS: 10.25 x 11 X 4 3/8 inches. WEIGHT: 7.75 pounds.

Infinity Treatment Table (Model 6030 & 8436)

The Infinity Treatment Table, model 6030, is a powered elevating treatment table designed for use in therapy settings. The height-adjustable table features a permanently attached treatment mat of bacteria-resistant reinforced vinyl covering over high-density polyurethane foam, and push-button height adjustment. The lower heights facilitate transfers, while the higher levels accommodate treatment. POWER: Uses standard current and includes a hospital-grade plug. DIMENSIONS: The table has a height

Inflatable Crescent Shaped Shampoo Tray (Model H76430-1250)

The Inflatable Crescent Shaped Shampoo Tray, model H76430-1250, is a shampoo basin designed to be used to provide hair cair for persons who must remain in bed. When inflated, the basin fits into the space usually occupied by the pillow and forms a semi-circular ring with one flat side for neck support. Made of soft, heat-sealed plastic, the basin can be inflated by mouth or with a small pump and features a large drain tube for complete emptying after use. DIMENSIONS: 22 x 17 x 3.75 inflated. Th

Inflatable Rubber Invalid Cushion

The Inflatable Rubber Invalid Cushion is an inflatable ring seat cushion designed for use by individuals with pressure sores. This durable, heavy-gauge cushion conforms to the natural contours of the body. It cleans with a damp cloth and contains natural rubber. DIMENSIONS: 15 inches diameter x 3 inches high when inflated.

Inflatable Rubber Invalid Cushion

The Inflatable Rubber Invalid Cushion is an inflatable ring seat cushion designed for use by wheelchair users and individuals who are at risk for pressure sores or have difficulty sitting for long periods. Designed to conform to the natural contours of the body, this cushion helps relieve pressure on sensitive areas by evenly distributing body weight. It has a push-pull valve for inflation and deflation, and it can be cleaned with a damp cloth. DIMENSIONS (DxH): 13 x 3 inches. COLOR: Red.

Inflatable Vinyl Invalid Cushion

The Inflatable Vinyl Invalid Cushion is an inflatable ring seat cushion designed for use by individuals with pressure sores. This cushion helps provide both support and comfort when sitting for long periods. Inflation and deflation are accomplished with a push-pull valve. DIMENSIONS: 13 inches diameter x 3 inches high when inflated.

Infogrip Switch Adapted Mouse

The Inforgrip Switch Adapted Mouse is a switch adapted mouse designed for use by individuals with fine motor, upper extremity, or severe physical disabilities or spinal cord injury.This unit is a standard mouse equipped with two standard 1/8-inch plugs to accommodate two switches. Its left and right mouse clicks have been adapted for switch activation (switches not included).

Information Labels

Information Lables is a personal skills and independent living skills tutorial program designed for use with individuals with cognitive or developmental disabilities. This program teaches 80 words associated with labels. Categories include food labels (100% natural, fat free, ready to use); medicine information labels (shake well, do not use after); medicine warning labels (may cause drowsiness, do not eat, do not exceed); and clothing labels (drip dry, dry clean, wool). Multimedia software comb

Information Signs And Words

Information Signs and Words is a personal skills and independent living skills tutorial program designed for use with individuals with cognitive or developmental disabilities. This program teaches the 80 most common signs and words found in the community, including admission, ask for assistance, count your change, do not touch, entrance, hospital, no pets, stairway, and wait to be seated. Multimedia software combines live action video and human-quality audio in an adult format. The program also

Infoscan

The InfoScan is a hand-held scanner designed for use by individuals with learning, neurological, or physical disabilities. Completely portable, this pen-style scanner enables the user to scan and transfer printed text directly into a PC or to scan, store and transfer up to 500 pages of printed data to a PC, laptop, PDA or any Windows application via Infrared or serial port. The InfoScan recognizes 6 to 22 point font sizes, including text that is bold, italicized, underlined, or inverted. This

Infra-Link First-Aide Kit

The Infra-Link First Aide Kit is an emergency alert system designed for use by seniors or by individuals with mobility disabilities, severe physical disabilities, or spinal cord injury. This system provides an immediate, independent communication link in case of an emergency. The system includes a universal infrared transmitter, a remote-controlled speaker-telephone, and an alternating current (AC) wall outlet. The transmitter and a sip-or-puff switch are attached to an I-V stand and can be move

Inglis Drink-Aide

The Inglis Drink-Aide is a cup with holder designed for use by individuals who use wheelchairs or who have limited upper body movement. Designed to enable independent hands-free drinking, this unit consists of a 28-ounce insulated water bottle; a long flexible, vibration-resistant drinking tube; and a universal clamp. The clamp enables the unit to be attached to a bed, a wheelchair, etc. OPTIONS: Extra drinking tubes.

Insteon Powerlinc Usb With Mcontrol Software

INSTEON PowerLinc USB With mControl Software is an environmental control module designed for use by individuals with spinal cord injury or severe physical disabilities. It enables the user to control lights, appliances, heating and air conditioning systems, and alarm systems through a personal computer or television. This home automation interface module transmits and receives Insteon or X10 signals between home automation devices and a PC via a Universal Serial Bus (USB) port on the computer. C

Integramouse

The IntegraMouse, also called USB Integra Mouse, is a mouth operated mouse designed for use by individuals with spinal cord injury, severe physical disabilities, or upper extremity disabilities or amputation. This unit has all functions of a standard mouse. To operate, the user places the mouse between the lips and operates the cursor by applying pressure with the lips. As little as 0.1 millimeter of movement or 10 grams of pressure are required to control the mouse. Mouse clicks (left click, ri

Integraswitch

The IntegraSwitch is a pneumatic switch designed for use by individuals with neurological, upper extremity, or severe physical disabilities or spinal cord injury. This control unit can be used to operate environment control systems, communication devices, adapted toys, software programs or emergency call systems. Its mouthpiece is exchangeable and latex-free, and can be cleaned in a dishwasher. The unit has two exits for dual function (one exit for sipping and one exit for puffing). Sipping and

Intelect Hvp-High Volt Portable Stimulator

The Intelect HVP-High Volt Portable Stimulator is a neuromuscular stimulator designed for use in therapeutic, clinical, or home settings for people with muscle spasms, poor circulation, or reduced range of motion. This single-channel unit offers continuous or alternating modes and twin-peak, high-voltage pulsed current. The frequency is adjustable from one to 1000 pulses per second and the voltage output is zero to 330 volts. POWER: Uses two nine-volt batteries or an alternating current (AC) lin

Intelect Hvp2 High Volt Portable Digital Stimulator

The Intelect HVP2 High Volt Portable Digital Stimulator is a neuromuscular stimulator designed for use in therapeutic, clinical, or home settings for people with muscle spasms, poor circulation, or reduced range of motion. This single-channel monophasic unit offers dual intensity dial controls and pulsed high volt current. The frequency is adjustable from one to 1000 pulses per second and the voltage output is zero to 330 volts. POWER: Uses two nine-volt batteries or an alternating current (AC)

Intellikeys

IntelliKeys is a modified and expanded keyboard for children and adults with visual, physical or cognitive disabilities. The standard system includes one cable and six plastic user overlays, (arrows, numbers, alphabet, basic writing, QWERTY, and one setup overlay used to adjust IntelliKeys for specials needs such as keyboard response and repeat rate). The overlays enable users to access standard learning software and are easy to see, touch and understand. They can be used at home or work and rot

Intellitools Classroom Suite

The IntelliTools Classroom Suite is an academic reading, writing and math tutorial program and an assessment and evaluation system for children with cognitive or learning disabilities from pre-kindergarten (Pre-K) through the fifth grade. This software was developed based upon the principles of Universal Design for Learning (UDL) that combines two educational paradigms—systematic, explicit instruction and flexible creativity tools. It is designed to allow teachers to have control over specific l

Intention Switch (Model 710, 710-8)

Intention Switch is a single switch activated by pressing on a plastic plate for individuals with uncontrolled movements. The Intention Switch must be pressed for a specific pre-set amount of time before it will activate a device. The required activation time is adjustable (0-12 seconds). It comes with the standard 0.25 inch jack and plug and can be ordered with a 1/8 inch jack and plug. POWER: 9-volt battery. DIMENSIONS: 5 x 8 inches.

Interactive Drum (Model 4540)

The Interactive Drum, model 4540, is a switch operated toy designed for use by children with fine motor, severe physical or upper extremity disabilities. This toy drum has been adapted with four single switches mounted just in front of the drum. One switch plays more than six tunes; the other three switches allow the user to play the bass, cymbal and snare drums along with the tunes. This toy is intended to aid in the development fine motor skills, cognitive learning and sensory awareness. POWER

Interface Hardware

The Interface Hardware is headrest accessory hardware for the Occipital "T" Bar designed for positioning an occipital bar on a wheelchair. The Interface attaches to the rear of the occipital bar. DIMENSIONS: The swivel tubes are available in 4-, 6-, or 10-inch lengths. The "T" tubes are available in 4- or 6 inch lengths. COLOR: Available in black and stainless steel.

Interlock Knit Pants With Opening Options (Model C120)

The Interlock Knit Pants with Opening Options, model C120, are children's pants designed for use by children with severe physical disabilities who need assistance for dressing, undressing, and/or toileting. These pants have a wider cut and higher rise in the back, reinforced wrist loops for lifting and dressing, and patch pockets positioned high on the front. They are available with either outside seam openings, which allow the pants to lie flat on a bed or lie open on a chair for dressing, or

Intro To Cause And Effect (Model 115)

Intro to Cause & Effect, model 115, is a cause and effect training program designed for use by individuals with cognitive disabilities. It introduces the user to the computer and the switch. It is also designed to improve tracking ability of objects and increase the user's attention span. Each time the user presses the switch or keyboard, one of 35 animation segments with large, brightly colored geometric shapes appear on the screen accompanied by sounds. Animation segments last for approxim

Invacare Contouru

The Invacare ContourU is a molded seating system kit designed for use in wheelchairs. These seat and back cushions are made by utilizing a simulator and molding bags to capture the shape of the individual. This system provides optimum positioning while accommodating complex orthopedic deformities and tone. Support surfaces are built into the cushion and multiple finshing options, including naked foam with removable cocver, vacuformed vinyl, pelvic strap notches, and undercuts are available.

Invisible Connection, The

The Invisible Connection is an infrared remote control switch designed to allow wireless connection between switches and a variety of devices such as a computer, environmental control unit, or battery operated radio. The connector will accommodate two switches and two devices, or may be used with a switch interface, Adaptive Firmware Card, or Ke:nx (see separate entries) to send signals to a computer. The controller consists of a receiver into which multiple devices may be plugged, and a transmi

Invisible Food Guard (Models 1114 & 1115)

The Invisible Food Guard, models 1114 and 1115, is a plastic food guard designed for use by individuals with upper extremity and eating disabilities. This crystal clear plastic ring features a slot cut around base to slip onto plate. Model 1114 is designed to fit 6 to 7.5 inch plates. Model 1115 is designed to fit 8.5 to 10 inch plates. DIMENSIONS: The guard is 1.25 inches high.

Ipad Cordless Super-Switch

The iPad Cordless Super-Switch is a touch switch designed to enable individuals with severe physical, motor control, or upper extremity disabilities, neurological or spinal cord injury to control an Apple iPad. The circular switch connects to the iPad wirelessly using Bluetooth 2.1 and has a range of over 50 feet. It can be activated by pressing anywhere on the large top surface. COMPATIBILITY: For use with the Apple iPad. DIMENSIONS: The diameter of the switch is 5 inches. POWER: Rechargable li

Ipad Cordless Switch Interface

The iPad Cordless Switch Interface is a computer switch control interface designed to enable individuals with severe physical, motor control, neurological or upper extremity disabilities or spinal cord injury to control an Apple iPad with a switch. This unit has two switch input jacks. When a switch is plugged into one of the unit's jacks, the switch input becomes a tap or touch for any iPad application (app) programmed for switch access. The switch interface connects to the iPad wirelessly usin

Ipad Mount

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized iPad mount for an electric wheelchair for individuals with mobility disabilities and spinal cord injuries, including people with quadriplegia. A quadriplegic used a computer to organize his activities such as painting, filmmaking, counseling, and motivational speaking. Laptops do not easily mount onto the electric wheelchair, and when the iPad became available, this individual jumped at the chance. Working with TADNSW an iPad b

Ipod Based Soundpod

The iPod Based SoundPOD is a handheld direct selection communicator designed for use by individuals with speech or communication disabilities and severe physical or neurological disabilities. Available as a complete system or as a conversion kit for an existing iPod Touch (not included with the conversion kit), this device comes with TouchChat AAC software (not included with the conversion kit) and a SoundPOD wearable augmentative and alternative communication (AAC) device. Users can remove the

Ipraiseu

iPraiseU™ is designed for use by instructors and parents who often struggle to think of praise statements beyond, "Good Job!" or "Well done!" The iPraiseU™ app is a quick and easy way to praise your learners with multiple phrases, by multiple voices! Simply open the app and tap or shake your device to generate one of 100 praise statements. All are general statements appropriate for any positive behavior. Compatibility: Requires iOS 4.3 or later. Compatible with iPhone, iPad, and iPod touch. This

Irobot Roomba 500 Series Vacuum Cleaning Robot

The iRobot Roomba 500 Series Vacuum Cleaning Robot is a vacuum cleaner designed for use by individuals with physical disabilities. This vacuum cleaner is designed to perform vacuuming without the need of human physical activity through its robotic mechanisms. The robotic vacuum features include room navigation, edge and corner cleaning, advanced anti-tangling and transitioning from carpet to hard floors. The modular system features an automatic recharger and light touch bumper. The system comes

Iscanmp3

The iScanMP3 is a scanning control for an MP3 player designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. Plugging a capability switch (required but not included) into the iScanMP3 adapter and connecting an Apple iPod, iPod Photo, or iPod Mini enables the user to scan through iPod functions: play, pause, forward and back through a play list, and volume up and down. The scanning speed is adjustable. DIMENSIONS(LxWxH): 3 5/8 x 1.75 x 0.5 inche

Itinerant Platform Swing (Model 7260)

The Itinerant Platform Swing, model 7260, is a therapeutic platform swing designed for use by individuals with physical and neurological disabilities. The circular Itinerant Platform Swing is designed to fit the ITN Support Frame (see separate entry), and can be used in a variety of positions, including prone or sitting. The swing includes removable spreader bars to help provide additional room inside the ropes for larger clients. A carrying case is included. DIMENSIONS: 30 inches in diame

Iv Pole

The IV Pole is an IV stand designed for use by individuals with severe physical disabilities. The pole allows individuals on intravenous fluids to remain mobile while connected to the IV. It has four hooks to hang fluids and four wheels to provide maneuverability. The height of the pole is adjustable to allow use while in lying in bed, sitting up, or walking. DIMENSIONS (HxDxW): 47 x 24.5 x 24.5 inches. The height can be adjusted from 47 to 85 inches in unlimited increments. WEIGHT: 9 pounds 12

Jacob's Rib-It-Ball

Jacob's Rib-It-Ball is a large textured ball designed for use by children with low vision or fine motor, grasping, upper extremity, or mobility disabilities. This lightweight ball consists of an air bladder encased in denier nylon with Velcro closures. Nylon-covered closed-cell-foam ribs on the ball's surface aid in grasping and throwing and prevent the ball from rolling out of reach. High-contrast colors aid in visibility. DIMENSIONS: 18, 24, or 30 inches in disameter.

James

JAMES is a portable, switch-activated environmental control unit designed for use by individuals with mobility, severe physical, or neurological disabilities or spinal cord injury. This unit offers direct access or row/column switch scanning to operate lights, appliances, beds, doors, and other X-10 and infrared controlled devices. The unit's liquid crystal display (LCD) allows for visual recognition of the 248 functions, including temporary or permanent programmable macros and telephone access.

Jamesair Support Surfaces

The JamesAir Support Surfaces are alternating air pressure mattress surface designed to prevent and treat pressure sores/ulcers. The units are available with low air loss and/or alternating pressure. Also available is a turning mattress. These surfaces are available in standard and bariatric models. POWER: 120-volt alternating current (AC), 60 hertz (Hz), 22/230 volt AC, 50 Hz. OPTIONS: Fast inflate/deflate pump, carrying case. SIZES: Small, medium, large, extra-large, or extra-extra large. Cust

Janet Top - Jackie O Pink

The Janet Top-Jackie O Pink, is a women’s top designed for use by woman who use wheelchairs or who have difficulty in dressing. This top features a free-form universal smock-like design and goes on over the head without raising the arms. The top is sewn together at the shoulder seam only with ties on the back that the wearer can wrap around and tie in the front. The back is wider than the front with 6.5 inches contrasting fabric which ties in the front for complete coverage. Other features incl

Jb-3 Leg Bag Emptier

The JB-3 Leg Bag Emptier is designed for use by individuals with spinal cord injury, severe physical or neurological disabilities, or who use catheters due to urinary incontinence. This system features a patented valve design for ease of activation to manually drain urinary leg bags. Attachment for use requires no wheelchair modifications, and only two pounds of pull force empties a 750 mililiter (ml) leg bag in less than 20 seconds. This system eliminates body fluid contact, so no sanitizing

Jelly Beamer Twist Switch

The Jelly Beamer Twist Switch is a wireless button or touch switch designed to control a wide range of switch-adapted devices and toys for individuals with upper extremity or severe physical disabilities or spinal cord injury. This switch has two components: the Jelly Beamer switch that houses a transmitter and the Jelly Beamer receiver that can be plugged into any switch-adapted device, from battery operated toys and electric appliances to a digital camera or computer. Each switch is uniquely p

Jelly Bean Switch

The Jelly Bean Switch is a button or touch switch designed to control a wide range of electrically- or battery-operated devices and toys for people with upper extremity disabilities. The switch is contained in a high-impact disk and the entire surface of the switch is sensitive to pressure, requiring less than two ounces of pressure for activation. The Jelly Bean Switch can be mounted on any surface using readily available adhesives or they can be mounted on AbleNet's Slim Armstrong (see separat

Jennswing

The Jennswing is a swing with torso support designed for use by children with mobility disabilities. This lightweight, rotational-molded plastic swing provides total body support, including upper and lower torso and legrest support. The swing includes upper torso and waist safety straps and armrests. It can be attached to any standard outdoor swing set, used indoors with its own stand (included), or suspended from the ceiling (proper hooks required). OPTIONS: JennSwing Frame and replacement 5-po

Jenx Multistander

Jenx Multistander is a pediatric standing system designed for use by children 6 months to 6 years with motor and neurological disabilities to assist with weight bearing and standing activities. The Jenx Multistander offers a variety of configurations for prone, upright or supine standing. The user may be positioned anywhere between upright and horizontal positions. This multifunctional stander can accommodate children smaller than the minimum height by using sandal-raising blocks. The removable

Jenx Prone Stander - Size 1- Orange

Jenx Prone Stander Orange is a dedicated prone stander designed to provide support anteriorly for children with mobility and neurological impairments such as cerebral palsy, spina bifida and Tethered spinal cord syndrome. The individual support pads can be adjusted in relation to each other to ensure a proper fit. Children with longer bodies and shorter legs can be just as comfortable as those with shorter bodies and longer legs. The hip and chest straps are closed in the center and then adjus

Jersey Protector (Model Mf101J)

The Jersey Protector, model MF101J, is a protective smock designed for use by individuals with physical, upper extremity, or eating disabilities. It is made of soft jersey material and features a nylon front and supplex waterproof backing. The protector is also available with a catch all pocket. SIZE: One size fits all. COLOR: Navy, red, purple, black, green, or royal.

Jig For Emptying A Leg Bag

CUSTOM ADAPTATION PURPOSE: To enable an individual with multiple sclerosis to empty a leg bag independently. The user, who lives alone, has limited hand strength and was unable to empty her leg without calling for assistance. Although she was able to lift the bag from its carrier on her wheelchair, the valve at the top of the bag was stiff and difficult to open. Using a plastic cutting board as a base, a mount was created from two plastic blocks with a rectangular hole to hold the bag valve. A

Joan Jacket

The Joan Jacket is a women’s jacket designed for use by women who use wheelchairs or who have difficulty dressing. This lightweight, crop- style jacket features four front buttons, a high collar that can be unbuttoned to fold down, and large button holes. The cropped style eliminates interference with wheelchairs or crutches. SIZES: Small, medium, and large. COLOR: Black, light blue sheen, or pink.

Jodi Wrap Top

The Jodi Wrap Top is a women’s top designed for use by women who use wheelchairs or who have difficulty dressing. This blouse offers the appearance of a wrap top as it is cut and stitched closed in the front. Features include long zipper pulls that are attached to the zipper heads of two zippers on the seam, allowing the top to be pulled down with little arm movement. Zippers on both sides offer ease in putting on and taking off the garment while the stitched front prevents opening. DIMENSIONS:

Jonvac Vacuum Mattress

JonVac Vacuum Mattress is designed for children with mobility disabilities. It is a mattress that offers a variety of positioning options to help keep a child comfortable while resting. The JonVac Vacuum Mattress is designed with a lasting mold, but is easy to remold for the child’s unique need. OPTIONS: JonVac Electronic Pump and JonVac Foot Pump. SIZES: Please speak to us about sizes and suitability of each bed, cot or sleeping system. WARRANTY/GUARANTEE: As stated by the manufacturer.

Jouse2

Jouse2 is a mouse emulator designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. This joystick-operated mouse is controlled by the user's mouth: moving the joystick moves the cursor, with cursor speed being determined by joystick movement speed, and mouse clicks are performed using the built-in sip-and-puff switches. Typing and other keyboard functions can be performed using an on-screen keyboard program (not included). This plug and play USB

Joybar

The JoyBar is a powered wheelchair controller designed to enable powered wheelchairs to be controlled using T-bar scooter-style operation. The ReBar utilizes a Center Drive System that consists of mounting hardware and a socket that can be mounted in three positions: in front of the seat on the center line; on the side beneath either armrest; or in the back of the wheelchair. When mounted on the side, the mast with the controller can be placed there to facilitate transfers or better access to de

Joystick (Model 720)

The Joystick, model 720, is a joystick designed to act as a four way switch for individuals who have physical disabilities. It has a cylindrical handle with a thin base and activates four different devices depending on the direction that the switch is moved (up, down, right or left). It can be used for teaching directionality as well as other spatial relationships. DIMENSIONS (HxLxW): 4.5 x 7 x 6.25 inches.

Joystick Plus

The Joystick Plus is a joystick designed to provide computer cursor control for individuals with upper extremity disabilities. This device features separate buttons for click, double click, horizontal/vertical only, drag, and speed. Five cursor speed settings are accessed simply by touching the speed button. The cursor remains in position when the joystick is released and a red light indicates when the drag button is active. This device also has a fingerplate that isolates each button and the j

Jug Kettle Tipper

The Jug Kettle Tipper is a pouring aid designed for use by individuals with use of only one hand, arthritis, or other upper extremity disabilities. This wire-coated cradle accommodates pitchers, juice bottles, etc. and an elastic strap with hook-and-loop closure secures the container in the device. A built-in stop aids in cup positoning, enabling the user to pour liquids simply by tipping the cradle forward.

Jumbo Bib

Jumbo terry cloth bib, 18 by 32 inches, Velcro adjustable fastening. Machine washable. One size. Available in double sided terry cloth or vinyl backed.

Jumbo Remote Control (Model 1526)

The Jumbo Remote Control, model 1526, is a remote control for television, DVD players, and VCRs, designed for use by individuals with fine motor, severe physical, or upper extremity disabilities or low vision. This all-in-one remote control allows the user to control TV, VCR, DVD, cable, PVR, and satellite receivers by pressing large buttons that are very sensitive to touch and which have different colors for different group functions. It will also control the latest Flat Screen TV's. The unit a

Jumbo Shape Fit Switch (Model 851, 851-8)

The Jumbo Shape Fit Switch, model 851 and 851-8, is a puzzle switch and visual motor task switch designed to demonstrate simple shape discrimination for individuals who have physical, sensory, or cognitive disabilities. The puzzles introduce basic cognitive concepts, improve fine motor skills and develop order and sequencing skills which are important building blocks for logical thinking and organization. They also teach individuals to distinguish colors, shapes, and sizes. When the puzzle piece

Jumbo Switch (Model 787)

The Jumbo Switch, model 787, is a touch switch designed for use by individyals with severe physical or upper extremity disabilities. This switch is equipped with a removable mounting plate and comes with two clear plastic covers, one with a lip and one without. OPTIONS: Replacement covers. DIMENSIONS (Diameter x H): 5 1/8 x 1 inch. COLOR: Red, blue, purple, yellow, or green.

Jump & Learn Elmo

Jump & Learn Elmo is a touch activated educational toy designed for use by children with severe physical, vision, or upper extremity disabilities. By squeezing Elmo's hand, the child can choose from four modes of play: Jumping, singing, counting, and learning the alphabet. When Elmo jumps on his pogo stick, it makes a "boing" sound and Elmo will start play by coming up with a word, a number, or phrase that matches the selected mode of play.

Jumping Jack Frog (Model 669)

The Jumping Jack Frog, model 669, is a touch activated toy designed for use by children with upper extremity or severe physical disabilities. Touching the bumpy plate makes the felt frog’s arms and legs swing while one of seven high- quality songs plays for 15 seconds. The toy also provides sensory experiences as the user feels the textured plate and bead chains vibrate, watches the multi-colored blinking lights dance about, and touches the frog's soft felt. This toy also has a switch input to

Junior Chair

The Junior Chair is a youth positioning chair designed for use by children ages 18 months and up with mobility or neurological disabilities. This chair is designed to adapt to the child’s growth. Features include a height-adjustable seat and footrest, a removable lap bar, safety strap and a wide–footed base for stability. The chair is made of solid beech wood and is latex free. DIMENSIONS (HxLxW): 30 x 21 x 21.5 inches. CAPACITY: 100 pounds. COLOR: Natural wood finish.

Junior Footswitch (Models 121S & 124S)

Footswitch. Foot or knee operated momentary switch ideal for office machines or shop equipment. POWER: 20 amps, 125 to 250 volt AC, 1 horsepower or 15 amps, 125 to 250 volt AC, 1/2 horsepower. DIMENSIONS: 5.5 x 3.25 x 1.25 inches. WEIGHT: 1 pound.

Junior Mealtime Protector (Model Jc3300 )

The Junior Mealtime Protector, model JC3300, is a large protective bib designed for use by children with severe physical and upper extremity, swallowing, or eating disabilities. This waterproof bib has an absorbent front with vinyl backing. SIZE: One size fits all. COLOR: Blue flames, pink camouflage, baseball, and bling kitty prints.

K450 Mx

The K450 MX is a powered wheelchair designed for use by children and small adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. It features a powered seat-to-floor function that moves the seat forward and down from its normal height to ground level in front of the frame and back again. This function is intended to facilitate transfers or interacting with other people. FRAME (LxW): 33 x 24.5 to 28.5 inches. The minimum turn radius is 41.75 inches. The K450 MX

Kaleidoscope 2

Kaleidoscope 2 is a simple drawing and painting program designed for use by young children with cognitive disabilities. Accessible by mouse, keyboard, or touch screen, the program offers several user levels. At the most basic level, a single mouse click adds color to pictures. At more advanced levels, users can stamp pictures, paint pictures, and create symmetrical kaleidoscope-like pictures. COMPATIBILITY: For use on IBM and compatible computers. SYSTEM REQUIREMENTS: Pentium or better processo

Kangapouch (Model 977)

The Kangapouch, model 977, is a wheelchair and walker caddy designed to afford people with mobility disabilities the ability to carry items with them. Made of corduroy, the Kangapouch features oversized, deep pockets and attaches to the front of a walker or the back of a wheelchair using Velcro straps. DIMENSIONS (LxW): 19 x 16.5 inches. COLOR: Assorted. WARRANTY: The manufacturer guarantees satisfaction with this product or it may be exchanged or returned for a full refund.

Kaye Anterior Forearm Support Walkers (Models Y2Fs, Y3Fs, & Y4Fs)

The Kaye Anterior Forearm Support Walkers are walkers with platform arm supports designed for use by individuals with neuromuscular disabilities associated with severe spasticity, athetosis, or ataxia who lean on their forearms because they cannot grip adequately to propel their walkers. These walkers are particularly useful for individuals who have asymmetrical strength in their upper extremities as they can propel and steer a walker with only one hand. The user stands inside the walker's bas

Kaye Anterior Support Walkers (Models Y2S & Y3S)

The Kaye Anterior Support Walkers are custom perscription walkers designed for use by individuals with neuromuscular disabilities associated with severe spasticity, athetosis, or ataxia. These walkers are intended for individuals who can support their weight on their legs and take steps, but lack sufficient balance or upper body and shoulder control to maintain alignment and often needing to be aligned slightly forward of the base of support to facilitate stepping. The user stands inside the wal

Kaye Kinder Chairs (Models K1 & K2)

The Kaye Kinder Chairs are positioning chairs designed for use by children with neurological or severe physical disabilities. These wooden chairs are designed for children between one and seven years of age up to 48 inches tall. Model K1 is a low chair designed to fit under preschool tables between 17 and 25 inches tall. Model K2 has long legs and is intended for use at standard 30-inch tables. Model K2 is suitable for children who have outgrown conventional highchairs, but still require that de

Kaye Partial Weight-Bearing Walking Frame (Model Sw1)

The Kaye Partial Weight-Bearing Walking Frame, model SW1, is a child's walker or standing frame designed for use by children who have a wide range of disabilities due to neuropathy, including postural control, interlimb coordination, and steady state and reactive balance. The Kaye Walking Frame supports the user in the upright, walking, or partial weight-bearing position using a combination of an overhead suspension frame, a manual winch, a harness, removable handlebars, and swivel casters with

Kaye Play Frame (Model Rs1)

The Kaye Play Frame, model RS1, is a suspension frame for toys designed to encourage reaching, batting and swiping skills for children with neurological, upper extremity, or severe physical disabilities. The height-adjustable aluminum frame enables the toys, hung from the included plastic flowers, to be moved farther from the child to encourage further skill development as skills improve. The base of the frame fits around Kaye corner chairs, bolsters, and prone positioners (see separate entries)

Kaye Supine Positioner (Model Sp2)

The Kaye Supine Positioner, model SP2, is a body positioner designed for use with children with neurological, severe physical, or visual disabilities. This unit provides a structure to enable children from one to six years of age to experience visually-directed play in the supine position, encouraging reaching, postural stability of the head and shoulder girdle, visual convergence, visual scanning, and visual attention. The unit consists an adjustable washabel nylon hammock support for the head

Kaye Wide Posture Control Walkers (Models R2B, R3B, R4B, R2Br, R3Br, R4Br, R2Bs, R3Bs, & R4Bs)

The KAYE Wide Posture Control Walker is a child's adjustable walker designed for use by children who wear hip-knee-ankle-foot orthoses and require additional width and deph inside the walker frame. The walkers are available with 2 wheels (models R2B, R3B, and R4B), 4 fixed wheels (models R2BF, R3BR,and R4BR), and 4 wheels with front swivel wheels (models R2BS, R3BS, and R4BS). The walkers fold for transportation. OPTIONS: Options include one-way roller-bearing wheels, forearm supports, a pelvi

Kayjae Portable Storage Desk (Models Sd121216, Sd121418, Sd161216, & Sd161216)

The KayJae Portable Storage Desk is a desk lapboard designed for use by people with disabilities. It features a tabletop with ample space for writing and drawing, a storage compartment for supplies, an attached ledge to hold books and papers in place, and a side latch to keep the storage compartment closed. A support rod is also included to hold the storage compartment open. It can be used in a tilted, level, or freestanding position. OPTIONS: A plastic book clip and a non-skid, tabletop rubber

Keep Warm Dish (Model 16T174A)

The Keep Warm Dish, model 16T174A is a food warmer dish designed for use by individuals with upper extremity or eating disabilities or spinal cord injury. The dish is designed to keep food warm throughout the course of the meal. Hot water is poured into the bottom chamber through a plastic funnel and the dish holds 22 ounces of food. The dish is not microwave safe, but it is dishwasher safe when placed on a top rack. DIMENSIONS: (HxW): 2 x 8 inches. WEIGHT: 2 pounds.

Kelvin Talking Thermostat

The Kelvin Talking Thermostat is a low vision thermostat designed for use by individuals who are blind or have low vision, mobility disabilities, or severe physical disabilities. This programmable thermostat controls heat, fan, and air conditioner functions. It can be operated by pushing its large tactile buttons, all of which talk, or through voice commands. To initiate voice commands, the user presses a button, claps hands, knocks on a table or desk, or whistles. When a button is pressed, a cl

Ken's Power Caster

Ken's Power Caster is a fishing accessory device designed for use by individuals with severe physical disabilities or spinal cord injury. This fully-automated device enables users to independently cast out their line, hook, fight, retrieve and land fish. The universal mounting bracket can be secured to almost any accessible surface (i.e. a wheelchair, boat rail, dock rail, etc.) and allows the cater to turn and swivel for casting in any direction. The unit consistently casts a large wooden bobbe

Key Largo

Key Largo is a modified keyboard designed for use by indivisuals with upper extremity or cognitive disabilities. This membrane keyboard can be set up with as few as two keys for simple choice making or it can be set up with a full 128-key latout for maximum functionality. The flexibility of the keyboard enables the user to have his or her own specific number of keys, keyboard configuration, specific letters, and specific pictures and/or speech feedback for communication and learning needs. Using

Keyboard Stand (Model H-38)

The Keyboard Stand, model H-38, is a keyboard tray and slant board designed for use by individuals with neurological or physical disabilities. This unit holds the user's keyboard at an angle such as 45 or 60 degrees, which reduces head-bobbing, where the user has to look down, then up at the monitor, then down, then up, etc. It also eliminates the accidental production of spaces by the palm of the hand, and puts the keyboard at an angle in line with the screen. The unit is lightweight and transp

Keystone Tutor

KeyStone Tutor is a computer instruction program designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. This software is designed for those who find it daunting to use speech recognition with a word processor. A simple incentive scheme encourages users to improve their enunciation which leads to higher recognition performance and a greater success rate in using the technology. COMPATIBILITY: For use on IBM and compatible computers. SYSTEM REQ

Keystrokes 3

Keystrokes 3 is an on-screen keyboard program designed for use by individuals with fine motor, upper extremity, neurological, and severe physical disabilities or spinal cord injury. It is a virtual on-screen keyboard program that allows the user to type with a mouse, trackball, head pointer, or other mouse emulator to enter characters into any standard Macintosh application. The program provides multilingual word prediction, including word completion, next word prediction, and multi-word predict

Kid Kart Tlc

The Kid Kart TLC is a stroller designed for use with children with severe physical or mobility disabilities. FRAME: The lightweight folding frame is 26.5 inches wide and is equipped with a height-adjustable padded push handle and a removable storage pack. The frame is available in a choice of black, yellow, or dusty plum. Options include transit tie downs and recline. SEAT: The seat shell can be positioned facing front or facing the rear and includes a tilt-in-space range of zero to 30 degrees.

Kid Kart Xpress

The Kid Kart Xpress is a stroller designed for use with children with severe physical or mobility disabilities. FRAME: The lightweight folding frame is 24 inches wide and is equipped with a height-adjustable padded push handle, transit tie downs, and an under seat fabric storage compartment. Folded dimensions are 24 x 28 x 20 inches. The frame is available in a choice of black, pink, purple, or teal. Options include a ventilator system, a ventilator base only, and recline. SEAT: The seat shell c

Kiddo

Kiddo is a sleeping system designed for children with health and mobility disabilities. It offers removable metal grids or wood slats as well as a 4-part rolling mattress platform. There is an electrically operated backrest that can be adjusted from 0-80 degrees. In addition there is an electrically operated knee break and a handset with a locking device. The Kiddo is equipped with 2 IV (intravenous) pole supports at the headboard.

Kids Mini Bowling Ramp

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized adaptation of a bowling ball ramp for a child with severe disabilities. This adaptation began with calculating how long and wide the ramp needed to be. The ramp needed to be narrow enough so the ball would not fall through but this can be adapted depending on the child’s size. The top portion sides are approximately 10 inches long, the cross pieces are 4 inches. The long portion consists of two 18 inch pieces with a straight co

Kids Sleeveless Bodysuits With Tummy Access

Kids Sleeveless Bodysuits With Tummy Access is designed for children who require tube feeding/administering of medication via a PEG/G-tube. There is a soft discreet center front opening with a snap closure. It is made out of cotton rich jersey knit fabric for fit and comfort. It is tag free to avoid irritation from annoying labels. It is designed with lower coverage in the leg than regular bodysuits to fully cover the bottom. The neckline, armholes and legs are bound in a soft stretchy rib, wh

Kimba Trs Twin Tandem & Kimba Trs Plus Twin Tandem

The Kimba TRS Twin Tandem is designed for use with children with mild to moderate disabilities and the Kimba TRS Plus Twin Tandem is designed for use with children with moderate to severe disabilities. This stroller offers dual reclining and tilt-in-space seating system frames on an in-line stroller frame. The seats can face forward or backward and individuals seats can be chosen to meet the user's specific needs. CAPACITY: 110 pounds.

Kinair Iv

The KinAir IV is an air flotation mattress designed for use by individuals with pressure ulcers or at risk for pressure ulcers. The KinAir IV combines advanced pressure relief therapy with a manual wound care turn to provide optimum skin care and positioning. Controlled air suspension and cushion depth help reduce interface pressure, assisting in the prevention and treatment of pressure ulcers. The Nurse Assist turn-and-hold feature helps to reduce shear, save staff time, and may reduce staff i

King's Pride 1000 (Models Kp48801, Kp54801, & Kp60801)

King's Pride 1000 is a heavy-duty motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. The bed has multiple positioning options, including Trendelenberg, reverse Trendelenberg, or cardio chair. Independent head and knee gatch allow personalized positioning. The foot section plateaus to reduce edema of the lower extremities. The bed has a foam mattress with Ventrex ticking and an eight-button control for all functions. OPTIONS: Digital bed scale (

Knit Capelet (Model 027)

The Knit Cape, model 027, is a cape designed for use by women with mobility and severe physical disabilities or spinal cord injury. This cape is made by a hand operated knitting machine, emphazing crochet detailing. This cape has a high back style designed to accommodate users with high level spinal cord injury. The garment separates into right and left facilitating the putting on and disrobing by an aid. Other features include four decorative buttons at the back with snap closures. SIZE: Extra

Koala Corner Chair

CUSTOM ADAPTATION PURPOSE: To provide seating and positioning for a child with microcephaly, epilepsy, and developmental disabilities. Made to dimensions specified by a therapist, this unit includes a chair with a footrest and a table that enable the child to be seated in a posturally and functionally correct position for learning, eating and playing. Made of plywood, the unit has a pedestal seat with a winged back for shoulder protraction. The seat and back panels are equipped with fabric-cove

Koolway Sports Winter Coat - Commander & Fleece

The Koolway Sports Winter Coat - Commander & Fleece is a winter coat designed for use by wheelchair users. This full-length coat has an outer layer of water-resistant commander and a fleece lining with insulation between the layers for warmth. The coat has a half-back to eliminate excess fabric when sitting; elastic cuffs at the wrist; side zippers from the cuffs to the bottom of the side seam; a zippered front extension from the lap to ankles; and zippered shoulder strap openings. The coat

Koosh Say It Play It (Model 881)

The Koosh Say It Play It, model 881, is a direct selection communicator designed for use by individuals with communication or speech disabilities. This device plays messages while simultaneously activating any connected device. The unit offers 20 seconds of recording time. POWER: Uses 4 double-A batteries. DIMENSIONS: 8 x 6 x 4 inches.

Krazy Drinking Straws

Krazy Drinking Straws are designed for use by children with oral motor disabilities. Available in sets of four heart straws or four happy straws (each set sold separately), these plastic straws are molded with the shape integral to the straw to encourage use and aid in developing oral motor control. OPTIONS: A set of eight connector straws is available.

Krazy Kat (Model 9209)

The Krazy Kat, model 9209, is a switch operated toy designed for use by children with upper extremity or severe physical disabilities. This adapted toy bounces up and down while making five funny sounds when a connected capability switch is activated (switch not included). This toy can also be motion activated without a switch. POWER: User 3 AAA batteries. DIMENSIONS (HxLxW): 6.5 x 5.5 x 5 inches. WEIGHT: 0.5 pounds

L.t. Switch

The L.T. Switch is a touch switch designed for use by individuals with upper extremity and severe physical disabilities. This switch can be used to activate switch-adapted toys and appliances and is highly sensitive, requiring only 0.75 ounce of pressure for activation. DIMENSIONS: 3.875 x 2 x 1.125 inches. COLOR: The switch comes with red, yellow, green, blue, and black plate overlays.

Lady Bug Switch (Model 729)

The Lady Bug Switch, model 729, is a touch switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. The slightest touch rewards the user with a choice of lights, vibration and/or music. This item has a special control which allows the user to select any or all of the rewards while activating a connected device. POWER: Uses two double-A batteries. DIMENSIONS (LxWxH): 9 x 6.25 x 4 inches.

Lady's Back Snap Slip

The Ladies Back Snap Slip is a slip designed for use by women with physical or mobility disabilities. This polyester and cotton blend slip has binding around the neck and arms. SIZE: Small, medium, large, extra large, extra extra large, and extra extra extra large. COLOR: White.

Ladybug Pop-Top

The Ladybug Pop-Top is a touched activated toy designed to introduce children age one year and older with cognitive or physical disabilities to cause and effect concepts. The toy is activated by lightly pressing the Ladybug’s head which sends the colorful balls bouncing with a fun popping sound. This action lasts only a short time, which motivates the child to activate the toy again and again. DIMENSIONS (HxW): 7 x 6 inches.er

Laidback Portable Reading Stand / Table

The Laidback Portable Reading Stand/Table is a notebook/laptop computer support or bookholder designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. Made of glass-reinforced ABS, this adjustable unit can be used in a recliner, on a sofa, or while lying in bed to hold most laptop computers or books in an optimal position for the user. It has handle built in to the top of the table surface for transport when folded. DIMENSIONS: The surface is 16 inches

Language-Links

Language-Links is a communicator and language tutorial program designed for use by individuals with communication or speech disabilities and severe neurological or physical disabilities. This program is a progressive language development system with ready-to-use pages designed by speech language pathologists who specialize in using augmentative and alternative communication (AAC) devices in clinical settings. Covering all levels of language development from preschool through adult, Language-Link

Laptop Support

CUSTOM ADAPTATION PURPOSE: To provide an individual with neurological disabilities with limited arm motion a means of comfortably accessing a laptop computer. This support is designed to enable the user to bring her wheelchair into position and then lower the support so that the computer is in her lap at the necessary angle. A rectangular plywood base with two vertical pieces at either side was designed to clamp to a table. Another plywood board with standard drawer runners at either side was

Large 5-Strap Rehab Wedge

The Large 5-Strap Rehab Wedge is a positioning wedge with straps designed for use with individuals with neurological or physical disabilities. This wedge has five straps positioned horizontally, from the top of the wedge to the bottom in equal intervals. Individuals can be positioned either prone or supine. DIMENSIONS (HxLxW): 16 x 72 x 30 inches.

Large Cup Holder With Round Wheelchair Attachment

The Large Cupholder with Round Wheelchair Attachment is a wheelchair cup holder with attachment designed for use by individuals with lower extremity and mobility disabilities, spinal cord injury and others who use wheelchairs. Designed for round tube wheelchair frames, this device attaches to either side of the chair and secures to wheelchair's metal frame. To open the attachment door, the user folds the door down to form the base of the cup holder, and adjusts the arms to accommodate 16-ounce t

Large Easel

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with severe phyical disabilities to access canvasas of various sizes for painting. Made of square steel tubing, the frame is designed to enable the user to access any part of a large painting from one position. The frame is equipped with a central board on which the painting is mounted with brackets at the bottom to hold the painting and a bracket at the top that adjusts up and down in a slot on the board using a knurled nut. The b

Large Glove Box

The Large Glove Box is an under seat caddy for a wheelchair or scooter designed for use by individuals with mobility disabilities. Made of water-resistant nylon, this caddy attaches under the seats of most scooters and motorized wheelchairs with the included hook-and-loop straps. DIMENSIONS: 12 x 5 x 9 inches.

Large Or Small Book / Utility Bag

Vinyl or sailcloth book/utility bag with loops to slide over push handles. Bags are made to custom sizes, with large being over 12 inches wide by 12 inches high by 2 inches deep and small being under 12 by 12 by 2. Wide color range.

Large Supiner

The Large Supiner is a positioning wedge designed for use by individuals with severe physical or neurological disaabilities or spinal cord injury. The unit comprises a wedge with a wide touch-fastening chest strap for proper trunk alignment and an oversize leg-support block for stable, full-leg support. Also included is a head-support roll. DIMENSIONS: Sized for individuals 60 to 72 inches tall. COLOR: Assorted.

Large Touch Pad (Model 3Tstl)

The Large Touch Pad, model 3TSTL, is a touch switch designed for use by individuals with severe physical or upper extremity disabilities. Pressing anywhere on the large top surface of this switch activates a connected switch-adapted toy or appliance. DIMENSIONS: 14 x 5.5 x 4 inches.

Large Wheelchair Headrest (Model 75909)

The Large Wheelchair Headrest, model 75909, is a headrest designed for use by individuals with lower extremity, mobility or severe physical disabilities, spinal cord injury and others who use wheelchairs. This headrest is designed to increase head support and comfort with minimal loss of range of vision to the user. It is made of highly tear-resistant polyurethane designed with relief contours for the user's ears. The width of the headrest is adjustable. It has a sturdy, full length metal insert

Last Straw

The Last Straw is a straw holder designed for use by individuals with grasping disabilities, upper extremity disabilities or amputation, spinal cord injury, or cerebral palsy. It includes a modular positioning hose, which attaches to the back of any seating system, using a quick release mini-wedge mounting system, and a removeable tube, which functions as the straw. The tube is fed through the modular hose which positions it in front of the user while the other end (which can be cut to length) i

Latching Pneumatic Switch Hd

The HD (heavy duty) latching pneumatic switch plugs into a 3-pin grounded power receptacle, allowing control of 120 volt appliances up to 10 amps. The air cushion actuator is operated by sips on the tube and may be mounted with screws, velcro or tape. the Actuator and 6 feet of connector tubing are not in direct contact with electrical power. Can be used in damp areas and washed. Those with sufficient breath- power may prefer a puff version of the switch, available on request. Can be used to tur

Latching Puff Switch Ld

The LD (light duty) Latching Puff Switch is rated for 24 volts up to 3 amps. It latches mechanically to an on or off position. No external power, batteries or adapter boxes are needed to maintain the latching action. A gentle puff of mouth air will set the switch to the on position. Another gentle puff of air will set the switch to off. Comes with a 40 inch detachable cord with a 1/8 inch mini plug. Supported by a light weight over-the-head band. Weight of the switch and headband is 3 ounces. Ca

Lateral Pads (Models 31460S, 31460M & 31460L)

The Lateral Pads are lateral trunk supports designed for use by individuals who use wheelchairs. Made of textured urethane self-skinning foam, these pads are equipped with T-nuts in all one-inch on center mounting holes. SIZES: Small, medium, or large. DIMENSIONS (WxDxH): The small pad is 3.25 x 4.25 x 1.25 inches. The medium pad is 4.25 x 6.25 x 1.25 inches. The large pad is 5.25 x 6.25 x 1.25 inches. COLOR: Black.

Laugh And Learn Puppy (Model 8034)

The Laugh and Learn Puppy, model 8034, is a touch-activated toy designed for use by children with upper extremity, cognitive, or severe physical disabilties. This puppy combines learning with musical play. It teaches body parts, colors, and the alphabet using fun phrases and songs that are activated by pressing the touch picture pad in front. POWER: Uses 3 double-A batteries. DIMENSIONS (HxWxL): 13 x 9.5 x 15 inches.

Lautzenhiser Drive Control

The Lautzenhiser Drive Control is a powered wheelchair controller designed for use by individuals with spinal cord injury or severe phyical disabilities. This fully-proportional alternative input device for powered wheelchairs features a miniature tilt-sensor that can be worn on the head, hand, finger, or foot providing precise command wheelchair and seat functions. Features include null-width (neutral zone) adjustment, adjustable on-delay timer (controls the time until the sensor is activated a

Lazee Mouse Cursor

The LaZee Mouse CURSOR is a mouse emulator designed for use by individuals with upper extremity, severe physical, or neurological disabilities, spinal cord injury, or repetetive motion injuries. This hands-free device provides full cursor control of computers or alternative and augmentative communication devices (AAC) through head or body movements. The self-contained unit can be head-mounted or positioned where the user desires. Tilt-sensor technology is utilized to perform the cursor movements

Lazee Mouse Pro

The LaZee Mouse Pro is a hands-free mouse alternative designed for use by individuals with upper extremity or neurological disabilities, spinal cord injury, or repetetive motion injuries. The LaZee Mouse Pro provides full mouse control of computers or alternative and augmentative communication devices (AAC), and enables users to control cursor movements through head or body movements, while providing real-time control of the left/right clicks and dragging via microphone. The LaZee Mouse Pro is f

Lazee Mouse Switch

The LaZee Mouse SWITCH is a hands-free mouse alternative designed for use by individuals with upper extremity or neurological disabilities, spinal cord injury, or repetetive motion injuries. The LaZee Mouse SWITCH provides full mouse control of computers or alternative and augmentative communication devices (AAC), and enables users to control cursor movements through head or body movements, while providing real-time control of the left/right clicks and dragging via external switches. The self-co

Leaf Switch (Model 58600)

The Leaf Switch, model 58600, is a lever switch designed for individuals with limited upper limb mobility. It is a single switch operated by pressing one side of the leaf. The tip of the leaf requires a quarter-inch of movement for operation and it provides tactile and auditory feedback. This switch has a removable foam pad. Mounting requires additional tubular mounting hardware. DIMENSIONS: The leaf measures 3 inches in diameter by 0.5 inches. The tube measures 13 inches long by 0.5 inches diam

Leaf Switch (Model 730, 730-8)

The Leaf Switch, models 730 and 730-8, is a lever switch designed to develop grasping skills for individuals with physical disabilities. It consists of a vinyl covered flexible spring, which when bent slightly in either direction will activate any adapted toy that it is hooked up to. The deflection angle should not exceed 45 degrees. It comes with the standard 0.25 inch jack and plug and can be ordered with a 1/8 inch jack and plug.

Leaf Switch (Models Cm-2 & Cm-7)

The Leaf Switch, models CM-2 and CM-7, is a lever switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This switch has a protruding flat vinyl-covered metal leaf and any flexion of the leaf activates a switch. The base has holes for mounting. Two different leaf lengths are available. DIMENSIONS: 6.5 x 1.75 x 0.5 inches. WEIGHT: 1 ounce.

Learning Baby Tad (Model 8030)

Learning Baby Tad, model 8030, is a switch operated toy designed for use by children with severe physical or upper extremity disabilities. When a connected capability switch (not included)is activated, the toy can access more than ten messages and lively songs that introduce the child to the alphabet, counting, body parts, and music movement. COLOR: Green. POWER: Uses 3 triple-A batteries. DIMENSIONS (HxLxW): 11 x 6 x 9.5 inches.

Learning Lantern (Model 1463)

The Learning Lantern, model 1463, is a switch operated toy designed for use by children with upper extremity, fine motor or severe physical disabilities. This musical lantern with a smiling face has been adapted with two switch jacks. Press one switch for sing-along songs and tunes and the other for sounds of the night. Children can enjoy seven sing-along songs, fun phrases, nature sounds and activities that help them learn about numbers, counting, animals, and day versus night. The Learning Lan

Leather Cape With Separate Sleeves And Belt (Model 019)

The Leather Cape with Separate Sleeves and Belt, model 019, is a women’s cape designed for us by individuals with mobility or severe physical disabilities, or spinal cord injury. Made of lamb leather, this cape comes with separate sleeves and is jersey-lined. Features include a lamb leather belt with 4 inch elastic at the center for additional comfort and to help the garment to stay in place. The standars style has an open back between the shoulders and the waist. A full back style is available

Leather Jacket With Double Ended Zipper And Belt (Model 018)

The Leather Jacket with Double Ended Zipper and Belt, model 018, is women’s jacket designed for use by individuals with mobility or severe physical disabilities, or spinal cord injury. Made of lamb leather and jersey lined, this jacket is available with a high back or regular length back with separating zipper and a 12-inch zipper at the wrist for ease in dressing. Other features include belt loops at the back hem on the longer length option (upon request) to help the wearer pull down fabric at

Leckey Squiggle Ess-Early Sitting System

The Leckey Squiggles Early Sitting System (ESS) is a 3-in-1 sitting system designed to provide support in sitting for children up to 4 years and 40 pounds with mobility and physical disabilities. The Leckey Squiggles ESS encourages 3 different types of sitting: 1. Dynamic Sitting – providing support to the trunk that moves with user's movements (this is a side view); 2. Long Sitting – sitting with legs out straight, often used to help stretch out the hamstring muscles on the back of the legs; an

Leckey Toilet And Shower Chair

The Leckey Toilet and Shower Chair is a caster shower commode designed for use with children with severe physical disabilities. Its wide mobile base allows it to be wheeled directly over a toilet, into a shower, or to simply stand alone as a commode. If desired, the base can also be removed and the seat mounted to any standard toilet. A removable, molded plastic tray with rimmed edges on all sides is also included. SEAT: Molded plastic seat with removable commode pail, two body positioning stra

Leckey Waistcoat

The Leckey Waistcoat is a vest restraint and torso support device designed for use by people with severe physical disabilities. This vest encourages development of proper trunk and shoulder positioning. Made of a lightweight material, the vest features two sets of adjustable vertical and horizontal straps that can be secured to the back of most chairs and seating systems with Velcro fasteners.

Lectro-Lok Footswitch (Models L2S & L4S)

Footswitch. 5 by 2 1/2 by 1 1/4 inches, dual foot operated momentary rocker switch. Pressure on one side, activates circuit independently of other side. All wiring inside housing with single cord exposed. Has mechanical interlock to prevent both circuits from being operated at same time rugged stamped metal housing. Nonskid base options include elimination of mechanical lock, latching switches. Weight 10 ounces. Each side 10 amps, 125 to 250 volt AC, 1/2 horsepower or 5 amps, 250 volt AC.

Left / Right Rocker Switch (Model 710)

The Left/Right Rocker Switch, model 710, is a dual switch activated by pressing the plate on either side. Pressing one end activates one switch; pressing the other end activates a second switch. An auditory click is produced when a switch is activated. A switch cable with a 1/8-inch jack is included. DIMENSIONS: 8 1/8 x 3 5/8 inches. WEIGHT: 5 ounces.

Leg Bag Holder

DO-IT-YOURSELF-ENTRY --- PURPOSE: To provide individuals with neurological disabilities greater freedom in meeting toileting needs when away from home. This device is a faux leather bag attached to a wheelchair, which houses a sealed holding tank. A Bard bed urinary bag, which holds twice the amount of a large leg bag, was used. The sealed holding tank connects to the individual via tubing and a catheter, which is changed daily. The pouch is suspended from the underside of the wheelchair seat (m

Lestronic Ii Battery Charger (Model 6815)

The Lestronic II Battery charger, model 6815, is a battery charger designed for use with wheelchairs and scooters. This 12-volt charger is a ferroresonant battery charger and has a patented electronic timer. The charger is fully automatic, turning on automatically when plugged in and shutting off when batteries are fully charged. The charger adds to range with each charge and to total battery life. This charger is designed for use with wet or flooded batteries (water required to be added to the

Lestronic Ii Dual Mode (Models 17750, 18330, & 18350)

The Lestronic II Dual mode, models 17750, 18330, and 18350 are battery chargers designed for use with scooters and powered wheelchairs. This fully-automatic charger is electronically controlled and has two modes. One mode charges conventional liquid electrolyte batteries, other charges gel-cell or other sealed cell batteries. The direct current (DC) output is 24 volts, 8 amps, tapering to 3 amps. DIMENSIONS (HxWxL): 8 3/16 x 8 11/16 x 6 7/16 inches long. WEIGHT: 16 pounds.

Lever Switch (Models Cm-8/cm-9)

The Lever is switch is designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. The switch is activated by pressing against a padded lever. OPTIONS: Mounting systems are available, including double-sided and quick-adjust swing-away. DIMENSIONS: The lever must travel 0.06 inch for activation. Model CM-8 is 9 inches long; model CM-9 is 7 inches long. WEIGHT: 4 ounces.

Levo Bookholder (Desk Model)

The Levo Bookholder (Desk Model) is a bookholder designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. This bookholder features a desk/table clamp and a bookboard that can be adjusted for right- or left-handed use in a variety of positions and angles. The glare-resistant bookboard secures and supports the reading material and is equipped with page holders for hands-free reading. The unit supports reading material from single sheets to newspap

Levo Bookholder (Stand Model)

The Levo Bookholder (Stand Model) is a bookholder designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. This bookholder features a cast-iron base with casters for stability and mobility, height-adjustable steel poles to support the bookboard, and a bookboard that can be adjusted for right- or left-handed use in a variety of positions and angles. The glare-resistant bookboard secures and supports the reading material and is equipped with page

Lexan Half Lap Tray, Left (Model 16C012-1L) & Lexan Half Lap Tray, Right (Model 16C012-1R)

The Lexan Half Lap Tray is a lap tray is designed for use by individuals who use wheelchairs. This tray has an epoxy-coated-steel slide- on mounting bracket. A hinged system allows the clear, see-through tray section to fold completely over thus leveling it with the side of the wheelchair when not in use. No tools are required for attachment. Model 16C012-1R is for right-handed use and model 16C012-1L is for left-handed use. DIMENSIONS (WxL): 10 x 20 inches.

Liberty Adjustable Desk

The Liberty Adjustable Desk is an accessible computer desk designed for use by individuals who use wheelchairs. This height-adjustable desk has a metal frame, legs, and rear modesty panel. The scratch-resistant laminate work surface has a solid oak smooth, rounded front edge and a rear oak chair rail to prevent computer hardware from sliding off. This desk also features a hinged "flip-top" door that runs the full length of the work surface for access to the cable channel. The desk is available

Life Alarm

Life Alarm is an emergency alert system with monitoring service designed for use by seniors or individuals with severe physical disabilities or spinal cord injury. The system includes a base unit and a waterproof pendant with a help button. When the user needs help, pressing the button causes the base unit to dial an emergency monitoring center. The pendant communicates with the base from up to approximately 200 feet away. Pressing the button establishes two-way voice communication with a help c

Life Alert Personal Medical Emergency Response System

Life Alert is an emergency alert system with monitoring service designed for use by seniors and individuals with mobility disabilities, severe physical disabilities, or spinal cord injury. The system includes a base unit located in the user's house and a pendant worn by the user. Pressing a button on the pendant activates the base unit, which communicates with a monitoring center, initiating amplified two-way voice communication between the user and the center's emergency operators, who will con

Life-Links Communication Suite

The Life-Links Communication Suite is a communicator program and academic and language tutorial designed for use by individuals with communication or speech disabilities and severe nerological or physical disabilities. This suite includes the progressive language development offerings of Language-Links (see separate entry) covering both pragmatic and semantically based approaches to the comprehensive capabilities of the Language-Links, Symbol-Links and Text-Links packages. Also included are the

Lifebreath Switch (Model 1062)

The LifeBreath Switch, model 1062, is a pneumatic switch designed for use by individuals with upper extremity and other physical disabilities. Gently blowing into the switch activates attached external devices. The switch is attached to a gooseneck with a universal clamp. This switch operates in latch, momentary, or timer mode. The timer adjusts from zero to two minutes. POWER: Uses nine-volt direct current. DIMENSIONS: The gooseneck is 19 inches long.

Lifefone Medical Alert System

The Lifefone Medical Alert System is an emergency alert system with monitoring service designed for use by seniors and individuals with severe physical disabilities or spinal cord injury. The system includes a base unit and a medical alert pendant or bracelet that automatically calls the Lifefone Emergency Response Center when its button is pressed. At this time the user's personal profile is displayed on a response center computer; emergency services are dispatched; designated neighbors, friend

Lifesos Personal Emergency Response System

The LifeSOS Personal Emergency Response System is an emergency alert system designed for use by seniors or individuals with balance, mobility, or neurological disabilities or who are at risk for medical emergencies. The system includes a base unit that connects to an existing telephone line and a remote transmitter that is worn by the user. In case of emergency, depressing a button on the transmitter activates the base unit, which then plays back an emergency message and automatically dials a fa

Lifestation Medical Alert System

LifeStation Medical Alert System is an emergency alert system with monitoring service designed for use by seniors and individuals with mobility, neurological, or balance disabilities or who at risk for medical emergencies. The system includes a console unit that connects to a telephone line, and a waterproof wireless transmitter pendant that can be worn in wristwatch, necklace, or belt clip style. When the user presses an emergency button on the console or the transmitter, the console unit autom

Liftem

Liftem is a bariatric transfer lift designed for use by obese individuals with severe physical disabilities or spinal cord injury. This powered overhead sling lift raises the user with a four-point lifting bar. The user's starting level can range from floor level up to 52 inches above the floor. The lift has an aluminum steel frame with an underbed clearance of 4.5 inches and an arm that rotates up to 60 degrees. It moves on front and rear casters with brakes in the rear. OPTIONS: Combination sl

Light Beam Indicator

Light Beam Indicator is a head-mounted pointing system using both a pointing rod and an adjustable padded nylon headset with a light pointer. The rod, which attaches to the nylon headset, projects out over the forehead and downward. The light pointer is positioned over the forehead and projects a concentrated light beam. Contact manufacturer for information on system options. POWER: Three "C" batteries. DIMENSIONS: 22 inches long. WEIGHT: 11.5 ounces.

Light Beam Indicator (Model 1)

Light beam indicator for an alternative pointing method. For individuals with limited neck, trunk mobility or positioning control. On/off switch, rechargeable power pack.

Light Beam Indicator (Model 2)

Lightweight flexible plastic headwand with washable forehead felt pad, cushioned chin strap and Velcro elastic band closure. Focused light beam indicator is mounted over forehead. Provides alternative pointing method for individuals with limited neck, trunk mobility or control when used with positioning. Weight 3.5 ounces. Light beam indicator has on, off switch adaptable to individual needs. Rechargeable power pack.

Light Locator Switch (Model 7770)

The Light Locator Switch (LLS), model 7770, is a buttonswitch designed for use by individuals with severe physical or upper extremity disabilities and low vision. This switch provides both a visual and a tactile cue. The red locator light guides the user to the switch. When the switch is pressed, the user feels vibrotactile stimulation and sees multi-colored blinking lights, all while activating any toy or device. POWER: Uses 2 double-A batteries. DIMENSIONS (LxWxH): 5 x 4 x 2 inches.

Light Pointer

The Light Pointer is an optical pointer designed for use by individuals with physical disabilities. This device projects a spot of light and is designed to be mounted on the user's head and pointed toward objects. The Light Pointer can also be used to activate the Light Activated Switch (see separate entry from this manufacturer).

Light Pointer With Headstick (Model Ii)

Model II Light Pointer with Headstick is a head-mounted pointing system using both a pointing rod and a light beam. An adjustable padded nylon headset holds the mountings for both the rod and the light pointer. The rod projects out over the forehead and downward. The light pointer is positioned over the forehead and projects a concentrated light beam. The light beam is visible under normal room lighting. POWER: Three "C" batteries. DIMENSIONS: 22 inches long. WEIGHT: 11.5 ounces.

Light-Activated Switch

The Light-Activated Switch is a photoelectric switch designed for use by individuals with physical disabilities. The switch is activated by directing a light pointer at a light-sensitive panel. POWER: 9-volt battery. DIMENSIONS: 4 x 4 x 2 inches.

Lighted Extra Loud Signalling Buzzer (Model 1360, 1360-8)

Lighted Extra Loud Signalling Buzzer, models 1380 and 1380-8, is a switch operated toy designed to stimulate visual and auditory training for individuals with physical, cognitive or sensory disabilities. When this device is activated by any switch (sold separately) a buzzer sounds and a small light turns on to alert the user that he has activated the switch. This model is similar to model 1350 (see separate entry), but has an exceptionally loud buzzer. It comes with a standard .25 inch jack or 1

Lighted Musical Box Plate Switch & Musical Box Plate Switch (Models 740, 740-8, 770, 770-8)

The Lighted Musical Plate Switch is a touch switch designed to teach cause and effect relationships for individuals with physical, sensory or cognitive disabilities. The switch is a bright yellow plate , that when pressed causes tiny lights to flash in sync with sounds from a built in music box. It can be used alone or as an external switch when connected to a toy. The Music Box Plate Switch is similar but without the lights.

Lighted Musical Tambourine

The Lighted Musical Tambourine is a switch operated toy designed for use by individuals with severe physical or upper extremity disabilities. This toy can be used alone as a musical instrument or as a switch to activate any toy. When the tambourine is swiped or slightly touched the multi-colored lights flash and music plays while the device begins to vibrate. Lights, music, and vibration can be turned on or off. POWER: Uses 7 AA batteries. DIMENSIONS (HxLxW): 8 x 10.5 x 10.5 inches.

Lighted Plate Switch (Model 750, 750-8)

The Lighted Plate Switch, model 750 and 750-8, is a touch switch designed for persons with hearing and mild visual disabilities. Activation of the switch is achieved by applying light pressure on the plate. Activation is indicated when the face of the plate glows with a bright white light.

Lighted Signal Switch (Model 956)

The Lighted Signal Switch, model 956, is a button switch and visual stimulation activity designed for use by children with cognitive, upper extremity, or severe physical disabilities. When this textured signal switch is activated, a bright light shines to encourage visual attention. POWER: Uses 2 double-A batteries. DIMENSIONS (HxD): 4 x 6.5 inches.

Lighted Signalling Buzzer (Model 1350, 1350-8)

Lighted Signalling Buzzer, models 1350 and 1350-8, is a switch operated toy designed to stimulate visual and auditory training for individuals with physical, cognitive or sensory disabilities. When this device is activated by any switch (sold separately) a buzzer sounds and a small light turns on to alert the user that he has activated the switch. It comes with a standard .25 inch jack or 1/8 inch jack.

Lighted Vibrating Signalling Buzzer (Model 1370, 1370-8)

Lighted Vibrating Signalling Buzzer, models 1370 and 1370-8, is a switch operated toy designed to stimulate visual and auditory training for individuals with physical, cognitive or sensory disabilities. This communicator informs the user of activation with a light, a buzzer, and vibration when the switch closure is made. It comes with a standard .25 inch jack or 1/8 inch jack.

Lights & Music Dome

The Lights & Music Dome is a sensory station designed for use by children with motor, neurological, or severe physical disabilities. This small-scale activity center provides sensory stimulation and cognitive activity.  Press the yellow button to activate the outer lights, and the red to activate the inner ones.  Press the green for one of 25 tunes and the blue to make the flower turn.  It can be used on a table top or during floor play. Up to four external switches can be added for switch a

Lightweight Half Step

This Lightweight Half Step is designed for persons with limited lower body mobility or anyone with walking disabilities. It is for those who find going up or down steps challenging. The Lightweight Half Step is designed to reduce the step height for older and for disabled people. It can be used indoors or outdoors. Made from durable recycled heavy duty plastic. Stable in sunlight and freezing conditions. Top of step has a cross hatch design providing a textured, nonslip service. Can be leveled b

Liko Original Sling & Liko High Back Original Sling

The Liko Original Sling and the Liko Original High Level Sling are transfer lift slings designedfor use with individuals with severe physical or mobility disabilities or spinal cord injury. The Universal High Level sling is intended for situations in which there is difficulty achieving sufficient lifting height. Loop lengths are minimized and the sitting posture is somewhat more reclined than with the standard model. The Original Sling provides support for the entire back and has a slightly high

Liko Scale

The Liko Scale is a scale attachment for transfer lifts designed for use with individuals with lower extemity, mobility, or severe physical disabilities, or lower extremity disabilities or lower extremity amputation. This electronic scale connects to the lift sling bar via a quick-disconnect mechanism. Features include a high visibility liquid crystal display (LCD) readout, and a variety of optional touchpad-accessible functions. CAPACITY: Up to 660 lbs.

Liko Universal Sling & Liko High Level Universal Sling

The Liko Universal Sling and the Liko Universal High Level Sling are transfer lift slings designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. The Universal High Level sling is intended for situations in which there is difficulty achieving sufficient lifting height. Loop lengths are minimized and the sitting posture is somewhat more reclined than with the standard model. The Universal Sling provides support for the entire back. The individual’s a

Likorail

The LikoRail is an powered transfer lift designed for use with individuals with lower extremity, mobility, or severe physical disabilities, lower extremity amputation, or spinal cord injury. This lift can be mounted on the ceiling, wall, or portable overhead frame. OPTION: A variety of sling and lifting options are available. CAPACITY: Up to 550 lbs.

Lil Lady Bug (Model 1416)

Lil Lady Bug, model 1416, is a switch-operated toy designed for use by children with severe physical or upper extremity disabilities. Activating an attached capability switch (not included) causes this ladybug to play 16 different children classics while colorful lights flash in time to the music. POWER: Uses 2 double-A batteries. DIMENSIONS (LxWxH): 5 x 4 x 2.5 inches.

Lil' Desk Mate

The Lil' Desk Mate is a height adjustable tilt desk designed for use by individuals with physical disabilities. This height-adjustable desk features a wide T-shaped base with locking casters and a two-section table top. The desk adjusts for right or left hand use. The smaller section of the table is fixed in a flat position, while the other can be used flat or tilted to support laptop computers, books, or papers. The Lil' Desk Mate's base can roll under most sofas, chairs or beds to position the

Limited Mobility Pistol Mount (Model LMPM)

The Limited Mobility Pistol Mount, model LMPM, is a pistol support designed for use by people with mobility or lower extremity disabilities or spinal cord injury who have limited hand or arm movement and strength and who use a wheelchair. A Limited Mobility Gun Mount, model LM100, and The Vacuum Trigger System, model TM100, are required with this device, but are not included (see separate entries). This device accommodates a variety of pistols, including auto loaders and double action revolvers,

Link To Life

Link to Life is an emergency alert system with monitoring service designed for use by seniors or individuals with spinal cord injury or severe physical disabilities. The service collects information on the user's medical history, medications, and allergies, together with a list of people to be called in case of an emergency. Users receive a lightweight, waterproof Help button that can be worn as a pendant or on a wristband, along with a base unit that connects to the user's telephone line. Pres

Lipsync (Models L1, L2, L3, & L4)

Lipsync is a mouth operated mouse designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. A mouth-operated joystick enables the user to move the cursor, while sipping and puffing triggers clicking and right clicking. The unit has a compact design for mobile computing and requires no software or drivers. Features include a green LED to provide visual feedback for left click, a red LED to provide visual feedback for right click, cursor speed adju

Liteshower Recliner Model

The LiteShower Recliner Model is a portable accessible shower stall designed for use by individuals with mobility or severe physical disabilities. The unit consists of a shower tray with collapsible walls to facilitate roll-in access; a folding screen and curtains that close around the sides; a handheld showerhead on a 7-foot hose that connects to a faucet; and a pump for draining the tray after the shower. The tray is placed on the floor near a faucet and a sink or toilet. The user reclines on

Liteshower Shower-In-Bed Model

The LiteShower Shower-in-Bed Model is a bed shower designed for use by individuals with mobility or severe physical disabilities. It allows a person to remain in bed during a shower. The unit includes a shower tray with collapsible walls for easy access, which is placed on top of the bed; a handheld shower head with a 7-foot hose that connects to a shower or faucet; and a waste water disposal pump. The user showers with a handshower connected to a faucet. After the shower, an electric pump drai

Lj-A (Life Jacket-Adapted)

The Lj-A (Life Jacket-Adapted)is a personal floatation device designed for use by children and adults with physical disabilities. This latex-free swimming aid maintains the user in an upright position while keeping the head completely out of the water. CAPACITY: Models are available to accommodate users from 18 to 250 pounds. WARRANTY: Unconditional money-back guarantee

Lobster Biball

The Lobster BibAll is a bib designed for use by children and adults with eating, swallowing, upper extremity, or severe physical disabilities. These reversible bibs have a soft French terry front and a lightweight backing coated in 100 percent rip-stop nylon. These bibs are silk screened with a lobster design. Machine washable and dryable, the bib has Velcro closure and comes with a carrying and storage bag. DIMENSIONS (WxL): 17 x 33 inches. COLOR: White. GUARANTEE: 100 percent satisfaction guar

Lockblocks Fasteners

Lockblocks Fasteners are surface anchors designed to mount tubular accessories such as flashlights, canes, and airpumps to any tube on wheelchairs, walkers, bed rails, etc. The mounts are flexible plastic with hook-and-loop strapping systems. Lockblocks Cross Channel mounts hold items perpendicular to the tube or rail with two straps, while Lockblocks Parallel Channel mounts hold items parallel to the rail with one strap. These fasteners are available in a variety of strap lengths and weights.

Lomak

The Lomak (Light Operated Mouse And Keyboard) is a modified keyboard designed for use by people who have difficulty using or are unable to use a standard mouse and keyboard, including people with upper extremity disabilities, neurological disabilities, arthritis, cerebral palsy, multiple sclerosis, muscular dystrophy and carpal tunnel syndrome. The Lomak’s keys are arranged in three circles with each key equidistant from the confirm key so that the keyboard can be operated with very small moveme

Long Cuff Thumbless Mittens (Models 177, 178, 179, 180 & 181)

The Long Cuff Thumbless Mittens, models 177, 178, 179, 180 & 181, are mittens designed for use by individuals with neurological, severe physical, or upper extremity disabilities. Made of 200 weight Polartec fleece, these mittens have a long side zipper and elastic at the wrist and slip over the hand. These mittens and a 7-inch cuff may be machine washed and dried. SIZES: Sizes to fit hands from 5 inches to 9 inches measured from middle line at the wrist to the tip of the longest finger. COLO

Long Sleeve Button Down Shirt With Velcro Closures (Model 404V )

The Long Sleeve Button Down Shirt With Velcro Closures, model 404V, is a men’s shirt designed for use by individuals with upper extremity or other physical disabilities. The polyester and cotton shirt has Velcro tabs behind the placket for closure. Buttons are sewn on the front for natural appearance.

Long Sleeve Shirt With Side Zipper (Model 008)

The Long Sleeve Shirt with Side Zipper model 008, is a women’s blouse designed for use by individuals with mobility and severe physical disabilities or spinal cord injury. This basic shirt is made of poplin stretch cotton and has an A-line cut, side slits, and a 30-inch invisible zipper on the right side for ease in dressing. SIZE: Extra small, small, medium, large, and extra large. COLOR: Black, white, pink, and gray.

Look And Listen

Look and Listen is a cause and effect training program designed for use by individuals with cognitive disabilities. It is designed to improve tracking ability of objects and increase the user's attention span. When the mouse, switch, or space bar is pressed, an object will move across the screen while music is playing in the background. The objects are large and colorful. Among the more than 100 graphic objects objects included are household items, cartoon images, foods, and many others. The pro

Look Here!

Look Here! is a visual stimulation activity designed for individuals with profound disabilities. The program provides visual stimulation by displaying a variety of light patterns and animations. The fifteen images can be modified can be modified with special effects. Options enable animation speed, object speed, and background color to be modified.User input is not required by the child. COMPATIBILITY: For use on IBM and compatible computers. SYSTEM REQUIREMENTS: Pentium or faster processor, Win

Love To Hug Winnie The Pooh, Tigger, And Piglet

Love to Hug Winnie the Pooh, Tigger and Piglet are stuffed animals designed for use by children with upper extremity, vision, and severe physical disabilities. These squeezable stuffed animals (each sold separately) ask for more hugs once thet have been squeezed. When the child leaves them alone for a few moments, they asked to be hugged again.

Lovehandles (Models Lh-18, Lh-16, Lh-14 & Lh-20)

LoveHandles is a transfer aid designed for use with individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. This device costists of a carbon frame with a seat and back support. Armrest-style tubular handles on each side and non-slip grips at each top corner of the backrest enable the individual in the device to be transferred by others to and from a pool, wheelchair, boat, automobile, airplane seat, up and down stairs, etc. The device come

Lovely Monkey (Model 8045)

The Lovely Monkey, model 8045, is a switch operated toy designed for use by children with severe physical, neurological, or upper extremity disabilities. Activating a connected capability switch causes this plush monkey to swing its head and play the xylophone. POWER: Uses 2 double-A batteries. DIMENSIONS (HxWxD): 7 x 4 x 5.5 inches.

Low Bed 800 (Model Lb3848)

The Low Bed 800, model LB3848, is a motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. Includes a foam mattress with Ventrex ticking and an eight-button control for all functions. The bed has multiple positioning, including Trendelenberg, reverse Trendelenberg, cardio chair, and personalized positioning with independent head and knee catch. The foot section plateaus to reduce edema of the lower extremities. POWER: Uses 115 volts. OPTIONS: Digit

Low H Base Overbed Table (Model 11640)

The Low H Base Overbed Table, model 11640, is an overbed table designed for use by individuals with mobility or severe physical disabilities whose bed has low clearance. The table has a four point H-shaped base with four dual wheel nylon casters, two of which lock. Plastic glides are also included to replace the casters. The table also features spring-loaded height adjustment. DIMENSIONS(LxW): 26.38 x 15.25 inches (base); 30 x 15 inches (tabletop). The height with casters adjusts from 19.75 to 2

Low Pressure Sip N' Puff Switch

The Low Pressure Sip N’ Puff Switch is a pneumatic switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This system allows the user to switch devices, including auxillary communication devices, on and off with a sip or puff. The switch comes with mounting hardware.

Low Profile Switch (Model 3Tslp)

The Low Profile Switch model 3TSLP, is a touch switch designed for use by individuals with severe physical or upper extremity disabilities. This large surface switch has a low profile for easier use by individuals with limited range of motion and is operated by pressing on the surface. DIMENSIONS: 2.5 x 3 inches.

Luggage Rack (Model 97)

The Luggage Rack, model 97, is designed for use with wheelchairs. This rack mounts to the wheelchair step tubes and extends back to support luggage.

Lumbar Massage Heating Pad

The Lumbar Massage Heating Pad is designed for individuals with a permanent or short-term disability that affects the lower back- specifically, the lumbar region. It also has a heat option, with two settings, that operates independently from the massage. Can be secured around the torso with adjustable hook-and-loop fasteners. Contains two massaging nodes that target the five lumbar vertebrae. Nodes vibrate to massage. Heat automatically shuts off after 20 minutes. The pad is operated with a teth

Lycra Spandex Bathing Suit (Models 501, 502, 503, 504, & 505)

The Lycra Spandex Bathing Suit is a bathing or swim suit designed for use by individuals with incontinence or who have difficulty dressing themselves. These bathing suits have shorts intended to conceal a diaper and the Spandex stretches several inches to give diaper room. These suits have a no-snap inseam and a choice of front or back zippers for easy on/off. These suits are machine washable in warm water and require only brief drying. SIZES: Child's small to medium (model 501), child's large (

Machine Washable Sheepskin Bed Pad

The Machine Washable Sheepskin Bed Pad is designed for use by individuals who are at risk for pressure sores/ulcers. This dense pile pad can be used in a bed or chair where the 30-millimeter pile aids in reducing pressure on pressure points. Sleep directly on the wool for maximum benefit. Elastic straps hold the pad in place, but can be cut off if they are not needed. DIMENSIONS: The pad is 24 X 36 inches.

Machine Washable Sheepskin Wheelchair Pad

The Machine Washable Sheepskin Wheelchair Pad is a decubitus pad designed for use by individuals at risk for pressure sores. Designed to cover the entire wheelchair (seat and back), it is made of dense pile to reduce pressure on pressure points. Elastic straps hold the Seat Pad firmly in place. DIMENSIONS: 18 X 36 inches.

Maclaren Major 2000

The Maclaren Major 2000 is a stroller designed for use with children with mobility disabilities. FRAME: Folding square-section aluminum frame with square grip handles. The frame folds to 46 x 9.75 x 8.25 inches. The handle to ground height is 41 inches. SEAT (WxD): 15.5 x 11.5 inches. The seat back is 22 inches high. The seat to floor height is 23 inches in the front and 18 inches in the back, The standard seat is a sling seat with harness. Options include a removable, washable padded seat; a ch

Magi-Mouse

Magi-Mouse is a mouse emulator designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. This wireless alternative input device replaces a standard mouse for computer cursor control or a pointer to navigate alternative and augmentative communication (AAC) boards. The device plugs into a USB or PS/2 port on any computer to begin mouse or pointer applications, with no additional software needed in order to utilize all of the features such as click

Magic Arm Mounting System (Model 1631)

The Magic Arm Mounting System is mounting hardware for control switches to be placed in virtually any position for individuals with physical disabilities. The adjustable arm attaches to a table or wheelchair by means of a one-piece base clamp. The arm can be further adjusted by flipping the lever at the joint of the arm, moving the arm into the desired position, and then flipping the lever back to lock it in place. The Magic Arm Mounting System comes with threaded circular and rectangular platfo

Magic Carpet

---- PROTOTYPE --------- PURPOSE: To design a prototype of a moving platform for pre-school aged children with mobility disabilities and/or lower limb disabilities to move around and navigate their environment. Created by designers at the Polytechnic University, Magic Carpet allows young children with mobility or lower limb disabilities to experience moving independently while learning and practicing the skills necessary for to maneuver a power wheelchair. The Magic Carpet consists of a carpeted

Magic Cursor 2000

MAgic Cursor is a cursor control interface designed to provide all mouse functions without the need for buttons or switches for individuals who have little or no hand strength or who have other upper extremity disabilities. By using a dwell selection to operate, Magic Cursor enables the user to perform all mouse functions by moving the cursor. When the cursor dwells on the item where the user wants to perform a funtion, it changes to the funtion box. With the function box, one can move left to

Magic Lighted Ball Switch (Model 895)

The Magic Lighted Ball Switch, model 895, is a touch switch designed for use by individuals with upper extremity or severe physical disabilities. This switch has a ribbed texture which invites the user to touch it. It also provides a multi-colored light show with nine different patterns and plays soft mechanical music while providing gentle vibration while activating a connected device. POWER: Uses 2 double-A and 3 triple-A batteries. DIMENSIONS (DxH): 8.5 x 4.5 inches.

Magical Light Show (Model 1672)

The Magical Light Show, model 1672, is a switched activated toy designed for use by individuals with severe physical or upper extremity disabilities and low vision. Once the yellow switch is pressed the user can feel subtle vibrations on the hands while the light show begins. The show features colored patterns shown against a black background and upbeat musical sounds. An external jack is included for a capability switch (not included). POWER: Uses 7 double-A batteries. DIMENSIONS (HxLxW): 11.5

Magical Mystery Switch (Model 1679)

The Magical Mystery Switch, model 1679, is a touch switch designed for use by individuals with upper extremity or severe physical disabilities. This switch operates in two different ways: Multicolored LED lights can be turned on to attract the user's attention and encourage him/her to touch the cloth ball in the center to activate the switch or, to encourage the user to explore independently, the lights can be left off. Once the ball is touched, the lights, vibration, a gentle breeze, and a conn

Magical Spinning Light Wall Panel (Model 3135)

The Magical Spinning Light Wall Panel, model 3135, is a touch activated toy designed for use by children with severe physical disabilities or upper extremity disabilities. This wall-mounted toy has a display with 32 colorful patterns, and it can play six different New Age tunes. Once the round silver frame around the display is pressed, the user can watch the multi-colored light show,hear one of the six tunes and feel a mild vibration. It has an on/off adjustable volume control. This wall panel

Magictrol (Model Mtg311A)

Switch has 3 microswitches which may be sequenced through 4 positions. Switch can be activated from up to 30 feet when connected with 1/8 I.D. tubing to pneumatic push button 6431 (see separate entry). Requires impulse pressure of 1 psig to switch from one position to another. Each microswitch is rated at 15 amps, 250 vac, 1/2 hp.

Magnaready Shirt

The MagnaReady Shirt is a men's dress shirt designed for use by with limited mobility or dexterity, rheumatoid arthritis, Parkinson's or other upper extremity or neurological disabilities. Made of 100 percent cotton 80s 2-ply pinpoint oxford, this dress shirt is eight magnetic fasteners on the front that look like a button-down shirt when closed. The magnetic fasteners are intended to facilitate dressing by eliminating the need to maneuver buttons through buttonholes. To close each fastener, the

Magnetic Finger Switch

Magnetic Finger Switch consists of a finger sleeve containing a magnet, plus a small external switch unit. A small movement of the finger toward the switch unit activates the switch. The switch has a 3.5 millimeter plug. DIMENSIONS: Switch is 0.25 x 1.5 inches.

Maitre D'oor, The

The Maitre D'oor is a powered sliding door operator designed for use by individuals with upper extremity, mobility, or severe physical disabilities or spinal cord injury. This unit fits most sliding doors and can be used on existing doors with right- or left-hand openings. Features include six door speeds, six delay settings to adjust the time the door stays open before closing, a closing signal to alert to door closing, a doorbell for use when the door is in locked mode, and remote echo to aler

Makita Automatic Drapery Opener System

The Makita Automatic Drapery Opener System is a powered drapery control system designed for individuals with a physical disability. The system can carry over 60 pounds of draperies over a 20 foot span at a track speed of ten inches per second. Another motor can be added if this capacity needs to be exceeded. The Opener automatically self centers draperies and has an automatic stop. It also incorporates an automatic cut-off to help prevent motor overheating. The motor has a slip clutch mechanism

Male Urinal

The Male Urinal is a male sheath urinal designed for use by men with mobility disabilities, severe physical disabilities, mild urinary incontinence, or spinal cord injury. Made of durable plastic, this urinal has a capacity of 33.8 ounces and features volume markings on the side. It is equipped with a convenient cover and easy grip handle. The unit can be positioned on a bed rail or chair or used while lying in bed. The unit can be washed with soap and water or with an autoclave.

Male Urinal

The Male Urinal is a urinal designed for use by men and boys with severe physical disabilities. This urinal is designed to help prevent spills and has a sturdy grip for handling. The unit can be used in several positions by an individual in bed. Lightweight and designed to be easy to clean, this urinal is equippped with gradation marks to measure output and a cap to help confine odors. The urinal holds 32 ounces.

Male Urinal With Cover

The Male Urinal with Cover is designed for use by men with mobility or severe physical disabilities. This plastic urinal has an integral L-shaped handle, a wide base for stability, a cover, and a one-quart capacity.

Maltese Puppy (Model 438)

The Maltese Puppy is a switch-operated toy designed for use by children with severe physical or upper extremity disabilities. This toy puppy walks, barks, and wags its tail when activated by a capability switch (not included). Equipped with a grooming brush. POWER: Uses 2 AA batteries. DIMEMSION (HxLxW): 5.25 x 8 x 3.75 inches. COLOR: White.

Maltron Head / Mouth Stick Keyboard

The Maltron Head / Mouth Stick Keyboard is a 105-key modified keyboard designed specifically for use with a mouth stick or headwand. This Plug-n-Play keyboard has a concave front and a Frequency of Use letter layout with frequently used characters in the central area to reduce head movement for individuals who use a mouth stick or are single finger typists. The unit may be mounted on an articulated arm or positioned flat for single finger operation. The alphabetic keys are positioned in the midd

Mandarin Duck (Model 176)

The Mandarin Duck, model 176, is a switch operated toy designed for use by children with upper extremity or severe physical disabilities. When activated, this colorful toy duck will play a tune and bird songs while its wings flap and its head rocks. This toy is activated by a capability switch (not included) that connects to the duck with 0.125-inch plug. This toy also works without a switch. POWER: Uses 3 AA batteries (not included). DIMENSIONS (HxLxW): 5.5 x 8 x 3.75 inches. WEIGHT: 0.5 pounds

Mariner

The Mariner is a wheelchair shower commode designed for use by individuals with severe physical, lower extremity, or mobility disabilities or spinal cord injury. This commode comes standard with a commode pan and holder with safety strap. FRAME: The lightweight, folding aluminum frame with stainless steel hardware fits over most elongated toilets and can be used in the shower. Push handles are standard. This chair is 26.5 inches wide open and 12 inches wide folded. SEAT (WxDxH): The standard fou

Markfield Mobile Commodes And Accessories (Model 168 )

The Mobile Commode and Accessories, model 168, is portable commode designed for use by individuals with mobility disabilities. This commode was designed for re-usability/re-issue. Made from plastic-coated steel tubing, this mobile commode comes with a cellular molded commode seat, backrest, over seat, and padded detachable armrests. Other features include a pushing handle, commode bowl, and two brake and two plain castors. The castors are bolted to the frame for added safety. OPTIONS: 4 braking

Maroon Spoon

The Maroon Spoon is a child spoon designed for use in feeding therapy or for use with children with oral sensitivity, tongue thrust, or poor lip closure. These break-resistant plastic spoons have a long handle and a narrow bowl. SIZES: Small and large COLOR: Maroon.

Martin 16 Sloop

The Martin 16 Sloop is an accessible sailing boat designed for use by individuals with mobility disabilities, severe physical disabilities, or spinal cord injury. The boat has a ballasted drop keel to prevent capsizing, and will stay afloat even when flooded. The keel is a high lift keel for stability. Sail trimming is combined on one line, and the boat can be rigged by one person. Control features include a joystick helm system that controls the transom-hung rudder; a self-tacking, boomed jib;

Marvin The Mule (Model 919)

Marvin the Mule, model 919, is a switch operated toy designed for use by children with upper extremity or severe physical disabilities or spinal cord injury. This plush toy has been adapted with a jack for a switch (not included), and when the switch is activated, the mule walks, opens its mouth, and moves its ears back and forth. POWER: Uses two C batteries (not included). DIMENSIONS (LxH): 9.5 x 12 inches. COLOR: Grey.

Massaging Pillow (Models 3128 & 3128A)

The Massaging Pillow, models 3128 and 3128A, is a vibrating pillow designed for use by individuals with upper extremity or severe physical disabilities.This pillow was designed to be used to help promote proper posture and provide back and neck support for activities such as activating a capability switch. It has low and high vibrating modes, and it can be used while in a wheelchair, office or automobile. POWER: Requires 2 D batteries. DIMENSIONS (DxLxW): 5 x 13 x 13 inches (model 3128) or 4 x 1

Mattress Genie

The Mattress Genie is an inflatable mattress raiser designed fro use by individuals with severe physical or respiratory disabilities or back pain. Placing the inflatable unit under the head or foot of the bed enables the user to raise the head or the foot up to a 40-degree angle. A three-button hand-held lighted remote enables the user to control the attached air pump to increase or decrease the angle of elevation or return the mattress to the horizontal position. The elevation unit is attached

Mattress Straps

CUSTOM ADAPTATION PURPOSE: To prevent a plastic-covered mattress from sliding off a home hospital-style bed. The hospital bed has a plastic-covered mattress on top of the main mattress. The plastic cover caused the mattress to slide off the bed while the user was in bed. Long belts were made out of seat belt webbing and buckles were attached to each end. The belts were then bolted to the underside of the bed. When buckled over the mattress, the belts hold the mattress in place and prevent it fr

Matty

The Matty is a bib designed for wear by children with eating and swallowing disabilities. These washable cotton bibs are waterproof and breathable and fasten behind the neck. SIZES: Children's small/medium, large, and extra large and adult small/medium, large, and extra large. COLOR: Moss green, light blue bandana print, navy, lavender, purple floral, blue floral, and denim.

Maxi Rest Bariatic Bed (Models 4748B, 4748D, 4748Dx, 4748Sb, 4748Sd & 4748Sdx)

The Maxi Rest Bariatric Bed, models 4748B, 4748D, 4748DX, 4748SB, 4748SD and 4748SDX, is a motorized bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features standard powered height adjustment, fowler backrest and leg lift and optional powered Trendelenburg and reverse Trendelenburg. It has a battery backup and a standard remote control. A one-piece frame (models 4748B, 4748D and 4748DX) or two-piece frame (models 4748SB, 4748SD

Maxi Sky 1000

The Maxi Sky 1000 is a bariatric ceiling lift designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. This bariatric lift system enables a single caregiver to perform transfers using the handset control without manual lifting. The lift cassette can be installed on a semi-permanent gantry or a permanent ceiling-mounted straight track. A full range of bariatric loop or clip slings can be attached to the four-point sling bar. Regulation of l

Maxi Sky 440

The Maxi Sky 440 is a portable ceiling lift designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. This portable ceiling lift allows a single caregiver to perform transfers using the handset control without manual lifting. The lift has a compact cassette with folding sling hooks and an integrated carrying handle. The lift has a Tarzan hook feature that allows the "swing" transfer of both lift cassette and user directly from one track to

Maxi Sky 600

The Maxi Sky 600 is a powered overhead transfer lift designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. This ceiling lift has a modular track system that allows the track layout to be adapted to a specific working space. The lift can be used for routine transfers of non-ambulatory individuals. A complete range of loop or clip slings is available for use on the applicable 4-point or 2-point spreader bar. The unit can also be used with

Mcm 1.0

MCM 1.0 is a mounting device designed for individuals with limited mobility in their arms due to neurological impairments such as cerebral palsy, stroke or traumatic brain injuries. The MCM1.0 allows users to mount control devices such as buttons or joysticks on either side of the headrests of wheelchairs or other locations. A round frame clamp is not included. Button adapter sold separately.

Mcm 1.0 Qs

MCM 1.0 QS is designed to aid in mounting and positioning switches on wheelchairs and workstations for individuals with limited fine motor or upper extremity disabilities due to spinal cord injuries or neurological impairments such as cerebral palsy, stroke or traumatic brain injuries. The Quickshift (QS) version has “ratchet-style“ handles at its joints to quickly adjust its position without the use of tools. A round frame clamp is included. Button adapter sold separately. COLOR: Black. WARRAN

Mcm 2.0

MCM 2.0 is designed to aid in mounting and positioning buttons or joysticks on both sides of the headrests of wheelchairs for individuals with limited fine motor or upper extremity disabilities due to spinal cord injuries or neurological impairments such as cerebral palsy, stroke or traumatic brain injuries. COLOR: Black. WARRANTY/GUARANTEE: As stated by the manufacturer.

Mealtime Protector

The Mealtime Protector is a bib designed for use by individuals with eating, swallowing, upper extremity, or severe physical disabilities. Designed to protect clothing from accidental spills, this bib provides chest to lap coverage. The bib is made of a polyester cotton blend front with a waterproof barrier underneath. Other features include hook and loop neck closure. DIMENSIONS (LxW): 36 x 17.75 inches. COLORS: Rose, green or navy print.

Mealtime Smock

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with upper extremity disabilities or tremors, arthritis, or grasping, eating, swallowing, or fine motor disabilities to eat without soiling clothing. Included in a chapter entitled "Kitchen & Meal Time," this article provides a pattern, detailed instructions, and illustrations for making a washable apron from an inexpensive vinyl tablecloth (more than one apron can usually be made from a single tablecloth). This alternative to a bib covers t

Med Aire Alternating Pressure Pump And Pad System (Models 14001, 14001Ef, & 14002)

The Med Aire Alternating Pressure Pump and Pad System is an alternating air pressure mattress surface designed for use by individuals who are at risk for pressure sores/ulcers. The variable pressure pump produces an air flow of eight liters per minute. It is available with a pad with end flaps (model 14001EF) or without end flaps (model 14001). OPTIONS: Fixed pressure pump and pad, model 14002; replacement pumps and pads; filter; clear or beige tubing; and a basket for alternating pressure pump.

Med-Alert

Med-Alert is an emergency alert system with monitoring service designed for use by seniors or individuals with balance, mobility, or neurological disabilities or who are at risk for medical emergencies. The system includes a tabletop receiver console and a pre-programmed waterproof transmitter that can be worn on the wrist or around the neck as a pendant. The receiver console connects to a phone line. In case of an emergency, the user presses a button on the transmitter and the console sends a m

Medfirst Alert

MedFirst Alert is an emergency alert system with monitoring service designed for use by seniors or individuals with balance, mobility, or severe physical disabilities or spinal cord injury. This personal emergency response system (PERS) has two components: a portable, waterproof transmitter, which the user wears on a wristband, necklace or belt clip, and a receiver base unit connected to the user's existing telephone line. If the user experiences a fall or other medical emergency or other type o

Medical Alert System

The Medical Alert System is an emergency alert system with monitoring service designed for use by seniors and individuals with mobility disabilities, severe physical disabilities, or spinal cord injury. The system includes a base unit and a waterproof button in wrist, clip-on, and pendant styles (all included). When the button is pressed, a signal is sent over the existing telephone line to a medical monitoring center, opening a line of communication. A member of the monitoring center team check

Medical Explosion Proof Foot Switches

Footswitch. Cast aluminum housing. Foot operated momentary switch. One or two pedal models. POWER: 5 amps, 125-250 volt AC or 3 amps 28 volt DC. DIMENSIONS: 10 x 9.75 x 4 3/8 inches. WEIGHT: 6.5 pounds.

Medical Monitoring Usa

Medical Monitoring USA is an emergency alert system with monitoring service designed for use by seniors and individuals with mobility disabilities, severe physical disabilities, or spinal cord injury. The system includes a base unit and a waterproof button in wrist or clip-on (all included)styles. When the button is pressed, a signal is sent over the existing telephone line to the operations center, opening a line of communication. When the associate determines the status of the member, two ass

Medical Sheepskin

Medical Sheepskins are decubitus pads designed for use by individuals at risk for pressure sores/ulcers. These tanned natural sheepskins are washable and can be used in hospital and nursing home beds, wheelchairs, and in homes on chairs and beds. DIMENSIONS: The average size is 9 square feet and the wool length is 0.75 inch long. COLOR: Natural.

Medline Advantage 2900 Max Mattress (Models Mscadv2976, Mscadv2980, & Mscadv2984)

The Medline Advantage 2900 Max Mattress is a foam mattress designed for use by individuals at risk for pressure sores. This pressure- relieving mattress is made of Densiflex and Densiflex HR foam, with a base layer of Densiflex HD, and is covered with Nylex Ultra Stretch fabric, a fluid-proof, antimicrobial, flame-retardant material. The heel section is sloped. The mattress is available with fire barrier fabric and/or a raised edge. DIMENSIONS (HxLxW): 6 x 76 x 36 inches (model MSCADV2976), 6 x

Medscope Medical Alert System

The Medscope Personal Emergency Response System is an emergency alert system designed for use by individuals with mobility, severe physical, or balance disabilities, or who are at risk for medical emergencies. The system comprises a transmitter and a base unit. When activated, the transmitter causes the base unit to contact a monitoring center. Wristband and pendant-style transmitters which activate at the press of a button are available. Also available are adapted and custom transmitters, which

Melody Express (Model 8007)

The Melody Express, model 8007, is a switch operated toy designed for use by children with upper extremity or severe physical disabilities. This musical train set invites children to play composer and conductor at the same time. When the colorful music-note tiles are snapped into the track slots and a connected capability switch (required but not included), the train goes around the track playing tunes. Seven popular children's songs and the C-scale are included. POWER: Uses 4 double-A batterie

Men And Women's Mealtime Protector (Model P13836)

The Men and Women's Mealtime Protector, model P13836, is a protective smock designed for use by individuals with eating, swallowing, or upper extremity disabilities or spinal cord injuries. The smock is cotton with a vinyl backing. SIZE: One size fits all. COLOR: The women's model is available in floral and assorted prints. The men's model is available in paisley blue and assorted prints and plaids.

Men's And Women's Multi Closures Flannel Pajama Set

The Men’s and Women’s Multi Closures Flannel Pajama set are pajamas designed for use by individuals with severe physical disabilities or spinal cord injuries. Made of 100 percent cotton flannel, these pajama sets features three side and shoulder closures and a top that opens on the side and under the arm. The top has a round neckline and loose sleeves. The bottoms open and close on the side for ease of access. All closed areas are held together by snap fasteners or Velcro closures instead of but

Men's And Women's Multi Closures Flannel Top

The Men’s and Women’s Multi Closures Flannel Top is designed for use by individuals with severe physical disabilities or spinal cord injuries. This flannel top has eight different closures, three on each side on top of the shoulder. The side of the top is also open under the arms to the end of the top for additional access to the side. There is also a closure on each side to keep it closed when not in use. The top is made of 100 percent cotton flannel and all openings have Velcro closures or sna

Men's Back Closure Flannel Hospital Gown

The Men’s Back Closure Flannel Hospital Gown is designed for use by men who spend a lot of time in bed. This gown can be totally or partially opened in the back to allow air flow between the skin and the sheets. Velcro brand closures, snap fasteners or ribbon tie closures can be used along the back of the gown. SIZE: Small, medium, large, extra large, extra extra large, or extra extra extra large. DIMENSIONS: Gown is 48 inches long. COLOR: Light pink, light green, lavender, yellow, white, red, l

Men's Casual T-Shirt Protectee

The Men’s Casual T-Shirt Protectee is a bib designed to protect clothing from spills for individuals with eating, upper extremity or severe physical disabilities and seniors. Made of cotton and nylon blend, the bib covers from the neck to waist and fastens at the neck with Velcro, snaps, or magnets. The bib is machine washable with cold water and dryer safe on low heat. COLORS: Black, maroon, gray, and dark blue with white stripes.

Men's Fleece Bed Jacket Style 1 With Velcro Brand Closures

The Men's Fleece Bed Jacket Style 1 with Velcro Brand Closures is a bed jacket designed for use by men who spend long periods seated or in bed. Made of 100 percent polyester anti-pill fleece, this bed jacket features loose sleeves, a right front bottom pocket, a V-neck collar, stitches at the arms, and two faux buttons on the front with Velcro closures hidden underneath. SIZES: Small, medium, large,and extra large. DIMENSIONS: Buttons are 7/8 inches in diameter. COLOR: Dark green, brown, gray, b

Men's Fleece Blood Pressure / I.v. Bed Jacket Style 1

The Men’s Fleece Blood Pressure/I.V. Bed Jacket Style 1 is a men's robe designed for use by men with mobility or other pphysical disabilities. The jacket comes with a choice of Velcro closures or snap fasteners on the inseam of the dolman sleeves to the elbow for quick access. It also features a bottom right front pocket, two faux buttons with hidden Velcro closures underneath, and a V-neckline. SIZES: Small, medium, large, and extra large. DIMENSIONS: Buttons are 7/8 inches in diameter. COLOR:

Men's Fleece Capelet With Fleece Lining

The Men’s Fleece Capelet with Fleece Lining is a men's cape designed for use by men with mobility or severe physical disabilities or who have had a stroke. The front of the capelet has a round edged collar, one Velcro closure, and two faux buttons. SIZES: Small, medium, large, and extra large. COLOR: Dark green, brown, gray, black, red, blue, fuchsia, white, or purple.

Men's Fleece Poncho With Velcro Brand Closure

The Men’s Fleece Poncho with Velcro Brand Closure is a poncho designed for use by men with mobility disabilities. Made without real buttons or zippers, this poncho allows free movement of arms and hands. This poncho has Velcro brand closure beneath the collar with a matching leather button. The wearer can put the garment over his head and tuck the tapered back panel under the hips or legs. SIZES: Small, medium, large, extra extra large, or extra extra extra large. DIMENSIONS: Velcro collar butto

Mercury Switch (Model 3Tsmv)

The Mercury Switch, model 3TSMV, is designed for use by individuals with severe physical or upper extremity disabilities. Mounted on a band, this switch can be worn on the hand, wrist, arm, leg, or head, and the switch is activated by slight body movements.

Mercury Tilt Switch

Mercury Tilt switch is activated by a change in position. This switch comes with a Velcro band for attaching to the wrist, arm, leg, etc. The switch has a 3.5 millimeter plug. DIMENSIONS: 0.38 x 1.25 inches.

Metal Reachers

The Metal Reachers are reachers designed for use by individuals with upper extremity or mobility disabilities. These reachers help users grasp items from hard-to-reach places, both above and below the user. The trigger handle pulls the jaw tight and the magnet at the end helps lift small metal objects. The reachers are available in a fixed model and a folding model. DIMENSIONS: The fixed models are available in 32 or 27 inches long. The folding reacher is 26.5 inches long.

Meville To Weville

MEville to WEville, is designed for use by students with learning, communication, cognitive, or reading disabilities. This curriculum systematically integrates reading, writing, speaking, augmentative communication, and listening for elementary students with disabilities in the moderate to severe range. It was developed to build a classroom community that promotes a sense of belonging. Each unit offers students a new and different perspective on themselves, their families and their school. In Un

Mickey's Melodies (Model 1214)

Mickey's Melodies is a switch operated toy designed for use by children with severe physical or upper extremity disabilities. Activating a connected capability switch (not included) or pushing down on Mickey's hand plays four different melodies. Shaped like a Mickey Mouse head icon, the unit has a picture of Mickey Mouse, Minnie Mouse, Donald Duck, or Goofy to illustrate each melody segment. POWER: Uses 2 double-A batteries. DIMENSIONS (LxWxH): 9 x 9 x 7.5 inches.

Mickey's Race Track (Model 8012)

Mickey’s Race Track, model 8012, is a switch- activated toy car designed for use by children with severe physical, mobility, or upper extremity disabilities. In this toy, Mickey Mouse drives a car around a track. When a capability switch (not included) is activated, Mickey moves his head and arms, talks, and counts. When the car is moving forward, Mickey counts from one to twenty. Turn the car around and he counts backwards. POWER: Car uses 3 double-A batteries; track uses 4 double-A batteries.

Micro-Switch

"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals with severe physical disabilities to operate switch-connected devices. To make this switch, use diagonal wire cutters cut the prongs and some of the rim from the lid of the Bubble Tape gum box to prevent it from closing completely. With a soldering iron burn a small hole in the rear side of the container. Run the stripped ends of the phono plug wire through the hole into the gum box. Hot glue the Styrofoam to the inside center of the bot

Microlight Switch

The MicroLight Switch is a touch switch designed to be activated by a feather light touch for individuals who have upper extremity motor disabilities. This switch requires 0.4 ounces of pressure and 0.25 inch of travel for activation and provides tactile and auditory feedback. The switch features a threaded screw insert for mounting (screw must be purchased separately) or it may be mounted with double-sided tape or Velcro. DIMENSIONS: 1.75 x 0.5 x 0.75 inches.

Microswitches.

Miniature push button snap action low force switches with activation pressure from .03 to 4.3 ounces. Switches have built in hysteresis and high reliability. Momentary or on/off.

Microwave Grips

These Microwave Grips, by Pampered Chef®, are designed for persons with disabilities that affect an individual’s ability to securely transfer hot or warm dishes from the microwave to the kitchen counter, kitchen table, or to a serving tray, etc. Made of heat resistant silicone. Raised ridges and bumps are designed to give the user a secure, comfortable hold. One order includes one set of two.

Midline Joystick Mounting Bracket

The Midline Joystick Mounting Bracket is a powered wheelchair controller bracket designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This bracket enables the user to place a wheelchair joystick from the severe left or right to midline. This mounting bracket also allows the joystick to be flipped out of the way for transfers or when not in use.

Milbat Keyboard Guard

The Keyboard Guard is custom keyboard designed for use by individuals with upper extremity disabilities. Available with or without a USB connector, the keyboard is contained in a metal tray to protect it from impact.

Millennial Crutch -- Set Of Two -- Large

Millennial Crutch-Set of 2-Large are designed for tall individuals with the use of only 1 leg, to assist them in walking or those who use crutches for walking. Shock-absorbing. This set of 2 crutches have an ergonomic grip and help the user maintain proper posture, reducing the chance of injury. The ergonomic grip is at an angle of 12 degrees, allowing for blood flow and reducing trauma to the nervous system. Reduces carpal tunnel syndrome and wrist tendinitis. The crutches also have an under ar

Mind-Controled Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a mind-controlled wheelchair using brain computer interface technologies for individuals with mobility and severe disabilities. Researchers at École Polytechnique Fédérale de Lausanne in Switzerland have developed a mind-controlled wheelchair which uses an artificial intelligence system called “shared control” making the brain-machine interface more usable. An individual uses his/her thoughts to create specific brain patterns that are re

Mini Alligator Tongs

These Mini Alligator Tongs are designed to help build fine motor and to improve grasping abilities or pre-scissor skills. With build-in finger grips.

Mini Carillon (Model 2201)

The Mini Carillon is a switch adapted musical instrument designed for use by individuals with severe physical or upper extremity disabilities. Songs are played on the precision-tuned bells by using the color-coded song cards and pressing the matching color on the switch plates below the bells. Song cards include familiar nursery songs including "Twinkle, Twinkle" and "Mary Had a Little Lamb." Users can also play their own tunes or seven additional pre-recorded songs including "Old MacDonald" and

Mini Cup Switch

The Mini Cup Switch is a buttonswitch designed for individuals with upper extremity disabilities who have a good ability to target smaller surfaces. It is a smaller version of the Cup switch (see separate entry) which is similar to the Cap Switch (see separate entry), but more durable since it is encased in a plastic cup. It comes with colored stickers for individuals with low vision. The base provides a surface for easy mounting on table, pillow or wheelchair bracket. The switch is operated by

Mini Eye-Talk (Model 3704)

The Mini Eye-Talk, model 3704, is a communication board designed for use by young children with severe physical disabilities and communication disabilities. Equipped with a self-contained, height-adjustable stand, this clear board enables the child to communicate using an eye gaze while still being able to see the surroundings, as well as the person with whom the child is communicating. DIMENSIONS (LxWxD): This communicator is 11.5 x 14.5 x 1/16 inches. OPTIONS: Gooseneck mounting clamp.

Mini Fan

The Mini Fan is a switch adapted appliance designed for use by individuals with upper extremity disabilities. This small one-speed fan is equipped with a 1/8th-inch jack to enable single-switch operation (switch not included). This fan can also be use in training new switch users in cause-and-effect. POWER: Uses batteries.

Mini Joystick With Pad Switch (Model 50120)

The Mini Joystick with Pad Switch, model 50120, is designed for use by individuals with upper extremity disabilities. This switch is a four-position gated joystick designed for individuals who can maneuver a joystick, but need a larger switch. The multiple switch is five switches in one; the joystick has four positions, and the fifth switch is activated by pressing the raised pad beside it. This switch can be used to control any device that requires five single switches, or it can be adapted to

Mini Joystick With Push Switch (Model 50200)

The Mini Joystick with Push Switch, model 5020, is a multiple switch designed to control any device that requires five single switches for operation by individuals who have severe physical or upper extremity disabilities or spinal cord injury. It can also be adapted to form five single or mono switch plugs for controlling any five devices operated by single switches (additional hardware needed). Four switches are activated by moving the hoystick in four directions; the fifth is activated by pres

Mini Oxygen Tank Holder For Wheelchairs (Model F706201001)

The Mini Oxygen Tank Holder For Wheelchairs, model F706202001, is a wheelchair oxygen cylinder carrying case designed for use by individuals with mobility and respiratory disabilities. It attaches to the handles and frame of the wheelchair and positions the tank behind the wheelchair to avoid interference with the user’s head or back. The tank holder is made of heavy duty waterproof nylon and has two pockets that can be used to hold one or two cylinders or other small supplies such as tubing.

Mini Plate Switch With Music & Lights (Model 1415)

The Mini Plate Switch with Music & Lights, model 1415, is a touch switch designed for use by individuals with upper extremity or severe physical disabilities. This switch activates a connected toy or device while activating lights and music. A one-eighth to one-eighth inch cord is included. POWER: Uses two double-A batteries. DIMENSIONS (LxWxH): 6 x 5 x 2 inches.

Mini Popper (Model 751)

The Mini Popper, model 751, is a switch- or touch-operated toy designed for use by children with upper extremity, severe physical, or mobility disabilities, or low vision. Pressing anywhere on the rim or the top of the toy sets balls bouncing inside the clear dome and activates lights and vibration. This toy can also be used with a connected switch (not included). POWER: Uses two double-A batteries (not included). DIMENSIONS (WxH): 8 x 4 inches.

Mini Pouch (Model 9)

Mini pouch attaches beneath the armrest on standard wheelchairs, armrest is loosened and straps slipped between the pad and arm of the frame. Single snap closure. Cordura nylon. 8 colors.

Mini Racer (Model 3204)

The Mini Racer, model 3204, is a switch-operated toy designed for use by children with severe physical, upper extremity, or mobility disabilities. Activating any of the four colorful tactile switches in the base causes the car to go in all different directions. POWER: The base uses one 9-volt battery and the car uses 2 triple-A batteries. DIMENSIONS (LxWxH): 16 x 13 x 2.25 inches.

Mini Relax

The Mini Relax is an environmental control unit designed to operate televisions, video cassette recorders, and other infrared operable devices. This scanning infrared transmitter controls the TV, VCR, or any other device that operates using infrared technology. The unit has the capacity to store up to six functions, such as changing channels and volume. Scanning provides auditory and visual feedback with adjustable scan speed and auto scan or hold scan. OPTIONS: Multiple-switch version. POWER: U

Mini Rib-It-Ball

The Mini Rib-It-Ball is a textured ball designed for use by children with low vision or fine motor, grasping, upper extremity, or mobility disabilities. This lightweight ball consists of an air bladder encased in denier nylon with Velcro closures. Nylon-covered closed-cell-foam ribs on the ball's surface aid in grasping and throwing and prevent the ball from rolling out of reach. High-contrast colors aid in visibility. The ball has a ring for teething on the top and a pull string to start vibrat

Mini Stunt Remote Control Car (Model 316-M)

The Mini Stunt Remote Control Car, model 316-M, is a switch-operated toy designed for use by children with severe physical or mobility disabilities. This car can be activated with the included remote control or with a capability switch (not included). A plastic tray with a lip on all sides is included to enable play in a confined area. POWER: Uses four double-A batteries (not included). DIMENSIONS: The car is 2.5 inches wide x 2.5 inches high and the tray is 14.75 inches long x 2.5 inches wide.

Mini-Dome Switch With Lights, Music & Vibration (Model 72-S)

The Mini-Dome Switch with Lights, Music & vibration, model 72-S, is a touch switch designed for use by individuals with upper extremity and severe physical disabilities. A light touch along the rim activates music, lights, and vibration. Particles in the dome spin. A connected toy or device is also activated. The unit can be used on a table or mounted on the wall or door with the optional hanger. POWER: Uses four double-A batteries (not included). OPTIONS: Wall hanger for wall mounting. DIME

Mini-Gumball Switch

The Mini-Gumball Switch is a touch switch designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. Intended for users who can access a smaller target area, this switch has a detachable mounting base with three holes and provides audible and tactile feedback. DIMENSIONS: The activation surface is 1.25 inches, the base is 2 inches, and the switch is 0.5-inch high. COLOR: Available in blue, red, green, yellow, or purple.

Mini-Mullion Proximity Reader (Model Sxf1050)

The Mini-Mullion Proximity Reader, model SXF1050, is a keyless door lock and security system. The system uses a credit card size command card, and does not require any contact between card and card reading sensor. The card does not have to be removed from wallet or purse to be read. The sensor is mounted on a mullion or narrow stile and has a reading range of up to 3 inches. The system has a tri-state LED visual indicator (red, green, amber) and provides audio feedback representing status and ac

Mini-Saucer Switch (Model 718-S)

The Mini-Saucer Switch, model 718-S, is a touch switch designed for use by children with upper extremity disabilities. Designed in a compact size for portability, this switch is useful for individuals without the hand or wrist motion necessary to operate traditional plate switches. Actuated by a light touch, this switch is equipped with a 1/8-inch plug. POWER: Uses batteries.

Minimal Motion Splint Switch Kit

The Minimal Motion Splint Switch Kit is a touch switch kit designed for use by individuals with upper extremit disabilities. This kit includes small dome-shaped touch-sensitive switch pads which can be mounted in thermoplastic hand splints or other orthotics or other devices. Equipped with a standard 1/8-inch plug, the switch can be used to activate any switch-adapted device for people with controlled finger motion who lack the range of motion or ability to operate standard touch switches. OPTIO

Miracle Mouse

Miracle Mouse is a mouse emulator designed for use by individuals with upper extremity disabilities. This hands-free computer control device enables the user to emulate mouse events with head movements. This device can be used to click, double click, scroll, drop and drag, and move a mouse around the screen. Features include dwell clicking, word prediction, ability to re-size the on-screen keyboard, and macro keys on the keyboard for launching programs. The device comes with video gaming softwar

Mission Control

Mission Control is a switch adapter and voice control module for computer input designed for use by children with neurological, upper extremity, or severe physical disabilities. This computer access device uses aFFx activators that enable a child to receive feedback on the amount of pressure applied. The device has four large, colored aFFx activators, a built-in microphone, and the ability to plug in attachments for the child's individual needs, such as switches or a USB camera. The device can

Mjm Bariatric Reclining Shower Chair (Model 196-26-Bar)

MJM Bariatric Reclining Shower Chair, model 196-26-BAR, is a bariatric caster shower commode designed for use by individuals with mobility, balance, or neurological disabilities or spinal cord injury. The chair has a PVC plastic frame and features a full-support commode seat, an elevating legrest and sliding footrest, and four threaded-stem casters. The backrest is covered in water-resistant vinyl mesh upholstery. DIMENSIONS(HxWxD): 50 x 30 x 21 inches in overall size. The seat is 22 inches hig

Mjm Bariatric Shower Gurney (Model 910-B)

The MJM Bariatric Shower Gurney, model 910-B, is a shower stretcher designed for use by individuals with severe physical disabilities or spinal cord injury. The stretcher's frame is made from PVC plastic. Features include a closed-cell pad, safety rails, and eight casters. DIMENSIONS (HxLxW): 31.5 x 79 x 32 inches with safety rails down and 40 x 79 x 32 with the safety rails up. The casters are 5 x 1.25 inches. CAPACITY: 600 pounds.

Mjm Bariatric Shower Gurney (Model 910-Db)

The MJM Bariatric Shower Gurney, model 910-DB, is a shower stretcher designed for use by individuals with severe physical disabilities or spinal cord injury. The stretcher's frame is made from PVC plastic. Features include a closed-cell pad, safety rails, and eight casters. DIMENSIONS (HxLxW): 31.5 x 79 x 32 inches with safety rails down and 40 x 79 x 32 with the safety rails up. The casters are 5 x 1.25 inches. CAPACITY: 900 pounds.

Mjm Deluxe Hower Chair (Model 118-3-Ff)

The MJM Deluxe Shower Chair, model 118-3-FF, is a wheelchair shower commode designed for use by individuals with balance, mobility, or neurological disabilities or spinal cord injury. Th is chair has a coated PVC plastic frame, with a commode seat, folding footrest, a backrest of water-resistant vinyl mesh upholstery, and four threaded stem casters. DIMENSIONS (HxWxD): 40 x 22 x 18 inches. The internal width is 18 inches. The seat height is 21 inches. The sasters are 3 x 1.25 inches. CAPACITY: 3

Mjm Portable Overbed Table With Casters (Model 699-F3)

The MJM Portable Overbed Table with Casters, model 699-F3, is an overbed table designed for use by individuals with severe physical disabilities or spinal cord injury. The frame is made from PVC plastic. DIMENSIONS (HxLxW): 28.5 x 46 x 19 inches. The table top is 19 x 25 inches.

Mjm Shower Gurney (Model 910)

The MJM Shower Gurney, model 910, is a shower stretcher designed for use by individuals with severe physical disabilities or spinal cord injury. This shower stretcher has a three-position elevating headrest and a closed cell waterproof foam pad with a full length drain pan. Side safety railings are secured with lock pins. Drop side railings allow barrier free transferring. The stretcher has six heavy-duty treaded casters, including a middle pair as well as pairs at each end. DIMENSIONS (HxLxW):

Mjm Sling Gurney (Model 915)

The MJM Sling Gurney, model 915, is a shower stretcher designed for use by individuals with severe physical disabilities or spinal cord injury. The stretcher has a PVC frame, dual drop side rails, four locking and two non-locking threaded stem casters, and an optional pad. DIMENSIONS (HxLxW): 30 x 79 x 28 inches with safety rails down. Casters are 5 inches or 6 x 1.25 inches. CAPACITY: 350 pounds.

Mjm Tilt-N-Space Shower Chair (Model 193-Tis & 193-Tis-Sq-Pail)

The MJM Tilt-N-Space Shower Chair is a caster shower commode designed for use by individuals with mobility, balance, or neurological disabilities or spinal cord injury. These chairs have coated PVC plastic frames and feature dual drop arms that secure with safety straps, a deluxe elongated open-front soft seat, a push bar, a footrest platform, and heavy-duty threaded casters. The backrest and legrest are covered in water-resistant vinyl mesh upholstery. The chair offers seven different positions

Mjm Transfer Board (Model 600)

The MJM Transfer Board, model 600, is a transfer board designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. The board is made of high density polyethylene, and has eight carrying handles and three web nylon restraint straps with side release plastic buckles. DIMENSIONS (LxW): 71 x 23.5 inches. The restraint straps are 2 inches.

Mobi Shower Trolley

The Mobi Shower Trolley is a powered height adjustable shower trolley specifically designed to enable safe and easy washing or showering while in a reclined/supine position. It is designed to be mobile and easy to maneuver. The Mobi Shower Trolley can be easily wheeled to and from any wet-room, making it an ideal bathing solution for a wide range of care settings. Four locking castors prevent movement during transfer.? It is suitable for use with a wide number of hoists.

Mobi-Rover Standing & Mobility Aid

The Mobi-Rover Standing & Mobility Aid is a walker designed for use by children with walking disabilities. Available in two sizes, this height-adjustable standing/walking aid utilizes a detachable body support harness with safety buckle to provide support and mobility. A swinging arm opening facilitates transfer from a sitting to standing position. Locking casters allow mobile or static use. DIMENSIONS: Size 1 adjusts from 22 to 27 inches high and the leg length adjusts from 11 to 17 inches.

Mobile Base For Sleep System

CUSTOM ADAPTATION PURPOSE: To provide mobility for a Dreama Sleep System used by a child with leukodystrophy and severe scoliosis. For comfort and to slow the development of the scoliosis, the child spends most of his time lying on his side. However, doing so in the bed meant he was isolated from household activities. To make the bed mobile, a frame was constructed of square tubular steel with a plywood base attached to the underside. Attaching the base to the underside of the frame enabled th

Mobile Corner Sitter

The Mobile Corner Sitter is a posture chair designed for use by children with mobility or severe physical disabilities. Designed for children ages 4 to 8 years up to 58 inches tall or smaller children ages 8 months to 4 years, up to 39 inches tall, these chairs are intended to help children develop postural control and encourage balanced weight bearing. Features include removable, adjustable head supports; a padded removable, adjustable abductor; a height- and depth-adjustable tray; swivel loc

Mobile Open Toe Overbed Table (Model 251C)

The Mobile Open Toe Overbed Table, model 251C, is an overbed table designed for individuals who spend long periods of time in bed or who use wheelchairs. Constructed of durable plastic- coated one-inch tubing, this height- and tilt- adjustable table has a U-shaped base with casters and a laminated teak wood top with raised edges on each side. Two durable plastic hand wheels enable the user or caregiver to raise or tilt the table allowing the top to be set at varying heights and angles. DIMENSION

Mobili-T Rover Off Road Wheelchair Kit

The Mobili-T Rover Off Road Wheelchair Kit is an all terrain platform for powered wheelchairs designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. Designed to allow the user to access parks, beaches, woods, golf courses, construction sites, farms, and nature trails, this device consists of a large metal platform equipped with over-sized all-terrain tires. The platform is mounted by driving the powered wheelchair up a ramp and then powered by the wh

Mobility Device For General Home Use

CUSTOM ADAPTATION PURPOSE: To provide a mobility device that would allow for movement through a family residence (with many obstacles), and be used as a shower chair for person with severe physical disabilities. A mobile chair was created with a plastic seat mounted on a steel chassis with three 250- millimeter (mm) wheels out of alignment. The wheels each have their own running track and their own axle alignment. The chassis is made from a steel bar shaped to suit the three-wheeled design. The

Model Iii Headstick

Model III Headstick is a head-mounted rod that can be used for pointing or typing. Adjustable padded nylon headgear hold a set of brackets into which the rod is clamped. When worn, the rod projects out over the user' s forehead and down in front of the face. An adjustable chin strap is available. A version of this headstick equipped with a light pointer is also available (the Model II). DIMENSIONS: 23 inches long. WEIGHT: 3.5 ounces.

Modification To Quick-Release Wheelchair Wheels

CUSTOM ADAPTATION PURPOSE: To prevent quick-release wheelchair wheels from being inadvertently released. The push rims on the quick-release wheels had been removed because the chair user could not propel the chair independently. Doing so, however, exposed the buttons which released the wheels, creating the danger of an inadvertent release if the wheels were bumped while going through doors. The quick-release feature was locked by machining sleeves to fit over the buttons and gluing them in pla

Modifications To Protect A Wheelchair

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adaptation to protect various parts of an electronic wheelchair for a child with right hemiplegia, vision impairment, and developmental delay. There were a number of fittings on the chair that needed attention and had been damaged by the child. The first issue was the control panel for the joystick, which had a thin film cover over the membrane touch buttons that set the direction and mode. The buttons didn’t work unless they were

Modified Bicycle

CUSTOM ADAPTATION PURPOSE: To enable a child with severe physical disabilities to experience bicycle riding. Designed for a child who is unable to walk or sit upright unaided, this cycle was created by modifying a standard child's two-wheeler. The first adaptation was to add a tow bar to the bike frame at the handle bars.The tow bar is equipped with a hand brake to aid in slowing the bike when going downhill. The existing seat was replaced by a larger one that provides greater stability; the se

Modified Child Bike

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted bike for a child with muscular dystrophy. The FREEDOM WHEELS workshop modification included the usual outrigger wheels and wider seat, plus hip and thoracic supports, a padded head plate, foot cups, and a tow handle. The handlebars were extended to make them easier for the child to reach. TITLE: Jaxson’s Wheels. JOURNAL: TAD Journal. REF: Volume 29, Number 3, September 2009: p. 11. PAGES: 2 (including cover).

Modified Child Tricycle

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adaption of a child tricycle for a child with Collagen 6 Myopathy. The child does not have enough strength to turn the tricycle pedals but is able to propel the trike himself using his feed on the smooth floor tiles in the family home. First, the pedals were removed, the cranks straightened, and then reattached to 25 millimeters out from the front wheel hub. This allows the child to use the pedals as footrests when he tires and nee

Modified Child Walker

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted walker for a child with muscular dystrophy who is unable to stand or walk independently. A bright yellow walker was adapted using FREEDOM WHEELS bike components which would provide the child with postural supports similar to bikes. A high-riser bar was attached to the frame of the walker under the seat then a back support plate and thoracic fins were mounted onto the high-riser. These components are height adjustable on th

Modified Foot Pedal.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Modification reduces the amount of travel needed to activate a foot pedal. A microswitch activated electric solenoid is attached to the chair operated by foot pedal, so it pulls on the chair in the same way as the pedal. Used to control the foot pedals on several machines in a garment manufacturing factory. SKILLS REQUIRED: Electrical. AUTHOR: Gugerty, J.; Tindall, L. TITLE: Tools, Equipment & Machinery Adapted for the Vocational Education & Em

Modified Pancake Switch (Model 769)

The Modified Pancake Switch, model 769, is a touch switch designed for use by individuals with severe physical or upper extremity disabilities. This large switch has a low rim to make it easier to activate. Touching the sensitive outside rim or anywhere on the top surface activates any connected toy or device. The switch comes with a clear cover for photographs or icons (not included). OPTIONS: Replacement covers. DIMENSIONS: The switch is 5 3/8 inches in diameter and the rim is 3/8 inch high. C

Modified Shower Chair

DO IT YOURSELF ENTRY --- PURPOSE: To support the head of a boy with Duchenne's Muscular Dystrophy whose neck muscles are too weak to support his head in a shower chair. A "standard" shower chair was modified by adding a head support made from plastic pipe and lawn chair webbing. The pipe was fitted into an elongated inverted U shape (approximately 6 inches wide and height as needed) and bolted to the back of the shower seat. A piece of lawn chair webbing was looped across the sides of the invert

Moen Grab Bar Shower Holder

The Moen Grab Bar Shower Holder is a holder for handshower designed for use by individuals with lower extremity, balance, mobility, upper extremity, or severe physical disabilities or severe spinal cord injury. This unit attaches to most vertical, horizontal, or diagonal grab bars without tools and accommodates most handshowers. DIMENSIONS: Fits grab bars 1.25 to 1.5 inches in diameter. WARRANTY: Limited lifetime warranty.

Moen Palm Grip Pause Control Handheld Shower

The Moen Pause Control Handheld Shower is a handshower with flexible hose designed for use by individuals with mobility, balance, neurological, or severe physical disabilities or spinal cord injury. This shower converts to a palm grip when the handle is removed. This handshower offers three settings: shower, massage, and pause. The pause feature enables the user to pause the water flow with the touch of a button. A lever enables spray adjustment. This lightweight unit extra-long flex-soft hose t

Moen Pause Control Handheld Shower

The Moen Pause Control Handheld Shower is a handshower with flexible hose designed for use by individuals with mobility, balance, neurological, or severe physical disabilities or spinal cord injury. This handshower offers four settings: shower, pulsating, massage, and pause. The pause feature enables the user to pause the water flow with the touch of a button. The unit also has an easy-to-turn, over-sized spray control. This lightweight unit has a soft-grip handle with safety strap for a secure

Molded Built-Up Handles

"DO IT YOURSELF" ENTRY --- PURPOSE: To enable people with grasping disabilities to hold and use a variety of utensils and tools. Sculpey is a soft, pliable polymer clay that works and feels like ceramic clay, but does not dry out when exposed to air. Users can shape it into any form and then bake it in a standard home oven or a toaster oven at 275 degrees Fahrenheit (130 degrees Celcius) for 15 to 30 minutes, depending on the size of the piece. Available in forty colors, once it cools, it can

Molded Hair Rinser (Model 1203)

The Molded Hair Rinser, model 1203, is a shampoo basin designed for use with individuals with severe physical disabilities. This molded plastic unit assists caregivers in shampooing the hair of individuals in bed or in a seated position. The unit features a built-in neck rest and a water drain channel.

Momentum Walk-In Bathtub

The Momentum Bathtub is designed for the elderly, people with severe physical disabilities, any person who is not able to step in/out the bathtub/shower with the goal of allowing them some independence and giving them a way to bathe with minimal assistance. The bathtub is slip-resistant with a power-lift chair with an optional leg rest that swivels into and out of the tub. User must press of a button for the leg rest to swivel. The Momentum Bathtub combines Hydrovescent Therapy, which lessens ac

Monitor Stand

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with spinal cord injury or severe physical disabilities to work on a computer in a reclined position. The monitor must be placed above the user with the face angled downward. To accomplish this, a commercially available monitor support arm was modified. The monitor mounting plate was removed and replaced with a plywood plate attached to the pivoting sub-base with a pair of hinges. Threaded rod, rod couplings, and steel flat stock were used to fa

Monty 3D Eye Hd

Monty 3D Eye HD is designed for use by individuals who have limited mobility of their arms and hands and use eye controlled movements to access AAC devices or touch tablets. This mounting system is designed to support any device weighing 2 kilograms/4 pounds. Every joint is equipped with a lever. No tools are needed for adjustment. CAPACITY: 2 kilograms/4 pounds. COLOR: Silver and Black. WARRANTY/GUARANTEE: As stated by the manufacturer.

Moon Switch

The Moon Switch is a round switch designed for use by individuals with limited upper extremity mobility and coordination as a result of neurological involvement, traumatic brain injury or spinal cord injury.  It has a 2 5/8" colored target area.  It is a sensitive switch requiring only a few grams of pressure to activate.  There is a clicking sound to signal activation. There are mounting options on the base of the Moon Switch.

Morgan Skirt

The Morgan Skirt is a women’s skirt designed for use by women who use wheelchairs who have difficulty dressing. This skirt has a removable front panel that comes in different colors. The front panel is attached to each side of the skirt with zippers. By unzipping one side of the panel the skirt opens like a wrap skirt that can be easily put on or taken off. Other features include an elastic waist, a higher back for seated comfort, and dual zippers on both sides of the front panel (unzipping just

Morphibian Gator (Model 423)

The Morphibian Gator, model 423, is a switch-operated toy designed for use by children with severe physical or upper extremity disabilities. This 4 x 4 amphibious vehicle is controlled with the included Palm Joystick Switch, enabling the user to control direction. This rugged vehicle can traverse the toughest terrain. POWER: The care uses 3 double-A batteries and the joystick uses 2 double-A batteries. DIMENSIONS (LxWxH): 7.75 x 5.5 x 4 inches.

Motivaid

MotivAid is an environmental control system designed for use by individuals with mobility, upper extremity, or severe physical disabilities,blindness or low vision, or spinal cord injury. This personal-computer-based system facilitates phone and email communication and control of the home. Using wireless voice recognition, a touchscreen, auditory scanning, or other controls, users can make and answer phone calls; send or receive email; manage an appointments calendar; access news, weather and ot

Motomate (Models 6060 & 6260)

The Motomate are driving hand controls designed for use by individuals with lower extremity disabilities or spinal cord injury and those with the use of only one hand. Designed to respond to driver commands, the user pushes forward to brake and downward to accelerate. Both of these actions are intended to correspond to the driver’s natural motions. This product features a padded grip and can be mounted to either the right or left side of the steering wheel to suit the user’s need. Model 6260 is

Motorhome Lift (Model 124)

The Motorhome Lift, model 124, is a mobile homelift designed for use by individuals with mobility disabilities or spinal cord injury. This steel lift is designed without a platform and operated by suspending the wheelchair and the user from a vertically pivoting arm. The arm pivots down to attach to the occupied wheelchair, then lifts the occupant and chair into the motorhome. Permanently attached nylon webbing attach chair to the arm of the lift (permanent, detachable or temporary visitor hooku

Motorized Drape Controller Plc (Model 3142)

The Motorized Drape Controller PLC, model 3142, is an environmental control unit designed for use by individuals with upper extremity disabilities, severe physical disabilities, and spinal cord injury. It works with any drape weighing up to 60 pounds, as well as vertical blinds and many horizontal blinds. Its automatic stops are user-adjustable to fully open, fully closed, and any point in-between. When power is applied, the unit moves the drapes from their current position to one limit position

Mount 'n Mover

The Mount 'n Mover is a wheelchair mounting kit for communicators, tablet or laptop computers, or a camera mount for wheelchair designed for use by individuals who use wheelchairs. The device can also be used to mount trays, easels, reading stands, remote controls and more. Available in single- or dual-arm horizontal models, the device is equipped with a quick-release mounting plate offering 0 to 90 degrees of tilt, a paddle to unlock the wrist joint to rotate the attached tray or device, and a

Mountee (Models Mt12 & Mt14)

The Mountee is a child's tilt-in-space wheelchair designed for use with children with mobility, neurological, or severe physical disabilities. FRAME(LxWxH): Open, model MT12 is 19 x 16 x 22 inches; folded it is 20.5 x 17.5 x 9 inches. Open, model MT14 is 21 x 18.5 x 24 inches. The folding, tilt-in-space frame offers 5 to 45 degrees of tilt from the vertical. Push handles are standard. A crah-tested transit frame is available on both models. SEAT(WxD): Model MT12 is 8 to 12 x 11 to 15 inches. Mod

Mounting Switch

The Mounting Switch is a touch switch designed for use by individuals with severe physical disabilities, spinal cord injuries, or upper extremity disabilities. This switch may be mounted in a variety of locations (though used primarily at the head level) and shaped for optimal positioning. The activation pressure of the switch is adjustable from one to three ounces and an audible click is emitted when the switch closes. DIMENSIONS: 6.5 inches long. WEIGHT: 3 ounces.

Mounty Moose (Model 4060)

The Mounty Moose, model 4060, is switch-operated toy designed for use by children with severe physical or upper extremity disabilities. When an attached capability switch (not included) is activated, the moose sings two country songs. POWER: Uses 3 double-A batteries. DIMENSIONS (HxLxW): 13 x 6 x 6 inches.

Mouse Button-Box (Model H-47)

The Mouse Button-Box, model H-47, is a switch-adapted mouse emulator designed for use by individuals with fine motor, neurological, or severe physical disabilities, spinal cord injury, or cerebral palsy. This interface is available with left- and right-click buttons on the left, left- and right-click buttons on the right, one large button on the left, or one large button on the right. Pressing two adjacent buttons moves the cursor diagonally. The unit has a USB connection so it works on both Mac

Mouthstick Holder

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with multiple sclerosis to have the mouth piece of the mouthstick near her mouth for ready access. The holder had to be adjustable, yet not impede access into or out of the user's wheelchair. A swivel joint from a "third hand" (two alligator clips and a magnifying lens mounted on a swivel base for use in soldering and the like) was welded to a thin-walled piece of pipe that matched the outside diameter of wheelchair rail. The thin-walled

Mouthstick.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Special purpose mouthstick for manipulating and lifting small object. A hollow aluminum arrow shaft is mounted in a mouthpiece of dental acrylic. The mouthpiece can be shaped to the individuals mouth contour much as an athletic mouthpiece is custom formed. a the other end of the shaft is a small suction cup. SKILLS REQUIRED: Dentist. AUTHOR: Wichita REC TITLE: Problem Solving With Rehabilitation Engineering: REC Tech Brief, Spring. REF:Book: Cerebral P

Mouthstick.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Allows an individual with no hand use to move objects, turn pages, use a paint brush, etc. 16 variations of mouthstick adaptations are described with a sketch of each. Plastic rod with rubber eye-dropper tip; custom plastic teeth impressioned mouth grip on aluminum 1/4 inch OD tube; stainless steel clips to hold implements; small rubber heel with slit to hold implements; tapered wood dowel with pencil eraser tip; dowel with mouth grip and erase on tip;

Mouthsticks (Models 5380-14, 5380-16 & 5380-18)

Mouthsticks models 5380-14, 5380-16, and 5380-18 are maulsticks designed for use by individuals with upper extremity disabilities, spinal cord injury, and severe physical disabilities. The three model mouthsticks all have a V-shaped mouthpiece that allows tongue movement. The Wand Mouthstick has a rubber tip and can be used for typing or page turning. Clamp-On Mouthstick holds a pencil, pen, or brush. The Vertical Pincher Mouthstick has a tongue-controlled pincher at the end which can be used to

Movable Communication And Learning Boards

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create custom adapted communication and learning boards for students with disabilities. These boards enabled students with high support disabilities to access communication aids and learning materials while they are in their different therapeutic positions. There was no commercially available adjustable board which could be moved into the various positions and be easily moved around. The original design called for a stand that was 700 millimeters

Moveen Syphon Bag

The Moveen Syphon Bag is a drainage bag designed for use by individuals with spinal cord injury, severe physical disabilities, or urinary incontinence. The bag is worn on the upper thigh, and allows users with limited hand dexterity to empty their bag using the attached tube. The user pushes open the drain, lowers the drain tube below the level of the bag, and the bag empties via the siphon principle while remaining in place.

Movemaster Patient Mover

The MoverMaster Patient Mover is a transfer aid designed for use by individuals with mobility, lower extremity, or severe physical disabilities or spinal cord injury. This device is manufactured with silver ion antimicrobial built in for the life of the board. It features anti-pinch hand holes, anti-static inhibitors, and an ergonomic design. The unit is made from high-density stress-relieved polyethylene and is x- ray translucent. Model 2018 is a stretcher model and model 2022 is a hospital mod

Movement Sensor Switch (Model 655)

The Movement Sensor Switch, model 655, is a motion detection switch designed for use by individuals with upper extremity and other physical disabilities. This switch operates in momentary, latched, or timer mode and activates the attached toy or appliance with the slightest movement in front of the sensor.

Movers Ans Shakers Mouse (Model 468)

The Movers and Shakers Mouse, model 468, is a switch or touc-activated toy designed for use by children with severe physical, mobility, or upper extremity disabilities or spinal cord injury. Activate a connected capability switch (not included) or press on the mouse's head, and this plush toy scoots along, shakes, and plays music for 15 seconds. POWER: Requires 2 double-A batteries. DIMENSIONS (LxWxH): 8 x 5 x 5 inches.

Movie Star Biball

The Movie Star BibAll is a bib designed for use by children and adults with eating, swallowing, upper extremity, or severe physical disabilities. This reversible bib has a soft French terry front and a lightweight backing coated in 100 percent rip-stop nylon. This bib is silk screened with an overblouse with a spread-collar V-neck, a decorated underblouse V-neck insert, and a faux belt. Machine washable and dryable, the bib has Velcro closure and comes with a carrying and storage bag. DIMENSIONS

Mr. Roboto (Model 322)

Mr. Roboto, model 322, is sensory busy box designed for use by children with with severe physical or cognitive disabilities. This robot-style head has pronounced features that activate lights, music, vibration, and spinning lighted mirror when pressed. A musical tune plays when the ears are pressed; six bright LED's (light emitting diodes) turn on simultaneously when the eyes are pressed; a spinning lighted mirror spins inside the head and vibration is turned on when the nose is pressed; and, a

Mss Tilt And Recline (Models 4635 & 4636)

The MSS Tilt and Recline model 4635 and model 4636 are pediatric positioning seats designed to provide growth adjustments and optimum positioning for children with physical or neurological disabilities. FRAME: The chair is available with in a small low frame (model 4635, or medium high frame (model 4636). Each chair can be converted to a floor sitter. The low frame (small) l model raises height by 3 inches, and the high frame (medium) model raises height by 10 inches. SEAT (WxD): The seat is 9 x

Mulepack (Model 7012) & Mulepack Ii (Model 7013)

The Mulepacks are wheelchair back pouches designed to carry things for the person in a wheelchair. Each caddy is made of heavy urethane coated Nylon pack cloth with a strong poly webbing for the straps and 2-way zippers with steel rings for good grip when opening or closing. The Mulepack II (7012) has a main storage area with a wallet and key pouch and large envelope pocket. The Mulepack I has a main storage area and one front envelope pocket. The packs will fit wheelchairs with or without push

Mullen Shower Base Bathtub Replacement

Mullen Shower bases are roll-in showers designed for use by individuals who use wheelchairs or who have walking or lower extremity disabilities. These bases can be installed with vinyl or tile floors and feature a clamping system on two access sides that secures the base to the vinyl floor covering or the tile floor adapter to prevent leakage. Built-in tile upstands on the other two sides contribute to the integrity of the water seals. The ribbed underside enables the unit to key into the floori

Multi Purpose 5 Pocket Pouch (Model 156)

The Multi Purpose 5-Pocket Pouch, model 156, is a wheelchair side pouch which may also be used on walkers. This transparent plastic carrying caddy features two adjustable hooks for fastening.

Multi-Adjustable Hip Spica

Multi-Adjustable Hip Spica is an adapted chair designed for children 18 months up to young adult who use hip spica casts. The front section of the chair has a storage area and easily separates from the seat for access. The back also fully reclines to achieve a more comfortable position during the recovery period.?

Multi-Positioning Sling Gurney (Model 920-R)

The Multi-Positioning Sling Gurney, model 920-R, is a shower stretcher designed for use by individuals with severe physical disabilities or spinal cord injury. The stretcher's legs and back can be adjusted to numerous positions with a multi-positioning ratchet. Other features include dual drop side rails, four locking and two non-locking threaded stem casters, and an optional pad. DIMENSIONS (HxLxW): 30 (safety rails down) or 38 (safety rails up) x 79 x 31 inches. Casters are 4 or 6 x 1.25 inch

Multipurpose 3-In-1 Wheelchair Scale (Model Sr755)

The Multipurpose 3-in-1 Wheelchair Scale, model SR755, is a digital wheelchair scale designed for use by individuals with mobility disabilities or spinal cord injury. The platform has two wheelchair access ramps, one on the right and one on the left side, and can accommodate wheelchairs, walkers, or standing users. The unit has a 16-character liquid crystal display (LCD) digital display that shows weight in either pounds or kilograms. It has built-in wheels and auto power shut down after 35 seco

Multipurpose 3-In-1 Wheelchair Scale With Oversized Platform (Model Sr755L)

The Multipurpose 3-in-1 Wheelchair Scale, model SR755L, is a digital wheelchair scale designed for use by individuals with mobility disabilities or spinal cord injury. The platform has built-in wheels and dual ramps, and can accommodate walkers, wheelchairs, and standing users. The scale has a 16-character liquid crystal display (LCD) digital display that shows weight in either pounds or kilograms. This unit is equipped with auto power shut down. POWER: Uses six D cell batteries and has a low-ba

Mumbo Hippo (Model 475)

Mumbo Hippo, model 475, is a switch operated toy designed for use by children with upper extremity or severe physical disabilities or spinal cord injury. This plush toy has been adapted with a jack for a switch (not included), and when the switch is activated, the hippo walks, growls, wags its tail, and stretches with her mouth open. POWER: Uses two C batteries (not included). COLOR: Brown.

Music & Light Caterpillar

The Music & Light Caterpillar, model 1207, is a switch operated toy designed for use by children with severe physical or upper extremity disabilities. Activating a connected capability switch (not included) or pressing the button on the caterpillar's back causes the caterpillar to play 16 different children's songs while four colored lights flash in time to the music. POWER: Uses 2 double-A batteries. DIMENSIONS (LxWxH): 10.5 x 3 x 5 inches.

Music Box (Model 702)

The Music Box, model 702, is an adapted music box designed for use by children with severe physical or upper extremity disabilities. Plug four capability switches (not included) into this bright box to hear unique melodies while lights flash. Each switch plays a different tune. POWER: Uses 4 double-A batteries. DIMENSIONS (LxWxH): 5 x 5 x 5 inches.

Music Machine (Model 703)

The Music Machine is a switch adapted musical instrument designed for use by individuals with upper extremity or severe physical disabilities. Attach a percussion instrument (not included) and activate a connected capability switch (not included) and it beats to any preset rhythm. The speed is adjustable. POWER: Uses 8 double-A batteries. OPTIONS: Instrument set with cluster bells, maracas, and a jingle stick. DIMENSIONS: 9 x 6.5 x 4 1/8 inches.

Musical Bright Plate Switch

The Musical Bright Plate Switch is a touch switch designed to activate toys and appliances for individuals with upper extremity disabilities. This switch features a bright plate on a dark base to assist users with visual disabilities. The switch activates with slight pressure on the plate and a melody plays at moderate volume on activation. The switch can be used alone for cause-and-effect training or it can be used with any switch-adapted toy or appliance with a 1/8th-inch jack. DIMENSIONS: 5 x

Musical Disco Ball (Model 1684)

The Musical Disco Ball, model 1684, is a switch-operated toy designed for use by children with upper extremity or severe physical disabilities or spinal cord injury. This toy has a built-in capability switch. Once the switch is activated, this toy spreads multi-colored ray of light around the room while one of six upbeat disco tunes plays. The toy is intended to increase listening skills and visual attention. This toy also connects to an external switch, such as a capability switch, through a .

Musical Ice Cream Truck (Model 10)

The Musical Ice Cream Truck, model 10, is a switch operated toy designed for use by children with upper extremity and mobility disabilities. Adapted for use with a single switch (not included), this brightly-colored toy plays a loud, lively tune while the child controls the truck's movements with the switch.

Musical Pig

The Musical Pig is a switch operated toy designed for use by children with upper extremity, mobility, cognitive or severe physical disabilities or spinal cord injury. This toy requires a capability switch (not included). It is activated using the capability switch or by squeezing the pig's hand. When activated, this plush pig, which stands upright, moves its arms and plays a musical tune. If the pig is grabbed by its neck, it will squeal and oink. POWER: Uses 3 AAA batteries. DIMENSIONS (HxW):

Musical Posture Trainer (Model 1120)

The Musical Posture Trainer, model 1120, is a posture switch designed to provide feedback with soft music for indivudals with little or no muscle control. It attaches to any part of the body with a velcro strap. This positive feedback device plays soft music when the desired position is achieved.

Musical Snail (Model1114)

The Musical Snail, model 1114, is a touch operated toy designed for use by children with severe physical or upper extremity disabilities. Useful for for auditory and color recognition, this toy enables children to make musical notes by pushing the large colored buttons. Users can also learn to play songs by following the colors on the musical cards. The toy also has eight pre-recorded songs that can played by pressing the auto play mode, then activating one of the buttons. POWER: Uses 2 double-A

Musical Swirl Art (Model 3961)

Swirl Art is a painting activity designed for use by children with cognitive and fine motor disabilities. The unit consists of a spinning containter into which a blank card is placed. Activating the attached capability switch (not included) causes the card to spin. Children apply paint Swirl Art is a painting activity designed for use by children with cognitive and fine motor disabilities. The unit consists of a spinning containter into which a blank card is places. As the card spins, children a

Musical Twinkle Mirror

The Musical Twinkle Mirror, model 658, is a sensory busy box designed for use by children with cognitive or severe physical disabilities. Activate a connected capability switch (not included) or roll the attached roller for music, sounds, and dancing lights. A mirror lets children see themselves. The two hanging toys provide great tactile fun. A stand is included. POWER: Uses 3 double-A batteries. DIMENSIONS (LxWxH): 12 x 2.5 x 10 inches.

Musical Twinkling Starlight (Model 2246)

The Musical Twinkling Starlight is a battery operated toy designed for use by children with severe physical or upper extremity disabilities. This musical toy mounts on a wall and has six calming songs. In addition to the six songs, the device provides the user with multi-colored blinking lights, adjustable vibration, a squishy tactile gel pad star and silver bead chains. The gel pad and bead chains provide a tactile experience while the music and lights provide auditory and visual stimulation.

Musical Twister (Model 3285)

The Musical Twister, model 3285, is a switch operated toy designed for use by children with severe physical or upper extremity disabilities. When a connected capability switch (not included) is activated, children watch a cylinder containing water with multi-colored glitter start to twirl while music plays . This toy is intended to improve visual attention and listening skills. It comes with two different choices for switch activation - on/off or momentary pause. POWER: Uses 6 C batteries. DIMEN

Mv-1

The MV-1 is a minivan with ramp designed for use by individuals who use wheelchairs. Designed from the ground up for wheelchair accessibility, this vehicle was engineered according to the principles of Universal Design, which allow for the ease of accessibility regardless of any mobility issues. It provides for the accessibility of most wheelchairs and scooters, while providing a comfortable and safe ride for all. This vehicle is equipped with an integrated deployable ramp with a shallow ramp an

Mv-1000

The MV-1000 is a direct selection communicator designed for use by individuals with communication or speech disabilities, including autism, cerebral palsy, developmental delays, and traumatic head injuries. Available as software only for use on existing hand-held devices running the Palm operating system or pre-loaded on a Palm Tungsten E2, it offers hundreds of pictures to help facilitate communication with male and female voice choices. This customizable system can be set to match the user's p

My First Driving School (Model 8008)

My First Driving School, model 8008, is a switch-operated toy designed for use by children with severe physical or upper extremity disabilities. Users race the cars around the track using the two specially adapted remote control steering wheels. Each remote has two gumball switches to move the car forward or to turn. The remotes also have two external jacks capability switches (not included). The set includes a racing track, signs, two remote control cars, and a carrying case that doubles as a

My Little Puppy (Model 9313)

My Little Puppy, model 9313, is a switch operated toy designed for use by children with severe physical and upper extremity disabilities or spinal cord injury. When the user activates the capability switch (not included), the puppy flaps its ears and claps to “If You’re Happy and You Know It, Clap Your Hands.” POWER: Uses 3 AA batteries. DIMENSIONS (HxLxW): 11 x 8 x 9 inches. WEIGHT: 1.5 pounds.

My Spoon

My Spoon is a powered feeder designed for use by individuals with eating disabilities, spinal cord injury, upper extremity disabilities, or upper extremity amputation. This device allows users to eat most types of everyday food with minimal help from a caregiver. The user sits upright to be fed. A base unit sits on the table next to a dish with four comparments, and an arm raises food to the user's mouth. The device can operate in manual, semi-automatic, or automatic modes, with a joystick, butt

Mytobii P10

MyTobii P10 is a portable eye-controlled communicator and computer designed for use by individuals with neurological or communication disabilities, cerebral palsy, multiple sclerosis, ALS, or spinal cord injury. The screen, eye control device, and computer are integrated into one unit, which mounts to a desk, bed, or wheelchair. The user's eye signature can be calibrated in 10 seconds by sitting in front of the screen and following an on-screen dot. The system can be configured for different ski

Name Writing Mitt

"DO IT YOURSELF" ENTRY --- PURPOSE: To enable an individual with grasping or fine motor disabilities to print his/her name or participate in a sponge painting activity. Attach foam or rubber letters to a Duramitt glove. These gloves are marketed by Playtex, Inc., and come in two styles. One type of Duramitt has a sponge covering on the palm portion of the mitt, and the other style has the tough scrubbing nylon covering on the palm portion. With either mitt it is possible to attach pieces of Velc

Natural Male External Catheter

The Natural Male External Catheter is a non-adhesive external catheter designed for use by males with urinary incontinence, spinal cord injury, or severe physical disabilities. This clear silicone catheter is held in place with an adjustable strap to reduce skin irritation for users who change external catheters several times a day for intermittent catheterization. The odorless catheter is latex-free to prevent latex-related allergic reaction. Catheters come in a box with 30 catheters and 3 reus

Nautilus Footswitch (Models Wp541S & Wp541D)

Foot operated momentary or latching switch. Aluminum casting piston type actuator. Can operate underwater. Waterproof. POWER: 20 amps 125 to 250 volt AC, 12 amps, 125 volt AC, or 6 amps, 250 volt AC. DIMENSIONS: 8 x 4 x 2.25 inches. WEIGHT 2 pounds, 8.5 ounces.

Ne-At Seat

The NE-AT Seat is a modular seating system of comfortable and supportive positioning pads designed for use in wheelchairs. Although each piece is available and can be used independently, the full NE-AT Seat comprises the NE-AT Seat, NE-AT Back, and NE-AT Headrest and is designed to fit into any mobility aid. The reusable and reshapable positioning pads are constructed of thick rubber bonded to nylon and filled with Styrofoam beads. This not only creates an airtight bladder, but adds cushionin

Ne-At Switch Multiplier

The NE-AT Switch Multiplier is a control switch input interface designed to allow up to five switches to control a single device. The input switches can be of different types, or they can be the same type. Input switches can be any standard special needs switch such as aa Zygo Lever switch, a Spec switch, or a Buddy Button (see separate entries). Any one of the input switches connected through the Switch Multiplier activates the device. The Switch Multiplier can be used with such devices as a po

Ne-At User Adjustable Lateral (Ne-Atural) Bracket Mount

The NE-AT UseR Adjustable Lateral (NE-ATURAL) Bracket Mount is lateral trunk support hardware designed for use by individuals with neurological or severe physical disabilities or cerebral palsy. This width-adjustable lateral bracket mount interfaces with most commercial and custom seating systems and converts most commercial and custom lateral brackets into lateral brackets that can be adjusted in width by the user or caregivers to make room for winter jackets or sweaters. Existing swing away o

Ne-At Ya (Yet Another) Tray Mounting Bracket

The NE-AT YA (Yet Another)Tray Mounting Bracket is lapboard mounting hardware designed for use with wheelchairs. The YA Bracket converts most commercial trays (Pin Dot, XL, Avanti, Invacare, etc.) from the existing slide-on or clamp style armrest mounting to a four bar linkage type clamp. This type of mounting can extend the life of the existing armrest pads, provide a stronger hold, and accommodate different size wheelchairs.

Neasy Swing Away Aug Com Mounting System

The NEasy Aug Com Swing Away Mounting System is a wheelchair mounting kit for communicators or lapboard mounting hardware designed fo use by individuals who use wheelchairs. This compact, heavy-duty modular mounting system for small to large devices or trays can be released and swung away by the user with only one or two pounds of pressure. Each swing away joint automatically locks into position with a stainless steel, spring-loaded pin at 0 degrees, 90 degrees (optional), and 180 degrees (optio

Neater Eater Electric Version

The Neater Eater Electric Version is a powered feeder designed for use by individuals with severe physical disabilities which make self feeding difficult. The feeding arm can be programmed so the spoon scoops food from the plate and brings it to the user's mouth. The device can be set up for five different diners and the automatic cycle of the spoon can be controlled in four different ways: A single eating cycle has the spoon run once; a Go While Pressed cycle has the spoon move only when the s

Neater Eater Manual Version & Adapted Version

The Neater Eater Manual Version is a mechaincal feeder designed for use by individuals with severe physical disabilities which make self feeding difficult. The unit features adjustable springs that help the user to smoothly guide the spoon down into the plate and up to the mouth. Adjustable stops prevent the spoon from moving past the plate or too close to the user, and stop the spoon at the right height for the user's mouth. The plate is turned by the user. In the Adapted Version, an adjustabl

Neater Snacker

The Neater Snacker is designed to promote independence for those with cerebral palsy, multiple sclerosis, motor neuron disease, head injuries, spinal injuries, rheumatoid arthritis, muscular dystrophies, limb amputations, ataxia, strokes, and Parkinson’s disease, which impact upper extremity strength and coordination during meals. It is a device to support and position food for eating. The Neater Snacker is comprised of a long arm with fold away clamp to attach the device to table or other furn

Neck Saver, The

The Neck Saver is a shampoo basin designed for use with individuals with back and neck injuries. The device consists of a tray on a floor base that is positioned between the seated client and the sink when washing, rinsing, and/or coloring the hair to eliminate bending or stretching of the neck. Made of ABS plastic with an adjustable chrome pole and a cast iron base, the unit is designed to be easy to sanitize and folds for storage. WEIGHT: 12 pounds. COLOR: The tray is black.

Neighborlink Seniors Monitoring Package

The NeighborLink Seniors Monitoring Package is an emergency alert system designed for use by seniors and individuals with disabilities who are at risk for medical or personal emergencies. This system alerts the users' neighbors immediately in the even of an emergency. It is a stand-alone package that has a one time purchase price and no monthly fees. The system includes a personal panic button that sends a radio signal to neighbors' homes within 200 feet; an alarm unit for a nearby neighbor; a s

Neon Floppy Bunny (Model 919N)

The Neon Floppy Bunny, model 919N, is a switch operated toy designed for use by children with upper extremity or severe physical disabilities or spinal cord injury. This plush toy has been adapted with a jack for a switch (not included), and when the switch is activated, the rabbit squeaks, hops, sits, moves his ears, and wiggles his nose. POWER: Uses two double-A batteries (not included). DIMENSIONS: 9 x 5 x 6 inches. COLOR: Neon pink with black ear tips and white muzzle.

Neuropedic Multi-Density Patented Mattress

The Neuropedic Multi-Density Patented Mattress is a hospital mattress designed for a standard hospital bed. This antibacterial and anti-decubitus bed pad is for persons requiring orthopedic support and/or pressure sore prevention. The mattress comes standard with a waterproof cover. OPTIONS: Safety border and handles. DIMENSIONS: All sizes are 35 inches wide x 6 inches thick; lengths available in 77, 80, and 84 inches. Custom sizes are available.

New & Improved Drum

The New and Improved Drum is a switch operated toy designed for use by children with severe physical or upper extremity disabilities. The user can press the yellow switch attached at the base of the drum or activate a capability switch (not included) to make the drum stick twirl and beat a fast, rhythmic drum roll. POWER: Uses two C batteries. DIMENSIONS (HxLxW): 11 x 11 x 10.5 inches. COLOR: The base is red; the switch and drum stick are yellow.

New Heights Electric Elevating Power Wheelchair (Models 08 02 02A-C)

The New Heights Electric Elevating Power Wheelchair, models 08 02 02A-C, is a powered elevating wheelchair designed for use by individuals with lower extremity amputations, lower extremity, mobility, and severe physical disabilities, and spinal cord injury. The wheelchair is designed as a general purpose utility wheelchair with the ability to temporarily elevate the seat from standard seated height to a height greater than that of a person standing. FRAME (HxLxW): 51 x 33 x 24 inches. CONTROLS

New Life Mattress

The New Life Mattress is a pressure relief foam mattress designed for use by individuals at risk for pressure sores or ulcers. The two-layer foam mattress is covered with waterproof and vapor proof fabric with a firmer inner cavity that provides support to the shoulder and heel area. The mattress also features side handles and supportive edges that aid in transferring in and out of bed. The handles are positioned with reinforced stitching to the underside of the mattress to prevent accidental he

New Yorker

The New Yorker is a stylus for tablet computer or touch screen designed for use by individuals with grasping, fine motor, neurological, severe physical or upper extremity disabilities or spinal cord injury. The tip of the stylus requires no downward pressure on the touch screen. This telescoping stylus can be adjusted to shorter or longer lengths for use with hand held devices such as a cell phone, personal digital assistant (PDA), global positioning system (GPS) unit, iPad, or iTouch. DIMENSION

Newspaper Holder (Model 73210)

The Newspaper Holder, model 73210-0000, is designed for holding a newspaper open for hands-free reading. The holder can be used on a bed or wheelchair tray. A center clip holds the top of the paper while flat strips support the edges for full open display. The bottom of the holder has an integral formed spring clip for table mounting. DIMENSIONS: 28 inches long overall. WEIGHT: 1.5 pounds.

Newspaper Holder.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Hold an open newspaper in reading position. Suggests that a large cardboard box trimmed to fit in front of the individual, whether sitting or lying down, will hold an open newspaper in reading position with the help of a few thumb tacks; adds that tacks with plastic heads are easier to handle. SKILLS REQUIRED: Cutting. AUTHOR: Hamilton, L. TITLE: Why Didn't Somebody Tell Me About These Things? REF:Book: Author, 217 North Jeffreys St, Pleasant Hills, MO

Nexgen Encased Linear Switch

The nexGen Encased Linear Switch is a touch switch designed for use by individuals with severe physical, neurological, or upper extremity disabilities or spinal cord injury. This momentary-contact, press-at-any-point linear switch is encased in a rugged Lexan housing to withstand being kicked, hit, or kneed to operate. DIMENSIONS: Available in standard lengths up to 72 inches. OPTIONS: Custom color, graphics, and labels. COLOR: The housing is clear.

Ni Hao Kai Lan (Model 1434A)

Ni Hao Kai Lan, model 1434A, is a switch operated toy designed for use by children with fine motor, upper extremity or severe physical disabilities or spinal cord injury. Once the capability switch (not included) is activated or a squeeze is given to Kai Lan’s left hand this toy doll will rock her head back and forth and her heart will visibly change colors as she thinks about what emotion she is feeling. This interactive doll will play out one of six different emotions to include giggly, sad, h

Nickle/mercury Head Control Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Mercury switch activates device when it is held upright and turns it off when tilted sideways or down. Can be used to encourage a child to hold head up in order to activate a tape recorder, toy, or light. Switch is contructed of glass mercury switch, small plastic pill bottle with snap lid, earphone with subminiature size plug, 2 small pieces of cardboard, tape, glue, and rosin core solder. SKILLS REQUIRED: Soldering. AUTHOR: Burkhart, L J TITLE: Homem

Night Call Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Switch suspended over the bed within easy reach to enable a severely disabled person to summon assistance. Extension of a call switch made with a plastic towel holder and cord. Includes drawing. COMMENTS: For information contact: Dr Elmer Hoyer, Cerebral Palsy Research Foundation of Kansas Rehabilitation Engineering Center, 2021 North Old Manor, Wichita, Kansas 67208. SKILLS REQUIRED: Electronics. Assembly. AUTHOR: Call, G; Hoyer, E TITLE: Problem Solv

Nightgown - Flannel (Model 19-2)

The Nightgown - Flannel, model 19-2, is a women's nightgown designed for use by those with physical disabilities. This long-sleeved gown is of soft flannel material. SIZES: Basic sizes include small, medium, large, and extra large. Larger sizes include extra extra large, and extra extra extra large. COLOR: Assorted colors in solids and prints.

Nightgown, Polyester & Cotton Blend (Model 19-01)

The Nightgown, Polyester & Cotton Blend, model 19-01 is a women's night gown designed for use by women with physical disabilities. This short- sleeved, over-the-head, waltz-length gown is available with or without a collar. SIZES: Basic sizes include small, medium, large, and extra large. Larger sizes include extra extra large, and extra extra extra large.

No Noise Switch (Model 3Nssw)

The No Noise Switch, model 3NSSW, is a control switch interface unit designed for use with individuals with emotional or cognitive disabilities. This switch activates the connected toy or appliance as a reward for quiet, encouraging those who shout or scream to modify behavior. This unit includes a microphone and a sensitivity control.

No Slip Ice Carpet

The No Slip Ice Carpet is an ice mat designed to protect people with mobility disabilities from slipping when walking on ice or snow. The No Slip Ice Carpet is made from natural sisal fibers treated with latex rubber, which adheres firmly to the moisture in ice and snow. The Ice Carpet rolls up for storage and unrolls into a runner-style carpet for use on steps, ramps, or flat surfaces, without shoveling, sanding or spreading chemical melts. DIMENSIONS (L x W): 10 feet x 18 inches or 10 feet x 3

No-Rinse Bathing Wipes

No-Rinse Bathing Wipes are disposable washcloths designed for use in bed baths. Each pack includes eight premoistened aloe and lanolin enriched cloths for one complete bath. The cloths provide cleansing, deodorizing, and moisturizing. Packs are microwaveable for a warm bath.

No-Rinse Body Wash

No-Rinse Body Wash is a no rinse soap for bathing people with mobility and severe physical disabilities, spinal cord injury or others who are unable to bathe themselves. This alcohol-free, which has an odor eliminator and moisturizer, is mild enough to use on the perineal region of the body. The solution applied with washcloth, then toweled dry. Available in 2 and 8 ounce containers.

No-Rinse Conditioner

No-Rinse Conditioner is a no rinse hair conditioner for people with mobility and severe physical disabilities, spinal cord injury or others who are unable to bathe themselves. The conditioner is alcohol-free and helps eliminate tangles. It is applied after shampoo, massaged into the hair, then the hair is toweled dry. Available in 2 and 8 ounce container sizes.

No-Rinse Shampoo Cap

The No-Rinse Shampoo Cap is a shampoo aid designed for people with upper extremity or severe physical disabilities and people who are not able to wash their hair. After a no rinse shampoo is administered to a person's hair, the No-Rinse Shampoo Cap is placed on the head over all of the hair. The shampoo is then massaged into the hair and scalp through the cap. This latex-free, alcohol free cap can also be used with conditioner. The cap can be warmed in a microwave oven before use.

Normally Open Sensing Cells (Model No-1)

The Normally Open Sensing Cells, models NO-1 is a low-profile, sealed sensing switches in wafer form. It feature 2.5 pounds nominal sensitivity with positive bottoming to withstand continuous body weight, and a water resistant sealed casing. This switch can be mounted using Mastic cement, epoxy, DA-12 tape, or the optional metal holder. OPTIONS: Metal holder. DIMENSIONS: 1.5 inch in diameter. COLOR: Black.

Nosey Glass (Model 16002)

The Nosey Glass is a nose cutout glass designed for use by individuals with severe physical disabilities, neurological disabilities, spinal cord injury or stroke. Made of translucent plastic, this glass holds eight ounces and has a textured grip surface and a cut-out section for the nose area to allow the user to drink without having to tilt the head.

Notesai

The Notesai is a modified keyboard designed for use by people with upper extremity disabilities, neurological disabilities, cerebral palsy, Parkinson’s disease, or spastic quadriplegia. Based on the Lomak keyboard (see separate entry), the Notesai is designed especially for people with head control. The keys are arranged in three circles with each key equidistant from the confirm key; however, in comparison to the Lomak the alphabetical keys are spaced further apart to accommodate tremors and in

Number-One Urinal

The Number-One is a male urinal designed to be used by individuals with severe physical disabilities. The Spill-Guard does not have to be held in place. It is designed to not slip, spill, or tip over. The urine can be measured in cubic centimeters and ounces using a graduate scale on the side of the Number-One Urinal.

Nursery Rhyme Caterpillar (Model 1203)

The Nursery Rhyme Caterpillar, model 1203, is a switch-activated toy designed for use by children with upper extremity, cognitive, or severe physical disabilities. Activate each of the built-in tactile switches to listen to the pre-recorded nursery rhymes recited by children while bright multi-colored lights twinkle along. Nursery rhymes include Mary Had a Little Lamb, Jack and Jill, Humpty Dumpy, and Little Miss Muffet. The unit can be used on a tabletop or it can be wall mounted. POWER: Uses 4

Nutron R5I Power Wheelchair

The Nutron R5I Power Wheelchair is a powered wheelchair designed for use by individuals with severe physical disabilities. FRAME: Wet black oversized, high-strength tubular frame reinforced crossbrace frame folds to 13 inches for transport. . CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. Seat widths range from 14 to 20 inches and the depths range from 16 to 18 inches. The back height ranges from 16 to 19 inches. The

Nutron R5Ilx Power Wheelchair

The Nutron R5ILX Power Wheelchair is a powered wheelchair designed for use by individuals with severe physical disabilities. FRAME: Oversized, high-strength tubular frame with a reinforced crossbrace design that folds to 13 inches for transport. The chair is available in five colors. CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. Seat widths range from 14 inches to 20 inches and seat depths range from 16 inches to 18

Nutron R5Ilxp Power Wheelchair

The Nutron R5ILXP Power Wheelchair is a powered wheelcdhair designed for use by individuals with severe physical disabilities. FRAME: Oversize, high-strength tubular frame with reinforced crossbrace design that folds to 13 inches for transport. The nchair is available in five colors. CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. The seat width ranges from 14 to 20 inches and the depths range from 16 to 18 inches. T

Nylon Back Pack (Model 16C005)

The Nylon Back Pack, model 16C005, is a wheelchair back pouch designed for use by individuals who use wheelchairs. Made of heavy- weight cordura nylon, this pouch carries small items and features nylon straps for hanging over wheelchair handles, two outside pockets, and Velcro closure flaps. DIMENSIONS: (HxW): 15 x 14 inches.

Object Display Switch

"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals who cannot successfully comprehend and/or use augmentative displays for communication to communicate. With the use of this switch display, a user receives auditory reinforcement, while alerting another person to the attempt to communicate. The adaptation is an object display box with a switch under its cover. The box mounts to a wall with industrial Velcro. The device is then connected to a Switch Module. The Switch Module is a self-cont

Objects In Container Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Switch which will turn on a tape player, battery toy or light when the child drops something into a container. Switch made from a metal cookie or candy tin a 3/4 inch copper U-bracket, 4 3/8 inch, 6-32 bolts with nuts, corregated cardboard and foam rubber. Provides instructions, diagrams and photograph. Suggests uses. SKILLS REQUIRED: Electronics. Soldering. Assembly. AUTHOR: Burkhart, L J TITLE: More Homemade Battery Devices for Severely Handicapped C

Occipital "t" Bar (Model 1670)

The Occipital "T" Bar, model 1670, is a neck support designed for head, neck, trunk, and shoulder support for individuals with spinal cord injury or severe physical disabilities during wheelchair use. The bar is made of high strength aluminum alloy, padded with high resiliance foam tubing, and covered with a Lycra slip cover. The unit includes two quarter-inch-20 x 0.5 inch SHHD screws for attaching to the "T" Tube-Plate weldment. DIMENSIONS: The foam 1.5 inches in diameter. The bar is 6 3/8 inc

Occipital Angle Bar (Models 1681 & 1683)

The Occipital Angle Bar is a neck support designed to provide head, neck, trunk, and shoulder support for individuals with severe physical disabilities or spinal cord injury during wheelchair use. The bar is made of high strength aluminum alloy padded with high resiliant foam tubing and covered with a Lycra slip cover. The bars are U shaped with a 30-degree angle at the bends. The unit includes two quarter-inch 20 x 0.5 inch SHHD screws for attaching to the Swivel Tube or "T" Tube-Plate weldment

Occipital Ring With Hinge Bracket (Models 1456, 1455, 1467, & 1468)

The Occipital Rings are neck supports designed for head, neck, trunk, and shoulder support during wheelchair use. The ring is made of high-strength aluminum alloy and covered with high density tubular foam and a Lycra form-fitting slip cover. The hinge bracket at the back of the ring is designed to interface with the swivel tube hardware for use on a wheelchair. SIZES: Available in small child, large child, small adult and large adult. DIMENSIONS: The width between the support tubes is 3.5 inche

Ocean Wonders Projector (Model 339X)

The Ocean Wonders Projector, model 339X, is a switch operated toy designed for use by children with upper extremity, severe physical, cognitive or emotional disabilities. Hold down a connected capability switch and one of two colorful ocean scenes will project on a wall or ceiling while soothing classical music plays. Music can also be played for a preset twelve minutes without the capability switch. The unit is equipped with a carrying handle. POWER: Uses 4 double-A batteries. DIMENSIONS (LxWxH

Octopus Bubble Blower

The Octopus Bubble Blower is a switch activated toy designed for use by children with upper extremity or severe physical disabilities or spinal cord injury, and others who cannot hold a standard bubble wand. This toy has been adapted with a jack for a capability switch (not included). The octopus is mounted on a plastic base with reservoirs for bubble solution with a blower unit inside. When the switch is activated, the octopus bobbles and wiggles its head while its eight rotating tentacle wands

Odyssey 700 Series

The Odyssey 700 Series are manual wheelchairs designed for use by individuals with mobility disabilities. FRAME: Hammer tone grey finish which resists chips and scratches. Anti-tips are available. SEAT: The seat width is 16 inches on models 706 and 716 and 18 inches on models 708, 718, 728, 738, 745, and 747. All models have a seat depth of 16 inches. Models 745 and 747 are hemi-height chairs with a height of 17 and 18 inches respectively. Other models have a seat height of 19 inches. A seat be

Officemate

OfficeMate is a switch adapted Bluetooth device designed for use by individuals with upper extremity, fine motor, or severe physical disabilities. This device is a switch adapted multipoint Bluetooth headset that allows the user to switch between cell phone and computer use with a single headset. The unit is adapted with a 1/8-inch audio mono jack on a wire lead for use with standard ability switch or wheelchair ECU port. DIMENSIONS: The wire lead is 12 inches long.

Offset Multi-Axis Headrest Hardware

The Offset Multi-Access Headrest Hardware is a headrest accessory designed for use by individuals with severe physical disabilities and spinal cord injury. This hardware comes with a horizontal bar and ring for attaching a headrest pad. Our headrest hardware also comes with a back clamp which attaches the vertical tube to the back of the chair. COLOR: Black chrome.

Oliver Kitty (Model 931)

Oliver Kitty, model 931, is a switch-operated toy designed for use by children with upper extremity, mobility, or severe physical disabilities or spinal cord injury. When an attached capability switch (not included) is activated, this kitty walks forward and backward and wags its tail. POWER: Uses 3 double-A batteries. DIMENSIONS (LxWxH): 7.5 x 4 x 7 inches.

Omnitilt Seat Motor Controller

The Omnitilt Seat Motor Controller is a pneumatic switch designed for use by individuals who use wheelchairs and are at risk of pressure sores. This device automatically changes seat positions every set interval to relieve pressure. It automatically levels the chair seat by changes in terrain, and can also be set to manual mode so the user can set permanent seat positions.

On / Off Remote Switch

On/Off Remote Switch is a system consisting of a small hand-held transmitter unit with a button on top and a receiver unit that plugs into a wall outlet. The appliance to be controlled is plugged into the receiver, and the user can turn it on and off at a distance of up to 50 feet by pressing the button on the transmitter unit. Three different frequencies of receivers with corresponding transmitters are available: a lamp model (750 watts max.), an appliance model (1800 watts max.), and a motor a

On / Off Switch (Model 3Tonf)

The On/Off Switch model 3TONF, is a touch switch designed for use by individuals with severe physical or upper extremity disabilities. This large surface switch consists of two plates; tapping the left one turns the connected toy or appliance on and tapping the right one turns the item off. COLOR: The "on" side of the switch is green and the "off" side is red.

One Monitor (Model One-1711 Tspc)

One Monitor, model one-1711 TSPC, is a computer with touch screen designed for use by individuals with cognitive or upper extremity disabilities. This Windows-based all-in-one unit incorporates a slot-loading optical drive, hard disk, card reader, speakers, and the direct current (DC) power supply within a five-wire resistive touch screen monitor. Features include a duel core 1.8 GigaHertz (GHz) processor, a 160 gigabyte (GB) hard drive, 2 GB DDR memory, up to 6 USB 2.0 ports, a slim CDRW/DVDROM

One Recorder With Dividers (Model 1444)

The One Message Recorder with Dividers, model 1444, is a voice output rocker switch designed for use by individuals with upper extremity or communication disabilities. This two-part switch enables messages to be recorded by pressing one side of the switch and played by pressing the other side. Interchangeable center dividers allow a therapist to choose a suitable barrier to physically separate message and record plate. POWER: Uses four double-A batteries (not included). DIMENSIONS (HxLxW): 2.5 x

One-Piece Modular Access Ramp

The One-Piece Modular Access Ramp is a modular ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp is pre-fabricated in one-piece and made of steel with slip-resistant, pressure-treated wood decking. The ramp is painted with high-quality industrial enamel. OPTIONS: Powder-coat finish. DIMENSIONS: Standard ramps are available in 6-, 12-, 18-, 24- or 30-foot lengths with a 5 x 5 foot landing at the door. Standard slope is 1:12. CAPACITY: 1,000 pounds.

One-Way Drinking Straws (Model Ha-4266)

One-Way Drinking Straws, model HA-4266, are drinking straws with valves designed for use by individuals with swallowing disabilities. These straws have one-way valves which stay filled with fluid even after the straw is removed from the user's lips. The valves reduce the effort required to drink and the amount of air ingested. The straws have adjustable clips to secure the straw on cups or glasses. DIMENSIONS: Each package contains one 10-inch and one 7-inch straw. WEIGHT: 9 grams.

One-Way Straw

The One-Way Straw is a drinking straw with valve designed for use by children and adults with drinking and swallowing disabilities. These straws feature a valve that prevents liquid from flowing back down the straw once the lips are removed; it also prevents sucking air through an empty straw. The set includes two straws and clips to secure the straw to the glass. DIMENSIONS: One 10-inch and one 7-inch straw.

Optical Head Mouse Kit

The Optical Head Mouse Kit is a communication device accessory designed for use by individuals with communication or speech disabilities and upper extremity, severe physical or neurological disabilities. This unit provides access to the communicator when finger touch access or use of other hand controls is not an option. A small reflective dot is placed somewhere on the front of the user's head (typically the forehead) and the Optical Head Mouse tracks the dot movements. Any movement of the dot

Optima 2G

Optima 2G is a powered seating system designed for use by individuals with neurological or severe physical disabilities. Tilt-in-space and reclining systems are available and can be mounted on a power base (not included) from Invacare, Pride Mobility, Sunrise Medical, Leisure Lift, TracAbout, Wheelchairs of Kansas, or others. CONTROLS: Attendant controls are standard, with independent toggle switch and joystick interface controls for power base and seating system functions. Alternative input dev

Optimax

OptimaX is a bariatric seating system designed for use by individuals with neurological or severe physical disabilities. This system can be expanded in three dimensions and is available in tilt-only, recline-only, and tilt/recline configurations. FRAME (HxLxW): Back height plus 12 x seat length plus 20 x seat width plus 6 inches (tilt-only) or seat width plus 8 inches (recline only and tilt/recline). The frame has powder-coated black wrinkle finish. CONTROLS: Single post 4-position toggle switch

Oral Motor Kit (Model 1145)

The Oral Motor Kit, model 1145, is a respiratory training activity designed to provide tactile, proprioceptive, visual, and auditory feedback for children and adults with severe physical, speech, or neurological disabilities. This all-inclusive kit include items to provide oral stimulation, help to strengthen the muscles in the mouth and face, and/or make feeding easier. The kit includes: Set of six whistles, vibrating teether, Tri Chew, Tuffy Chew, scooper plate, set of five Easy Spoons, a two-

Orion Ii

The Orion II is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. FRAME (LxWxH): 34.5 x 27.5 x 44 inches. The seat-to-floor height ranges from 13.25 to 20 inches, depending on the choice of wheels and casters. The frame is equipped with a low or high push bar and cane-style push handles. A multi-adjustable axle plate is standard. Rear anti-tips are optional. The frame is av

Otodor Swing Door Opener (Models Dm-50, Dm-100, And Dm-150)

The Otodor Swing Door Opener is a powered door opener designed for use by individuals with mobility, neurological, or upper extremity disabilities. Designed for non-professional installation (with the exception of the electric strike plate), this opener can be used on residential, office, or public restroom swinging doors weighing up to 100 pounds. Model DM-50 remotely opens and closes most interior swing doors. The kit includes the door opener main unit and remote control. Model DM-100 opens an

Otter Bath Seat (Models Ot 1000, Ot 2000, & Ot 3000)

The Otter Bath Seat is a child's bath seat designed for use by children with severe physical, neurological, balance, or mobility disabilities or spinal cord injury. This seat fits all standard tubs, has a folding plastic frame and is upholstered with removable, machine-washable mesh fabric, and includes two adjustable positioning belts and width- and height-adjustable head cushions. Leg straps control abduction and adduction. The seat and back are angle-adjustable and have five angle adjustments

Otto-Bock Changing Table

The Otto-Bock Changing Table is a wall mounted changing table designed for use with children with mobility or severe physical disabilities. The frame of this stretcher-style changing table is covered with HT material. It mounts to the wall and is supported by two self-locking legs. The unit folds up or down against the wall when not in use, and a wall clamp is included to secure it when folded up against the wall. COLOR: The frame is dark brown, and the table is white.

Outback

The Outback is a child's manual tilt-in-space wheelchair designed for use by children with mobility or severe physical disabilities. FRAME: Adjustable tilt-in-space frame with built-in growth capability. A one-piece, height-adjustable stroller handle and anti-tippers are included. The frame width adjusts from 11.5 to 15.75 inches and the base length is adjustable. The frame is available in Uluru red, Daintree green, or clear blue. SEAT: The seat depth ranges from 5.9 to 20 inches. The seat heigh

Outdoor Play Activity Center

PROTOTYPE --- PURPOSE: To design a sensory-stimulating outdoor play activity center for children with limited physical and cognitive abilities. The prototype frame structure consists of five activity stations and nine different activities. The frame structure is weatherproof, height-adjustable, and can be easily dismantled for storage. Activities are designed to stimulate the visual, auditory, and tactile senses. Components are interchangeable and removable for cleaning or storage. The frame is

Outta Bed

Outta Bed is a bed mobility aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. This device can be positioned for right- or left-side use and mounts primarily to the bed frame of a standard home flat bed as well as to the floor and wall for added stability. This device can be used to assist in transfers to and from bed and to and from a wa

Oval Hip Pad Kit - As4000 & As5000 (Models 4331-01, -21, -31, -32, -33, 4333-01, -21, -31, -32, & -33)

The Hip Pad Kit is designed for hip positioning of individuals seated in wheelchairs, but will adapt to heavier positioning applications. Made of 16 gauge, cold, rolled steel that has been deburred for a smooth finish and plated to prevent corrosion. The plate is formed with a recess for two rows of ##10-32 press nuts and redius corners. The kit consists of one complete pad and all the hardware necessary to mount the pad to the wheelchair seat. OPTIONS: Available in metal only or with cover of t

Oval Hip Pad Kit As4000 & As5000 (Models 4370-31, -32, -33, 4372-31, -32, & -33)

The Oval Hip Pad Kit is a lateral hip guide designed for positioning the hips of an individual with spinal cord injury or severe physical disabilities while in a wheelchair. The pads are designed with internal threads for mounting support brackets which attach to the seat bottom. Adjustments for the hip pads can be made front to back, in and out, or up and down. The pads are constructed of steel padded with 1.25-inch closed cell foam and completely covered with a Rubatex slip cover. A kit conta

Oval Texture Switch (Models 711-S, 711-M, & 711-X)

The Oval Texture Switch, models 711-S, 711-M, and 711-X, are touch switches designed for use by children with physical or neurological disabilities. Available in two sizes, the switch's bumpy surface invites touch and switch activation. Model 711-X comes with a connector box that allows the switch to operate in momentary, timed, or latch modes. In momentary mode, the toy or device stays on as long as the user maintains pressure on the switch. In latch mode, the toy or device turns on when the sw

Oval Texture Switch With Battery Interrupter (Model 711-I)

The Oval Texture Switch with Battery Interrupter, model 711-I, is a switch adapter and touch switch designed for use by individuals with severe physical or upper extremity disabilities. Two battery interrupters (C, D and double-A) are permanently attached to a medium size Oval Texture Switch (see separate entry). The oval-shaped switch is brightly colored and textured. Slip the thin disk into a battery-operated toy or device and it becomes switch adapted. DIMENSIONS: 9 inch diameter.

Over-Bed Computer Work Station

CUSTOM ADAPTATION PURPOSE: To enable an individual with quadriplegia to work from bed or from a wheelchair. This unit consists of a two-layer table on metal legs equipped with casters for mobility. The table is at the appropriate height to enable it to be wheeled over the user's bed. The upper layer or section of the table can be rotated similarly to a lazy susan, while the lower section is fixed. Under the lower section is a small motor with a shaft which rotates the upper layer on rollers bet

Overbed Table Mount

The Overbed Table Mount is an overbed table designed to provide accessibility to a communication device for individuals with severe physical disabilities while in bed, a geri chair, or wheelchair. The mount's table can be adjusted vertically by depressing a small hand actuator and allowing the spring assisted mechanism to lift the entire table surface to the desired level. The ComLink communicator attaches to the table using a U-tube that is sized with a diameter identical to other FRS mount sys

Pacesaver Scout Boss 6 & 6.75

The PaceSaver Scout BOSS 6 and 6.75 are heavy-duty powered wheelchairs designed for indoor and outdoor use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 48 x 28. x 42 to 44 inches. The turning radius is 27 inches, and the ground clearance is 3 inches. These chairs disassemble for transport. Both chairs feature a heavy-duty steel frame with independent coil-spring suspension and includes height-adjustable, rigid front anti-tippe

Pacesaver Scout Boss 6Ns

The PaceSaver Scout BOSS 6NS is a heavy-duty powered wheelchair designed for indoor and outdoor use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 48 x 28.5 x 42 to 44 inches. The turning radius is 27 inches, and the ground clearance is 3 inches. The chair disassembles for transport. This chair features a heavy-duty steel frame with independent coil-spring suspension and includes height-adjustable, rigid front anti-tippers; Stan

Pad Mounts For Sensors (Models Sm-Sp, Sm-Mp, & Sm-Lp)

Mounts for Sensor Pads are switch mounting hardware designed for use by individuals with severe physical disabilities or spinal cord injury. These pad can be used to mount non-adjustable sensors (sold separately) and maintain a range of touch to 0.25-inch above the surface. SIZES: Spot, medium, and long. DIMENSIONS(WxL): The spot pad is 2 x 2 inches, the medium pad is 2 x 4 inches, and the long pad is 2 x 6 inches.

Padded Half Lap Tray, Left (Model 16C012-2L) & Padded Half Lap Tray, Right (Model 16C012-2R)

The Padded Half Lap Tray is a lap tray designed for use by individuals who use wheelchairs. This tray has the epoxy-coated-steel slide-on mounting bracket. The hinged system allows for complete folding of the tray section thus leveling it with the side of the wheelchair. No tools are required for attachment. The tray section is padded with poly foam and covered with vinyl. Model 16C012-1L is designed for left-handed use and model 16C012-1R is designed for right-handed use. DIMEMSIONS: (WxL) 1

Padded Transfer Bench With Back (Model 9080)

The Padded Transfer Bench with Back, model 9080, is designed for use by individuals with mobility disabilities, balance, and cognitive disabilities who have difficulty standing in a tub or shower. The bench extends over the side of the tub, allowing the individual to sit and slide into the tub without having to step over the tub side. The bath bench has an anodized aluminum frame with a padded seat and back. It adjusts to left- or righ-side tub entry placing the back on either side. The bench is

Paddy The Frog (Model 9308)

Paddy the Frog, model 9308, is a switch operated toy designed for use by children with upper extremity, mobility, or severe physical disabilities or spinal cord injury. This toy frog comes with an umbrella attached to its hand. When the child activates a capability switch (not included), this frog twirls its umbrella and taps its foot while singing “Singing in the Rain.” Paddy the Frog also works without a switch. POWER: Uses 3 AA batteries. DIMENSION (HxDxW): 10 x 5 x 8 inches. WEIGHT: 1.5 poun

Page Restrainer.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Devices to clamp on either side of an open book to hold it open. Describes construction of a page holder made of a paper clamp, wire from a coathanger, a 1/4 inch nut and bolt, and a rubber band. Includes drawings and photograph. SKILLS REQUIRED: Woodworking. AUTHOR: Grainger, S E TITLE: Making Aids for Disabled Living REF: North Pomfret, Vermont: Batsford: p 21-23 NARIC CALL NUMBER: R1126 PAGES (including cover): 4 1981.

Pagebot For Kindle Keyboard

The PageBot for Kindle Keyboard is a control switch interface for the Amazon Kindle electronic book reader, designed for use by individuals with neurological disabilities, spinal cord injury, amyotrophic lateral sclerosis (ALS), cerebral palsy, muscular dystrophy, spinal muscular atrophy, multiple sclerosis, stroke, arthritis, or repetitive strain injury. This switch interface works with all models of Amazon’s 3rd Generation Kindle, including the international wireless, WiFi, and Special Offer m

Pain Chip

---- PROTOTYPE --------- PURPOSE: To design a prototype of an implantable chip capable of canceling the pain signals sent from the spine to the brain for individuals with spinal cord injury and/or chronic pain. Researchers from Australia have created a chip designed for individuals who suffer from chronic pain. The chip will be inserted into the body, along with a biocompatible device, and the two devices will be sewn into a 1.22-millimeter wide polymer yarn that is merged with electronic wires.

Pal Swing-Away Lateral Support

PAL (Positive Action Lateral) Swing-Away Lateral Support is a lateral trunk support designed for use by individuals with balance disabilities, severe physical disabilities, or spinal cord injury who use wheelchairs. The pad angle of this lateral thoracic support can be rotated plus or minus 10 degrees. It is designed to fit the Evolution Back from Varilite (see separate entry). The pad has a steel base encased in multi-stiffness closed-cell foam with a washable cover, and is available in curved

Palmar T Bar Splint

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Customized T Bar for joystick control. A standard T bar joystick control is difficult for some people to use because their hand keeps slipping off the bar. Thermoplastic splinting materials can be used to mold a support which is attached to the top of the commercially purchased T bar. A palmar arch can be molded in and an ulnar piece for lateral support. It can be attached at an angle if required for better control. Includes drawing. SKILLS REQUIRED: T

Panda Peek-A-Boo Switch (Model 7023)

The Panda Peek-A-Boo Switch is a touch switch designed for use by children with fine motor, grasping, or upper extremity disabilities. Intended to encourage children to increase pincher grasp use, this switch activates a connected toy when the user flips open the panda's paws. This switch has suction cups for attaching to any smooth surface. DIMENSIONS(HxWxD): 3 x 7 x 5 inches.

Panda Switch (Model 9032)

The Panda Switch, model 9032, is a touch switch designed for use by children with severe physical or upper extremity disabilities or spinal cord injury. The switch is designed to fit a child’s hand and pessing on either of the panda’s ears will activate a connected device. DIMENSIONS(LxW): 3.5 x 2 inches.

Papooswitch

The PapooSwitch is a touch switch and buttonswitch designed for use by individuals with fine motor and upper extremity disabilities. This switch connects to a computer or other switch-adapted devices using a 3.5 millimeter (mm) jack (PapooSwitch A) or a USB connection (PapooSwitch B). It has a triangular base with a round button in the center. The PapooSwitch offers four features that can be turned on or off as needed: left or right click; back lighting of the round button; a beep that sounds w

Papootouch+

The PapooTouch+ is a handheld direct selection, scanning and symbolic communicator designed for use with one or two switches (not included). The PapooTouch Plus is intended for use by people with communication and speech disabilities who also have fine motor, neurological, upper extremity or severe physical disabilities or other conditions, such as cerebral palsy, brain injury, stroke or multiple sclerosis, that may affect one's ability to hold the device and operate its touch screen. This commu

Paraplis Umbrella Holder

The Paraplis Umbrella Holder is an umbrella holder for wheelchair or stroller designed for use by individuals with mobility disabilities or spinal cord injury. The unit attaches to stroller or wheelchair to hold an umbrella to protect both the seated user and an individual pushing the chair or stroller. When in use, it swings up to hold an open umbrella. When not in use, it swings down to carry the closed umbrella at the side of the stroller or chair. The device attaches to any shape bar or tube

Parrott Jamaica Nx Headset

The Parrott Jamaica NX headset is a voice input computer terminal control interface designed for use by individuals who are blind or have low vision or upper extremity or severe physical disabilities. This monaural headset has a USB pod connection (one way USB, microphone only), and can be used for speech recognition, voice command and control, and voice recordings. It includes a noise-cancelling microphone, Translator software from VXI to enhance microphone performance, and a left- or right-si

Parrott Talkpro Ct1

The Parrott TalkPro CT1 is a voice input computer control interface and telephone headset designed for use by individuals who are blind or who have low vision or upper extremity or severe physical disabilities. This monoaural speech recognition headset includes a computer/telephone switchbox, a Gentex microphone, and a pendant with Quick Disconnect, and is designed for users of computer audio applications who also work on the phone. The user can switch the headset microphone between computer and

Parrott Talkpro Ct2

The Parrott TalkPro CT2 is a voice input computer terminal control interface and telephone headset designed for use by individuals who are blind or who have low vision or upper extremity or severe physical disabilities. This binaural headset comes with a Gentex microphone, a computer/telephony switchbox, and a pendant with Quick Disconnect, and is designed for users of computer audio applications who also work on the phone. The user can switch the headset microphone between computer and telephon

Parsons Slide Buddy (Model 14A089)

The Parsons Slide Buddy, model 14A089, is a dual-purpose transfer aid designed for use in positioning and transferring individuals with mobility disabilities. The waterproof nylon slide side has a non-slip base that aids a caregiver in positioning the person when entering or exiting an automobile. The reverse side features slippery nylon and six hand holds to aid in transferring from a bed or sofa. DIMENSIONS: (LxW): 30 x 35 inches.

Pass Panic Alarm Signaling Switch

The Pass Panic Alarm Signaling Switch is a call signal designed for use by seniors or individuals with neurological, mobility, or severe physical disabilities or spinal cord injury. This device is designed to be installed where people need to signal for help or assistance. It consists of a press-at-any-point switch strip that can be operated by the touch of a finger, hand, elbow or arm. This switch can be used in hospitals, residential care facilities or public buildings.

Patient Protector (Models 6010, 6011, 6012, & 6015)

The Patient Protector is a bib designed to be used to protect adults from unintentional spills. The terrycloth bibs are machine washable. DIMENSIONS: 18 x 27 inch terrycloth with tape ties (model 6010); 18 x 27 inch terrycloth with velcro closures (model 6011); 21 x 27 inch terrycloth with plasticized back, crumb catcher and tape ties (model 6012); 24 x 36 inch plastic reusable bib with tape ties.

Patient Sentinel (Model 3130)

A signaling device to call for attendant assistance. when activated it emits a pulsing electronic tone designed to be effective in moderately noisy envirnments. Three operating modes. In two of these modes the user turns the Sentinel both on and off. The third mode permits the user to turn the Sentinel on, but requires an attendant to turn it off. Powered by an internal 9 volt battery. A flashing light on front of unit indicates when battery needs replacement. May be operated by an independent s

Patient-Lift Floor Sling (Model 4000)

The Patient-lift Floor Sling, model 4000, is a transfer lift sling designed for use with individuals with balance, mobility, neurological, or severe physical disabilities. This sling is designed specifically to aid in transfers from the floor and allows for even weight distribution to alleviate pressure points. This sling is also useful for transfers from beds to gurneys. SIZES: Small, medium, large, or extra-large.

Patriot Portable Pro Pool Lift

The Patriot Portable Pro Pool Lift is a pool lift designed for use by individuals with spinal cord injury, mobility disabilities, or severe physical disabilities. This electrically powered pool lift is fully portable and can easily be removed from poolside when not in use. It does not intrude into the pool when not in use. This lift has a sliding mechanism that allows the lift to be transported easily on its included cart and then lowered onto the pool deck for use without fastening any hardware

Pediatric Commode

The Pediatric Commode is a child’s commode designed for use by children with physical disabilities. This height-adjustable commode features a solid plastic toilet seat, hook and chest strap, and adjustable arms. Other features include steel tubing and rubber-tipped legs. DIMENSIONS: The seat height adjusts from 11 to 14 inches. The overall seat width is 18 inches and the overall depth is 19 inches. The width between the arms is 14.5 to 30.5 inches. CAPACITY: 250 pounds. WEIGHT: 12 pounds. COLOR

Pediatric Suitcase Ramp (Models Ap 7055 & Ap 7056)

The Pediatric Suitcase Ramp is a portable ramp designed for use by children with mobility disabilities, neurological disabilities, severe physical disabilities, or spinal cord injury. This portable ramp accommodates pediatric scooters, walkers, and wheelchairs. The ramp is hinged and folds in half to be carried like a suitcase. Made of aluminum, the ramp has a durable, non-skid surfaceand a built-in carrying handle. CAPACITY: 600 pounds. DIMENSIONS (LxW): Model AP 7055 is 5 x 2 feet and model A

Penny & Giles Wireless Switch

The Penny & Giles Wireless Switch is a cordless remote control switch designed for use by individuals with sever physical disabilities, spinal cord injury, or upper extremity disabilities. This angled, adjustable pressure switch communicates with a receiver without wires or cables. It has 16 available channels to allow it to be used with multiple devices in one room. The receiver can be connected to a battery-operated toy or device, or to a computer switch interface. The switch also comes wi

Penny Pincher Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Penny pincher touch switch enables a child to activate a toy or light by pinching two pennies between thumb and forefinger, and is useful in developing pincher grasp and pointing skills. Child activates battery operated toy or other device by pinching two copper pennies; when pressure is released, the switch turns off. The switch is made by soldering a subminiature plug to two strips of 5 inch conductor wire, and soldering a copper penny to the other e

Penta Switch (Model 50240)

The Penta Switch is a multiple buttonswitch designed for use by individuals with upper extremity disabilities. Intended to control any device that requires five single switches for operation, the switch unit is basically a flattened joystick. The five switches are small button switches fitted in a disk-shaped housing; consequently, a small range of motion, a light touch, and good targeting ability are required for operation. The switches require 4.5 ounces of force and 0.03 inches of travel for

Perfoma Adjustable Group Therapy Table (Models A370-520, A370-522, A370-524, & A960-72)

The Citadel Adjustable Group Therapy Table is a manual height-adjustable therapy table designed for clinical use. These tables feature height adjustability using a fold-away hand crank, high-pressure laminate tops with radius edges to eliminate sharp edges, and extruded telescoping legs. OPTIONS: Comfort recess. DIMENSIONS: The height adjusts from 27 to 39 inches. The top on model A370-520 is 36x 72 inches. The top on model A370-522 is 30 x 60 inches. The top on model A370-524 is 36 x 48 inches.

Performa Adjustable Hand Therapy Table With Comfort Recess (Model A370527)

The Performa Adjustable Hand Therapy Table with Comfort Recess, model A37052 is a hand/wrist/forearm exercise table designed for clinical use. This center-pedestal table has an X-shaped base. Standard features include a comfort recess design for ergonomic positioning and internal gas spring assisted height adjustment. OPTIONS: Casters. DIMENSIONS: The top is 36 x 36 inches, the base is 30 x 30 inches, and the height adjusts from 24 and 36 inches.

Personal Alert Link (Pal)

Personal Alert Link (PAL) is an emergency alert system with monitoring service designed for use by individuals with balance, mobility, neurological, or severe physical disabilities. The system includes a base station and a waterproof pendant. The base station plugs into a power outlet and a telephone jack. In order to be activated, the system must be connected to the Emergency24 monitoring system. To request help, the user presses the button on a waterproof pendant to send a signal wirelessly to

Personal Catheter

The Personal Catheter is an internal catheter designed for intermittent use by individuals with urinary incontinence, severe physical disabilities, or spinal cord injury. This latex-free silicone catheter comes in four configurations (standard, antibacterial, hydrophilic, and antibacterial hydro) and in male, female, and pediatric lengths. The catheter has a firm silicone inner layer for ease of insertion and a soft silicone outer layer that is gentle on sensitive urethral tissue. The silicone p

Personal Tilt Desk

Personal Tilt Desk is designed for use by individuals using a wheelchair and those who need an adjustable desk. The Personal Tilt Desk is adjustable in height and also includes a cut out for additional stability. It is available in mobile or static versions. The Personal Tilt Desk top tilts to provide options for supporting and positioning objects in relation to the child.

Personal Work Table With Tilt Top (Model 76-31K)

The Personal Work Table with Tilt Top, model 76-31K, is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. The top tilts from 0 to 50 degrees and is equipped with a lip on the front edge to keep objects in place. The legs are adjustable with an indexing plunger. OPTION: 3.5-inch locking dual-wheel casters. DIMENSIONS (HxLxW): 23 to 33 x 36 x 30 inches.

Pete The Repeat Parrot (Model 436)

Pete the Repeat Parrot, model 436, is a toy designed for use by children with communication, developmental and speech disabilities. This colorful toy parrot helps children develop language and sound recognition. Pete the Repeat Parrot repeats anything said in its vicinity, and he moves his feathers and body when speaking. POWER: Uses 4 AA batteries (not included). DIMENSIONS (HxDxW): 11 x 4.5 x 8 inches; parrot is 8 inches tall.

Petite Pillow Switch (Model 831)

The Petite Pillow Switch, model 831, is a touch switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This switch is encased in foam and covered with a soft bag which can be removed and washed. Hook and loop tape can be sewn to the cover for special mounting situations. OPTIONS: A set of four covers with one of each color or pattern is available. COLOR: The cover is available in green or in floral, plaid, or safari patterns.

Pfd-A (Personal Flotation Device-Adapted)

PFD-A (Personal Flotation Device-Adapted) is a personal floatation device designed for children and adults with severe physical disabilities. This swimming aid maintains the user's body stretched out in a dorsal position, stabilizes the body in case of involuntary reflexes and uncontrollable movements, and helps keep the user's face completely out of the water. SIZES: Extra-small (fits individuals weighing 18 to 35 pounds), small (fits individuals weighing 30 to 45 pounds), medium (fits individ

Pharmacy Signs And Words

Pharmacy Signs and Words is a personal skills and independent living skills tutorial program designed for use with individuals with cognitive or developmental disabilities. Three general videos give step-by-step instructions on using a pharmacy, getting medications, and making payment. Also included in this 80 signs and words program are the following general categories: Terms(clerk, dose); symptoms This program teaches 80 signs and words program.(cold, chills, cut); health care (aspirin, cough

Phone Holder

CUSTOM ADAPTATION PURPOSE: To enable an individual with motor neuron disease to talk on the telephone in privacy. Because the individual no longer has use of his arms, the device needed to be adaptable to both a standard cordless phone and a cell phone. The holder is equipped with a gooseneck arm and clamps to the push handle of a wheelchair. Attached to the gooseneck arm is a plastic spring clamp with jaws lined with vinyl. A caregiver dials the number being called and places the phone in the

Phone Holster

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair to transport and keep within reach a cordless telephone. A holder was fashioned from plastic siding and shaped with a heat gun. The holder has side wings and a bottom support to hold the phone. A pine mounting block was shaped to receive the holster on one side and the tubular wheelchair frame on the other. Two screws fix the holder clip to the pine. Thin pine pieces are laminated on the edge of the block to prevent

Photocell Switch (Model 790, 790-8)

Photo Cell Switch, model 790 and 790-8, is a photoelectric switch designed to be activated by any body movement for individuals with physical diabilties. The switch is activated by interrupting a light beam and creating a shadow over the electronic photocell.

Physio-Roll

The Physio-Roll is a peanut-shaped inflatable roll designed to provide control and security for individuals with physical disabilities during balance activities. With a saddle-shaped middle, the roll cradles the user and the overall shape limits rotation to forward and backward. Used with or without a blanket, the roll can be used in squeeze play and tactile activities. DIMENSIONS: 12, 16, 22, 28, or 34 inches in diameter. CAPACITY: Up to 250 pounds depending on size. COLOR: Red, yellow, or blue

Piano Puppy (Model 5127)

The Piano Puppy, model 5127, is a switch operated toy designed for use by children with physical, sensory or cognitive disabilities. This bilingual adapted toy has a large smiling puppy face, is mounted in an accessible angled mold, and is equipped with four colored piano keys featuring numbers, animals, animal sounds, and parts of the face. When the capability switch is activated (not included) or the piano keys are pressed, this toy piano plays 12 different children’s songs in three modes. Gre

Picasso Series

The Picasso Series is a set of four cause and effect training program titles designed for use by children with cognitive or severe physical disabilities. Pressing a switch enables the user to draw and then color a picture while teaching switch use. The program enables the child to capture a paint pallette for each picture. COMPATIBILITY: For use on IBM and compatible comnputers or Macintosh computers. SYSTEM REQUIREMENTS: A Macintosh running MacOS 10.1 or newer, or a PC running Windows XP or new

Pick & Choose

Pick & Choose is a multi-purpose age appropriate software program modeled after soundboard story books. There are between 1 and 10 choice buttons with pictures or text that can be displayed on a game board at a time. A game can have up to 1,000 choice buttons associated with it. A choice button is pressed by using switches, a touch window, the computer keyboard, or a mouse click. When a choice button is pressed, a reward is presented as a reward picture, reward text, music file, sound effect

Picnic Tables (Wct8 Series)

Accessible picnic table. Tubular galvanized steel frame. Wooden or anodized aluminum top and seats. Tabletop extends out 12 inches on each end. DIMENSIONS: 8 feet x 4 feet 9 inches x 31 inches high. WEIGHT: 184 pounds.

Pictoshow

PictoShow is a communication book and medical information organizer designed for use by emergency responders and medical professionals. This software enables professionals to create pictogram pages regarding medical emergencies and accidents for communication with individuals who are deaf, non-verbal, or who have speech or cognitive or communication disabilities. Pages can be marked and later photocopied as a permanent record. When pages are laminated and bound with a plastic coil binding, they

Picture Frame Restoration Workstation

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with spinal cord injury or severe physical disabilities to restore picture frames without bending or lifting. The custom-designed workstation consists of a worktable that includes a separate revolving grid that provides an indexed tilting mechanism and 350-degree rotation. This provides the user full appropriate positioning of the frame without the need to bend over the table or lift. The table accommodates a standing worker and a height-adjust

Pilot One

The Pilot One is a voice controlled Environmental Control Unit (ECU) designed for use by individuals with limited mobility due to Multiple Sclerosis, Spinal Cord Injuries or Strokes. Pilot One controls any infrared (IR) device in the home or facility, including TV, cable, satellite, DVD, and new technology remotes such as Roku and Apple TV. Features include, pre-programmed menu structure, IR and X-10 interfaces, voice training with no computer required, graphic display, auditory and visual feedb

Pinch Switch (Model 800)

The Pinch Switch is a squeeze switch designed to teach prehension skills for individuals with physical disabilities. The switch is small enough to be held in a child's hand and is activated by the slightest pinching or pressure.

Pinky Piglet (Model 9200)

Pinky Piglet, model 9200, is a switch-operated toy designed for use by children with severe physical or upper extremity disabilities. This plush toy walks, wiggles its nose, and oinks when the capability switch (not included) is activated. This piglet also has a pink bow on its ear. POWER: Uses 2 AA batteries. DIMENSIONS (HxLxW): 4.5 x 7 x 3.5 inches.

Plantar Fasciitis Hot/cold Therapy Roller

The Plantar Fasciitis Hot/Cold Therapy Roller is a therapeutic hot/cold roller that massages and stretches the arch of the foot to reduce the pain of plantar fasciitis. This product has an hourglass shape, three convex surfaces that provide a firm grip, and a stable base to loosen the plantar fascia tissue. The device can be used at room temperature. The roller also can be warmed in water or chilled in the freezer. Clean its antimicrobial surface with soap and water.

Plastic Drinking Straws (Model 6049)

Plastic Drinking Straws, model 6049, are straws with a flexible neck which stays in place after bending. Each straw is individually wrapped and disposable.

Plastic Food Guard (Models 1476, 1477 & 1478)

The Plastic Food Guards are designed to assist people with upper extremity disabilities with keeping food on the plate and pushing food on to utensils. The lightweight, smooth plastic Guards hook on to the pate with hooks molded as part of the unit, creating no seams or joints. These Guards are dishwasher safe up to 125 degrees. DIMENSIONS: Fit plates 9.5 to 10 inches in diameter. COLOR: Model PC 1476 is red; model PC 1477 is blue; and model PC 1488 is white.

Plastic Notebook Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Very flat switch that can be activated by light pressure on most of its surface. Can be used to activate toy or cassette player. Instructions for building a switch using an inexpensive plastic notebook, 2 large foil cookie sheets, 1 subminiature size plug and 4 feet of 2 conductor 22 gauge stranded wire, plus tapes and soldering. Includes drawings and photographs. SKILLS REQUIRED: Soldering. Assembly. AUTHOR: Burkhart, L J TITLE: More Homemade Battery

Plastic Plate Guard (Model Ha-4250)

The Plastic Plate Guard, model HA-4250, is a food guard designed for use by individuals with use of one hand, stroke, or neurological disabilities or spinal cord injury. This removable plastic plate guard fits tightly around the rim of any circular plate 200 to 300 millimeters in diameter. The edge is curved to help keep food on the plate. DIMENSIONS (HxL): 42 x 150 millimeters. WEIGHT: 33 grams.

Plate Switch

The Plate Switch is a touch switch designed for use by individuals with upper extremity disabilities. This switch features a thin membrane and is activated with 1.8 ounces of pressure. A colored circle on the surface marks the pressure sensitive area. The surface is sealed to prevent moisture damage. This low-profile switch enables the finger to slide and does not provide tactile or auditory feedback on activation. DIMENSIONS: 3.5 x 3.5 x 0.2 inches. WEIGHT: 3 ounces. COLOR: Black case with a ch

Plate Switch

The Plate Switch is a pressure switch designed to create computer access for individuals with a physical disability. This general purpose switch requires three ounces of pressure to activate and can be used with a chin or head mount. A "click" sound provides auditory feedback. Rubber feet make the switch ideal for desktop use. The switch comes with a black 69 inch cable and 3.5 millimeter plugs at either end. DIMENSIONS: Switch measures 3-7/8 x 2 x 1-1/8 inches. Jack size is 3.5 millimeters. COL

Plate Switch (Model 702A)

The Plate Switch, model 702A, is a touch switch designed for use by individuals with upper extremity disabilities. Activated by three ounces of pressure, the switch clicks on activation for audible feedback. 

Plate Switch (Model Cm-10)

The Plate Switch is a touch switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This single switch is activated by pressing on the plate on top. An audible click accompanies activation. DIMENSIONS: 2.25 x 4.3 x 1 inches. WEIGHT: 4 ounces.

Plate Switch (Models 810, 820, 830, 821, 822, 823)

Plate Switch, models 810, 820, 830, 821, 822, and 823, is a touch switch designed to respond to the slightest pressure from any part of the body for individuals with physical disabilities. These switches are ergonomically designed so that the client's hand need only make the slightest movement to contact the sloping plate. Suction cups are provieded for ease of attachment to most surfaces. The 5 x 8 inch model is available with a built in latch or timer which allows the user to operate the switc

Plate Switch On Stand (Model 840)

Plate Switch on a Stand, model 840, is a touch switch designed to respond to slight movements from any body part for individuals with physical disabilities. This switch is mounted on a gooseneck with a heavy cast iron base. This switch can be positioned for use by various body parts, such as chin, nose, etc. DIMENSIONS: The switch surface measures 3 x 5 inches and the gooseneck is 19 inches long.

Platform Switch

The Platform Switch is a touch switch designed for use by individuals with upper extremity disabilities. This single switch consists of a square platform with a circular raised pad in the center. Activation requires 3.5 ounces of pressure and 0.1 inch of travel. Tactile and auditory feedback are provided. The rubber base prevents slippage. DIMENSIONS: 4.25 x 4.25 x 1 inches. WEIGHT: 4 ounces. COLOR: Beige base with a brown center pad.

Play Unlimited System Le9806

The Play Unlimited System No. LE9806 is a wheelchair jungle gym that provides accessible barrier-free design for physical, psychological, and therapeutic gross motor play. The system is large enough for an adult to aid children who need assistance. The gym has multiple decks that are wide enough for wheelchairs to access. ACTIVITIES: Trapeze swing, Tic-Tac-Toe, bubble panel, steering wheel enclosure, corkscrew climber, coaster climber, Lexan spiral slide, standard slide, access stairs and ramps.

Play Unlimited System Le9807

The Play Unlimited System LE9807 is a wheelchair jungle gym and climbing structure that provides young wheelchair users and able-bodied children an accessible, barrier free environment where they can engage in gross motor play. The structure has multiple decks made of a wire mesh and one access ramp. ACTIVITIES: Half-space climb, crawl tube, Lexan spiral slide, Tic- Tac-Toe board, arch climber, steering wheel enclosure, access stairs, tube slide, corkscrew climber, and rung enclosure. GROUND SPA

Play Unlimited System Le9808

The Play Unlimited System LE9808 is a wheelchair jungle gym and climbing structure that provides gross motor play activities for young wheelchair users and able-bodied children. The decks are made of metal mesh, and there is an access ramps at each end of the structure. ACTIVITIES: coaster climber, access stairs, trapeze swing, steering wheel enclosure, Lexan spiral slide, and Tic-Tac-Toe. GROUND SPACE: 28 feet 11 inches by 27 feet, 6 inches. WEIGHT: 2658 pounds. WARRANTY: 1-year on materials an

Play Unlimited System Le9809

The Play Unlimited System LE9809 is a wheelchair jungle gym and climbing structure providing an accessible, barrier-free design for wheelchair users and able-bodied children alike to engage in gross motor play. The structure has multiple decks and two end ramps. ACTIVITIES: Spiral slide, small bubble panel, suspension bridge, Tic-Tac-Toe board, steering wheel enclosure, chinning bar, rung enclosure, arch climbers, curved slide, tube slide, rung access, ramp, and climbing pole. GROUND SPACE: 36 f

Plump N' Puff Switch (Model 665)

The Plump N' Puff Switch, model 665, is a pneumatic touch switch designed for use by individuals with upper extremity disabilities.This large, dome-shaped switch has a soft, puffy feel and can be placed on a table or mounted on the Magic Arm System (see separate entry). DIMENSIONS: The hemisphere of the switch is 6 inches in diameter,

Pneumatic Switch

Single switch activated by sipping or puffing into a tube. Tube is attaches to housing where actual switch is located. Gooseneck length 13 inches. Plastic housing. Switch dimensions: 4 1/2 by 2 1/2 by 1 1/2 inches. Used with Hasten system 500-911.

Pneumatic Switch (Model Cm-3)

The Pneumatic Switch, model CM-3, designed for use by individuals with severe physical or upper extremity disabilities. This single switch is controlled by sipping or puffing. Any small change in air pressure in the tube (caused by pursing the lips, moving the tongue, etc.) causes the switch to be activated. Attaching two switches "piggy back" allows the user to operate two switches with a single mouth tube. DIMENSIONS: 2.25 x 1.5 x 1 inches. WEIGHT: 0.5 ounces.

Pneumatic Switch (Model Cm-3-1)

Pneumatic or sip and puff switch. Ultrasensitive control actuated by slightest mouth air pressure. Tubing connects to high port for puff, and low port for sipping. Allows user dual switch operation with single mouth tube. Four holes to accept mounting screws, adhesive pad for mounting. Operation requires 0.02 psi. DIMENSIONS: 2 x 1.5 x 0.5 inches. WEIGHT: 1/2 ounce.

Pneumatic Switch (Models 51000 & 51010)

The Pneumatic Switch is a dual switch designed to be activated by breathing through a tube for individuals with severe physical disabilities. Sipping on the switch activates one switch; puffing activates the other. This switch has an internal saliva trap which can be easily cleaned and the mouthpiece is a disposable straw. There are two models available: the Pneumatic-short (model 5100); and the Pneumatic-long with an extended tube for swivel clamp mounting (model 5105). DIMENSIONS: The short mo

Pneumatic Switch Kit

The Pneumatic Switch Kit is a pneumatic sip and puff switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. The switch can be activated by squeezing the included squeeze toy or with other squeeze toys, bottles, or balls. The user also can create his or her own object-based switch. The Pneumatic Switch has a 1/8-inch plug and can be used to activate communication devices, mouse interfaces or switch-adapted toys with standard 1/8-inch jac

Pointer Gripper

Head mounted pointer that has a switch operated gripper on the end. Jaws of gripper release object when switch is opened. The activating switch can be selected according to the capabilities of the user. Mounted on headband, pointer with jaws on end is approximately 10 inches long.

Pointing Training Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Board with touch switches which turn on a light, music or toy, used to train a child to point to a picture as a prerequisite to using a language board. Device takes 2 pieces of masonite or hardboard about 18 by 8 by 1/4 inches, 2 sheets of aluminum about 17 1/2 by 7 1/2 inches, 4 feet of two conductor, 22 gauge, stranded wire, 1 subminiature size plug, double sided carpet tape, masking tape and foam mounting tape or strips of foam insulation. Provides

Pointsmart

PointSmart is mouse modification software designed for use by individuals with upper extremity, neurological, or severe physical disabilities or spinal cord injury. This software program enables the user to slow down the speed of the cursor. Other features include Automatic Direction Control, which allows users to touch or bump the pointing device in the direction they wish the cursor to move and the cursor will continue to move until the mouse is touched again and then it will stop. This softwa

Polar Fleece Poncho (Model 180)

The Polar Fleece Poncho, model 180, is a poncho designed for wear by men or women who use wheelchairs. This poncho provides full lap and knee coverage when seated, with a short back so that users do not sit on excess fabric. Side tabs at the armholes prevent the cape from opening at the sides, to avoid touching or getting stuck in wheelchair wheels. The user can put the poncho on while leaning forward without standing. It is made of 100 percent polyester and 12.5-ounce Ziro-Tec fleece. The ponch

Polartec Arm Warmer ( Models 174, 175, & 176)

The Polartec Arm Warmer is an arm warmer designed for use by individuals with mobility disabilities or spinal cord injury. The outer layer is waterproof nylon and the inner layer is 200 weight Polartec. Rib knit at each end helps keep the garment in place. This garment raps body heat and keeps a seated person's arms dry. SIZES: Child, adult, and extra-large. DIMENSIONS (LxW): The child's size is 10 x 5.5 inches flat and 11 inches in diameter. The adult size is 12 x 6 inches flat and 12 inches in

Polartec Calf Warmer (Models 116, 117, & 118)

The Polartec Calf Warmer is a leg warmer designed for use by individuals with mobility disabilities or spinal cord injury. The outer layer is waterproof nylon and the inner layer is 200 weight Polartec. Designed to cover a seated person's calves, these warmers trap body heat and keeps legs dry. SIZES: Child (model 118), adult (model 116), or extra-large (model 117). COLOR: Assorted. GUARANTEE: If the order is not correct or is unsatisfactory, it may be returned within three weeks of arrival, unl

Polartec Comfy Boots

Polartec Comfy Boots are booties designed for wear by individuals who use wheelchairs. Designed for individuals who do not walk, these booties stretch with feet if they swell. The booties have Polartec uppers, neoprene soles, and front zippers to open the boot fully. The boots are machine washable. SIZES: Child; adult small, medium, large, and extra large. DIMENSIONS: Length is 5, 6, or 7 inches (Child); 8 inches (Adult Small), 9 inches (Adult Medium), 10 inches (Adult Large), 11 to 13 inches (A

Polartec Fleece Fling (Model 320)

The Polartec Fleece Fling, model 320, is a cape designed for women or girls with mobility or severe physical disabilities. Made of Polartec fleece, this cape has two deep pockets and is longer in front and shorter in back for the seated figure. This cape goes on over the head without arm insertion and has a front zipper and neck ribbing. OPTIONS: Matching cloche hat. SIZES: One size. DIMENSIONS: The front is 35 inches long and the back is 24 inches long. The zipper is 12 inches long. COLOR: Red,

Polartec Thumbless Mittens

The Polartec Thumbless Mittens are mittens designed for use by individuals with upper extremity, neurological, or severe physical disabilities, contractures of the hand, or spinal cord injury. These mittens have long cuffs to cover the forearm and no thumb to enable them to slide on over the hand from the side. Made of 200 weight Polartec fleece, these mittens zip up the side and have elastic at the wrist. SIZES: Child Small (4-inch hand); Child Medium (5-inch hand); Child Large (6-inch hand); P

Police Car (Mercedes Benz), (Model 8037)

The Police Car (Mercedes Benz), model 8037, is a switch operated toy designed for use by individuals with severe physical or upper extremity disabilities. This toy zooms in all directions with real siren sounds and flashing lights. The user activates a connected capability switch (not included) to start the action. POWER: Uses 3 double-A batteries. DIMENSIONS (HxLxW): 3.5 x 8.5 x 3.5 inches. COLOR: Silver with red and yellow stripes on the hood and lower sides. Yellow letters spell out the word

Polyester Fabric Decubitis Pad (Models 559-8060-1922, 559-8060-1923, & 559-8060-1924 )

The Polyester Fabric Decubitus Pad, models 559-8060-1922, 559-8060-1923 and 559-8060-1924, is a decubitus pad designed for use by individuals at risk for development of pressure sores or ulcers. Made of synthetic sheepskin, the pad is hypo-allergenic and machine washable. DIMENSIONS (LxW): 24 x 30 inches (model 559-8060-1922), 30 x 60 inches (559-8060-1924), or 30 x 40 inches (559-8060-1923).

Polyester Wheelchair Pads (Models Msc019470, Msc019471, Msc019472, & Msc019473)

Polyester Wheelchair Pads are footplate (model MSC019470), calf (model MSC019471), armrest (model MSC019472), and seat / back (model MSC019473) pads designed for use by individuals who use wheelchairs. These soft, flame-retardant polyester pads protect and support the arms, legs, and feet. The pads are machine washable and do not mat. The calf, armrest, and seat / back pads are latex-free.

Ponchita

The Ponchita is a capelet or shawl designed for wear by individuals who use wheelchairs. Designed specifically for the seated figure, this poncho is available in sweatshirt fleece or Polartec and goes on over the head and reaches to the waist, requiring no arm insertion. SIZE: One size. COLOR: Navy, fuschia, gray, or turquoise.

Pool Cue Cuff (Model 9462)

The Pool Cue Cuff, model 9462, is a grasping aid for hand designed for use by individuals with spinal cord injury or upper extremity disabilities. This cuff is designed to hold a pool cue for those with limited hand function. A strap holds the hand around a pool cue. It is length-adjustable and is lined with Dycem to prevent slipping. The cuff is made of suede leather with D-ring Velcro closure.

Pool Pant Diapers

Pool Pant Diapers are swim diapers designed for wear by children with urinary incontinence. Made of soft cotton flannel inside, they have adjustable Velcro closures for ease in taking on and off. The nylon outer layer helps to prevent leaks. Pool Pant Diapers are washable and reusable. OPTIONS: A matching bikini top and hat are available in three prints (fish, jungle, Dr. Frog) for a 3-piece set. COLORS: Purple, royal, rasberry, red, yellow and jade. SIZES: small (6 to 14 pounds), medium (14 t

Pool Ramp

CUSTOM ADAPTATION PURPOSE: To enable an individual with mobility disabilities to access a pool either while walking or using a wheelchair. This ramp was constructed as part of the in-ground pool as part of the shell. Made of premium plaster to prevent cracking and crumbling, the ramp is enclosed by a deck railing for support while walking. The deck was also ramped to meet the doorway of the user’s home in anticipation of a future need for a wheelchair. TITLE: Doing It Yourself. JOURNAL: Quest.

Portable Alarm (Model Pa-1)

The PA-1 Portable Alarm is an alarm unit intended for use with the "E-Z Call" (by Med Labs, see entry) nurse call switch where a central call system is not available. When the is switch plugged in the PA-1 is activated. The PA-1 emits a shrill whistle, similar to a tea kettle. POWER: 9V battery.

Portable Cd Player With Radio (Model 3414)

The Portable CD Player with Radio, model 3414, is a portable adapted compact disc player and radio designed for use by children and adults with severe physical, neurological, or upper extremity disabilities or spinal cord injury. This CD player with AM/FM radio has been adapted so the user can play a CD or activate the radio with a capability switch (not included). The unit has two jacks for the capability switch - one to play the radio and one to play a CD. The radio function requires continuou

Portable Commode Chair (Model Pcc-1) & Commode Chair (Model Cc-1)

The Portable Commode Chair, model PCC-1, is a shower and commode chair with removable arms designed for use by individuals with incontinence, mobility disabilities, severe physical disabilities, or spinal cord injury. This chair disassembles for storage and transport in the included pullman suitcase, enabling the user to have the freedom to travel. Made of chrome-plated steel tubing, the chair features two removable height- and width-adjustable round, foam-padded armrests; a backrest; a commode-

Portable Itinerant Support Frame (Model 7250)

The Portable Itinerant Support Frame, model 7250, is a support frame designed for use in therapeutic settings by individuals with physical and neurological disabilities. The ITN Support Frame is made with lightweight material for ease in transport, thus assisting therapists to provide suspended equipment treatment in remote locations. It comes with a built-in safety rotational device and a zippered carrying case. The ITN Support Frame is compatible with the following Southpaw Swings: Thera

Portable Pro Pool Lift

The Portable Pro Pool Lift is a pool lift designed for use by individuals with spinal cord injury, mobility disabilities, or severe physical disabilities. This electrically powered pool lift is fully portable and can easily be removed from poolside when not in use. It does not intrude into the pool when not in use. This lift has a sliding mechanism that allows the lift to be transported easily on its included cart and then lowered onto the pool deck for use without fastening any hardware. Other

Portable Shower Bag

The Portable Shower Bag is a shampooing aid designed for use with individuals with severe physical disabilities. Designed to be used to provide hair care for individuals who must remain in bed, the unit hangs on a bedpost or I.V. pole and holds up to two and a half gallons of water that is dispensed through an attached hose. It is lightweight and allows for a complete shampoo and rinse while being used with a shampoo tray.

Portable Solution Travel Bidet (Model Scs75)

The Portable Solution Travel Bidet, model SCS75, is a personal cleansing system designed for use by individuals with neurological, balance, mobility, or upper extremity disabilities or arthritis or spinal cord injury. The device is small enough to fit in the palm of the hand. Features include an adjustable bidet attachment, an adjustable nursing spray attachment, a feminine hygiene attachment, and a flexible extension hose. A removable wrist strap and a carrying bag are included. POWER: Uses on

Portable Stand For Hospital Computer

CUSTOM ADAPTATION PURPOSE: To enable a child in a hospital to use a computer while sitting or lying in bed or from a wheelchair. TITLE: Hospital Computer Stand. The concept for the stand was based on a cantilevered hospital bed table modified to accommodate the weight of the computer components while still being easily adjustable. Square metal tubing was used to make a stand for the table; the stand included a lockable metal box with two sheet metal doors at one end. The box houses a lockable g

Portable Transfer Aid (Model Pta 1000)

The Portable Transfer Aid, model PTA 1000, is a mechanical transfer lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This portable lift uses a hand crank to lift and transfer the user. Caster wheels provide mobility. The lift's legs can be placed either straight ahead or spread apart for transfers, or folded in for storage. When folded, it fits in the trunk of a car without disassembly and can be towed like rolling luggage. OPTIONS: Split

Portable Vertical Lift

The Portable Vertical Lift is a portable elevator designed for use by individuals with mobility disabilities. This portable lift can be set up and then stored away when not in use. It has a metal platform, a screw drive, soft touch control pads, and a keyed emergency stop. The unit's wheels are locked in position when the lift is in use. The platform has a lifting height of up to 52 inches. OPTIONS: 24-volt direct current (DC) full battery backup; straight through access with lower access on the

Positioning Chair

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with neurological disabilities. An existing Sebel Hobnob Junior Chair was modified to meet the child's specific needs. A height-adjustable footrest that slides out from under the seat was added. The chair was also equipped with glides on the legs for easier movement, and ant-tips were added to the rear legs. For more precise support, a removable lateral plywood insert was added to the seat. The insert was removable when the ch

Positioning Hardware

Positioning Hardware is seating hardware general designed for attaching positioning aids to wheelchairs. Available items include two-, four-, six-, and eight-hole adjustment hooks; drop hooks; drop hooks for thigh pad inner mount; drop hooks for thigh pad outer mount; side, bottom, and parallel flanges; latch tabs; universal rear bracket; and a swing tab U-bracket. Also available is a seatlock; a seatblock; a headrest mounting plate; a child's headrest support; an adult headrest support; and six

Positioning Table

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with neurological disabilities. This table is designed to provide the child with proper postural positioning while allowing the child to concentrate on eating, playing, or educational activities while at the table. The table was made of plywood to dimensions specified by the child's therapist and provides space for two children. The table is height adjustable and has a torso cutout at one end to provide the child with close ac

Positioning Wedge (Model 954)

The Positioning Wedge, model 954, is a positioning wedge designed for use by individuals with mobility, severe physical or neurological disabilities or spinal cord injuries. These wedges are intended to provide gentle support when positioning an individual in a supine or prone position. DIMENSIONS (HxLxW): 10.5 x 24 x 26 inches. COLOR: Black, space blue, regimental blue, blue ridge, forest green, dusty jade, burgundy, chestnut, sand, camel or mauve.

Possum Compact

The Possum Compact is a remote environmental control unit designed for use by individuals with mobility disabilities, severe physical disabilities, or spinal cord injury. This unit's programmable menu functions allow remote control of household electrical appliances and security and access systems. Although most functions are controlled via infrared, a radio transmitter is also provided for emergency functions such as triggering an alarm, pager, or door opener. All programmed functions can be vi

Possum Freeway (Model Hc2000B)

The Possum Freeway, model HC2000B, is a portable environmental control unit designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. This unit provides simple remote control of domestic appliances such as TV, video, stereo, lights, lamps, power sockets, alarms, intercoms, door, window and curtain openers, loud speaking telephones, and pagers. The unit has a large backlit scanning display with the option of icons or text. Functions can be changed by slo

Postur Vest (Models 6528 & 6529 )

The Postur Vest is a torso support and harness restraint designed for use children, adults, and juniors with physical or balance disabilities. The H-style harness vest is made of soft padding and has adjustable hook- and-loop fasteners. The child size features a cartoon designs and the adult/junior has a plain front. This latex-free and machine- washable vest fastens over the back of wheelchairs or regular chairs. SIZES: Child (model 6528) and Adult/Junior (model 6529).

Posture Assisted Lying Systems (PAL)

Posture Assisted Lying Systems (PAL) is designed for posture management in children with limited mobility as a result of cerebral palsy, traumatic brain injury or stroke.  It is designed to be transported. The block helps to support the hips in lying and consists of a central wedge, adjustable supports for legs and a pelvic strap. The material is breathable, washable and bacteria resistant.  While children are using the block, their position can be changed without removing components. It can be

Posture Buzzer (Model 1140)

The Posture Buzzer, model 1140, is a posture switch designed to provide posture training for individuals with physical disabilities. This miniature mercury switch sounds when a body part is tilted beyond pre-set angle. It is the size of quarter and may be worn anywhere on body.

Posture Monitor

The Posture Monitor is a biofeedback device designed to support individuals who have a limited physical control and difficulty maintaining appropriate posture due to neurological deficits. Its purpose is to promote attention given to maintaining proper trunk alignment by individuals seated in wheelchairs, thus encouraging a seated position that offers greater functionality; enhances learning, self esteem, and mobility; and improves physiological factors such as respiration, circulation and diges

Posturetex-Multiway Cushion

Posturetex-multiway cushion is designed for individuals with limited mobility and use a wheelchair or a scooter for mobility. It is a versatile cushion featuring a 2 inch nodular foam base as well as a 2 inch nodular foam back which can be folded in half to make a 4 inch base cushion. The 2 inch base cushion is available with standard or coccyx cut out. Covered in black jacquard velvet which is removable for machine washing and a carry handle easy transportation. Spare covers are also available

Pouring Aids

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with Friedrich's ataxia to dispense food and beveragesthat come in difficult-to-use containers. Put foods such as flour, rice, and sugar into airtight juice containers with handles. Put milk and juice in sports-cap bottles. MATERIALS: Airtight juice bottles with handles and sports bottles. AUTHOR: Labbe, A. TITLE: Quest Extra: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.org/publications/quest/extra/qe14-5_diy.html REF: V

Pouring Cup On Stand (Model 20)

The Pouring Cup on Stand, model 20, is a pouring aid designed for use by individuals with grasping, upper extremity, or severe physical disabilities. This stand-mounted pouring cup allows the user to pour liquids or flour into a container by activating a switch. A second switch returns the cup to an upright position. Cups are marked for measuring, and removable for cleaning. POWER: Uses 4 double-A batteries. OPTION: Replacement cup set with of 2 modified and 2 bottom cups (20X). DIMENSIONS (HxLx

Power Access Residential Door Opener (Model 2300)

The Power Access Residential Door Opener, model 2300, is a powered door opener and closer designed for use by individuals with upper extremity or mobility disabilities or spinal cord injury. The unit fits in most interior and some exterior doors. Left- and right-hand door openers are available, and the hand is adaptable. The unit has a low profile to fit when there is limited room above the door. Safety features include the ability to be opened manually from either side; a friction clutch that c

Power Buddy

The Power Buddy is a USB charger for powered wheelchairs and wheelchair light designed for use by individuals with lower extremity, mobility or severe physical disabilities. The unit plugs into the charger port of the wheelchair controller and enables the user to charge cell phones, MP3 players, tablet computers, and other USB devices while in the wheelchair. A universal USB adapter is included. The unit is equipped with a flexible gooseneck to enable positioning to meet the user's needs. The un

Power Chair Joystick Cover (Model V2200)

The Power Chair Joystick Cover, model V2200, is a powered wheelchair control cover designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. Made of urethane covered water-resistant nylon with a transparent plastic panel over the joystick, this cover fits around the controller to protect it from dirt and moisture while still allowing use. DIMENSIONS (HxWxD): 14 x 5 x 4 inches.

Power Ez Lift

The Power EZ Lift is a pool lift designed for use by individuals with spinal cord injury, mobility disabilities, or severe physical disabilities. This fully automatic lift has an adjustable mesh sling style seat and a rotation bar to allow an attendant to rotate the unit. The lift has stainless steel construction and a UV resistant powder coat finish. Additional features include battery operated actuator, submergible remote control, concrete embedded anchor system, rechargeable battery operation

Power Headrest

The Power Headrest is a powered headrest and driving control system designed for use by individuals with upper extremity disabilities, severe physical disabilities, or spinal cord injury. This headrest features motorized activation to swing it into position for driving and to the storage position for unencumbered exit and entry into driving position. Its driving control function enables drivers with disabilities that limit hand/finger usage while driving to access turn signals, horn, dimmer, wip

Powerhouse Home

The Powerhouse Home is an environmental control system designed for use by individuals with spinal cord injury, severe physical disabilities, or upper extremity disabilities. This system enables the user to control an unlimited number of lights, appliances, heating and cooling systems, infrared devices (home entertainment components), electric beds, home security systems, X10 devices, and countless other devices by voice command. One device or groups of devices can be controlled with a single co

Powerhouse Roommate Plus

The Powerhouse Roommate Plus is an environmental control unit designed for use by individuals with spinal cord injury, severe physical disabilities, or upper extremity disabilities. This system enables the user to control virtually unlimited X-10 devices and infrared devices (home entertainment components) in a single room by voice command. No voice training is required as the sytem is speaker independent. The system also offers the ability to use the included wireless telephone headset as a mic

Powerlinc Ii

PowerLinc II is an evironmental control unit designed for use by individuals with severe physical disabilities and spinal cord injury. When attached to a personal computer serial port, this unit can be used to send and receive X10 commands, including advanced extended codes, using ASCII. It can also be used to send X10 commands using the original TW523 protocol, but the TW523 protocol cannot receive extended X10 codes. The unit also provides 12 volts direct current (DC) power for applications. A

Prc Dual Rocking Lever Switch (Model Rl-2M)

The PRC Dual Rocking Lever Switch is a dual rocker switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This switch is operated by pressing on either end of a plate located on top of the unit, with medium force. One end of the plate activates one switch, the opposite end activates another. The housing is made of plastic and is equipped with rubber feet and a threaded hole for mounting. DIMENSIONS (LxWxH) 3.875 x 2 x 1.5 inches. WEIGHT

Prc Pneumatic Switch (Model Ps-3)

The PRC Pneumatic Switch, model PS-3, is a dual pneumatic (sip/puff) switch designed for use by individuals with severe physical disabilities or spinal cord injury. Sipping on the mouthpiece attached to a tube activates one switch; puffing on the tube activates another. The change in the air pressure in the unit is transferred down the tube to a switching unit, thereby activating the switch. OPTIONS: Set of 10 extra puff tubes. DIMENSIONS: 24 inches long.

Prc Single Rocking Lever Switch (Model Rl-1M)

The PRC Single Rocking Lever Switch is a rocker switch activated by depressing the plate on top of the device. The switch housing is made of plastic, has rubber feet on the bottom, and a threaded hole for mounting. WEIGHT: 3.9 ounces.

Prc Wobble Switch (Model Ws-1)

The PRC Wobble Switch, model WS-1, is a pressure-sensitive joystick single switch designed for use by individuals with severe physical disabilities or spinal cord injury. The switch is activated by pushing against a lever. The lever has a built-in spring and can be pushed in any direction for activation by gross movements. The switch is equipped with a threaded hole for mounting. WEIGHT: 1.8 ounces.

Pre-Writing Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: A child using a metal bolt as a writing implement can activate a tape player or other device by tracing the appropriate path on a metal cookie sheet. This activity strengthens fine motor and grasping skills. Describes a motion detection switch, constructed by soldering a subminiature plug to one end of a 4 inch conductor wire and wrapping the other end tightly around a 4 inch long metal bolt. Simple paths or letters are cut from paper or cardboard and

Premium Activity Hoops

These Premium Activity Hoops are designed for use by individuals that have mobility issues. They can be used for many different drills or exercises to work on proprioceptive and vestibular input. In addition, its design can be used for working on hopping, balancing, bilateral skills, motor planning, core body stability, lower extremity strength, etc. Set includes 5 clips for snapping the hoops together in all planes.

Premium Guard Water Mattress (Model 14400)

The Premium Guard Water Mattress, model 14400, is a water flotation mattress designed for use by individuals at risk for pressure sores/decubitis ulcers. Three water baffles enhance movement and support to reduce pressure and conform to varying body weights. OPTIONS: Fill hose (model 14401). DIMENSIONS: 3 x 72 x 34 inches. WEIGHT: 45 pounds.

Pressalit Care Fixed Changing Table

The Pressalit Care Fixed Changing Table is a changing table designed for use with children with multiple disabilities. This changing table is wall mounted at a fixed height and has a head support area that can be elevated. An integrated gas cylinder folds up the table when it is not in use. DIMENSIONS: Available in two lengths: 71 inches or 55 inches.

Pressalit Care Height Adjustable Changing Table

The Pressalit Care Height Adjustable Changing Table is a changing table is a changing table designed for use by children with multiple disabilities. This height-adjustable table has a head support area that can be elevated. It can be used for changing or bathing and has remote-controlled low-voltage operation for safe showering. When not in use, the table can be folded with an integrated gas cylinder. DIMENSIONS: Available in two lengths, 55 or 71 inches.

Pressure Belts

Pressure Belts are pressure garments designed for use in therapeutic sensory integration activities with individuals with neurological or physical disabilities. Made of neoprene with Velcro closure, the belts are designed to be worn discreetly under clothing to provide deep calming pressure input. SIZES: Belts are available to fit waist sizes 30, 40, and 50 inches. DIMENSIONS: 8 inches wide. COLOR: Blue.

Pressure Switch

The Pressure Switch is a single touch switch designed for use by children with physical disabilities. The switch is activated by lightly pressing on a large plastic plate attached to a wooden base. The switch is available with a choice of a mini plug or a sub miniplug. DIMENSIONS: 7 x 10 inches.

Pressure Switch

Pressure Switch is designed to be worn on the upper arm, lower arm, knee, etc. Pressure against the switch activates it. DIMENSIONS: 1.5 x 0.5 inches.

Pressure Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Switch activated by light pressure on the top surface, sturdy enough to be sat or stood on, with a wide variety of uses, including weight bearing and cause and effect training. Switch, about 7 by 10 by 2 inches, made of masonite or hardboard, two conductor 22 gauge stranded wire, a subminiature plug, a subminiroller lever switch and foam rubber. Includes photograph, instructions and diagrams. Describes a variation (lack of pressure turns on the switch)

Pressure, Vacuum, Differential Switch (Model D1000A)

Pneumatic switch. Momentary on. Activated by low pressure air pulse. Electrical rating of air pulse switch depends on type of air pulse. Fast and large pulse causes contacts to close rapidly and allows larger electrical rating. Molded polypropylene with silicone rubber diaphragm. Gold flashed solid silver contacts. 1.65 inches high by 1.57 inches wide by 1.69 inches deep. Weight 0.9 ounces. Electrical rating: 0.5 amps, 250 volts.

Primo! Touchscreen Controller

Primo! Controller is a touchscreen environmental control module designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. This module for controlling the home environment has a touch-sensitive, dynamic screen in an ergonomically styled, lightweight case. It holds up to 140 captured infrared codes as well as embedded Possum and Gewa codes in multiple menus. A library of 104 generic clear icons and text labels and 18 'get started’ device templates are inc

PRiO

The PRiO is an iPad based communication tool made for people with communication disabilities, neurological or spinal cord injury or any severe physical disability, who already established vocabulary skills. It is designed to help them establish vocabulary and motor planning skills. It features iPad Air and the popular Language Acquisition through Motor Planning (LAMP) Words for Life (WFL) Vocabulary.

PRiO Mini

The PRiO Mini is an iPad based communication tool featuring the iPad-mini and the popular Language Acquisition through Motor Planning (LAMP) Words for Life (WFL) Vocabulary and iPad-mini. It helps people with already established vocabulary skills, with communication disabilities, neurological or spinal cord injury or any severe physical disability, establish vocabulary and motor planning skills.

Prism Glasses

The Prism Glasses are designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. These glasses have right angle prisms to provide a 90-degree downward angle to enable users to read, write, or watch television while lying down without lifting or moving their heads. These glasses are made of high-impact styrene.

Priva Adult Mealtime Clothing Protectors (Model P13836)

The Priva Adult Mealtime Clothing Protector, model P13836, is an adult bib made of 100% brushed cotton lined with a 100% waterproof barrier layer to ensure protection from spills or scalding from hot fluids. The bibs are easy to fit with stainless steel snap closures. The full length ensures complete protection while seated or in bed. COLOR: Plaid. DIMENSIONS: 18 x 36 inches.

Privacy Cover

The Privacy Cover is a catheter collection bag cover designed for use by individuals with spinal cord injury or severe physical disabilities. Made of durable, weather-resistant packcloth, the cover attaches to a wheelchair or bedrail and the urinary drainage bag hangs inside the cover on a polycarbonate support bar. A hook-and-loop strap stabilizes the bag. A front modesty panel may be kept open to monitor urinary output or closed for privacy. The cover does not have to be removed to drain the b

Pro Forma Matrix Wheelchair Seating And Positioning

Pro Forma Matrix Wheelchair Seating and Positioning are custom wheelchair back and seat supports designed for use by individuals who use wheelchairs. This system offers offers total body contouring and wheelchair backs is light and strong, making custom wheelchair seating and positioning quicker and easier. The Pro Forma Matrix can be fitted to a wide range of users as preformed Direct Wheelchair Backs or Full Body Wheelchair Seating. The Pro Forma Matrix is supplied as rectangular sheets, pre-f

Pro Ii All Body

The Pro 2 All Body, model AB6400, is a hand propelled bicycle exerciser designed for use by individuals with lower extremity or mobility disabilities or spinal cord injuries. The hand cranks turn in unison, so the arms can do the work and still involve the legs passively, or the strong side of the body can support the weaker side. For orthopedic rehabilitation, the range of motion can be altered as rehabilitation progresses. The Pro II features step through seat positioning or direct wheelchair

Pro Pool Lift

The Pro Pool Lift is designed for use by individuals with spinal cord injury, mobility disabilities, or severe physical disabilities. The Pro Pool Lift is fully automatic. It features a compact, lightweight design which does not intrude on the pool unless in use and the chair-mounted self-operated controls are intended to ensure smooth operation. The Pro Pool Lift comes standard with stainless steel construction; an UV resistant powder coat finish; an adjustable flip-up footrest; and adjustable

Pro Spa 60 Lift

The Pro Spa 60 Lift is a pool and hot tub lift designed for use by individuals with spinal cord injury or lower extremity, mobility or severe physical disabilities for access to an above-ground spa or hot tub. The Pro Spa 60 Lift has a heavy duty wide seat, dual flip-up arm rests, pull-out leg rest, and adjustable lap belt. Additional features include submergible remote control and a concrete embedded anchor system. The lift is constructed of stainless steel and has a UV resistant powder coat f

Procontour Comfort Cushion

The ProContour ComforT is an air floatation seat cushion designed for use by individuals with severe physical, mobility, or lower extremity disabilities, pressure sores and/or ulcers, and spinal cord injuries. The cushion reduces seat interface temperature, helping to avoid tissue maceration, and pressure sores. As the individual seated on the cushion moves, the cushion adjusts itself to eliminate pressure peaks and provide even, stable support. The seat absorbs excess heat from the user, thus

Profiler Mounting System

The Profiler Mounting System is a wheelchair mounting kit for communicators. This system mounts to wheelchairs, walkers, hospital beds, strollers, or tables. Lightweight and adjustable, the unit is available for mounting on square or round tubing (specify choice) and can be moved to the side with the lift of a single lever when not in use. This system accommodates most communicators and notebook computers. The unit supports up to 15 pounds. OPTIONS: A variety of mounting plates and release optio

Profiler-Lite Mounting System

The Profiler-Lite Mounting System is a wheelchair mounting kit for communicators or switch mounting hardware. This system mounts to wheelchairs, walkers, hospital beds, strollers, or tables with square, oblong, or round tubing. This system accommodates lightweight communicators and most switches and supports up to five pounds, including pressure on the device. The unit can be mounted on the right or the left side and the universal base mount can be adjusted 360 degrees from front to back and 180

Programmable Foot Switch

The Programmable Foot Switch is designed for use by individuals with upper extremity disabilities. This programmable switch enables mouse or keyboard functions to be performed with a foot. Keyboard functions such as shift, enter or space can be remapped to and entered by one of the three foot pedals. Each pedal can also be programmed to perform macros or key sequences up to 13 characters in length. Included with the switch is Windows software which enables the unit to perform left, right, or cen

Promax

The ProMax is a transcutaneous electrical nerve stimulator (TENS) that is designed to minimize chronic and acute pain associated with neurological and severe physical disabilities. This device features pulse duration compensation and true strength duration modulation to ensure the continuous stimulation of sensory nerve thresholds. It also has a "soft turn-on" feature that automatically shuts off power to the unit if an electrode or leadwire comes loose, and all leadwires are recessed into the

Pronto M51 Power Wheelchair

The Invacare Pronto M51 Power Wheelchair is designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME (HxLxW): 35 to 37 x 34 to 40 x 24 inches. Power base with six wheels for stability and a tight overall turning radius of 21.5 inches for accessability. The chair comes in a choice of candy red or deep blue shroud colors.CONTROLS: Fully programable MKIV-RII electronics for precise driver control with an adjustable joystick mount.

Pronto M71 Power Wheelchair

The Invacare Pronto M51 Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Disassembles without tools for transport. The chair is available in a choice of candy red, deep blue, or magic black shroud colors. CONTROLS: Fully programable MKIV-RII electronics with an adjustable joystick mount. CWD: The center-wheel drive positions the drive wheels directly beneath the individual's cent

Pronto M9I Power Wheelchair

The Invacare Pronto M9I Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Six-wheel power base with a tight overall turning radius of 21.5 inches for accessability. CONTROLS: Fully programable MKIV-RII electronics for precise driver control. CWD: Center wheel drive. The center-wheel drive positions the drive wheels directly beneath the individual's center-of-gravity. SEAT: The v

Prop-It Book Rest

The Prop-It Book Rest is a bookholder designed for use by individuals with upper extremity disabilities, grasping disabilities, or arthritis. This unit holds any size printed material. It has an elastic page holder that keeps books open and loose material secure. DIMENSIONS: 8 x 11 inches when closed.

Prophet

Prophet is a word prediction program designed for use by individuals with upper extremity disabilities. This program allows users to type long words with as few as two key strokes. It supports speech output and switch input through Switch Access for Windows (SAW). This word prediction program automatically learns any new words typed and updates its on-screen word lists to reflect the user's writing style and frequency of word use. As the user types the first one or two letters of a word, the pro

Proportional Head Control

The Proportional Head Control is a powered wheelchair controller designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. This headrest-based joystick enables the user to control a power wheelchair by rotating his or her head on a headrest pad. This controller is available for P&G electronic controls.

Proximity Sensor (Model Prx-101)

The Proximity Sensor, model PRX-101, is a sensor switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This single-function switch requires no touch or pressure. This proximity switch can detect something that has an electronic capacitance, such as a hand or finger up to one-quarter inch away. When used with a sensor output and a power supply, this sensor gives the user switch access to a number of components using a 1/8 mono jack. POW

Proximity Sensor (Model Prx-102)

The Proximity Sensor, model PRX-102, is a sensor switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This single-function switch requires no touch or pressure. This proximity switch can detect something that has an electronic capacitance, such as a hand or finger up to one-quarter inch away. When used with a sensor output and a power supply, this sensor gives the user switch access to a number of components using a 1/8 mono jack. POW

Proximity Sensor (Model Prx-103)

The Proximity Sensor, model PRX-103, is a sensor switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This non-adjustable single-function switch requires no touch or pressure. This proximity switch can detect something that has an electronic capacitance, such as a hand or finger up to one-quarter inch away. This sensor ignores non-capacitive materials and is mountable on a headrest or tray. When used with a sensor output and a power s

Proximity Sensor (Prx-104)

The Proximity Sensor, model PRX-104, is a sensor switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This adjustable single-function switch requires no touch or pressure. This proximity switch can detect something that has an electronic capacitance, such as a hand or finger up to one-quarter inch away. This sensor ignores non-capacitive materials and is mountable on a headrest or tray. When used with a sensor output and a power suppl

Psychedilic Hippo (Model 899)

The Psychedilic Hippo, model 899, is a switch operated toy designed for use by children with upper extremity or severe physical disabilities or spinal cord injury. This plush toy has been adapted with a jack for a switch (not included), and when the switch is activated, the hippo walks, growls, wags its tail. POWER: Uses two C batteries (not included). COLOR: Varies.

Public Transportation Signs And Words

Public Transportation Sgns and Words is a personal skills and independent living skills tutorial program designed for use with individuals with cognitive or developmental disabilities. This program teaches 80 signs and words which are essential for getting around in the community, including arrivals, airport, ask for assistance, bus station, gate security check, count your change, tokens, and transfer. Multimedia software combines live action video and human-quality audio in an adult format. Cor

Puff-N-Sip Activated Phone (Model 1900 Va)

Puff-N-Sip Activated Phone, model 1900 VA, is a voice activated speakerphone with sip-n-puff capability intended for use by people with mobility and upper extremity disabilities. No manipulation or operation of switches or other mechanical devices is required for complete control of this telephone. To activate the dialing mode and turn the speakerphone on, the user puffs into the mouthpiece. Sipping on the mothpiece dials "0" for a local operator. To dial "00" for a long distance operator, the u

Puffin the Sip-and-Puff Joystick Controller

Puffin the Sip-and-Puff Joystick Controller is a low-cost sip-and-puff joystick for persons with severe physical disabilities, neurological disabilities, or spinal cord injury that allows the user to control a smartphone, laptop or tablet. It is known to help people living with various disabilities, including paraplegia and cerebral palsy, diabetes, neuropathic facial pain and hearing and vision impairments. The overall design as well as the components include something to hold the mouse, a phys

Pull And Play Switch (Model 8042)

The Pull and Play Switch, model 8042, is a pull switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This switch mounts to a tabletop, wheelchair tray or bedrail for easy access. It comes with two interchangeable grips: a ball with holes and a T grip. A C-Clamp is included. DIMENSIONS (HxW): 21 x 7 inches.

Pull Switch

The Pull Switch is a single switch designed for use by individuals with physical disabilities. The switch is activated by pulling on a ring attached to a cord. The switch is designed to be suspended above the user with the ring hanging down. DIMENSIONS: 5 inches in diameter.

Pull Switch & Overhead Pull Switch (Model 850, 850-8, 780, 780-8)

Pull Switch and Overhead Pull Switch, models 850, 850-8, 780, and 780-8 are pull switches designed to enhance grasping skills for individuals who are physically disabled. They are activated by a gentle tug on a ring or ball. The Pull Switch, model 850 and 850-8 ($25), comes with suction cups for mounting and a ball. The Overhead Pull Switch, models 780 and 780-8 ($36), is mounted on a flexible gooseneck which can be attached to most surfaces via a 3-way clamp. It comes with an interchangeable ba

Pull Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Switch can be operated by a gentle pull but is also sturdy enough for a child who pulls hard. Can be suspended over a child lying on back or semi-reclined to encourage reach and grasp. Switch will activate a battery toy, light or tape recorder. Device is constructed of potato chip can with metal bottom or tennis ball can, jump rope with handle, tennis ball, metal jar lid smaller than diameter of can, rubber band, popsickle stick, 2 pieces of plastic co

Pull-Ons Swim Diapers

Pull-Ons Swim Diapers are swim diapers designed for wear by children with urinary incontinence. Made of soft cotton flannel with a nylon outer layer, they have elasticized legs and waist for ease in pulling on and preventing leaks. Pull-Ons Swim Diapers are washable and reusable. OPTIONS: Matching bikini tops are available. A matching bikini top and hat are available in denim. COLORS: Royal, red, yellow and patterns of fish, jungle and Dr. Frog. Pull-Ons Swim Diapers are available in deni

Pulman International Comfort Shoe

The Pulman International Comfort Shoes are shoes designed for use by individuals with arthritis and mobility disabilities.The entire front of the shoe opens and lifts. The shoe is made of velour and features removable, soft foam insoles and a zippered back seam to accommodate swelling. Soles are a molded polyurethane. These shoes are machine washable in warm water and include a drying form to maintain their shape. SIZES: Women's sizes 5 to 13 and men's sizes 5 to 15. COLOR: Brown.

Pupilmouse

PupilMouse is a mouse emulator designed for use by individuals with severe physical disabilities, neurological disabilities, or spinal cord injury. This mouse emulator enables the user to move a computer cursor by head movement, and to click or drag by winking. Either eye can be used for click and drag, and glasses can be worn. To use the device, a camera is directed to the face of the user; no settings are necessary. The device can also be operated through other switches.

Puppet Box

CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities with access to hearing testing. This box is used with children who are unable to understand instructions to signify when they hear certain sounds or are physically unable to do so. Instead, the child is taught to turn his/her head when a certain sound is heard, an instruction that is reinforced by lighting a puppet in the box. The box is painted with blackboard paint for a matte finish that does not reflect light. A black

Puppy Dog (Model 889)

The Puppy Dog, model 990, is a switch-operated toy designed for use by children with severe physical or mobility disabilities. Dressed in a harness, this plush dog walks, swings its head, barks, and wags its tail when an attached switch is activated (not included). POWER: Uses two double-A batteries (not included). DIMENSIONS (LxH):5 x 6 inches.

Push & Go Crab (Model 3106)

The Push & Go Crab, model 3106, is a switch operated or touch activated toy designed for use by children with severe physical or upper extremity disabilities. Activating a connected capability switch (not included) causes this colorful crab to scuttle sideways. Its claws open and close, while its eyes move back and forth. The crab also plays three silly songs and three funny sound effects. This toy can also be activated by pushing on the shell. POWER: Uses 3 triple-A batteries. DIMENSIONS

Push And See Giraffe (Model 1435)

The Push and See Giraffe, model 1435, is a switched operated toy designed for use by children with neurological, upper extremity, fine motor or severe physical disabilities. The giraffe is activated by three different actions - activating a connected capability switch (required but not included) initiates fun sounds and tunes; pushing down on the giraffe’s tail starts the spinning kaleidoscope patterns; or spinning the giraffe’s head results in a clacking sound. The toy has a sturdy base with s

Push Button (Model B225)

Button switch. Shock proof push button air actuator for use with momentary, on off and sequencing air switches. Push button is backed with a small, flexible bellow contained in a plastic cylinder and connected by means of a flexible tube to the pressure switch. Pressing the push button sends a low pressure air pulse through the tubing, activating the pressure switch. Push button contains no electrical components. Available in white, chrome, or gold finish.